Probing the Size Effect of Graphene Oxide Nanosheets on Ice Crystal Regulation and Laser-Assisted Rapid Rewarming.

Two-dimensional (2D) nanomaterials have attracted many researchers to explore the effect of ice control and rapid deicing due to their functional groups, large specific surface area, and excellent photothermal properties. However, the impact of size effects on ice crystal formation, growth, and photothermal performance has been rarely explored. Here, graphene oxide nanosheets (GO NSs) with controllable sizes were used as a representative of 2D nanomaterials to probe the effect of size on ice crystal regulation and rapid rewarming in cell cryopreservation. All sizes of GO NSs exhibited notable inhibitory effects on ice crystal size during the recrystallization process. Significantly, when the size of GO NSs was smaller than a certain size (<150 nm), they showed a more significant ice recrystallization suppression effects, which could reduce the ice crystal size to about 17% of that of pure water. Meanwhile, the photothermal experiments also indicated that smaller-sized GO NSs exhibited better photothermal behavior, with 90 nm GO NSs (GO-90) heating to 70 °C in just 1 min induced by an 808 nm laser (2 W/cm2). Furthermore, applying GO-90 (200 µg/mL) to cell cryopreservation, cell viability could reach 95.2% and 93% with a low amount of traditional cryoprotectant (2% v/v DMSO) for A549 cells and HeLa cells after recovery, respectively. With the assistance of a 808 nm laser, the rewarming time was also shortened to 20 s, greatly improving the rewarming rate. Our work associated specific sizes of 2D nanomaterials with their ice growth inhibition behaviors during recrystallization and photothermal properties to synergistically improve cell cryopreservation efficiency, providing guidance for effectively designing novel 2D nanomaterials for collaborative control of ice crystals in cell cryopreservation.

A microcosm study on persulfate oxidation combined with enhanced bioremediation to remove dissolved BTEX in gasoline-contaminated groundwater.

The combination of persulfate (PS) oxidation with enhanced bioremediation (EBR) is a potential trend in remediating organic-contaminated groundwater. However, the impacts of PS on EBR presented in the transition zone between PS oxidation zone and EBR zone need further study. To better characterize the impacts and provide available indicators, PS oxidation and EBR with nitrate amended were performed through the microcosm experiments to remove dissolved benzene, toluene, ethylbenzene and xylene (denoted as BTEX) in gasoline-saturated groundwater. The results indicated that PS oxidation combined with EBR almost completely removed BTEX with the ratio of > 93% over the experiments, which is better than PS oxidation (54-97%) but still worse than EBR (100%). The removal velocities of BTEX in EBR, PS oxidation, and PS oxidation combined with EBR were 0.94, 0.1-0.16, and 0.1-0.54 mg/L/d, respectively. High concentration of PS, along with high-strength activation, made the pH decrease to 3.3-4.4 and the Eh increase to 141-203 mV, thus greatly inhibited microbial activities as well. In such circumstances, oxygen and nitrate could not be significantly used as electron acceptors by microbials. To reduce the impacts of PS oxidation on EBR, the PS/BTEX molar ratio of < 6 and the PS/Fe2+ molar ratio of > 1 may be appropriate in transition zone. The hydro-chemical indicators, including pH, Eh, and availability of electron acceptors such as oxygen and nitrate, could reflect the impacts of PS oxidation on bioprocesses. During in-situ chemical oxidation (ISCO), PS injection and PS activation by Fe2+ should be managed for decreasing the impacts on EBR, based on the PS/BTEX and PS/Fe2+ molar ratios.

Migration of BTEX and Biodegradation in Shallow Underground Water through Fuel Leak Simulation.

To provide more reasonable references for remedying underground water, fuel leak was simulated by establishing an experimental model of a porous-aquifer sand tank with the same size as that of the actual tank and by monitoring the underground water. In the tank, traditional gasoline and ethyl alcohol gasoline were poured. This study was conducted to achieve better understanding of the migration and distribution of benzene, toluene, ethyl benzene, and xylene (BTEX), which are major pollutants in the underground water. Experimental results showed that, compared with conventional gasoline, the content peak of BTEX in the mixture of ethyl alcohol gasoline appeared later; BTEX migrated along the water flow direction horizontally and presented different pollution halos; BTEX also exhibited the highest content level at 45 cm depth; however, its content declined at the 30 and 15 cm depths vertically because of the vertical dispersion effect; the rise of underground water level increased the BTEX content, and the attenuation of BTEX content in underground water was related to the biodegradation in the sand tank, which mainly included biodegradation with oxygen, nitrate, and sulfate.