Electrochemical determination of 6-mercaptopurine at silver microdisk electrodes.

The electrochemical behaviour of 6-mercaptopurine (6-MP) at a microdisk electrode is investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results indicate that 6-MP can be strongly adsorbed on the surface of the static mercury drop electrode (SMDE) and reacts with Ag+ ions which are produced at positive potentials. 6-MP yields a well-defined cathodic stripping signal during the negative scan at about -0.812 V (vs. SCE) in pH 9.0 phosphate buffer solution. The electrode has hence been used for the determination of 6-MP by differential pulse voltammetry (DPV). The linear range is between 2.0x10(-7) and 5.0x10(-5) mol/l, with the calculated detection limit (S/N=3) of 8.0x10(-8) mol/l. The relative standard deviation is 3.0% for eight successive determinations of 4.0x10(-5) mol/l 6-MP. The determination of 6-MP in tablets has also been carried out and satisfactory results have been obtained.

Electrocatalytical oxidation of hydroquinone with ferrocene covalently bound to L-cysteine self-assembled monolayers on a gold electrode.

The preparation of a gold electrode modified by ferrocenecarboxylic acid (FcA) covalently bound to L-cysteine self-assembled monolayer (FcA-SAM) is described. The modified electrode shows an excellent electrocatalytic activity for the oxidation of hydroquinone (QH2) and accelerates the electron transfer rate. The anodic overpotential is reduced by ca. 290 mV compared to those obtained at bare gold electrodes. The charge transfer coefficient and the apparent surface electron transfer rate constant for the redox couple of Q/QH2 at the modified electrode are found to be 0.425 and 0.96 s(-1), respectively. The catalytic current response of DPV increases linearly with the QH2 concentration from 5.7 x 10(-7) to 3.2 x 10(-4) M. The estimation of QH2 in a simulative sample is satisfactory. The method is simple, quick, and sensitive.

Preparation of novel mercury-doped silver nanoparticles film glassy carbon electrode and its application for electrochemical biosensor.

A novel mercury-doped silver nanoparticles film glassy carbon (Ag/MFGC) electrode was prepared in this study. Electrochemical behaviors of cysteine on the Ag/MFGC electrode were investigated by electrochemical impedance spectroscopy and cyclic voltammetry (CV). The results indicated that cysteine could be strongly adsorbed on the surface of the Ag/MFGC electrode to form a thin layer. The doped electrode could catalyze the electrode reaction process of cysteine, and the cysteine displayed a pair of well-defined and nearly reversible CV peaks at the electrode in an acetate buffer solution (pH 5.0). The Ag/MFGC electrode was used for determination of cysteine by differential pulse voltammetry. The linear range was between 4.0x10(-7) and 1.3x10(-5) mol/L, with a detection limit of 1.0x10(-7) mol/L and a signal-to-noise ratio of 3. The relative standard deviation was 2.4% for seven successive determinations of 1.0x10(-5) mol/L cysteine. The determinations of cysteine in synthetic samples and urinal samples were carried out and satisfactory results were obtained. Amperometric application of the Ag/MFGC electrode as biosensors is proposed.