The hemostatic and anti-inflammatory effects of intravenous single-dose of tranexamic acid in double-segment posterior lumbar interbody fusion: a case control study.

This study aims to observe the hemostatic and anti-inflammatory effects of intravenous administration of tranexamic acid (TXA) in dual segment posterior lumbar interbody fusion (PLIF). The data of 53 patients with lumbar disease treated with double-segment PLIF were included in this study. The observation group was received a single-dose intravenous of TXA (1 g/100 mL) 15 min before skin incision after general anesthesia. The control group was not received TXA. The observation indicators included postoperative activated partial prothrombin time (APTT), thrombin time (PT), thrombin time (TT), fibrinogen (FIB), platelets (PLT), and postoperative deep vein thrombosis in the lower limbs, surgical time, intraoperative bleeding volume, postoperative drainage volume, transfusion rate, postoperative hospital stay, red blood cell (RBC), hemoglobin (HB), hematocrit (HCT), C-reactive protein (CRP), and erythrocyte sedimentation rate (ESR) on the 1st, 4th, 7th, and last tested day after surgery. All patients successfully completed the operation, and there was no deep vein thrombosis after operation. There was no statistically significant difference in postoperative APTT, PT, TT, FIB, PLT, surgical time, and postoperative hospital stay between the two groups (p > 0.05). The intraoperative bleeding volume, postoperative drainage volume, and transfusion rate in the observation group were lower than those in the control group, and the differences were statistically significant (p < 0.05). There was no statistically significant difference in RBC, HB, HCT, CRP, and ESR between the two groups on the 1st, 4th, 7th, and last tested day after surgery (p > 0.05). Intravenous administration of TXA in dual segment PLIF does not affect coagulation function and can reduce bleeding volume, postoperative drainage volume, and transfusion rate. Moreover, it does not affect the postoperative inflammatory response.

The effect of preoperative use of anticoagulants on the hemostatic effect of intravenous application of tranexamic acid in PLIF: a case control study.

Intravenous application of tranexamic acid (TXA) in posterior lumbar interbody fusion (PLIF) can effectively reduce blood loss without affecting coagulation function. However, it has not been reported whether preoperative use of anticoagulants may affect the efficacy of TXA in PLIF. The purpose of this study is to observe the effect of preoperative use of anticoagulants on coagulation indicators and blood loss after PLIF receiving intravenous unit dose TXA. A retrospective analysis was conducted on data from 53 patients with PLIF between 2020.11 and 2022.9, who received intravenous application of a unit dose of TXA (1 g/100 mL) 15 min before the skin incision after general anesthesia. Those who used anticoagulants within one week before surgery were recorded as the observation group, while those who did not use anticoagulants were recorded as the control group. The main observation indicators include surgical time, intraoperative blood loss, postoperative drainage volume, blood transfusion, and red blood cell (RBC), hemoglobin (HB), and hematocrit (HCT) measured on the 1st, 4th, 7th, and last-test postoperative days. Secondary observation indicators included postoperative incision healing, deep vein thrombosis of lower limbs, postoperative hospital stay, and activated partial thrombin time (APTT), prothrombin time (PT), thrombin time (TT), fibrinogen (FIB), and platelets (PLT) on the 1st and 4th days after surgery. The operation was successfully completed in both groups, the incision healed well after operation, and no lower limb deep vein thrombosis occurred. There was no significant difference in surgical time, intraoperative blood loss, postoperative drainage volume, and blood transfusion between the two groups (p > 0.05). There was no significant difference in the RBC, HB, and HCT measured on the 1st, 4th, 7th, and last-test postoperative days between the two groups (p > 0.05). There was no statistically significant difference in APTT, PT, TT, FIB and PLT between the two groups on the 1st and 4th postoperative days (p > 0.05). There was no significant difference in postoperative hospital stay between the two groups (p > 0.05). The use of anticoagulants within one week before surgery does not affect the hemostatic effect of intravenous unit dose TXA in PLIF.

Case report: Shock after percutaneous vertebroplasty of the 5th thoracic vertebra.

Background: Percutaneous vertebroplasty (PVP) is a common treatment for osteoporotic vertebral compression fracture (OVCF). Perioperative bleeding is usually rare, so there are few reports of shock. However, we developed shock after treating a case of OVCF of the 5th thoracic vertebra with PVP. Case presentation: An 80 years old female patient received PVP due to OVCF of the 5th thoracic vertebra. The operation was successfully completed and the patient returned to the ward safely after the operation. At 90 min after operation, she developed shock, which was induced by subcutaneous hemorrhage up to 1500 ml at the puncture site. Before using vascular embolization, transfusion and blood transfusion were used to maintain blood pressure, and local ice bag compression was used to reduce swelling and stop bleeding, which achieved successful hemostasis. She recovered and discharged after 15 days, with the hematoma having absorbed. There was no recurrence during the 17-month follow-up. Conclusion: Although PVP is considered to be a safe and effective method to treat OVCF, the possible hemorrhagic shock still needs to arouse the vigilance of surgeons.

Strain-Regulated Pt-NiO@Ni Sub-Micron Particles Achieving Bifunctional Electrocatalysis for Zinc-Air Battery.

Highly active bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) have always been the key factors to affect the performance of zinc-air batteries. However, integrating the independent reaction sites of ORR and OER in a catalyst remains a major challenge. Herein, a collaborative strategy based on defect induction and doping is proposed to prepare the strain-regulated Pt-NiO@Ni sub-micron particles (Pt-NiO@Ni SP). Benefiting from the synergistic effect of tensile strain and Pt-doped, the metallic Ni-based sub-micron particles with tensile strain as the catalyst carriers can effectively optimize the electronic distribution of atomic structures in Pt and NiO on the surface of particles, leading to reduce the energy barrier of intermediates for ORR and OER. Consequently, the Pt-NiO@Ni SP exhibits outstanding bifunctional catalytic activity with the ΔE index of 0.65 V under a low Pt loading, outperforming that of the benchmark Pt/C+IrO2 catalysts (0.76 V). Impressively, the Pt-NiO@Ni SP-based liquid zinc-air battery develops a high open-circuit potential (1.47 V), excellent energy density (188.2 mW cm-2 ), and favorable cyclic charge-discharge cycling durability (200 h at 20 mA cm-2 ). This work provides an innovative avenue for the rational construction of highly active bifunctional electrocatalysts for practical applications.

The effect of intravenous unit-dose tranexamic acid on visible and hidden blood loss in posterior lumbar interbody fusion: a randomized clinical trial.

There are few reports of intravenous unit-dose tranexamic acid (TXA) on the relationship between visible blood loss (VBL) and hidden blood loss (HBL) in posterior lumbar interbody fusion (PLIF). Therefore, the objective of this randomized, prospective, double-blind, single center study was to investigate the effect of intravenous unit-dose TXA on VBL and HBL in patients who underwent PLIF. Among 100 patients, 11 were excluded due to failue to comply with the study, 1 was excluded due to non-conpliance with the study, and 88 were eligible for inclusion in the study. 46 patients who treated with PLIF received unit-dose of TXA (1 g/100 mL) intravenously 15 min before skin incision after general anesthesia (observation group) and 42 patients were given 100 mL of normal saline (control group). The operation time, intraoperative blood loss, postoperative drainage, VBL, HBL, blood transfusion rate, and adverse events were recorded in the two groups. Besides, activated partial prothrombin time (APTT), prothrombin time (PT), thrombin time (TT), fibrinogen (FIB), platelets (PLT), red blood cells (RBC), hemoglobin (HB), hematocrit (HCT), C-reactive protein (CRP), erythrocyte sedimentation rate (ESR) on the 1st postoperative day; and RBC, HB, HCT, CRP, ESR on the 4th postoperative day were recorded. All 88 patients successfully completed the operation, the incision healed well, and there was no deep vein thrombosis of the lower extremity after operation. The intraoperative blood loss, postoperative drainage, VBL, HBL, and blood transfusion rate in the observation group were lower than those in the control group, and the differences were statistically significant (p < 0.05). There was no significant difference in operation time between the two groups (p > 0.05). There was no significant difference in postoperative APTT, PT, TT, FIB, PLT, RBC, HB, HCT, CRP and ESR between the two groups (p > 0.05). Intravenous unit-dose TXA is safe and feasible in PLIF, and it can effectively reduce perioperative VBL and HBL.

Case report: Cholesterol granuloma of femur.

Background: Cholesterol granuloma (CG) is a particular type of granulation tissue reaction. It is a very rare benign lesion characterized by swelling growth due to a large number of cholesterol crystals and foreign body giant cells. There has been no report of a CG of the femur. Case presentation: A 74-year-old woman suffered from pain and discomfort in the upper right knee for 10 years, which became aggravated for 10 days. She was diagnosed with CG of the right femur at our hospital and was treated with surgery. During the operation, a large amount of yellow-brown, oily, crystal structures was found. Postoperative pathology investigations confirmed the lesion as a CG. Postoperative follow-up was carried out for 15 months that confirmed the effect of treatment was satisfactory. Conclusions: CG of the femur is an extremely rare benign lesion. Surgical treatment can provide effective treatment results.

Case report: Type I diastematomyelia with breast abnormalities and clubfoot.

Background: Diastematomyelia is a rare congenital spinal cord malformation, classified as type I or type II, with over half of the cases considered type I. However, type I diastematomyelia with breast abnormality and clubfoot is extremely rare in clinical practice. Case presentation: We admitted an 18-year-old female patient with type I diastematomyelia with breast abnormalities and clubfoot. She was underwent surgical treatment. After the surgical removal of the pressure-causing bone spur, the weakness of the right lower limb was significantly relieved. During the 22-month follow-up, there was no complication and no recurrence. Conclusion: Surgical removal of the pressure-causing bone spur can relieve symptoms in the lower limbs. However, further research is warranted to explore the breast abnormalities in patients with diastematomyelia.

Traditional Chinese medicine manipulative reduction combined with percutaneous vertebroplasty for treating type III Kummell's disease: A case report.

BACKGROUND: A patient with type III Kummell's disease had a ruptured posterior cortex of the fractured vertebral body, which caused spinal cord compression. An open surgery was considered the best choice of operation. However, the patient and her family refused open surgery and instead demanded a minimally invasive surgical treatment such as percutaneous vertebroplasty (PVP). After preoperative discussion, we finally adopted the novel therapy of traditional Chinese medicine manipulative reduction (TCMMR) combined with PVP. CASE SUMMARY: A patient with type III Kummell's disease exhibiting bone block-induced spinal cord compression was admitted to our hospital. She suffered from a variety of medical disorders but refused open surgery, and instead asked for PVP surgery. TCMMR, in parallel with PVP, was used to restore the height of the compressed vertebral body and reduce the symptoms of spinal cord compression by the bone block in order to strengthen the vertebral body and prevent further collapse. The surgery was very successful. The height of the compressed vertebra was restored, and the symptom of spinal cord compression by bone block was reduced successfully via TCMMR. The fractured vertebra was solidified by the PVP. The pain visual analog score declined from preoperative 7 scores to postoperative 2 scores, and the Frankel spinal cord scale increased from preoperative D degree to postoperative E degree. CONCLUSION: The new method has advantages in treating patients with type III Kummell's disease who cannot be treated with open surgery.

Delayed arterial symptomatic epidural hematoma on the 14th day after posterior lumbar interbody fusion: A case report.

BACKGROUND: Delayed arterial symptomatic epidural hematoma (SEH) on the 14th day after posterior lumbar interbody fusion (PLIF) is rare but it may lead to severe complications if not identified and treated in a timely manner. After diagnosis of the current case, early surgical removal of the hematoma and strict hemostasis treatment was accomplished. This case report highlights the importance of swift diagnosis and treatment in SEH patients. CASE SUMMARY: A 41-year-old male patient with a single-segment lumbar disc herniation underwent left-side PLIF. On the 14th post-operative day, the patient complained of lumbar incision pain with sudden onset accompanied by left limb radiation pain and aggravated cauda equina symptoms. Magnetic resonance imaging examination and a puncture blood draw at the incision site confirmed a delayed arterial SEH. Emergency surgical removal of the hematoma and hemostasis was performed. About 70 mL of hematoma was found in the left incision. Continuous bleeding was found in the anterior branch of the transverse process of the 4th lumbar artery in the muscle area about 2 cm below the transverse process of the 4th lumbar vertebra. A blood jet of about 10 cm in height was observed and bipolar electrocoagulation was used to stop the bleeding. Post-operative lumbar incision pain and left lower limb pain were relieved immediately and gradually disappeared. There was no recurrence during the 12-mo follow-up. CONCLUSION: For delayed arterial SEH on the 14th day after PLIF, preventive measures including pre-, intra- and post-operative prevention should be implemented.

Case Report: Microscope-assisted surgery of C7 nerve root cyst with neurological symptoms.

Background: Cervical nerve root cysts are rare and easily missed or misdiagnosed in clinical practice. Although conventional surgery is effective for cervical nerve root cysts, it is limited by the small surgical field of view and operating range, relatively difficult procedure, and incomplete cyst resection. Microscope-assisted magnification of the surgical field of vision reduces the difficulty and ensures complete cyst resection. Case presentation: A 58-year-old male patient was diagnosed with a cervical nerve root sleeve cyst on the right C7 vertebra with neurological symptoms. Microscope-assisted surgery was used as treatment. The cyst was completely removed by the microscope-assisted surgery, with satisfactory patient recovery. The surgery did not produce complications, such as spinal cord neurovascular injury, and the patient's symptoms disappeared quickly after surgery. During the 2-year follow-up, there was no complication and no recurrence. Conclusion: Microscope-assisted surgery in treatment of the C7 nerve root cyst could achieve a complete resection.

Endoscopy-aided retrieval of broken drainage tube after lumbar spine surgery.

BACKGROUND: A ruptured drainage tube which remains in the incision is a rare surgical complication. The usual mode of retrieval is to detach the suture and explore the pre-existing incisional wound. However, spinal endoscopy provides an alternative method for successful removal, avoiding the enlargement of the surgical wound. CASE REPORT: A 53-year-old male patient underwent open lumbar spine surgery for lumbar spondylolisthesis between the 5th lumbar and 1st sacral vertebral bodies. Prior to closure, two negative pressure ball drainage tubes were inserted, one of which broke during removal,beneath the fascia. Use of spinal endoscopy enabled the complete removal of the broken drainage tube. Both the original incisional and endoscopic wounds healed well without any sign of infection. CONCLUSIONS: The use of spinal endoscopy to remove the broken drainage tube is an alternative to open the surgical wound and should be took into account.

Feature Analysis and Extraction for Specific Emitter Identification Based on the Signal Generation Mechanisms of Radar Transmitters.

In this study, a feature analysis and extraction method was proposed for specific emitter identification based on the signal generation mechanisms of radar transmitters. The generation of radar signals by radar transmitters was analyzed theoretically and experimentally. In the analysis, the main source of unintentional modulation in radar signals was identified, and the frequency stabilization of the solid-state frequency source, the nonlinear characteristics of the radio frequency amplifier chain, and the envelope of the pulse front edge were extracted as features for specific emitter identification. Subsequently, these characteristics were verified through simulation. The results revealed that the features extracted by this method exhibit "fingerprint characteristics" and can be used to identify specific radar emitters.

Directly Printed Embedded Metal Mesh for Flexible Transparent Electrode via Liquid Substrate Electric-Field-Driven Jet.

Flexible transparent electrodes (FTEs) with embedded metal meshes play an indispensable role in many optoelectronic devices due to their excellent mechanical stability and environmental adaptability. However, low-cost, simple, efficient, and environmental friendly integrated manufacturing of high-performance embedded metal meshes remains a huge challenge. Here, a facile and novel fabrication method is proposed for FTEs with an embedded metal mesh via liquid substrateelectric-field-driven microscale 3D printing process. This direct printing strategy avoids tedious processes and offers low-cost and high-volume production, enabling the fabrication of high-resolution, high-aspect ratio embedded metal meshes without sacrificing transparency. The final manufactured FTEs with 80 mm × 80 mm embedded metal mesh offers excellent optoelectronic performance with a sheet resistance (Rs ) of 6 Ω sq-1 and a transmittance (T) of 85.79%. The embedded metal structure still has excellent mechanical stability and good environmental suitability under different harsh working conditions. The practical feasibility of the FTEs is successfully demonstrated with a thermally driven 4D printing structure and a resistive transparent strain sensor. This method can be used to manufacture large areas with facile, high-efficiency, low-cost, and high-performance FTEs.

3D Printed High Performance Silver Mesh for Transparent Glass Heaters through Liquid Sacrificial Substrate Electric-Field-Driven Jet.

Transparent glass with metal mesh is considered a promising strategy for high performance transparent glass heaters (TGHs). However, the realization of simple, low-cost manufacture of high performance TGHs still faces great challenges. Here, a technique for the fabrication of high performance TGHs is proposed using liquid sacrificial substrate electric-field-driven (LS-EFD) microscale 3D printing of thick film silver paste. The liquid sacrificial substrate not only significantly improves the aspect ratio (AR) of silver mesh, but also plays a positive role in printing stability. The fabricated TGHs with a line width of 35 µm, thickness of 12.3 µm, and pitch of 1000 µm exhibit a desirable optoelectronic performance with sheet resistance (Rs ) of 0.195 Ω sq-1 and transmittance (T) of 88.97%. A successful deicing test showcases the feasibility and practicality of the manufactured TGHs. Moreover, an interface evaporator is developed for the coordination of photothermal and electrothermal systems based on the high performance TGHs. The vapor generation rate of the device reaches 10.69 kg m-2 h-1 with a voltage of 2 V. The proposed technique is a promising strategy for the cost-effective and simple fabrication of high performance TGHs.

RBC, HB, HCT, CRP, and ESR at different postoperative periods after the application of intravenous unit dose transient acid in PLIF: A case control study.

Background: Tranexamic acid (TXA) has been used in posterior lumbar interbody fusion (PLIF) and reduces blood loss. However, it has not been reported whether it will continue to affect postoperative red blood cells (RBC), hemoglobin (HB), hematocrit (HCT), C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR). The purpose of this study was to observed the above indicators at different time after PLIF with unit dose intravenous (iv) TXA. Methods: The data of 44 patients treated by single-segment PLIF from 2020.11 to 2022.3 were retrospectively analyzed. Observation group was given a unit dose of ivTXA (1 g/100 mL) 15 min before skin incision after general anesthesia. Patients without TXA were recorded as control group. Main observation indicators include RBC, HB, HCT, CRP and ESR on the 1st, 4th, 7th and last tested day after surgery. Secondary observation indicators include postoperative activated partial thrombin time (APTT), prothrombin time (PT), thrombin time (TT), and fibrinogen (FIB); and operation time, intraoperative blood loss, postoperative drainage volume, incision healing, postoperative deep vein thrombosis and postoperative hospital stay. Results: The operation was successfully completed without related complications. At term of main observation indicators, RBC, HB and HCT remained relatively stable, while CRP and ESR fluctuated to some extent after PLIF. The RBC, HB and HCT in the observation group were higher than those in the control group with statistically significant (p < 0.05). Except the CRP of 7th postoperative day of the observation group was significantly lower than that of the control group (p < 0.05), there was no difference in other CRP and ESR between the two groups (p > 0.05). At term of secondary observation indicators, the intraoperative blood loss and postoperative drainage volume of the observation group were lower than those of the control group with statistically significant (p < 0.05). There was no significant difference in postoperative APTT, PT, TT, FIB, and operation time and postoperative hospital stay between the two groups (p > 0.05). Conclusion: The application of unit dose of ivTXA in PLIF can safely and effectively reduce blood loss. Meanwhile, it can also maintain higher RBC, HB, HCT levels without disturbing CRP and ESR levels after surgery.

Templateless, Plating-Free Fabrication of Flexible Transparent Electrodes with Embedded Silver Mesh by Electric-Field-Driven Microscale 3D Printing and Hybrid Hot Embossing.

Flexible transparent electrodes (FTEs) with an embedded metal mesh are considered a promising alternative to traditional indium tin oxide (ITO) due to their excellent photoelectric performance, surface roughness, and mechanical and environmental stability. However, great challenges remain for achieving simple, cost-effective, and environmentally friendly manufacturing of high-performance FTEs with embedded metal mesh. Herein, a maskless, templateless, and plating-free fabrication technique is proposed for FTEs with embedded silver mesh by combining an electric-field-driven (EFD) microscale 3D printing technique and a newly developed hybrid hot-embossing process. The final fabricated FTE exhibits superior optoelectronic properties with a transmittance of 85.79%, a sheet resistance of 0.75 Ω sq-1 , a smooth surface of silver mesh (Ra  ≈ 18.8 nm) without any polishing treatment, and remarkable mechanical stability and environmental adaptability with a negligible increase in sheet resistance under diverse cyclic tests and harsh working conditions (1000 bending cycles, 80 adhesion tests, 120 scratch tests, 100 min ultrasonic test, and 72 h chemical attack). The practical viability of this FTE is successfully demonstrated with a flexible transparent heater applied to deicing. The technique proposed offers a promising fabrication strategy with a cost-effective and environmentally friendly process for high-performance FTE.

Fractal-Based Stretchable Circuits via Electric-Field-Driven Microscale 3D Printing for Localized Heating of Shape Memory Polymers in 4D Printing.

Thermally responsive shape memory polymers (SMPs) used in 4D printing are often reported to be activated by external heat sources or embedded stiff heaters. However, such heating strategies impede the practical application of 4D printing due to the lack of precise control over heating or the limited ability to accommodate the stretching during shape programming. Herein, we propose a novel 4D printing paradigm by fabricating stretchable heating circuits with fractal motifs via electric-field-driven microscale 3D printing of conductive paste for seamless integration into 3D printed structures with SMP components. By regulating the fractal order and printing/processing parameters, the overall electrical resistance and areal coverage of the circuits can be tuned to produce an efficient and uniform heating performance. Compared with serpentine structures, the resistance of fractal-based circuits remains relatively stable under both uniaxial and biaxial stretching. In practice, steady-state and transient heating modes can be respectively used during the shape programming and actuation phases. We demonstrate that this approach is suitable for 4D printed structures with shape programming by either uniaxial or biaxial stretching. Notably, the biaxial stretchability of fractal-based heating circuits enables the shape change between a planar structure and a 3D one with double curvature. The proposed strategy would offer more freedom in designing 4D printed structures and enable the manipulation of the latter in a controlled and selective manner.

Cost-Effective Fabrication of Transparent Strain Sensors via Micro-Scale 3D Printing and Imprinting.

The development of strain sensors with high sensitivity and stretchability is essential for health monitoring, electronic skin, wearable devices, and human-computer interactions. However, sensors that combine high sensitivity and ultra-wide detection generally require complex preparation processes. Here, a novel flexible strain sensor with high sensitivity and transparency was proposed by filling a multiwalled carbon nanotube (MWCNT) solution into polydimethylsiloxane (PDMS) channel films fabricated via an electric field-driven (EFD) 3D printing and molding hybrid process. The fabricated flexible strain sensor with embedded MWCNT networks had superior gauge factors of 90, 285, and 1500 at strains of 6.6%, 14%, and 20%, respectively. In addition, the flexible strain sensors with an optical transparency of 84% offered good stability and durability with no significant change in resistance after 8000 stretch-release cycles. Finally, the fabricated flexible strain sensors with embedded MWCNT networks showed good practical performance and could be attached to the skin to monitor various human movements such as wrist flexion, finger flexion, neck flexion, blinking activity, food swallowing, and facial expression recognition. These are good application strategies for wearable devices and health monitoring.

Preparation of Nano Silver Paste and Applications in Transparent Electrodes via Electric-Field Driven Micro-Scale 3D Printing.

Nano-silver paste, as an important basic material for manufacturing thick film components, ultra-fine circuits, and transparent conductive films, has been widely used in various fields of electronics. Here, aiming at the shortcomings of the existing nano-silver paste in printing technology and the problem that the existing printing technology cannot achieve the printing of high viscosity, high solid content nano-silver paste, a nano-silver paste suitable for electric-field-driven (EFD) micro-scale 3D printing is developed. The result shows that there is no oxidation and settlement agglomeration of nano-silver paste with a storage time of over six months, which indicates that it has good dispersibility. We focus on the printing process parameters, sintering process, and electrical conductivity of nano-silver paste. The properties of the nano-silver paste were analyzed and the feasibility and practicability of the prepared nano-silver paste in EFD micro-scale 3D printing technology were verified. The experiment results indicate that the printed silver mesh which can act as transparent electrodes shows high conductivity (1.48 Ω/sq) and excellent transmittance (82.88%). The practical viability of the prepared nano-silver paste is successfully demonstrated with a deicing test. Additionally, the experimental results show that the prepared silver mesh has excellent heating properties, which can be used as transparent heaters.

Fabrication of High-Performance Silver Mesh for Transparent Glass Heaters via Electric-Field-Driven Microscale 3D Printing and UV-Assisted Microtransfer.

Great challenges remain concerning the cost-effective manufacture of high-performance metal meshes for transparent glass heaters (TGHs). Here, a high-performance silver mesh fabrication technique is proposed for TGHs using electric-field-driven microscale 3D printing and a UV-assisted microtransfer process. The results show a more optimal trade-off in sheet resistance (Rs = 0.21 Ω sq-1 ) and transmittance (T = 93.9%) than for indium tin oxide (ITO) and ITO substitutes. The fabricated representative TGH also exhibits homogeneous and stable heating performance, remarkable environmental adaptability (constant Rs for 90 days), superior mechanical robustness (Rs increase of only 0.04 in harsh conditions-sonication at 100 °C), and strong adhesion force with a negligible increase in Rs (2-12%) after 100 peeling tests. The practical viability of this TGH is successfully demonstrated with a deicing test (ice cube: 21 cm3 , melting time: 78 s, voltage and glass thickness: 4 V, 5 mm). All of these advantages of the TGHs are attributed to the successful fabrication of silver meshes with high resolution and high aspect ratio on the glass substrate using the thick film silver paste. The proposed technique is a promising new tool for the inexpensive fabrication of high-performance TGHs.