Electronic-ionic bi-functional conduction ß-Li3PS4-coated graphene hollow spheres as a highly stable lithium metal anode skeleton.

Although Li metal is considered the most potential anode for Li based batteries, the repeatedly large volume variation and low Coulombic efficiency (CE) are still serious challenges for commercial application. Herein, the interconnect closed hollow graphene spheres with electronic-ionic bi-functional conduction network containing Li4.4Sn nanoparticles loaded internally and ß-Li3PS4 solid electrolyte layer coated externally (ß-LPS/SG/Li4.4Sn) is proposed to achieve uniform and dense Li deposition. Density functional theory (DFT) calculation and experimental results show that Li4.4Sn owns larger Li binding energy and lower nucleation overpotential than spherical graphene (SG), thus being able to guide Li traversing and depositing inside the hollow spheres. The Tafel curves, Li+ diffusion activation energy and experimental results reveal that the ß-Li3PS4 coating layer significantly improves the ionic conductivity of the negative skeleton, covers the defect sites on the SG surface, provides continuous ion transmission channels and accelerates Li+ migration rate. The synergy of both can inhibit the formation of dendritic Li and reduce side reaction between freshly deposited lithium and the organic electrolyte. It's found that Li is preferentially deposited within the SG, evenly deposited on the spherical shell surface until it's completely filled to obtain a dense lithium layer without tip effect. As a result, the ß-LPS/SG/Li4.4Sn anode exhibits a long life of up to 2800 h, an extremely low overpotential (∼13 mV) and a high CE of 99.8 % after 470 cycles. The LiFePO4-based full cell runs stably with a high capacity retention of 86.93 % after 800 cycles at 1C. It is considered that the novel structure design of Li anode skeleton with electron-ionic bi-functional conduction is a promising direction to construct long-term stable lithium metal anodes.

Preschoolers' in-group bias promotes altruistic sharing and reduces second-party punishment: The role of theory of mind.

This study examines how in-group bias affects altruistic sharing and second-party punishment in preschoolers and the role of theory of mind (ToM) in in-group bias. Preschoolers aged 4 to 7 years (N = 309; 160 girls) were asked to share resources with an in-group member and an out-group member (Dictator Game) and to reject or accept an unequal allocation proposed by an in-group member and an out-group member (Ultimatum Game). The results showed that preschoolers shared more resources with, and tolerated more unfair behaviors from, in-group members. ToM influenced the in-group bias in both altruistic sharing and second-party punishment. Notably, children's degree of in-group favoritism in altruistic sharing was positively related to the second-party punishment children imposed on out-group members. However, this pattern was found only among children who had acquired first-order ToM. This study reveals the developmental patterns of preschoolers' in-group bias in altruistic sharing and second-party punishment and the effects of ToM on in-group bias.

Iodine-doped carbon nanotubes boosting the adsorption effect and conversion kinetics of lithium-sulfur batteries.

Compared with lithium-ion batteries (LIBs), lithium-sulfur batteries (LSBs), based on electrochemical reactions involving multi-step 16-electron transformations provide higher specific capacity (1672 mAh g-1) and specific energy (2600 Wh kg-1), exhibiting great potential in the field of energy storage. However, the inherent insulation of sulfur, slow electrochemical reaction kinetics and detrimental shuttle-effect of lithium polysulfides (LiPSs) restrict the development of LSBs in practical applications. Herein, the iodine-doped carbon nanotubes (I-CNTs) is firstly reported as sulfur host material to the enhance the adsorption-conversion kinetics of LSBs. Iodine doping can significantly improve the polarity of I-CNTs. Iodine atoms with lone pair electrons (Lewis base) in iodine-doped CNTs can interact with lithium cations (Lewis acidic) in LiPSs, thereby anchoring polysulfides and suppressing subsequent shuttling behavior. Moreover, the charge transfer between iodine species (electron acceptor) and CNTs (electron donor) decreases the gap band and subsequently improves the conductivity of I-CNTs. The enhanced adsorption effect and conductivity are beneficial for accelerating reaction kinetics and enhancing electrocatalytic activity. The in-situ Raman spectroscopy, quasi in-situ electrochemical impedance spectroscopy (EIS) and Li2S potentiostatic deposition current-time (i-t) curves were conducted to verify mechanism of complex sulfur reduction reaction (SRR). Owing to above advantages, the I-CNTs@S composite cathode exhibits an ultrahigh initial capacity of 1326 mAh g-1 as well as outstanding cyclicability and rate performance. Our research results provide inspirations for the design of multifunctional host material for sulfur/carbon composite cathodes in LSBs.

Perilla juice and ginger juice reduced warmed-over flavor (WOF) in surimi gels: Due to the inhibition of the formation of the WOF compounds and the masking of the WOF.

The effects and reasons of perilla juice (PJ) and ginger juice (GJ) on the reduction of "warmed-over flavor" (WOF) in surimi gels were revealed by detecting odor profiles and protein and lipid oxidation degrees of surimi gels, concentrations and odor activity values (OAVs) of WOF compounds. Adding PJ and GJ to surimi gels significantly reduced the WOF and improved the fish fragrance odor, but sodium ascorbate (SA) only weakened the WOF. The (E,E)-2,4-heptadienal's OAVs in the PJ and GJ groups were decreased by >50% compared with the control check (CK) and SA groups. Meanwhile, surimi gels added with PJ and GJ presented lower lipid and protein oxidation degrees. The verification test indicated that PJ and GJ's aroma had a masking effect on the WOF. In conclusion, PJ and GJ reduced the WOF in surimi gels by preventing WOF compounds' production and masking the WOF with their distinct aroma.

Dry-processed technology for flexible and high-performance FeS2-based all-solid-state lithium batteries at low stack pressure.

All-solid-state lithium batteries (ASSLBs) are considered promising energy storage systems due to their high energy density and inherent safety. However, scalable fabrication of ASSLBs based on transition metal sulfide cathodes through the conventional powder cold-pressing method with ultrahigh stacking pressure remains challenging. This article elucidates a dry process methodology for preparing flexible and high-performance FeS2-based ASSLBs under low stack pressure by utilizing polytetrafluoroethylene (PTFE) binder. In this design, fibrous PTFE interweaves Li6PS5Cl particles and FeS2 cathode components, forming flexible electrolyte and composite cathode membranes. Beneficial to the robust adhesion, the composite cathode and Li6PS5Cl membranes are tightly compacted under a low stacking pressure of 100 MPa which is a fifth of the conventional pressure. Moreover, the electrode/electrolyte interface can sustain adequate contact throughout electrochemical cycling. As expected, the FeS2-based ASSLBs exhibit outstanding rate performance and cyclic stability, contributing a reversible discharged capacity of 370.7 mAh g-1 at 0.3C after 200 cycles. More importantly, the meticulous dQ/dV analysis reveals that the three-dimensional PTFE binder effectively binds the discharge products with sluggish kinetics (Li2S and Fe) to the ion-electron conductive network in the composite cathode, thereby preventing the electrochemical inactivation of products and enhancing electrochemical performance. Furthermore, FeS2-based pouch-type cells are fabricated, demonstrating the potential of PTFE-based dry-process technology to scale up ASSLBs from laboratory-scale mold cells to factory-scale pouch cells. This feasible dry-processed technology provides valuable insights to advance the practical applications of ASSLBs.

Preparation and Properties of Attapulgite/Brucite Fiber-Based Highly Absorbent Polymer Composite.

The ATP-BF-P(HEC-AA-AMPS) composite highly absorbent polymer was copolymerized with acrylic acid (AA) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) using an aqueous solution method with attapulgite (ATP) and attapulgite (ATP) as a matrix. The prepared ATP-BF-P(HEC-AA-AMPS) was characterized in terms of microstructure and tested for its water absorption capacity, water retention properties, and pH dynamic sensing ability. The results showed that the synthesized ATP-BF-P(HEC-AA-AMPS) had a rough and porous surface and a high water absorption capacity and rate, almost reaching the maximum water absorption around 20 min, and demonstrated excellent water retention performance at low and medium temperatures. ATP-BF-P(HEC-AA-AMPS) has a sensitive dynamic sensing ability in different pH solutions, with a high swelling capacity between pH 6.0 and 10.0. When the pH value exceeded 10.0, the swelling rate decreased rapidly. Additionally, the thermal stability and mechanical strength of the highly absorbent polymers were significantly improved after blending with ATP and BF.

An ideal candidate for observing anomalous Hall effect induced by the in-plane magnetic field.

The anomalous Hall effect induced by the in-plane magnetic field (anomalous planar Hall effect) has recently attracted a lot of interests due to its numerous advantages. Although several schemes have been put forward in theory, experimental observations in many materials so far are often accompanied by planar Hall effects due to other mechanisms, rather than the pure anomalous planar Hall effect (APHE). We propose the surface state of the strained topological insulator as an ideal candidate to observe this effect. The surface state exhibits a pure APHE, characterized by a linear dependence on the magnetic field and a 2πperiodicity, which remains robust against the scattering of non-magnetic and various magnetic impurities, as long as the uniaxial strain preserves mirror symmetry. Although a general strain that breaks the mirror symmetry can induce the conventional Drude Hall effect, the anomalous contribution remains dominant. Furthermore, we present a feasible scheme to distinguish between the two contributions based on their distinct magnetic field dependencies. Our work is of great significance for promoting experimental observation of the APHE and provides reference value in the search for other realistic materials.

A 76-base pair duplication within the enhancer region of the HMX1 gene causes sheep microtia.

Sheep congenital microtia is characterized by underdeveloped ears and provides an ideal basis for studying human microtia. This study identified the causal mutation and regulatory mechanisms underlying this disorder. Whole-genome association analysis was conducted using 23 ear tissue samples from sheep with microtia and 28 samples from normal-eared sheep. A significant correlation was found between microtia and a 76-base pair duplication in the enhancer region of the HMX1 gene. Further analysis of offspring phenotypes confirmed an autosomal dominant inheritance pattern. Genotypic analysis showed that individuals that are homozygous for this duplication were earless, heterozygous individuals exhibited shortened ears, and wild-type individuals had normal ears. Moreover, luciferase assays confirmed that this duplication increased HMX1 gene expression, and duplication knock-in mice also exhibited shorter and narrower external ears compared to wild-type mice. Transcriptomic analysis further demonstrated that this duplication enhanced HMX1 gene expression in animal models. This study characterized the causal regulatory mutation underlying sheep microtia.

Novel design of high elastic solid polymer electrolyte for stable lithium metal batteries.

Li metal anodes have high specific capacity and low electrode potential, and have always been considered as one of the most promising anode materials. However, the growth of Li dendrites, unstable solid electrolyte interface layer (SEI), severe side reactions at the Li/electrolyte interface, and infinite volume expansion of the Li anode seriously hinder the practical application of solid-state Li metal batteries (LMBs). Herein, we report a polyurethane elastomer (TPU) material with high elasticity and interfacial stability as a solid polymer electrolyte (SPE) for LMBs. The synergistic effects of its designed soft chain forging (PEO) and hard chain segments (IPDI) can enhance Li ion conductivity, elastic modulus and flexibility of the SPE to settle the challenges of the Li metal anodes. Moreover, Li2S, as a solid-state electrolyte additive, is able to effectively inhibit the occurrence of side reactions at the interface between Li metal and SPE, promote the decomposition of N(CF3SO2)2- and in-situ generation of LiF with low Li+ diffusion barrier and excellent electronic insulation, achieving rapid Li ion transport and uniform Li deposition. As a result, stable cycle of up to 1400 h has been achieved for a Li||TPU-Li2S||Li battery at 0.1 mA/cm2 at 50 ℃, accompanied with a stable cycling performance of 350 h at a higher current density of 0.5 mA/cm2. Finally, the LiFePO4||TPU-Li2S||Li full battery exhibits an excellent cycling performance with a capacity retention rate of 80 % after 500 cycles at 1C. This simple and low-cost strategy provides novel design thoughts for practical application of high-performance SPEs in stable and long-life LMBs.

Edge Removal and Q -Learning for Stabilizability of Boolean Networks.

This article develops a new edge removal mechanism for the global stabilizability of Boolean networks (BNs). In order to achieve the edge removal control, several control variables are properly placed into the dynamics of BNs based on the fundamental logical operators. On the basis of the new edge removal mechanism, several necessary and sufficient conditions are obtained for the global stabilizability and set stabilizability of BNs. Furthermore, a kind of stable edge removal control is proposed and achieved via the Q -learning algorithm to optimize the edge removal mechanism. As an application, the edge removal control is used to verify whether or not the mammalian cortical area development model can be made stabilizable to the expected stable states.

Investigation of the effect of chemical composition of surimi and gelling temperature on the odor characteristics of surimi products based on gas chromatography-mass spectrometry/olfactometry.

This study investigated the effects of chemical composition of surimi (prepared by 0, 1, or 2 times of rinsing) and gelling temperature (90 °C and 100 °C) on the odor characteristics of surimi products and the relationship between the chemical composition of surimi and the aroma of surimi products. The once- and twice-rinsed surimi showed a decrease (p < 0.05) of 71.32%, 74.60%, 42.79% and 61.12% in the contents of total amino acids and total fatty acids, respectively. The surimi products prepared with un-rinsed surimi at 90 °C had the highest fish-fragrance score, while those prepared with once-rinsed surimi at 100 °C showed the strongest warmed-over flavor (WOF) and the lowest fish-fragrance score.Gly, Phe, and most of the saturated fatty acids were associated with WOF formation in surimi products, while Leu, Ile, Val, Asp, and unsaturated fatty acids were positively related to their fish-fragrance note.

Construction of high elastic artificial SEI for air-stable and long-life lithium metal anode.

Compared with other anode materials, Li metal anode has higher capacity density and lower electrode potential, which has been considered as one of the most promising anode materials. However, the unstable solid electrolyte interface (SEI) leads to Li dendrite growth and the infinite volumetric expansion of Li metal, which seriously hinders the stability and cycle life of Li metal batteries (LMBs). Here, a polyurethane elastomer (TPU) material with high elasticity and air stability is used as the artificial SEI of Li metal anode. Its designed synergistic effect of soft chain forging and hard chain segments not only gives TPU artificial SEI layer good electronic insulation, Li ion conductivity, Li dendrite growth inhibition, high elastic modulus and flexibility to adapt to Li volume expansion, but also has a significant air protection effect on the Li metal surface, so that the TPU coated Li foil will not occur obvious oxidation phenomenon after being placed in air for 45 min. The Li symmetric battery modified by TPU achieved a stable and long-term cycle performance of 1300 h at 1 mA/cm2, it can also cycle stably at a high current density of 10 mA/cm2. The Coulomb efficiency of the modified Li/Cu half-cell maintains at above 97% after 400 cycles. In addition, the full cell with LiFePO4 cathode also delivers a very excellent long cycle stability with 90% capacity retention after 1500 cycles at 5 C. This surface modification strategy of SEI on lithium anode has has great research value and will help to improve the widely application of LMBs.

Construction of Synchronous-Deposition K Metal Anodes Via Modulation of Ion/Electron Transport Kinetics for High-Rate and Low-Temperature K Metal Batteries.

The construction of conductive scaffolds is demonstrated to be an ideal strategy to alleviate the volume expansion and dendrite growth of K metal anodes. Nevertheless, the heterogeneous top-bottom deposition behavior caused by incompatible electronic/ionic conductivity of three-dimensional (3D) skeleton severely hinders its application. Here, a K2 Se/Cu conducting layer is fabricated on the Cu foam so as to enhance ionic transport and weaken electronic conductivity of the skeleton. Then, an excellent simultaneous deposition behavior of K metal inside the host is obtained for the first time via tuning fast ionic transport and low electronic conductivity. The simultaneous deposition mode can not only utilize the entire 3D structure to accommodate the volume expansion during K deposition but also avoid the formation of K dendrites at high current and ultra-low temperature. Consequently, the symmetric cells present a long cycle lifespan over 1000 h with a low deposition overpotential of 80 mV at 1 mA cm-2 . Furthermore, the full cell matching with the perylene-tetracarboxylic dianhydride (PTCDA) cathode presents an outstanding cycle lifespan over 600 cycles at 5 C at -20°C. The proposed simultaneous deposition strategy provides a new design direction for the construction of dendrite-free K metal anodes.

Facile and High-Efficiency Chemical Presodiation Strategy on the SnS2/rGO Composite Anode for Stable Sodium-Ion Batteries.

SnS2/reduced graphite oxide (rGO) composite materials show great potential as high-performance anode candidates in sodium-ion batteries (SIBs) owing to their high specific capacities and power densities. However, the repeated formation/decomposition of the solid electrolyte interface (SEI) layer around composite anodes usually consumes additional sodium cations, resulting in poor Coulombic efficiency and decreasing specific capacity upon cycling. Therefore, in order to compensate for the large irreversible sodium loss of the SnS2/rGO anode, this study has proposed a facile strategy by implementing organic solutions of sodium-biphenyl/tetrahydrofuran (Na-Bp/THF) and sodium-naphthylamine/dimethoxyethane (Na-Naph/DME) as chemical presodiation reagents. Particularly, the storage stability of Na-Bp/THF and Na-Naph/DME in ambient air accompanied by their presodiation behavior on the SnS2/rGO anode has been investigated, and both reagents exhibited desirable ambient air-tolerant storage stability with favorable sodium supplement effects even after 20 days of storage. More importantly, the initial Coulombic efficiency (ICE) of SnS2/rGO electrodes could be controllably increased by immersing in a presodiation reagent for different durations. Consequently, with a facile chemical presodiation strategy of immersion in Na-Bp/THF solution for only 3 min in ambient air, the presodiated SnS2/rGO anode has exhibited an outstanding electrochemical performance with a high ICE of 95.6% as well as an ultrahigh specific capacity of 879.2 mAh g-1 after 300 cycles (83.5% of its initial capacity), highly superior to the pristine SnS2/rGO anode. This efficient and scalable presodiation strategy provides a new avenue for the prevailing application of other anode candidates in high-energy SIBs.

In-situ cross-linked multifunctional polymer electrolyte buffer layers for high-performance garnet solid-state lithium metal batteries.

The garnet Li6.75La3Zr1.75Ta0.25O12 (LLZTO) is one of the most promising electrolytes for commercial application since of its high ionic conductivity and good stability to Li. Nevertheless, the poor electrolyte/electrode interface contact enlarges the interface impedance of all-solid-state battery (ASSB). Herein, a multifunctional polymer electrolyte (MPE) interface buffer layers are formed on both sides of LLZTO surface through an in-situ crosslinking strategy to improve the interface contact with electrodes, which can facilitate uniform Li+ deposition/exfoliation and inhibit the growth of lithium dendrites as evidenced by the reduced interface impedance (103.4 Ω cm2), the increased critical current density (CDD, 1.2 mA cm-2) and 950 h stable cycle of Li symmetric cells at 0.7 mA cm-2, 0.7 mA h cm-2. Besides, the MPE layer can reduce the magnitude of electric field at the interface and widen the electrochemical window (0∼5.2 V). The stable interface of the LLZTO@MPE/cathode enables the full cells matching with the LiFePO4 (LFP) and LiNi0.5Co0.2Mn0.3O2 (NCM523) cathodes to deliver superior electrochemical performances. Specifically, the Li/MPE@LLZTO@MPE/LFP delivers a capacity retention rate of 87% after 200 cycles at 1 C. When it's matched with the NCM523 cathode, a capacity retention rate of 98% is retained after 100 cycles at 1 C. This work provides an effective and simple way to build good-interface-contact and long-lifespan garnet solid-state lithium metal batteries (SSLMBs).

Long divergent haplotypes introgressed from wild sheep are associated with distinct morphological and adaptive characteristics in domestic sheep.

The worldwide sheep population comprises more than 1000 breeds. Together, these exhibit a considerable morphological diversity, which has not been extensively investigated at the molecular level. Here, we analyze whole-genome sequencing individuals of 1,098 domestic sheep from 154 breeds, and 69 wild sheep from seven Ovis species. On average, we detected 6.8%, 1.0% and 0.2% introgressed sequence in domestic sheep originating from Iranian mouflon, urial and argali, respectively, with rare introgressions from other wild species. Interestingly, several introgressed haplotypes contributed to the morphological differentiations across sheep breeds, such as a RXFP2 haplotype from Iranian mouflon conferring the spiral horn trait, a MSRB3 haplotype from argali strongly associated with ear morphology, and a VPS13B haplotype probably originating from urial and mouflon possibly associated with facial traits. Our results reveal that introgression events from wild Ovis species contributed to the high rate of morphological differentiation in sheep breeds, but also to individual variation within breeds. We propose that long divergent haplotypes are a ubiquitous source of phenotypic variation that allows adaptation to a variable environment, and that these remain intact in the receiving population probably due to reduced recombination.

Introduction of the FecGF mutation in GDF9 gene via CRISPR/Cas9 system with single-stranded oligodeoxynucleotide.

The clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated (Cas) 9 system has been a recent focus of breeders owing to its potential to improve economically significant traits of livestock. The introduction of defined point mutations into the ovine genome via CRISPR/Cas9-mediated homology-directed repair has been reported; however, indel and mosaic events observed in genetically modified animals limit the practical application of this system in sheep breeding. The FecGF mutation (g. G1111A, p. V371 M) in the growth differentiation factor 9 (GDF9) gene is strongly associated with litter size in Belclare and Norwegian White Sheep. In the present study, we introduced the FecGF mutation in GDF9 by co-injecting the CRISPR/Cas9 system, single-stranded oligodeoxynucleotide (ssODN), and Scr7 into ovine zygotes. Scr7 at various concentrations (0 µM, 1 µM, and 2 µM) had no adverse effects on embryonic development in vitro. No significant differences in total mutation, point mutation, and indel rates in embryos were observed among groups treated with different concentrations of Scr7. However, the mosaicism rates of embryos from zygotes microinjected with 1 and 2 µM Scr7 were significantly lower than that for 0 µM Scr7 (7.7% and 7.5% vs. 19.7%). We successfully obtained lambs with defined nucleotide substitutions by the coinjection of Cas9 mRNA, sgRNA, ssODN, and 1 µM Scr7 into Altay sheep zygotes. The single nucleotide mutation efficiency was 7.69% (3/39) in newborn lambs, with one mosaic. Our findings provide evidence that Scr7 could improve the specificity of the CRISPR/Cas9 system for the introduction of a defined point mutation in livestock to some extent.

Effect of Ultraviolet-A Radiation on Alicyclic Epoxy Resin and Silicone Rubber Used for Insulators.

Compared with the high-temperature vulcanized silicone rubber (HTVSR) insulator, the alicyclic epoxy resin insulator has higher hardness and better bonding between the core and the sheath. This makes the latter very promising in the coastal area of Southern China. Outdoor insulators are often subjected to high intensity of ultraviolet (UV)-A radiation. The influence of UV-A radiation is significant for alicyclic epoxy resin insulators. To help address the concern, the surface of two kinds of samples, namely the alicyclic epoxy resin insulator and HTVSR insulator, with UV-A aging time was characterized by tests of scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR). The operation properties (mechanical properties, hydrophobicity) for outdoor insulators were also analyzed. It was found that the appearance color of the alicyclic epoxy resin has changed greatly, and there is a certain degree of fading. The mechanical properties of the alicyclic epoxy resin are maintained well and, the hydrophobicity decreases gradually. For silicone rubber, the appearance color change of silicone rubber is smaller, and the mechanical properties of silicone rubber decreased greatly. In addition, although the hydrophobicity of silicone rubber decreased gradually, it is still better than that of alicyclic epoxy resin. Both materials have broken chemical bonds, but the degree is relatively light, which meets the requirements of insulators for outdoor operation.

Genomic analyses of wild argali, domestic sheep, and their hybrids provide insights into chromosome evolution, phenotypic variation, and germplasm innovation.

Understanding the genetic mechanisms of phenotypic variation in hybrids between domestic animals and their wild relatives may aid germplasm innovation. Here, we report the high-quality genome assemblies of a male Pamir argali (O ammon polii, 2n = 56), a female Tibetan sheep (O aries, 2n = 54), and a male hybrid of Pamir argali and domestic sheep, and the high-throughput sequencing of 425 ovine animals, including the hybrids of argali and domestic sheep. We detected genomic synteny between Chromosome 2 of sheep and two acrocentric chromosomes of argali. We revealed consistent satellite repeats around the chromosome breakpoints, which could have resulted in chromosome fusion. We observed many more hybrids with karyotype 2n = 54 than with 2n = 55, which could be explained by the selfish centromeres, the possible decreased rate of normal/balanced sperm, and the increased incidence of early pregnancy loss in the aneuploid ewes or rams. We identified genes and variants associated with important morphological and production traits (e.g., body weight, cannon circumference, hip height, and tail length) that show significant variations. We revealed a strong selective signature at the mutation (c.334C > A, p.G112W) in TBXT and confirmed its association with tail length among sheep populations of wide geographic and genetic origins. We produced an intercross population of 110 F2 offspring with varied number of vertebrae and validated the causal mutation by whole-genome association analysis. We verified its function using CRISPR-Cas9 genome editing. Our results provide insights into chromosomal speciation and phenotypic evolution and a foundation of genetic variants for the breeding of sheep and other animals.