Individual treatment strategy of thyroglossal duct cyst carcinoma: a case report.

Background: Neoplasia of ectopic thyroid components is relatively rare in thyroglossal duct cysts. We report a case of histopathologically confirmed papillary thyroid carcinoma in a thyroglossal duct cyst, discuss its clinical characteristics of, and provide reference for diagnosis and treatment. Case Description: We presented a 25-year-old female went to hospital because of "a tumor in her neck". She was preoperatively diagnosed with thyroglossal duct cyst by cervical ultrasound, and enhanced computed tomography (CT). However, the solid component of the mass suggested intracystic neoplasia. She underwent Sistrunk surgical resection, and postoperative histopathology showed thyroglossal duct cyst, and papillary thyroid carcinoma in the cyst wall. The patient had no high-risk factors and had a low risk of recurrence. After full disclosure, the patient chose close follow-up, and to date there has been no recurrence. Conclusions: There are controversies regarding the origin of thyroglossal duct cyst carcinoma and the extent of surgery required, and a lack of unified treatment guidelines. We recommend tailoring individualized treatment based on individual risk stratification. By reporting this case, we hope to inform surgeons of the various abnormalities that may occur in ectopic thyroid tissue.

Predictive Value of Spinal Cord Function Classification and Sagittal Deformity Angular Ratio for Neurologic Risk Stratification in Patients with Severe and Stiff Kyphoscoliosis.

BACKGROUND: Three-column osteotomies were developed to treat severe spinal deformities but result in high neurologic complications and require further risk stratification. The present study investigated whether the combination of spinal cord function classification (SCFC) and deformity angular ratio (DAR) could further stratify the neurologic risks in the surgical correction of severe and stiff kyphoscoliosis. METHODS: The patients with kyphoscoliosis who had undergone posterior 3-column osteotomies at the spinal cord level were reviewed. Using our SCFC system, the preoperative neurologic function (type A, B, or C) was classified. The sagittal DAR (S-DAR), coronal, and total DARs were calculated. Intraoperative monitoring events and new neurologic deficits (NNDs) postoperatively were documented and analyzed using the SCFC and DAR or both combined. RESULTS: The NND rates increased significantly from type A to C (P = 0.000) and increased exponentially with an increase in S-DAR in types B and C but not type A. They also increased exponentially with aggravation of the SCFC in the medium and high but not low S-DAR group. All NNDs had recovered at 3 months for type A and most had recovered at 6 months for type B or C. CONCLUSIONS: The NNDs in type A SCFC usually experienced better recovery even with high S-DARs. Type B SCFC with an S-DAR >20° and type C SCFC with any S-DAR resulted in significantly greater intra- and postoperative neurologic risks. The combination of SCFC and S-DAR can further stratify the intra- and postoperative neurologic risks with these procedures.

Computed Tomography Based Three-dimensional Measurements of Spine Shortening Distance After Posterior Three-column Osteotomies for the Treatment of Severe and Stiff Scoliosis.

STUDY DESIGN: Retrospective study. OBJECTIVES: This study is to measure and analyze the changes of three-dimensional (3D) distances of spinal column and spinal canal at the three-column osteotomy sites and address their clinical and neurologic significance. SUMMARY OF BACKGROUND DATA: Three-column osteotomies were developed to treat severe and stiff spine deformities with insufficient understanding on the safe limit of spine shortening and the relationship between the shortening distance of the spinal column and that of the spinal canal. METHODS: Records of 52 continuous patients with severe and stiff scoliosis treated with three-column spine osteotomies at our institution from July 2013 to June 2015 were reviewed. The preoperative spinal cord function classification were type A in 31 cases, type B in 10 cases, and type C in 11 cases. The types of osteotomies carried out were extended pedicle subtraction osteotomy in nine patients and posterior vertebral column resection in 43 patients. Multimodality neuromonitoring strategies were adopted intraoperatively. 3D pre- and postoperative spine models were reconstructed from the computed tomography (CT) scans. The distances of convex and concave spinal column and the spinal canal shortening were measured and analyzed. RESULTS: The spinal column shortening distance (SCSD) measured on the 3D models (27.8 mm) were statistically shorter than those measured intraoperatively (32.8 mm) (P < 0.05); however, they were strongly correlated statistically (r = 0.82). The central spinal canal shortening distance (CCSD) was significantly shorter than the convex SCSD (P < 0.05). The convex SCSD and CCSD were significantly shorter in cases with anterior column strut graft than in those with bone-on-bone fusion (P < 0.05). CONCLUSION: The shortening distance of the convex spinal column cannot represent that of the central spinal canal in patients with severe scoliosis. The spinal column shortening procedure in appropriately selected patient groups with bone-on-bone fusion is a viable option with the CCSD being significantly shorter than the convex SCSD. LEVEL OF EVIDENCE: 4.

An 11-Year Review of the TARP Procedure in the Treatment of Atlantoaxial Dislocation.

STUDY DESIGN: Retrospective study. OBJECTIVE: The aim of the study was to introduce the surgical techniques and evaluate the clinical outcomes of transoral atlantoaxial reduction plate (TARP) for the treatment of atlantoaxial dislocation. SUMMARY OF BACKGROUND DATA: Researchers have reported on transoral plate internal fixation for the treatment of irreducible atlantoaxial dislocation (IAAD) without long-term follow-up and detailed clinical experience. METHODS: The clinical records of 388 patients with atlantoaxial dislocation (IAAD, 340 cases; fixed atlantoaxial dislocation [FAAD], 48 cases) who received the TARP procedure from April 2003 to September 2014 were retrospectively reviewed. They were treated separately with TARP-I or TARP-II (82 cases), TARP-III (248 cases), or TARP-IV (58 cases). X-ray and magnetic resonance imaging were used to evaluate the efficacy of reduction and the degree of decompression, respectively. The long-term clinical outcome was evaluated by Japanese Orthopaedic Association scoring and the Symon and Lavender standard. RESULTS: Immediate reduction was achieved for all the patients with IAAD (340/340), whereas anatomical reduction was achieved for 98.2% of patients (334/340). Anatomical reduction was achieved in 87.5% of patients with FAAD (42/48). The average degree of spinal cord decompression ranged from 75% to 100% with an average of 88.4%. The clinical data of 106 patients were evaluated in the latest follow-up (12-108 mo, average 60.5 mo). The average spinal cord improvement rate by Japanese Orthopaedic Association scoring was 62.1%. According to the Symon and Lavender standard, there were 85 cases rated as markedly effective, 104 cases as effective, and 2 cases as noneffective. The overall markedly effective rate was 80% and the effective rate was 98%. CONCLUSION: The TARP procedure showed good anterior atlantoaxial release, reduction, decompression, and internal fixation for patients with IAAD and FAAD through a single anterior approach. It has the advantages of three-dimensional immediate atlantoaxial reduction and sufficient decompression. LEVEL OF EVIDENCE: 3.

The development and evaluation of individualized templates to assist transoral C2 articular mass or transpedicular screw placement in TARP-IV procedures: adult cadaver specimen study.

OBJECTIVES: The transoral atlantoaxial reduction plate system treats irreducible atlantoaxial dislocation from transoral atlantoaxial reduction plate-I to transoral atlantoaxial reduction plate-III. However, this system has demonstrated problems associated with screw loosening, atlantoaxial fixation and concealed or manifest neurovascular injuries. This study sought to design a set of individualized templates to improve the accuracy of anterior C2 screw placement in the transoral atlantoaxial reduction plate-IV procedure. METHODS: A set of individualized templates was designed according to thin-slice computed tomography data obtained from 10 human cadavers. The templates contained cubic modules and drill guides to facilitate transoral atlantoaxial reduction plate positioning and anterior C2 screw placement. We performed 2 stages of cadaveric experiments with 2 cadavers in stage one and 8 in stage two. Finally, guided C2 screw placement was evaluated by reading postoperative computed tomography images and comparing the planned and inserted screw trajectories. RESULTS: There were two cortical breaching screws in stage one and three in stage two, but only the cortical breaching screws in stage one were ranked critical. In stage two, the planned entry points and the transverse angles of the anterior C2 screws could be simulated, whereas the declination angles could not be simulated due to intraoperative blockage of the drill bit and screwdriver by the upper teeth. CONCLUSIONS: It was feasible to use individualized templates to guide transoral C2 screw placement. Thus, these drill templates combined with transoral atlantoaxial reduction plate-IV, may improve the accuracy of transoral C2 screw placement and reduce related neurovascular complications.

The development and evaluation of individualized templates to assist transoral C2 articular mass or transpedicular screw placement in TARP-IV procedures: adult cadaver specimen study

OBJECTIVES: The transoral atlantoaxial reduction plate system treats irreducible atlantoaxial dislocation from transoral atlantoaxial reduction plate-I to transoral atlantoaxial reduction plate-III. However, this system has demonstrated problems associated with screw loosening, atlantoaxial fixation and concealed or manifest neurovascular injuries. This study sought to design a set of individualized templates to improve the accuracy of anterior C2 screw placement in the transoral atlantoaxial reduction plate-IV procedure. METHODS: A set of individualized templates was designed according to thin-slice computed tomography data obtained from 10 human cadavers. The templates contained cubic modules and drill guides to facilitate transoral atlantoaxial reduction plate positioning and anterior C2 screw placement. We performed 2 stages of cadaveric experiments with 2 cadavers in stage one and 8 in stage two. Finally, guided C2 screw placement was evaluated by reading postoperative computed tomography images and comparing the planned and inserted screw trajectories. RESULTS: There were two cortical breaching screws in stage one and three in stage two, but only the cortical breaching screws in stage one were ranked critical. In stage two, the planned entry points and the transverse angles of the anterior C2 screws could be simulated, whereas the declination angles could not be simulated due to intraoperative blockage of the drill bit and screwdriver by the upper teeth. CONCLUSIONS: It was feasible to use individualized templates to guide transoral C2 screw placement. Thus, these drill templates combined with transoral atlantoaxial reduction plate-IV, may improve the accuracy of transoral C2 screw placement and reduce related neurovascular complications. .

An experimental study of nerve bypass graft.

OBJECTIVE: To study the use of a nerve ''bypass'' graft as a possible alternative to neurolysis or segmental resection with interposition grafting in the treatment of neuroma-in-continuity. METHODS: A sciatic nerve crush injury model was established in the Sprague-Dawley rat by compression with a straight hemostatic forceps. Epineurial windows were created proximal and distal to the injury site. An 8-mm segment of radial nerve was harvested and coaptated to the sciatic nerve at the epineurial window sites proximal and distal to the compressed segment (bypass group). A sciatic nerve crush injury without bypass served as a control. Nerve conduction studies were performed over an 8-week period. Sciatic nerves were then harvested and studied under transmission electron microscopy. Myelinated axon counts were obtained. RESULTS: Nerve conduction velocity was significantly faster in the bypass group than in the control group at 8 weeks (63.57 m/s+/-5.83 m/s vs. 54.88 m/s+/-4.79 m/s, P<0.01). Myelinated axon counts in distal segments were found more in the experimental sciatic nerve than in the control sciatic nerve. Significant axonal growth was noted in the bypass nerve segment itself. CONCLUSION: Nerve bypass may serve to augment peripheral axonal growth while avoiding further loss of the native nerve.