ABSTRACT
Investigation of ohmic contact between iridium (Ir) film and hydrogen-terminated single crystal diamond has been carried out with annealing temperature from 300 to 600 °C in argon (Ar) and hydrogen ambient. Electrodes were deposited on hydrogen-terminated single crystal diamond by electron beam evaporation technique, and specific contact resistivity has been measured by transmission line model. The interface between Ir film and hydrogen-terminated single crystal diamond was characterized by transmission electron microscopy and energy dispersive X-ray spectroscopy. Theoretical calculation value of barrier height between Ir film and hydrogen-terminated single crystal diamond was around -1.1 eV. All results indicate that an excellent ohmic contact could be formed between Ir film and hydrogen-terminated single diamond.
ABSTRACT
The properties of ultraviolet (UV) photodetector fabricated on TiO2/diamond film were investigated. Single crystal diamond layer was grown on high-pressure-high-temperature Ib-type diamond substrate by microwave plasma chemical vapor deposition method, upon which TiO2 film was prepared directly using radio frequency magnetron sputtering technique in Ar and O2 mixing atmosphere. Tungsten was used as electrode material to fabricate metal-semiconductor-metal UV photodetector. The dark current is measured to be 1.12 pA at 30 V. The photo response of the device displays an obvious selectivity between UV and visible light, and the UV-to-visible rejection ratio can reach 2 orders of magnitude. Compared with that directly on diamond film, photodetector on TiO2/diamond film shows higher responsivity.
