Tibiofemoral articulation and axial tibial rotation of the knee after a cruciate retaining total knee arthroplasty.

PURPOSE: Numerous research has reported that total knee arthroplasty (TKA) cannot reproduce axial tibial rotations of normal knees. The objective of this study was to measure the tibiofemoral articular contact motions and axial tibial rotations of TKA knees to investigate the mechanism causing the knee kinematics change of after TKAs. METHODS: Eleven patients with unilateral cruciate retaining (CR) TKA were tested for measurements of knee motion during a weight-bearing flexion from 0° to 105° using an imaging technique. The tibiofemoral contact kinematics were determined using the contact points on medial and lateral surfaces of the tibia and femoral condyles. Axial tibial rotations were calculated using the differences between the medial and lateral articulation distances on the femoral condyles and tibial surfaces at each flexion interval of 15°. RESULTS: On femoral condyles, articular contact distances are consistently longer on the medial than on the lateral sides (p < 0.05) up to 60° of flexion, corresponding to internal tibial rotations (e.g., 1.3° ± 1.0° at 15-30° interval). On tibial surfaces, the articular contact point on the medial side moved more posteriorly than on the lateral side at low flexion angles, corresponding to external tibial rotations (e.g., -1.4° ± 1.8° at 15-30° interval); and more anteriorly than on the lateral sides at mid-range flexion, corresponding to internal tibial rotations (e.g., 0.8° ± 1.7° at 45-60° interval). At higher flexion, articular motions on both femoral condyles and tibial surfaces caused minimal changes in tibial rotations. CONCLUSIONS: These results indicate that the axial tibial rotations of these TKA knees were mainly attributed to asymmetric articulations on the medial and lateral femoral condyles and tibial surfaces. The data can help understand the mechanisms causing axial tibial rotations of TKA knees and help improve implant designs for restoration of normal knee kinematics.

Light-induced giant enhancement of nonreciprocal transport at KTaO3-based interfaces.

Nonlinear transport is a unique functionality of noncentrosymmetric systems, which reflects profound physics, such as spin-orbit interaction, superconductivity and band geometry. However, it remains highly challenging to enhance the nonreciprocal transport for promising rectification devices. Here, we observe a light-induced giant enhancement of nonreciprocal transport at the superconducting and epitaxial CaZrO3/KTaO3 (111) interfaces. The nonreciprocal transport coefficient undergoes a giant increase with three orders of magnitude up to 105 A-1 T-1. Furthermore, a strong Rashba spin-orbit coupling effective field of 14.7 T is achieved with abundant high-mobility photocarriers under ultraviolet illumination, which accounts for the giant enhancement of nonreciprocal transport coefficient. Our first-principles calculations further disclose the stronger Rashba spin-orbit coupling strength and the longer relaxation time in the photocarrier excitation process, bridging the light-property quantitative relationship. Our work provides an alternative pathway to boost nonreciprocal transport in noncentrosymmetric systems and facilitates the promising applications in opto-rectification devices and spin-orbitronic devices.

An in Vivo, Three-Dimensional (3D), Functional Centers of Rotation of the Healthy Cervical Spine.

OBJECTIVE: This study examined cervical center of rotation (COR) positions in 7 postures using validated cone beam computed tomography (CBCT) combined with 3D-3D registration in healthy volunteers. METHODS: CBCT scans were performed on 20 healthy volunteers in 7 functional positions, constructing a three-dimensional (3D) model. Images were registered to the neutral position using 3D-3D registration, allowing analysis of kinematic differences and rotational axes. COR measurements were obtained for each segment (C2/3 to C6/7) in each posture. RESULTS: The CORs of C2/3 to C6/7 were predominantly posterior (-5.3 ± 3.8 ∼ -0.6 ± 1.2 mm) and superior (16.5 ± 6.0 ∼ 23.6 ± 3.2 mm) to the intervertebral disc's geometric center (GC) in flexion and extension. However, the C4/5 segment's COR was anterior to the GC (2.0 ± 9.8 mm) during flexion and close to it in the right-left direction. During left-right twisting, the CORs of C2/3-C6/7 were posterior (-21.8 ± 10.5 ∼-0.9 ± 0.8 mm) and superior (3.1 ± 7.5 ∼23.2 ± 3.6 mm) to the GCs in anterior-posterior and superior-inferior directions, without consistent right-left directionality. During left-right bending, each segment's COR was predominantly posterior (-25.2 ± 13.1 ∼-6.5 ± 9.9 mm) and superior (0.3 ± 12.5 ∼12.1 ± 5.1 mm) to the GC in anterior-posterior and superior-inferior directions, except for the C2/3 segment, located inferiorly (-5.9 ± 4.1 mm) in left bending. The right-left COR position varied across segments. CONCLUSIONS: Our findings reveal segment-specific and posture-dependent COR variations. Notably, the CORs of C3/4, C4/5, and C5/6 consistently align near the intervertebral disc's GC at different postures, supporting their suitability for total disc replacement surgery within the C3/4 to C5/6 segments.

In Vivo Analysis of Acromioclavicular Kinematics and Distance During Multiplanar Humeral Elevation.

BACKGROUND: Knowledge of acromioclavicular (AC) joint kinematics and distance may provide insight into the biomechanical function and development of new treatment methods. However, accurate data on in vivo AC kinematics and distance between the clavicle and acromion remain unknown. PURPOSE/HYPOTHESIS: The purpose of this study was to investigate 3-dimensional AC kinematics and distance during arm elevation in abduction, scaption, and forward flexion in a healthy population. It was hypothesized that AC kinematics and distance would vary with the elevation angle and plane of the arm. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 19 shoulders of healthy participants were enrolled. AC kinematics and distance were investigated with a combined dual fluoroscopic imaging system and computed tomography. Rotation and translation of the AC joint were calculated. The AC distance was measured as the minimum distance between the medial border of the acromion and the articular surface of the distal clavicle (ASDC). The minimum distance point (MDP) ratio was defined as the length between the MDP and the posterior edge of the ASDC divided by the anterior-posterior length of the ASDC. AC kinematics and distance between different elevation planes and angles were compared. RESULTS: Progressive internal rotation, upward rotation, and posterior tilt of the AC joint were observed in all elevation planes. The scapula rotated more upward relative to the clavicle in abduction than in scaption (P = .002) and flexion (P = .005). The arm elevation angle significantly affected translation of the AC joint. The acromion translated more laterally and more posteriorly in scaption than in abduction (P < .001). The AC distance decreased from the initial position to 75° in all planes and was significantly greater in flexion (P < .001). The MDP ratio significantly increased with the elevation angle (P < .001). CONCLUSION: Progressive rotation and significant translation of the AC joint were observed in different elevation planes. The AC distance decreased with the elevation angle from the initial position to 75°. The minimum distance between the ASDC and the medial border of the acromion moved anteriorly as the shoulder elevation angle increased. CLINICAL RELEVANCE: These results could serve as benchmark data for future studies aiming to improve the surgical treatment of AC joint abnormalities to restore optimal function.

Evaluation of bone mineral density in adolescent idiopathic scoliosis using a three-dimensional finite element model: a retrospective study.

BACKGROUND: Adolescent idiopathic scoliosis (AIS) is often accompanied by osteopenia and osteoporosis, which can cause serious complications. The aim of this study was to determine the specific bone mineral density (BMD) of each vertebral body in patients with AIS using biomechanical finite element modeling based on three-dimensional (3D) reconstruction. METHODS: This retrospective study involved 56 patients with AIS. Computed tomography (CT) and radiography were performed. Spinal vertebrae were segmented from the spinal CT images of patients with AIS to reconstruct 3D vertebral models. The vertebral models were meshed into tetrahedral finite elements to assess the BMD. RESULTS: The mean main curve Cobb angle was 88.6 ± 36.7°, and the mean kyphosis angle was 36.8 ± 31.5°. The mean BMD of the global spine was 0.83 ± 0.15 g/cm2. The highest BMD was measured on the concave side of the apex (0.98 ± 0.16 g/cm2). Apical vertebral BMD was negatively correlated with age and height (r = - 0.490, p = 0.009 and r = - 0.478, p = 0.043, respectively). There were no significant differences in BMD values between the concave and convex sides (p > 0.05). CONCLUSIONS: The 3D finite element modeling of BMD in patients with AIS is a reliable and accurate BMD measurement method. Using this method, the overall BMD of patients with AIS was shown to gradually decrease from the top to the bottom of the spine. Our findings provide valuable insights for surgical planning, choice of screw trajectories, and additional biomechanical analyzes using finite element models in the context of scoliosis.

Muscle Belly Repair: Biomechanical Assessment of the Anchor Suture and the Modified Kessler Techniques.

Background: Treatment of muscle belly lacerations remains a problem for surgeons. Inadequate repair of lacerations can cause functional disability. To date, there is no consensus on the method of repair for these injuries. We have previously described a technique of repairing mid-substance muscle belly lacerations. The aim of this study was to determine the ultimate strength of an intact muscle belly and to compare the anchor suture (AS) technique with the modified Kessler (MK) technique. Methods: Fifteen fresh frozen hind-legs from adolescent pigs were divided into three groups and used for the testing. Each group consisted of five specimens. Group one was the intact control group, group two was repaired with the MK technique and group three was repaired with the AS technique. Following repair, the muscles were secured in a custom-made fixation apparatus and underwent linear tensioning at a rate of 25 mm/min, generating a load-displacement curve for each specimen. The data regarding ultimate strength, modes of failure and number of intact suture/anchor constructs (for groups 2 and 3) was calculated. Results: The ultimate strength of the intact muscle group of was found to be 608.1 ± 107.9  N. This was significantly (p < 0.05) higher than the pull-out strength of the MK and AS groups. The pull-out strength of the AS group was 143.1 ± 36.7 N, nearly twice that of the MK group 69.8 ± 16.4 N (p = 0.11). Suture pull-out was the most common mode of failure. Conclusions: The AS technique was found to have both higher strain and nearly twice the ultimate pull-out strength compared to the MK repair group. We suggest the AS technique as a viable technique for mid-substance muscle belly repairs.

Comprehensive Analysis of ADAMTS Gene Family in Renal Clear Cell Carcinoma and ADAMTS10 Research Combining Magnetic Resonance Imaging.

Clear cell renal carcinoma (ccRCC) is one of the cancers that posed a severe threat to human life on a global scale. The ADAMTS family has been proven to be involved in a number of tumor types, although it is yet unknown how they relate to ccRCC. The mRNA expression matrix and other clinically relevant information of 607 ccRCC were sourced from TCGA database. The role of ADAMTS family genes in ccRCC was determined by differential gene expression analysis and gene set enrichment analysis (GSEA). Employing stage grading, gene mutation, and survival analysis, the genes most linked to the prognosis of ccRCC were identified. The influence of genes on the pathway was determined by Kyoto Encyclopedia of Genes and Genes (KEGG) analysis. Following that, the gene's impact on ccRCC was verified by qRT-PCR, WB, MTT, Transwell detection, and a wound healing assay. Bioinformatics analysis showed that ADAMTS10 was overexpressed in cancerous tissues of people with ccRCC and its expression increased with tumor grade. Mutation analysis showed that the main cause of mutation in the ADAMTS family gene was amplification. The prognosis and survival of the ADAMTS10 elevated expression group were lower than those of the poorly expressed group, as demonstrated by a survival analysis. On the basis of the findings of MRI, we examined 60 clinical patients and collected their cancer along with the surrounding tissues. The results of qPCR detection showed that the expression of ADAMTS10 was considerably higher in cancerous regions of 60 clinical users than it was in the tissues nearby. Inhibiting ADAMTS10 development prevents cancer cells from proliferating, invading, and migrating. The KEGG analysis links ADAMTS10 to the NF-κB signal pathway. WB experiment confirmed that inhibiting ADAMTS10 expression can inhibit the activation of the NF-κB signal pathway. ADAMTS10 may be a promising prognostic marker for ccRCC that can be employed independently.

Development of a novel FE model for investigation of interactions of multi-motion segments of the lumbar spine.

The spinal anatomy is composed of a series of motion segments (MSs). Although finite element (FE) analysis has been extensively used to investigate the spinal biomechanics with various simplifications of the spinal structures, it is still a challenge to investigate the interactions of different MSs. Anatomical studies have shown that there are major spine ligaments connecting not only single-MS (i.e., two consecutive vertebrae) but also spanning multi-vertebral bones or multi-MSs. However, the effects of the multi-MS spanning ligaments on the spine biomechanics have not been investigated previously. This study developed an FE model of the lumbar spine by simulating the anterior longitudinal ligaments (ALLs) in two portions, one connecting a single-MS and the other spanning two MSs, with varying physiological cross-sectional area (PCSA) ratios of the two portions. The spine biomechanics during extension motion were investigated. The results showed that on average, the constraining forces by the two-MS spanning elements were ∼18% of those of the single-MS ALL elements when the PCSA ratio was 50%, but the two-MS ALL elements also applied compressive forces on the anterior surfaces of the vertebrae. Decreases in intradiscal pressure were also calculated when the two-MS spanning ALL elements were included in the spine model. The multi-MS spanning ligaments were shown to synergistically function with the single-MS elements in spine biomechanics, especially in the interactions of different MSs. The novel lumbar FE model could therefore provide a useful analysis tool for investigation of physiological functions of the spine.

Investigation of Characteristic Motion Patterns of the Knee Joint During a Weightbearing Flexion.

This study aimed to develop and validate a novel flexion axis concept by calculating the points on femoral condyles that could maintain constant heights during knee flexion. Twenty-two knees of 22 healthy subjects were investigated when performing a weightbearing single leg lunge. The knee positions were captured using a validated dual fluoroscopic image system. The points on sagittal planes of the femoral condyles that had minimal changes in heights from the tibial plane along the flexion path were calculated. It was found that the points do formulate a medial-lateral flexion axis that was defined as the iso-height axis (IHA). The six degrees of freedom (6DOF) kinematics data calculated using the IHA were compared with those calculated using the conventional transepicondylar axis and geometrical center axis. The IHA measured minimal changes in proximal-distal translations and varus-valgus rotations along the flexion path, indicating that the IHA may have interesting clinical implications. Therefore, identifying the IHA could provide an alternative physiological reference for improvement of contemporary knee surgeries, such as ligament reconstruction and knee replacement surgeries that are aimed to reproduce normal knee kinematics and medial/lateral soft tissue tensions during knee flexion.

Spontaneous rotational symmetry breaking in KTaO3 heterointerface superconductors.

Broken symmetries play a fundamental role in superconductivity and influence many of its properties in a profound way. Understanding these symmetry breaking states is essential to elucidate the various exotic quantum behaviors in non-trivial superconductors. Here, we report an experimental observation of spontaneous rotational symmetry breaking of superconductivity at the heterointerface of amorphous (a)-YAlO3/KTaO3(111) with a superconducting transition temperature of 1.86 K. Both the magnetoresistance and superconducting critical field in an in-plane field manifest striking twofold symmetric oscillations deep inside the superconducting state, whereas the anisotropy vanishes in the normal state, demonstrating that it is an intrinsic property of the superconducting phase. We attribute this behavior to the mixed-parity superconducting state, which is an admixture of s-wave and p-wave pairing components induced by strong spin-orbit coupling inherent to inversion symmetry breaking at the heterointerface of a-YAlO3/KTaO3. Our work suggests an unconventional nature of the underlying pairing interaction in the KTaO3 heterointerface superconductors, and brings a new broad of perspective on understanding non-trivial superconducting properties at the artificial heterointerfaces.

EM-Gaze: eye context correlation and metric learning for gaze estimation.

In recent years, deep learning techniques have been used to estimate gaze-a significant task in computer vision and human-computer interaction. Previous studies have made significant achievements in predicting 2D or 3D gazes from monocular face images. This study presents a deep neural network for 2D gaze estimation on mobile devices. It achieves state-of-the-art 2D gaze point regression error, while significantly improving gaze classification error on quadrant divisions of the display. To this end, an efficient attention-based module that correlates and fuses the left and right eye contextual features is first proposed to improve gaze point regression performance. Subsequently, through a unified perspective for gaze estimation, metric learning for gaze classification on quadrant divisions is incorporated as additional supervision. Consequently, both gaze point regression and quadrant classification performances are improved. The experiments demonstrate that the proposed method outperforms existing gaze-estimation methods on the GazeCapture and MPIIFaceGaze datasets.

Facile fabrication of polystyrene particles/graphene composites for improved dielectric and thermal properties.

In this paper, polystyrene (PS)-based reduced graphene oxide (rGO) composites were prepared by mixing PS latex particles with graphene oxide (GO) and the following in-situ reduction. The structure and morphology of PS/rGO composites were characterized, and the effects of rGO content on the dielectric properties as well as thermal stability of PS/rGO composites were investigated. Results showed that rGO sheets armoured on the surface of PS particles and exhibited well dispersion in the PS matrix after hot compression. The introduction of rGO improved the dielectric properties of the composites remarkably. When rGO content was 0.12 vol%, the dielectric permittivity and breakdown strength of PS/rGO arrived at 6.3 at102 Hz and 107 kV/mm, with 50% and 35.4% enhancement compared to the pristine PS. Furthermore, PS/rGO presented better thermal stability than the pristine PS, but the overlapping of rGO sheets in PS matrix induced the instability of dielectric loss with frequency.

Physiological Axial Tibial Rotation of the Knee During a Weightbearing Flexion.

Axial tibial rotation is a characteristic motion of the knee, but how it occurs with knee flexion is controversial. We investigated the mechanisms of tibial rotations by analyzing in vivo tibiofemoral articulations. Twenty knees of 20 living human subjects were investigated during a weightbearing flexion from full extension to maximal flexion using a dual fluoroscopic imaging system. Tibiofemoral articular contact motions on medial and lateral femoral condyles and tibial surfaces were measured at flexion intervals of 15 deg from 0 deg to 120 deg. Axial tibial rotations due to the femoral and tibial articular motions were compared. Articular contact distances were longer on femoral condyles than on tibial surfaces at all flexion intervals (p < 0.05). The articular distance on medial femoral condyle is longer than on lateral side during flexion up to 60 deg. The internal tibial rotation was 6.8 ± 4.5 deg (Mean ± SD) at the flexion interval of 0-15 deg, where 6.1 ± 2.6 deg was due to articulations on femoral condyles and 0.7 ± 5.1 deg due to articulations on tibial surfaces (p < 0.05). The axial tibial rotations due to articulations on femoral condyles are significantly larger than those on tibial surfaces until 60 deg of flexion (p < 0.05). Minimal additional axial tibial rotations were observed beyond 60 deg of flexion. The axial tibial rotations were mainly attributed to uneven articulations on medial and lateral femoral condyles. These data can provide new insights into the understanding of mechanisms of axial tibial rotations and serve as baseline knowledge for improvement of knee surgeries.

Development of immobilized beta1-adrenoceptor chromatography for rapid discovery of ligands specifically binding to the receptor from herbal extract.

The discovery of beta1-adrenoceptor (ß1-AR) ligands is viewed as an enormous demand for fighting ailments mediated by the receptor including cardiovascular diseases. Such pursuit is gravely challenged due to the lack of lead screening methods with high efficiency. This work developed a chromatographic method for pursuing ß1-AR ligand from the herbal extract by fusing epidermal growth factor receptor (EGFR) as a tag at its C-terminus to stably express the fusion receptor in E. coli, immobilizing the expressed EGFR-tagged ß1-AR onto ibrutinib-derivatized amino microspheres, and applying the immobilized receptor in the analysis of ligand-receptor interaction and herbal extract. Comprehensive characterizations like X-ray photoelectron spectroscopy and retention behaviors of canonical drugs demonstrated high specificity and good stability of the immobilized ß1-AR prepared through the covalent reaction between the EGFR and ibrutinib decorated on the microsphere surface. Frontal analysis of atenolol, metoprolol, and esmolol confirmed their bindings to ß1-AR with association constants of 1.07 × 104, 6.54 × 103, and 1.45 × 104 M-1. The thermodynamic analysis provided proof of electrostatic interaction, hydrogen bonds, and van der Waals force driving those interactions. Pulegone was recognized as a bioactive compound that specifically binding to ß1-AR from the extract of Ziziphora clinopodioides Lam by analyzing the retention peak through reverse-phase high performance liquid chromatography coupled with tandem mass spectrometry. These results, taken together, indicated that the current method is possible to provide an alternative for discovering ß1-AR ligands with high efficiency from complex matrices like herbal extract.

Cartilage contact characteristics of the knee during gait in individuals with obesity.

Obesity increases the risk of knee osteoarthritis (OA). Knee joint contact characteristics have been thought to provide insights into the pathogenesis of knee OA; however, the cartilage contact characteristics in individuals with obesity have not been fully described. We conducted cartilage-to-cartilage contact analyses through high-precision fluoroscopy imaging with subject-specific magnetic resonance cartilage models. Twenty-five individuals with obesity were recruited for this study, and previously published data consisted of eight nonobese individuals who were used as the comparator group. In both groups, knees were imaged by a dual fluoroscopic imaging system during treadmill walking, and the tibiofemoral cartilage contact locations were analyzed and described on the tibial plateau in the medial-lateral (ML) and anterior-posterior (AP) directions and on femoral condyle surfaces using contact angles in the sagittal plane and deviation angles in a plane perpendicular to the sagittal plane. On the medial tibial plateau, the ML contact locations in the individuals with obesity were located more medially than in the nonobese group throughout the stance phase. The medial plateau AP contact locations in individuals with obesity showed a different pattern compared with the nonobese group. The ML contact excursions on the medial plateau in the individuals with obesity were larger than in the nonobese group. These findings suggest that obesity affects the contact location mainly in the medial compartment, which explains, in part, the high prevalence of medial knee OA in the obese population.

Does contemporary bicruciate retaining total knee arthroplasty restore the native knee kinematics? A descriptive literature review.

BACKGROUND: There has been no consensus on the benefit of retaining the anterior cruciate ligament (ACL) in TKAs. This study aims to review recent evidences around the kinematics of bicruciate retaining (BCR) total knee arthroplasty (TKA). MATERIALS AND METHODS: A search of the literature was conducted on PubMed and Web of Science. Reports that assessed the BCR TKA kinematics, including both in vitro cadaveric studies and in vivo clinical studies, were reviewed. RESULTS: A total number of 169 entries were obtained. By exclusion criteria, five in vitro studies using cadaveric knee specimens and six in vivo studies using patient cohorts were retained. In vitro studies showed a low internal rotation (< 10°) throughout the flexion path in all BCR TKAs. Compared to native knees, the difference in the internal rotation was maximal during early and late flexion; the femur in the BCR TKA was significantly more anteriorly positioned (1.7-3.6 mm from 0° to 110°) and more externally rotated (3.6°-4.2° at 110° and 120°). In vivo studies revealed that the native knee kinematics, in general, were not fully restored after BCR TKA during various knee activates (squatting, level-walking, and downhill-walking). There are asymmetric kinematics during the stance phase of gait cycle and a smaller range of axial rotation (23% patients exhibiting external tibial rotation) throughout the gait cycle in BCR TKAs. CONCLUSIONS: Critical insights in the complex BCR TKA biomechanics have been reported from recent laboratory kinematics studies. However, whether contemporary BCR TKAs can fully restore native knee kinematics remains debatable, warranting further investigations.

Investigation of femoral condyle height changes during flexion of the knee: implication to gap balance in TKA surgery.

BACKGROUND: Gap balance of the knee at 0° and 90° of flexion has been pursued in total knee arthroplasty (TKA) with the trans-epicondyle axis (TEA) as a reference. This study investigated the height changes of the tibiofemoral articulation and compared the data with the femoral condyle height changes measured using different flexion axes. MATERIALS AND METHODS: Twenty healthy knees were investigated during an in vivo weightbearing flexion using a technique combining MRI and a dual fluoroscopic imaging system (DFIS). The tibiofemoral contact points and the femoral condyle heights [measured using: TEA, geometric center axis (GCA), and iso-height axis (IHA)] were determined at each flexion angle. The height changes of the articular contact points and the femoral condyles were compared along the flexion path. RESULTS: The changes of the medial and lateral contact point heights were within 2.5 mm along the flexion path. The changes of the medial and lateral condyle heights were within 8.9 mm for TEA, within 4.2 mm for GCA and within 3.0 mm for IHA. The height changes measured by the contact points and IHA are similar (p > 0.05), and both are significantly smaller than those measured using the TEA and GCA (p < 0.05). CONCLUSIONS: The TEA and GCA measured varying femoral condyle heights, but the IHA resulted in minimal condyle height changes and could better represent the articulation characteristics of the knee. The data suggested that the IHA could be used as an alternative reference to guide surgical preparation of gap balance along the knee flexion path during TKA surgeries.

Articulation of the femoral condyle during knee flexion.

Femoral condyle motion of the knee is generally reported using a morphological trans-epicondyle axis (TEA) or geometric center axis (GCA) in the investigation of the knee kinematics. Axial rotation of the femur is recognized as a characteristic motion of the knee during flexion, but is controversial in the literature. This study investigated the biomechanical factors that could be associated to the axial rotations of the femur using both physiological and morphological measurement methods. Twenty healthy knees were investigated during a weightbearing flexion from 0° to 120° at a 15° increment using an imaging technique. A 3D model was constructed for each knee using MR images. Tibiofemoral cartilage contact points were determined at each flexion position to represent physiological knee motion. The contact distance on each condyle was measured between consecutive contact points. The TEA and GCA were used to measure morphological anteroposterior translations of the femoral condyles. The differences between the medial and lateral condyle motions were used to calculate the physiological and morphological axial rotations of the femur. Both the physiological and morphological methods measured external rotations of the femur at low flexion range (0°-45°) and minimal rotations at higher flexion angles. However, the morphological method measured larger posterior translations of the lateral femoral condyle than the medial condyle (p < 0.05), implying a medial pivoting rotation; in contrast, the physiological method measured larger contact distances on the medial condyle than on the lateral condyle (p < 0.05), implying a lateral pivoting rotation. These data could provide useful references for future investigation of kinematics of the knee before and after surgical repair, such as using total knee arthroplasty.

3D Geometric Shape Reconstruction for Revision TKA and UKA Knees Using Gaussian Process Regression.

Revision knee surgery is complicated by distortion of previous components and removal of additional bone, potentially causing misalignment and inappropriate selection of implants. In this study, we reconstructed the native femoral and tibial surface shapes in simulated total/unicompartmental knee arthroplasty (TKA/UKA) for 20 femurs and 20 tibias using a statistical inference method based on Gaussian Process regression. Compared to the true geometry, the average absolute errors (mean absolute distances) in the prediction of resected femur bones in TKA, medial UKA, and lateral UKA were 1.0 ± 0.3 mm, 1.0 ± 0.3 mm, and 0.8 ± 0.2 mm, respectively, while those in the prediction of tibia resections in the corresponding surgeries were 1.0 ± 0.4 mm, 0.8 ± 0.2 mm, and 0.7 ± 0.2 mm, respectively. Furthermore, it was found that the prediction accuracy depends on the size and gender of the resected bone. For example, the prediction accuracy for UKA cuts was significantly better than that for TKA cuts (p < 0.05). The female and male cuts were often overfit and underfit, respectively. The data indicated that this reconstruction approach can be a viable option for planning of revision surgeries, especially when contralateral anatomy is pathological or cannot be available.