ABSTRACT
Sleeve grouting compactness has a significant effect on the mechanical properties of rebar connections. However, a detection method for the grouting compactness inside the sleeve is still lacking. Therefore, the aim of this paper is to propose a new acoustic emission (AE) detection technology for horizontal defects and vertical defects in sleeves with different grout compactness. The basic waveform characteristic of the AE signal is analyzed. The results show that the count of acoustic emission signals decreases with the increase of grouting compactness, and the reduction rate of vertical defects is larger than that of horizontal defects. The acoustic emission waveform is further processed through wavelet packet decomposition. It is found that with the increase of grouting compactness, the composition of approximately 125-187.5 kHz in the signal is accelerated to approximately 62.5-125 kHz. The grouting compactness index is constructed by wavelet packet energy ratio. With the increase of grouting compactness, the compactness index decreases exponentially, indicating that the presence of defects can greatly reduce the attenuation of elastic wave energy. The compactness index is highly consistent with the size of defects and has little relationship with the distribution of grout materials. Experiments show that the proposed method is effective when grout defects reach a certain degree and provides a new method for sleeve grouting compactness detection.
ABSTRACT
The bistability of anti-symmetric thin shallow cylindrical polymer composite shells, made of carbon fiber/epoxy resin, has already been investigated based on the uniform curvature and inextensible deformation assumptions by researchers in detail. In this paper, a non-uniform curvature model that considers the extensible deformations is proposed. Furthermore, a parametric modeling and automatic postprocessing plug-in component for the bistability analysis of polymer composite cylindrical shells is established by means of ABAQUS-software, by which the equilibrium configurations and the load-displacement curves during the snap process can be easily obtained. The presented analytical model is validated by the numerical simulation and literature models, while the factors affecting the bistability of anti-symmetric cylindrical shells are revisited. In addition, the planform effects of anti-symmetric cylindrical shells with rectangular, elliptical and trapezoidal planform are discussed. The results show that the presented analytical model improves the accuracy of the prediction of the principal curvature of second equilibrium configuration and agree well with the numerical results.
