ABSTRACT
Flexible and lightweight graphene nanosheet (GN)/waterborne polyurethane (WPU) composites which exhibit high electrical conductivity and electromagnetic shielding performance were prepared. Covalently modifying GNs with aminoethyl methacrylate (AEMA; AEMA-GNs) through free radical polymerization effectively inhibited the restacking and aggregation of the GNs because of the -NH3(+) functional groups grafted on the AEMA-GNs. Moreover, the AEMA-GNs exhibited high compatibility with a WPU matrix with grafted sulfonated functional groups because of the electrostatic attraction, which caused the AEMA-GNs to homogeneously disperse in the WPU matrix. This homogeneous distribution enabled the GNs to form electrically conductive networks. Furthermore, AEMA-GNs with different amounts of AEMA segments were introduced into the WPU matrix, and the effects of the surface chemistry of the GNs on the electrical conductivity and EMI shielding performance of composites were investigated. AEMA-GN/WPU composites with a GN loading of 5 vol % exhibited remarkable electrical conductivity (approximately 43.64 S/m) and EMI shielding effectiveness (38 dB) over the frequency of 8.2 to 12.4 GHz.
ABSTRACT
An effective method is proposed to prepare octa(aminophenyl) silsesquioxane (OAPS) functionalized graphene oxide (GO) reinforced polyimide (PI) composites with a low dielectric constant and ultrastrong mechanical properties. The amine-functionalized surface of OAPS-GO is a versatile starting platform for in situ polymerization, which promotes the uniform dispersion of OAPS-GO in the PI matrix. Compared with GO/PI composites, the strong interfacial interaction between OAPS-GO and the PI matrix through covalent bonds facilitates a load transfer from the PI matrix to the OAPS-GO. The OAPS-GO/PI composite film with 3.0 wt % OAPS-GO exhibited an 11.2-fold increase in tensile strength, and a 10.4-fold enhancement in tensile modulus compared with neat PI. The dielectric constant (D(k)) decreased with the increasing content of 2D porous OAPS-GO, and a D(k) value of 1.9 was achieved.
ABSTRACT
In this study, we developed a simple and powerful method to fabricate flexible and lightweight graphene-based composites that provide high electromagnetic interference (EMI) shielding performance. Electrospun waterborne polyurethane (WPU) that featured sulfonate functional groups was used as the polymer matrix, which was light and flexible. First, graphene oxide (GO)/WPU composites were prepared through layer-by-layer (L-b-L) assembly of two oppositely charged suspensions of GO, the cationic surfactant (didodecyldimethylammonium bromide, DDAB)-adsorbed GO and intrinsic negatively charged GO, depositing on the negatively charged WPU fibers. After the L-b-L assembly cycles, the GO bilayers wrapped the WPU fiber matrix completely and revealed fine connections guided by the electrospun WPU fibers. Then, we used hydroiodic acid (HI) to obtain highly reduced GO (r-GO)/WPU composites, which exhibited substantially enhanced electrical conductivity (approximately 16.8 S/m) and, moreover, showed a high EMI-shielding effectiveness (approximately 34 dB) over the frequency range from 8.2 to 12.4 GHz.
ABSTRACT
Multiwalled carbon nanotube (MWCNT)/carbon fiber (CF)/vinyl ester (VE) laminate composites have been fabricated in this study. Pristine MWCNTs were treated with acid solution, which formed numerous oxygen-containing functional groups onto their surface, resulting in COOH-MWCNTs. Thereafter, acrylic functional groups were grafted onto the COOH-MWCNTs to generate acryl-MWCNTs. Three types of MWCNTs (pristine MWCNTs, COOH-MWCNTs, and acryl-MWCNTs) were used to reinforce the CF/VE-based composites. The dispersion of MWCNTs in the VE matrix and the interfacial interaction between MWCNTs and the VE matrix were investigated. Thereafter, the individual reinforcement efficiencies of these MWCNTs are compared. The flexural strength of the MWCNT/CF/VE composite with 1.0 phr acryl-MWCNTs content is 29.8% greater than that of neat CF/VE composites, and the flexural modulus of the MWCNT/CF/VE composite is 9.9% higher than that of neat CF/VE composites. Compared with neat CF/VE composites, 1.0 phr acryl-MWCNT/CF/VE composites exhibit an approximately 19.9 °C increase in glass transition temperature (Tg). The coefficients of thermal expansion significantly decreased from 47.2 ppm/°C of the neat CF/VE composites to 35.6 ppm/°C of the acryl-MWCNTs/CF/VE composites with 1 phr acryl-MWCNT content. This study provides a method for developing acryl-MWCNT/CF/VE composites with good dispersion of MWCNTs in VE matrix and strong interfacial interaction between the MWCNTs and VE matrix for enhancing the stress transfer from VE matrix to CF reinforcement.
ABSTRACT
This study fabricates amine (NH(2))-functionalized graphene oxide (GO)/polyimide(PI) composite films with high performance using in situ polymerization. Linear poly(oxyalkylene)amines with two different molecular weights 400 and 2000 (D400 and D2000) have been grafted onto the GO surfaces, forming two types of NH(2)-functionalized GO (D400-GO/D2000-GO). NH(2)-functionalized GO, especially D400-GO, demonstrated better reinforcing efficiency in mechanical and thermal properties. The observed property enhancement are due to large aspect ratio of GO sheets, the uniform dispersion of the GO within the PI matrix, and strong interfacial adhesion due to the chemical bonding between GO and the polymeric matrix. The Young's modulus of the composite films with 0.3 wt % D400-GO loading is 7.4 times greater than that of neat PI, and tensile strength is 240% higher than that of neat PI. Compared to neat PI, 0.3 wt % D400-GO/PI film exhibits approximately 23.96 °C increase in glass transition temperature (T(g)). The coefficient of thermal expansion below T(g) is significantly decreased from 102.6 µm/°C (neat PI) to 53.81 µm/°C (decreasing 48%) for the D400-GO/PI composites with low D400-GO content (0.1 wt %). This work not only provides a method to develop the GO-based polyimide composites with superior performances but also conceptually provides a chance to modulate the interfacial interaction between GO and the polymer through designing the chain length of grafting molecules on NH(2)-functionalized GO.
ABSTRACT
BACKGROUND: 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU), a commercial chemotherapeutic drug for treating malignant brain tumors, has poor thermal stability and a short half-life. Immobilization of BCNU on a nanocarrier might increase the thermal stability of BCNU and extend its half-life. METHODS: Nanosized graphene oxide (GO) could be modified by polyacrylic acid (PAA) to improve the aqueous solubility and increase the cell penetration efficacy of the nanocarrier. PAA-GO intended as a drug carrier for BCNU was prepared and characterized in this study. The size and thickness of PAA-GO was investigated by transmission electron microscopy and atomic force microscopy, and the presence of PAA functional groups was confirmed by electron spectroscopy for chemical analysis and thermogravimetric analysis. BCNU was conjugated to PAA-GO by covalent binding for specific killing of cancer cells, which could also enhance the thermal stability of the drug. RESULTS: Single layer PAA-GO (about 1.9 nm) with a lateral width as small as 36 nm was successfully prepared. The optimum drug immobilization condition was by reacting 0.5 mg PAA-GO with 0.4 mg BCNU, and the drug-loading capacity and residual drug activity were 198 µg BCNU/mg PAA-GO and 70%, respectively. This nanocarrier significantly prolonged the half-life of bound BCNU from 19 to 43 hours compared with free drug and showed efficient intracellular uptake by GL261 cancer cells. The in vitro anticancer efficacy of PAA-GO-BCNU was demonstrated by a 30% increase in DNA interstrand cross-linking and a 77% decrease in the IC(50) value toward GL261 compared with the same dosage of free drug. CONCLUSION: Nanosized PAA-GO serves as an efficient BCNU nanocarrier by covalent binding. This nanocarrier will be a promising new vehicle for an advanced drug delivery system in cancer therapy.
