Evaluation of the Anti-Inflammatory Pain Effect of Ginsenoside-Conjugated O-Carboxymethyl Chitosan Particles.

Nanoparticle delivery of functional molecules or vaccines is an effective method for the treatment of many diseases. This study aims to design ginsenoside Rh2-conjugated O-carboxymethyl chitosan (O-CMC/Rh2) as a drug delivery system and explore its anti-nociceptive effects. O-CMC/Rh2 was synthesized with an esterification reaction, and its chemical composition and morphology were evaluated using proton nuclear magnetic resonance (1H NMR), the attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and scanning electron microscopy (SEM). In addition, the in vitro cumulative release of Rh2 from the O-CMC/Rh2 was also evaluated under different pH conditions. The results showed that the ginsenoside Rh2 was successfully conjugated to the O-CMC matrix and exhibited a highly porous structure after conjugation, facilitating the release of Rh2 from O-CMC. Complete Freund's adjuvant (CFA) and burn injury-induced pain models were used to evaluate the anti-nociceptive effects of O-CMC/Rh2 on inflammatory pain. O-CMC/Rh2 reduced CFA-induced pain hypersensitivity in a dose-dependent manner and had a longer analgesic effect than Rh2. In addition, O-CMC/Rh2 also relieved the chronic pain induced by bury injury. These results indicated that O-CMC/Rh2 could be useful in reducing inflammatory pain, thus possessing a potential medicinal application in pain therapy.

Rapid Impregnating Resins for Fiber-Reinforced Composites Used in the Automobile Industry.

As environmental regulations become stricter, weight- and cost-effective fiber-reinforced polymer composites are being considered as alternative materials in the automobile industry. Rapidly impregnating resin into the reinforcing fibers is critical during liquid composite molding, and the optimization of resin impregnation is related to the cycle time and quality of the products. In this review, various resins capable of rapid impregnation, including thermoset and thermoplastic resins, are discussed for manufacturing fiber-reinforced composites used in the automobile industry, along with their advantages and disadvantages. Finally, vital factors and perspectives for developing rapidly impregnated resin-based fiber-reinforced composites for automobile applications are discussed.

Chitosan and TiO2 functionalized polypropylene nonwoven fabrics with visible light induced photocatalytic antibacterial performances.

Chitosan/TiO2 functionalized polypropylene (CS/TiO2/PP) nonwoven fabrics were fabricated through crosslinking of chitosan with glutaraldehyde followed by loading of TiO2 nanoparticles. The functionalized CS/TiO2/PP has super hydrophilicity and excellent visible light induced photocatalytic antibacterial properties owing to the synergistic effects of CS and TiO2. The photocatalytic degradation performance was determined by assessing the degradation of methyl blue under simulated visible light irradiation and its recyclability was also evaluated. In addition, SEM images demonstrated that TiO2 nanoparticles were distributed evenly on the surface of the 2 g/L CS/TiO2/PP. Meanwhile, the polypropylene surface showed a significant increase in hydrophilicity after being treated with chitosan and TiO2. The photocatalytic degradation results revealed that CS/TiO2/PP had higher photocatalytic properties than those of pure PP under visible light, and the degradation rate of methylene blue reached 96.4 % after 90 min of light exposure. Compared to pure PP, the antibacterial properties of CS/TiO2/PP significantly increased, and the bacterial reduction percentages were increased to 98.7 % and 96.3 %, against E. coli and S. aureus, respectively. The functionalized CS/TiO2/PP composites exhibited promising potential in environmentally friendly antibacterial materials.

Challenges and advances in materials and fabrication technologies of small-diameter vascular grafts.

The arterial occlusive disease is one of the leading causes of cardiovascular diseases, often requiring revascularization. Lack of suitable small-diameter vascular grafts (SDVGs), infection, thrombosis, and intimal hyperplasia associated with synthetic vascular grafts lead to a low success rate of SDVGs (< 6 mm) transplantation in the clinical treatment of cardiovascular diseases. The development of fabrication technology along with vascular tissue engineering and regenerative medicine technology allows biological tissue-engineered vascular grafts to become living grafts, which can integrate, remodel, and repair the host vessels as well as respond to the surrounding mechanical and biochemical stimuli. Hence, they potentially alleviate the shortage of existing vascular grafts. This paper evaluates the current advanced fabrication technologies for SDVGs, including electrospinning, molding, 3D printing, decellularization, and so on. Various characteristics of synthetic polymers and surface modification methods are also introduced. In addition, it also provides interdisciplinary insights into the future of small-diameter prostheses and discusses vital factors and perspectives for developing such prostheses in clinical applications. We propose that the performance of SDVGs can be improved by integrating various technologies in the near future.

Prevalence and clinical characteristics of methicillin-resistant Staphylococcus aureus infections among dermatology inpatients: A 7-year retrospective study at a tertiary care center in southwest China.

Background: Increased rates of methicillin-resistant Staphylococcus aureus (MRSA) antibiotic resistance and the associated morbidity have increased dermatologists' attention to skin and soft tissue MRSA infections. However, the clinical characterization of MRSA skin and soft tissue infections (SSTIs) in Southwest China is lacking, which precludes optimal prevention and treatment of these infections. Objectives: This study was conducted to characterize the prevalence, clinical comorbidities and antibiotic susceptibility of MRSA isolates from SSTIs, including community-associated (CA) and healthcare-associated (HA) isolates. Methods: In the Dermatology Inpatient Department of the First Affiliated Hospital of Guangxi Medical University, a retrospective study was conducted on data, including patient demographics and clinical information, from culture-confirmed S. aureus isolated from skin and soft tissue between January 1, 2015, and December 31, 2021. Isolate susceptibility to 13 antibiotics was determined using the Vitek 2 system. Results: From among 864 S. aureus strains, we identified 283 MRSA (32.75%) isolates comprising 203 CA-MRSA and 80 HA-MRSA isolates. The average rate of CA-MRSA isolation for MRSA SSTIs was 71.73%. The HA-MRSA isolation rate for MRSA SSTIs increased significantly. HA-MRSA-infected patients were older. The most common dermatological presentation of CA-MRSA infection was staphylococcal scalded skin syndrome, while the comorbidity severe drug eruption was significantly associated with HA-MRSA infection. One CA-MRSA strain was resistant to linezolid, and one HA-MRSA strain had an intermediate phenotype for vancomycin; both strains had low sensitivity to clindamycin and erythromycin (3.70%~19.40%). However, HA-MRSA isolates were more susceptible to trimethoprim/sulfamethoxazole. Conclusions: CA-MRSA is a predominant pathogen causing SSTIs, and HA-MRSA infection incidence is increasing gradually. Both strains showed increasing antibiotic resistance. Our data on MRSA susceptibility may guide dermatologist antibiotic treatment decisions. Dermatologists should consider these identified comorbidities of MRSA SSTIs when patients are admitted and initiate early prevention and treatment of MRSA.

Effect of gelatin treatment on tow deformation in resin-impregnated glass fiber.

The potential use of gelatin materials in the liquid composite molding manufacturing (LCM) process was investigated, with specific focus on the reinforcement deformation phenomenon. The adoptability of gelatin as a binder in a composite material with glass fiber for application in the LCM process was evaluated by analyzing the permeability and microscopic structure of the gelatin-coated glass fiber. To assess the tow deformation, the permeability of the non-crimped unidirectional glass fiber mat was evaluated at different flow rates that could be applied in the LCM process. Hysteresis of the permeability was observed as the flow rate increased and decreased, indicative of tow deformation. The permeability of the gelatin-treated glass fiber mat exhibited a relatively smaller variation than that of the untreated glass fiber at the same flow rate. Tow deformation in the untreated and gelatin-treated non-crimped glass fiber mats at different flow rates was evaluated by microscopic analysis and quantified using the tow thickness index. Relatively smaller variations in the permeability and minimal changes in the tow thickness of the gelatin-treated glass fiber mat were observed via microscopic analysis, indicating that gelatin effectively maintained the binding structure of the glass fiber mat.

Correction: Enhanced photoluminescence stability and internal defect evolution of the all-inorganic lead-free CsEuCl3 perovskite nanocrystals.

Correction for 'Enhanced photoluminescence stability and internal defect evolution of the all-inorganic lead-free CsEuCl3 perovskite nanocrystals' by Yalei Gao et al., Phys. Chem. Chem. Phys., 2022, 24, 18860-18867, https://doi.org/10.1039/D2CP01374F.

Identifying Metal-Oxo/Peroxo Intermediates in Catalytic Water Oxidation by In Situ Electrochemical Mass Spectrometry.

Molecular catalysis of water oxidation has been intensively investigated, but its mechanism is still not yet fully understood. This study aims at capturing and identifying key short-lived intermediates directly during the water oxidation catalyzed by a cobalt-tetraamido macrocyclic ligand complex using a newly developed an in situ electrochemical mass spectrometry (EC-MS) method. Two key ligand-centered-oxidation intermediates, [(L2-)CoIIIOH] and [(L2-)CoIIIOOH], were directly observed for the first time, and further confirmed by 18O-labeling and collision-induced dissociation studies. These experimental results further confirmed the rationality of the water nucleophilic attack mechanism for the single-site water oxidation catalysis. This work also demonstrated that such an in situ EC-MS method is a promising analytical tool for redox catalytic processes, not only limited to water oxidation.

Enhanced photoluminescence stability and internal defect evolution of the all-inorganic lead-free CsEuCl3 perovskite nanocrystals.

Perovskite materials are prominent candidates for many high-performance optoelectronic devices. The rare-earth lead-free CsEuCl3 perovskite nanocrystals are extremely unstable, which makes it very difficult to study their physicochemical properties and applications. Herein, we improved the stability of rare-earth based CsEuCl3 nanocrystals by employing a silica-coating for the first time. Simultaneously, the naturally formed "hollow" regions with an obviously blue-shifted PL emission were first observed inside the CsEuCl3 nanocrystals during the period of storage. Density functional theory (DFT) calculations showed that the formed "hollow" regions are due to the internal defect evolution in the perovskite lattice, which is also responsible for the increase of the bandgap and the blue-shift of emission. Additionally, the rapid decline of luminescence is probably due to the nanocrystals' final cracking with the expansion of the "hollow" regions. This work helps to understand the relationship between defects and luminescence properties, and provides guidance for the design of more stable lead-free perovskite nanocrystals.

Preparation of Y2O3/TiO2-Loaded Polyester Fabric and Its Photocatalytic Properties under Visible Light Irradiation.

In this study, Y2O3/TiO2-loaded polyester fabric was prepared to improve the catalytic activity of the TiO2 and to increase its reuse efficiency. The samples were systematically characterized by scanning electron microscopy (SEM), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (FT-IR). Furthermore, the degradation performance of methyl orange in the presence of simulated visible light irradiation was also investigated. The results showed that the TiO2 in the Y2O3/TiO2 composite photocatalyst was suitably anatase. In addition, Y2O3/TiO2-loaded polyester fabric had higher photocatalytic performance than that of pure polyester fabric under visible light and the degradation rate reached 83% after 120 min of light exposure but remained above 50% after repeated exposure (three times). Compared to the pure polyester fabric, Y2O3/TiO2-loaded polyester fabric had self-cleaning effects in methyl blue and soy sauce solutions under visible light.

Electrostatic-Gated Kinetics of Rapid Ion Transfers at a Nano-liquid/Liquid Interface.

Charge (ion and electron)-transfer reactions at a liquid/liquid interface are critical processes in many important biological and chemical systems. An ion-transfer (IT) process is usually very fast, making it difficult to accurately measure its kinetic parameters. Nano-liquid/liquid interfaces supported at nanopipettes are advantageous approaches to study the kinetics of such ultrafast IT processes due to their high mass transport rate. However, correct measurements of IT kinetic parameters at nanointerfaces supported at nanopipettes are inhibited by a lack of knowledge of the nanometer-sized interface geometry, influence of the electric double layer, wall charge polarity, etc. Herein, we propose a new electrochemical characterization equation for nanopipettes and make a suggestion on the shape of a nano-water/1,2-dichloroethane (nano-W/DCE) interface based on the characterization and calculation results. A theoretical model based on the Poisson-Nernst-Planck equation was applied to systematically study how the electric double layer influences the IT process of cations (TMA+, TEA+, TPrA+, ACh+) and anions (ClO4-, SCN-, PF6-, BF4-) at the nano-W/DCE interface. The relationships between the wall charge conditions and distribution of concentration and potential inside the nanopipette revealed that the measured standard rate constant (k0) was enhanced when the polarity of the ionic species was opposite to the pipette wall charge and reduced when the same. This work lays the right foundation to obtain the kinetics at the nano-liquid/liquid interfaces.

Detection of Trace Water Based on Electro-oxidation of Molybdenum Disulfide Nanomaterials to Form Molybdenum Oxysulfide.

Molybdenum disulfide nanomaterials nowadays are very popular in electrocatalysis field due to their outstanding catalytic performance toward many electrochemical reactions. However, the electrochemical oxidation reaction of molybdenum disulfide nanomaterials in the range of positive potential has not been studied thoroughly. Herein, we have investigated electro-oxidation of molybdenum disulfide nanomaterials and put forward a new reaction mechanism: molybdenum disulfide nanomaterials are electro-oxidized with water to form molybdenum oxysulfide (MoOS2) and hydrogen ions, leading to the release of hydrogen on the counter electrode. Various characterization methods such as contact angle measurement, scanning electron microscope (SEM), transmission electron microscope (TEM) with energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), and gas chromatography (GC) were applied to attest the doping of oxygen and the generation of hydrogen. Based on this reaction, we constructed a novel ultrasensitive electrochemical sensor for detecting trace water with the minimum detectable content of 0.0010% (v/v) in various organic solvents and ionic liquids, which is comparable to the Karl Fischer titration, but with much simpler reagent.

CD82 palmitoylation site mutations at Cys5+Cys74 affect EGFR internalization and metabolism through recycling pathway.

Tetraspanin CD82 often participates in regulating the function of epidermal growth factor receptor (EGFR) and hepatocyte growth factor receptor (c-Met). Palmitoylation is a post-translational modification that contributes to tetraspanin web formation and affects tetraspanin-dependent cell signaling. However, the molecular mechanisms by which CD82 palmitoylation affects the localization and stability of EGFR and c-Met have not yet been elucidated. This study focuses on the expression and distribution of EGFR and c-Met in breast cancer as well as the related metabolic pathways and molecular mechanisms associated with different CD82 palmitoylation site mutations. The results show that CD82 with a palmitoylation mutation at Cys5+Cys74 can promote the internalization of EGFR. EGFR is internalized and strengthened by direct binding to CD82 with the tubulin assistance and located at the recycling endosome. After studying the recycling pathway marker proteins Rab11a and FIP2, we found that formation of the EGFR/CD82/Rab11a/FIP2 complex promotes the internalization and metabolism of EGFR through the recycling pathway and results in the re-expression of EGFR and CD82 on the cell membrane.

Progress on the Elucidation of the Antinociceptive Effect of Ginseng and Ginsenosides in Chronic Pain.

Ginseng (Panax ginseng C.A. Meyer) is a traditional Oriental herbal drug widely used in East Asia. Its main active ingredients are ginsenosides whose constituents are known to have various pharmacological activities such as anticancer, antinociception, and neuroprotection. The analgesic effects of ginsenosides, such as Rg1, Rg2, and Rb1, as well as compound K, are well known and the analgesic mechanism of action in inflammatory pain models is thought to be the down regulation of pro-inflammatory cytokine expression (TNF-α IL-1ß, and IL-6). Several studies have also demonstrated that ginsenosides regulate neuropathic pain through the modulation of estrogen receptors. Recently, an increasing number of pathways have emerged in relation to the antinociceptive effect of ginseng and ginsenosides. Therefore, this review presents our current understanding of the effectiveness of ginseng in chronic pain and how its active constituents regulate nociceptive responses and their mechanisms of action.

Crystallization Behavior and Electrical Properties of Nanoparticle-Reinforced Poly(lactic Acid)-Based Films.

Graphene oxide (GO) and multiwalled carbon nanotubes with silver particles (MWNT-Ag) of different concentrations were used as nanofillers to prepare poly(lactic acid) (PLA) nanoparticle films through the solvent casting method. In this study, the effects of nanoparticles on the crystallization behavior, relationships between the dispersion and electrical properties, and hydrolytic degradation behaviors were investigated for the PLA/MWNT-Ag and PLA/rGO films. Differential scanning calorimetry was used to evaluate the crystallization behaviors of the PLA/MWNT-Ag and PLA/reduced GO (rGO) films. Electron probe microanalysis was performed to characterize the dispersion of MWNT-Ag, and X-ray diffraction and Raman spectroscopy were used to determine the degree of dispersion of rGO in the PLA matrix. The results showed that nanoparticles enhanced the crystallization kinetics of PLA as well as the hydrolytic degradation rate. From the measurement of electrical properties, the electrical conductivity of PLA/MWNT-Ag 1.0 wt% was much higher than that of the pure PLA and PLA/rGO films, showing that MANT and Ag nanoparticles contribute greatly to enhancing the electrical conductivity of the PLA/MWNT-Ag films.

Revealing the Sulfur Redox Paths in a Li-S Battery by an In Situ Hyphenated Technique of Electrochemistry and Mass Spectrometry.

The lithium-sulfur (Li-S) battery is one of the most promising next generation energy storage systems due to its high theoretical specific energy. However, the shuttle effect of soluble lithium polysulfides formed during cell operation is a crucial reason for the low cyclability suffered by current Li-S batteries. As a result, an in-depth mechanistic understanding of the sulfur cathode redox reactions is urgently required for further advancement of Li-S batteries. Herein, the direct observation of polysulfides in a Li-S battery is reported by an in situ hyphenated technique of electrochemistry and mass spectrometry. Several short-lived lithium polysulfide intermediates during sulfur redox have been identified. Furthermore, this method is applied to a mechanistic study of an electrocatalyst that has been observed to promote the polysulfides conversion in a Li-S cell. Through the abundance distributions of various polysulfides before and after adding the electrocatalyst, compelling experimental evidences of catalytic selectivity of cobalt phthalocyanine to those long-chain polysulfide intermediates are obtained. This work can provide guidance for the design of novel cathode to overcome the shuttle effect and facilitate the sulfur redox kinetics.

Short-term Efficacy and Mechanism of Electrical Pudendal Nerve Stimulation Versus Pelvic Floor Muscle Training Plus Transanal Electrical Stimulation in Treating Post-radical Prostatectomy Urinary Incontinence.

OBJECTIVE: To assess the short-term efficacy of electrical pudendal nerve stimulation (EPNS) versus pelvic floor muscle training (PFMT) plus transanal electrical stimulation (TES) for the early treatment of post-radical prostatectomy urinary incontinence (PRPUI) and explore its mechanism of action. SUBJECTS AND METHODS: A parallel designed randomized controlled trial was conducted at a research institute and a university hospital. Ninety-six PRPUI patients were allocated to EPNS group (64 cases) and PFMT+TES group (32 cases) and treated by EPNS and biofeedback-assisted PFMT plus TES, 3 times a week for 8 weeks, respectively. Outcome measurements were improvement rate, scores of the International Consultation on Incontinence Questionnaire-Urinary Incontinence Short Form (ICIQ-UI SF) and the number of used diapers. RESULTS: After 24 treatments, the efficacy rate of 68.7% in EPNS group was significantly higher than that of 34.4% in PFMT+TES group (P=0.005). The ICIQ-UI SF score, and urine leakage amount score, diaper score, symptom and quality of life improved significantly in both groups and showed Therapy x Treatment interaction, and the above scores in EPNS group were significantly lower than these in PFMT+TES group. Perineal ultrasonographic recordings showed that PFM movement amplitude during EPNS (≥1- <3 mm) was similar to that during PFMT, however, PFM movement EMG amplitude was significantly higher during EPNS than during PFMT (P <0.001). CONCLUSION: EPNS is more effective than PFMT+TES in short-term (8 weeks) treatments of early urinary incontinence after radical prostatectomy. Its mechanism of action is that EPNS can excite the pudendal nerve and simulate PFMT.

A disposable dual-signal enantioselective electrochemical sensor based on stereogenic porous chiral carbon nanotubes hydrogel.

As the highest form of molecular recognition, the chiral molecular recognition is the most difficult measurements. Herein, a disposable dual-signal enantioselective platform was fabricated based on stereoscopic porous chiral carbon nanotubes hydrogel modified screen printed electrode. This kind of chiral hydrogel was prepared by a simple heating method with l-cysteine and chiral single-walled carbon nanotubes of chirality (6,5), and its dispersion and morphology were characterized by several techniques including scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The stereogenic chiral interface was successfully employed to discriminate mandelic acid enantiomers via both oxidation peak intensity and peak potential value of cyclic voltammetry. The chiral recognition mechanism was discussed specifically, which resulted from the formation of an efficient three-dimensional chiral nanospace. The inherent chirality of chiral carbon nanotubes hydrogel, together with their orderly spatial arrangement, can significantly improve the efficiency of chiral recognition compared with traditional electrochemical chiral sensors. As a novel chiral sensing interface, such chiral carbon nanotubes hydrogel was simple to prepare, fast to operate, with good sensitivity and excellent stability for the construction of efficient and practical electrochemical chiral sensors.

Thermosensitive gallic acid-conjugated hexanoyl glycol chitosan as a novel wound healing biomaterial.

In the present study, a novel synthetic tissue adhesive material capable of sealing wounds without the use of any crosslinking agent was developed by conjugating thermosensitive hexanoyl glycol chitosan (HGC) with gallic acid (GA). The degree of N-gallylation was manipulated to prepare GA-HGCs with different GA contents. GA-HGCs demonstrated thermosensitive sol-gel transition behavior and formed irreversible hydrogels upon natural oxidation of the pyrogallol moieties in GA, possibly leading to GA-HGC crosslinks through intra/intermolecular hydrogen bonding and chemical bonds. The GA-HGC hydrogels exhibited self-healing properties, high compressive strength, strong tissue adhesive strength and biodegradability that were adjustable according to the GA content. GA-HGCs also presented excellent biocompatibility and wound healing effects. The results of in vivo wound healing efficacy studies on GA-HGC hydrogels indicated that they significantly promote wound closure and tissue regeneration by upregulating growth factors and recruiting fibroblasts compared to the untreated control group.