ABSTRACT
Introduction: Human cytomegalovirus (HCMV) is the most common viral infection seen in newborns. The major route of transmission for acquired human cytomegalovirus infection is breast milk from mothers who are HCMV seropositive to the infants. Thus, a rapid, economical, and simple method to perform HCMV test in breast milk is crucial and necessary for preventing acquired HCMV infection, especially in underdeveloped regions with limited laboratory resources. Methods: In this study, an effective technique for the detection of HCMV was constructed by combining multienzyme isothermal rapid amplification (MIRA) and lateral flow chromatography strip (LFD). Primers for the conserved HCMV sequence UL83 were utilized for MIRA-LFD testing. Results: Our results showed that the entire MIRA reaction could be completed in 12 minutes at 37°C, and LFD outcomes could be observed visibly after 10 minutes. The detection sensitivity of this method reached 50 copy/µl. Samples of breast milk were examined to compare MIRA-LFD and conventional qPCR. The accuracy of MIRA-LFD was 100%. Discussion: The straightforward, rapid, economic features of the test can provide the significant advantages for the prevention of breast milk-acquired cytomegalovirus infection, particularly in resource-limited locations with high seroprevalence of cytomegalovirus.
Subject(s)
Cytomegalovirus Infections , Cytomegalovirus , Milk, Human , Molecular Diagnostic Techniques , Nucleic Acid Amplification Techniques , Sensitivity and Specificity , Humans , Cytomegalovirus/genetics , Cytomegalovirus/isolation & purification , Milk, Human/virology , Cytomegalovirus Infections/diagnosis , Cytomegalovirus Infections/virology , Nucleic Acid Amplification Techniques/methods , Molecular Diagnostic Techniques/methods , Female , Infant, Newborn , Time FactorsABSTRACT
OBJECTIVE: This systematic review aims to assess the feasibility, acceptability, and efficacy of exercise-based interventions in reducing craving levels among individuals with drug dependency. METHODS: This study included randomized controlled trials that investigated the effects of exercise on craving levels in individuals with drug dependence. We searched for relevant literature in PubMed, Web of Science, EMbase, The Cochrane Library, CNKI, China Biomedicine, Wanfang, and VIP databases from their inception until July 2024. Two researchers independently reviewed the literature. The quality of the studies was assessed using the PEDro scale, and the GRADE profiler software was utilized to evaluate the strength of the evidence. A qualitative synthesis was performed to describe the findings. RESULTS: We included 26 studies involving a total of 1381 participants, with 787 in the experimental group and 594 in the control group. These studies were mainly conducted in China, the United States, and the United Kingdom, and were published mostly after 2018. The participants had typically been dependent on drugs for more than 5 years. The review found that exercise interventions were feasible and well-accepted, and effectively reduced drug cravings. Among the 26 studies, 22 showed positive outcomes in reducing cravings. The type of exercise appears to be a crucial factor. Aerobic exercises were more effective than resistance exercises. Out of 18 studies that included aerobic exercises, 17 reported significant reductions in cravings. In contrast, among the 4 studies that included resistance exercises, 3 did not find a significant impact on cravings. CONCLUSION: Exercise is highly feasible and acceptable, significantly contributing to the reduction of drug cravings among individuals with drug dependency. The specific type of exercise appears to be a key determinant of the intervention's effectiveness. Aerobic exercises were more effective than resistance exercises. The evidence supporting these findings is of high quality, with an average score of 6.92 on the PEDro scale. OTHERS: The research was supported by the Shanghai Key Laboratory of Human Performance, with the project number 11DZ2261100. Registration details can be found on PROSPEO under the number CRD42024525700 at www.crd.york.ac.uk.
ABSTRACT
The ability to freeze and stabilize reaction intermediates in their metastable states and obtain their structural and chemical information with high spatial resolution is critical to advance materials technologies such as catalysis and batteries. Here, we develop an electrified operando-freezing methodology to preserve these metastable states under electrochemical reaction conditions for cryogenic electron microscopy (cryo-EM) imaging and spectroscopy. Using Cu catalysts for CO2 reduction as a model system, we observe restructuring of the Cu catalyst in a CO2 atmosphere while the same catalyst remains intact in air at the nanometer scale. Furthermore, we discover the existence of a single valence Cu (1+) state and C-O bonding at the electrified liquid-solid interface of the operando-frozen samples, which are key reaction intermediates that traditional ex situ measurements fail to detect. This work highlights our novel technique to study the local structure and chemistry of electrified liquid-solid interfaces, with broad impact beyond catalysis.
ABSTRACT
To systematically evaluate the intervention effect of music therapy on anxiety and depression in breast cancer patients. Randomised controlled trial (RCT) on music therapy for anxiety and depression in breast cancer patients was searched from 7 major databases, PubMed, Embase, the Cochrane Library, WOS, CNIC, Wanfang, and Wipro, spanning the period of library construction to 23 October 2023, and the literature screening of music therapy for anxiety or depression in breast cancer patients was carried out by 2 experimentalists, each of whom conducted a literature screening RCT independently of the other anxiety or depression in a RCT. Methodological quality was evaluated using the PEDro scale; GRADE profiler software for quality of evidence; and RevMan 5.4 was used for effect size merging and forest plots; publication bias tests and sensitivity analyses were performed using Stata 17.0; and standardized mean difference (SMD) and 95% CI were used as the effect statistics. A total of 13 RCTs with 1326 subjects (aged 18-70 years) were included in the literature, with a mean PEDro score of 6.8, and the literature was overall of good methodological quality. Meta-analysis showed that music therapy improved anxiety in breast cancer patients (841 cases), with a combined effect size (SMD = - 0.82, 95% CI [- 1.03, - 0.61] and P < 0.001); and improved depression in breast cancer patients (387 cases) with a combined effect size (SMD = - 0.76, 95% CI [- 1.15, - 0.38], P < 0.001). Subgroup analyses showed that music intervention with off-site music (757 cases) and music choice of non-self-selected music (537 cases) had the best effect on anxiety improvement, with corresponding combined effect sizes (SMD = - 0.88, P < 0.001; SMD = - 0.83, P < 0.001), respectively; followed by an intervention length of < 30 min (589 cases), a frequency of 2 times/day (382 cases), and intervention period of 2-3 weeks (101 cases) had the best effect on anxiety improvement, and the corresponding combined effect sizes were (SMD = - 0.80, P < 0.001; SMD = - 0.91, P < 0.001; SMD = - 1.02, P < 0.001), respectively; and the music selection was the choice of one's own favourite music among the expert recommendations (219 cases) (270 cases) had the best effect on the improvement of depressed mood, with combined effect sizes of (SMD = - 1.15, P < 0.001; SMD = - 0.71, P < 0.001) and music with an intervention duration of 30 min (287 cases), an intervention frequency of 1 time/day (348 cases), and an intervention period of 2-4 weeks (120 cases), respectively, with corresponding combined effect sizes of (SMD = - 0.75, P < 0.001; SMD = - 0.86, P < 0.001; SMD = - 1.06, P < 0.001), respectively. Music therapy can improve anxiety and depression in breast cancer patients, and the level of evidence is moderate. Although the heterogeneity between studies is high, which may lead to bias in the results, we explored the source of heterogeneity through subgroup and sensitivity analyses, providing a good evidence-based basis for clinical practice. The heterogeneity of anxiety and depression was explored by subgroup analysis, with anxiety due to music duration and music cycle; and depression due to intervention cycles and music duration. Sensitivity analyses also identified music duration and music cycle as contributing to the heterogeneity. Also, this study has some limitations since the included literature did not take into account the duration of the disease, education, and family economic status and did not categorize the age stages. This study found that music therapy improves anxiety and depression in breast cancer patients and the results can be used as a basis for clinical practice and researcher enquiry. This research has been registered on the INPLASY platform ( https://inplasy.com/contact/ ) under the number: INPLASY2023100057.
Subject(s)
Anxiety , Breast Neoplasms , Depression , Music Therapy , Humans , Music Therapy/methods , Breast Neoplasms/psychology , Breast Neoplasms/therapy , Breast Neoplasms/complications , Anxiety/therapy , Female , Depression/therapy , Middle Aged , Randomized Controlled Trials as Topic , Adult , Aged , Treatment OutcomeABSTRACT
Monozygotic (MZ) twins cannot be distinguished using conventional forensic STR typing because they present identical STR genotypings. However, MZ twins do not always live in the same environment and often have different dietary and other lifestyle habits. Metabolic profiles are deyermined by individual characteristics and are also influenced by the environment in which they live. Therefore, they are potential markers capable of identifying MZ twins. Moreover, the production of proteins varies from organism to organism and is influenced by both the physiological state of the body and the external environment. Hence, we used metabolomics and proteomics to identify metabolites and proteins in peripheral blood to discriminate MZ twins. We identified 1749 known metabolites and 622 proteins in proteomic analysis. The metabolic profiles of four pairs of MZ twins revealed minor differences in intra-MZ twins and major differences in inter-MZ twins. Each pair of MZ twins exhibited distinct characteristics, and four metabolites-methyl picolinate, acesulfame, paraxanthine, and phenylbenzimidazole sulfonic acid-were observed in all four MZ twin pairs. These four differential exogenous metabolites conincidently show that the different external environments and life styles can be well distinguished by metabolites, considering that twins do not all have the same eating habits and living environments. Moreover, MZ twins showed different protein profiles in serum but not in whole blood. Thus, our results indicate that differential metabolites provide potential biomarkers for the personal identification of MZ twins in forensic medicine.
ABSTRACT
Aqueous Zn batteries are promising for large-scale energy storage but are plagued by the lack of high-performance cathode materials that enable high specific capacity, ultrafast charging, and outstanding cycling stability. Here, a laser-scribed nano-vanadium oxide (LNVO) cathode is designed that can simultaneously achieve these properties. The material stores charge through Faradaic redox reactions on/near the surface at fast rates owing to the small grain size of vanadium oxide and interpenetrating 3D graphene network, displaying a surface-controlled capacity contribution (90%-98%). Multiple characterization techniques unambiguously reveal that zinc and hydronium ions co-insert with minimal lattice change upon cycling. It is demonstrated that a high specific capacity of 553 mAh g-1 is achieved at 0.1 A g-1, and an impressive 264 mAh g-1 capacity is retained at 100 A g-1 within 10 s, showing excellent rate capability. The LNVO/Zn can also reach >90% capacity retention after 3000 cycles at a high rate of 30 A g-1, as well as achieving both high energy (369 Wh kg-1) and power densities (56306 W kg-1). Moreover, the LNVO cathode retains its excellent cycling performance when integrated into quasi-solid-state pouch cells, further demonstrating mechanical stability and its potential for practical application in wearable and grid-scale applications.
ABSTRACT
Revitalizing metal anodes for rechargeable batteries confronts challenges such as dendrite formation, limited cyclicity, and suboptimal energy density. Despite various efforts, a practical fabrication method for dendrite-free metal anodes remains unavailable. Herein, focusing on Li as exemplar, a general strategy is reported to enhance reversibility of the metal anodes by forming alloyed metals, which is achieved by induction heating of 3D substrate, lithiophilic metals, and Li within tens of seconds. It is demonstrated that preferred alloying interactions between substrates and lithiophilic metals created a lithiophilic metal-rich region adjacent to the substrate, serving as ultrastable lithiophilic host to guide dendrite-free deposition, particularly during prolonged high-capacity cycling. Simultaneously, an alloying between lithiophilic metals and Li creates a Li-rich region adjacent to electrolyte that reduces nucleation overpotential and constitutes favorable electrolyte-Li interface. The resultant composite Li anodes paired with high areal loading LiNi0.8Co0.1Mn0.1O2 cathodes achieve superior cycling stability and remarkable energy density above 1200 Wh L-1 (excluding packaging). Furthermore, this approach shows broader applicability to other metal anodes plagued by dendrite-related challenges, such as Na and Zn. Overall, this work paves the way for development of commercially viable metal-based batteries that offer a combination of safety, high energy density, and durability.
ABSTRACT
Silicon microparticles (SiMPs) have gained significant attention as a lithium-ion battery anode material due to their 10 times higher theoretical capacity compared to conventional graphite anodes as well as their much lower production cost than silicon nanoparticles (SiNPs). However, SiMPs have suffered from poorer cycle life relative to SiNPs because their larger size makes them more susceptible to volume changes during charging and discharging. Creating a wrapping structure in which SiMPs are enveloped by carbon layers has proven to be an effective strategy to significantly improve the cycling performance of SiMPs. However, the synthesis processes are complex and time-/energy-consuming and therefore not scalable. In this study, a wrapping structure is created by using a simple, rapid, and scalable "modified reprecipitation method". Graphene oxide (GO) and SiMP dispersion in tetrahydrofuran is injected into n-hexane, in which GO and SiMP by themselves cannot disperse. GO and SiMP therefore aggregate and precipitate immediately after injection to form a wrapping structure. The resulting SiMP/GO film is laser scribed to reduce GO to a laser-scribed graphene (LSG). Simultaneously, SiOx and SiC protection layers form on the SiMPs through the laser process, which alleviates severe volume change. Owing to these desirable characteristics, the modified reprecipitation method successfully doubles the cycle life of SiMP/graphene composites compared to the simple physically mixing method (50.2% vs. 24.0% retention at the 100th cycle). The modified reprecipitation method opens a new synthetic strategy for SiMP/carbon composites.
ABSTRACT
Working on a moving platform can significantly impede human performance. Previous studies on moving vehicles have often focused on the overall impact on general task performance, whereas our study's emphasis is on precise hand movements, exploring the interaction between body motion and the escalation of task difficulty. We recruited 28 participants to engage in reciprocal aiming tasks, following Paul Fitts's setting, under both in-motion and stationary conditions. The task index of difficulty (ID) was manipulated by varying the width of the targets and the distance between the targets. We measured participants' movement time (MT), performance errors, and monitored their eye movements using an eye-tracking device, heart rate (HR), and respiration rate (RR) during the tasks. The measured parameters were compared across two experimental conditions and three ID levels. Compared to the stationary conditions, the in-motion conditions degraded human aiming performance, resulting in significantly prolonged MT, increased errors, and longer durations of eye fixations and saccades. Furthermore, HR and RR increased under the in-motion conditions. Linear relationships between MT and ID exhibited steeper slopes under the in-motion conditions compared to the stationary conditions. This study builds a foundation for us to explore the control mechanisms of individuals working in dynamic and demanding environments, such as pilots in airplanes and paramedics in ambulances.
Subject(s)
Eye-Tracking Technology , Movement , Humans , Motion , Movement/physiology , Eye Movements , Upper ExtremityABSTRACT
Silicon has gained significant attention as a lithium-ion battery anode material due to its high theoretical capacity compared to conventional graphite. Unfortunately, silicon anodes suffer from poor cycling performance caused by their extreme volume change during lithiation and de-lithiation. Compositing silicon particles with 2D carbon materials, such as graphene, can help mitigate this problem. However, an unaddressed challenge remains: a simple, inexpensive synthesis of Si/graphene composites. Here, a one-step laser-scribing method is proposed as a straightforward, rapid (≈3 min), scalable, and less-energy-consuming (≈5 W for a few minutes under air) process to prepare Si/laser-scribed graphene (LSG) composites. In this research, two types of Si particles, Si nanoparticles (SiNPs) and Si microparticles (SiMPs), are used. The rate performance is improved after laser scribing: SiNP/LSG retains 827.6 mAh g-1 at 2.0 A gSi+C -1, while SiNP/GO (before laser scribing) retains only 463.8 mAh g-1. This can be attributed to the fast ion transport within the well-exfoliated 3D graphene network formed by laser scribing. The cyclability is also improved: SiNP/LSG retains 88.3% capacity after 100 cycles at 2.0 A gSi+C -1, while SiNP/GO retains only 57.0%. The same trend is found for SiMPs: the SiMP/LSG shows better rate and cycling performance than SiMP/GO composites.
ABSTRACT
Species identification of biological specimens can provide the valuable clues and accelerate the speed of prosecution material processing for forensic investigation, especially when the case scene is inaccessible and the physical evidence is cumbersome. Thus, establishing a rapid, simple, and field-adapted species identification method is crucial for forensic scientists, particularly as first-line technology at the crime scene for initial rapid screening. In this study, we established a new field-adapted species identification method by combining multiplex multienzyme isothermal rapid amplification (MIRA), lateral flow dipstick (LFD) system, and universal primers. Universal primers targeting COX I and COX II genes were used in multiplex MIRA-LFD system for seven species identification, and a dedicated MIRA-LFD system primer targeting CYT B gene was used to detect the human material. DNA extraction was performed by collecting DNA directly from the centrifuged supernatant. Our study found that the entire amplification process took only 15 min at 37 °C and the results of LFDs could be visually observed after 10 min. The detection sensitivity of human material could reach 10 pg, which is equivalent to the detection of single cell. Different common animal samples mixed at the ratio of 1 ng:1 ng, 10 ng:1 ng, and 1 ng:10 ng could be detected successfully. Furthermore, the damaged and degraded samples could also be detected. Therefore, the convenient, feasible, and rapid approach for species identification is suitable for popularization as first-line technology at the crime scene for initial rapid screening and provides a great convenient for forensic application.
Subject(s)
DNA , Nucleic Acid Amplification Techniques , Animals , Humans , Nucleic Acid Amplification Techniques/methods , Sensitivity and Specificity , DNA Primers/genetics , Polymerase Chain Reaction/methodsABSTRACT
Electrodeposition of lithium (Li) metal is critical for high-energy batteries1. However, the simultaneous formation of a surface corrosion film termed the solid electrolyte interphase (SEI)2 complicates the deposition process, which underpins our poor understanding of Li metal electrodeposition. Here we decouple these two intertwined processes by outpacing SEI formation at ultrafast deposition current densities3 while also avoiding mass transport limitations. By using cryogenic electron microscopy4-7, we discover the intrinsic deposition morphology of metallic Li to be that of a rhombic dodecahedron, which is surprisingly independent of electrolyte chemistry or current collector substrate. In a coin cell architecture, these rhombic dodecahedra exhibit near point-contact connectivity with the current collector, which can accelerate inactive Li formation8. We propose a pulse-current protocol that overcomes this failure mode by leveraging Li rhombic dodecahedra as nucleation seeds, enabling the subsequent growth of dense Li that improves battery performance compared with a baseline. While Li deposition and SEI formation have always been tightly linked in past studies, our experimental approach enables new opportunities to fundamentally understand these processes decoupled from each other and bring about new insights to engineer better batteries.
ABSTRACT
Differentiating between monozygotic (MZ) twins remains difficult because they have the same genetic makeup. Applying the traditional STR genotyping approach cannot differentiate one from the other. Heteroplasmy refers to the presence of two or more different mtDNA copies within a single cell and this phenomenon is common in humans. The levels of heteroplasmy cannot change dramatically during transmission in the female germ line but increase or decrease during germ-line transmission and in somatic tissues during life. As massively parallel sequencing (MPS) technology has advanced, it has shown the extraordinary quantity of mtDNA heteroplasmy in humans. In this study, a probe hybridization technique was used to obtain mtDNA and then MPS was performed with an average sequencing depth of above 4000. The results showed us that all ten pairs of MZ twins were clearly differentiated with the minor heteroplasmy threshold at 1.0%, 0.5%, and 0.1%, respectively. Finally, we used a probe that targeted mtDNA to boost sequencing depth without interfering with nuclear DNA and this technique can be used in forensic genetics to differentiate the MZ twins.
Subject(s)
DNA, Mitochondrial , Genome, Mitochondrial , Female , Humans , DNA, Mitochondrial/genetics , Heteroplasmy , High-Throughput Nucleotide Sequencing , Sequence Analysis, DNA , Twins, Monozygotic/geneticsABSTRACT
In this work, we report the electrochemical reactivity of MoTe2 for various metal ions with special emphasis on Al3+ ion storage in aqueous electrolytes for the first time. A stable discharge capacity of 100 mA h g-1 over 250 cycles at a current density of 1 Ag-1 could be obtained for the Al3+ ion, whereas inferior storage capacities were shown for other metal ions.
ABSTRACT
As the soaring demand for energy storage continues to grow, batteries that can cope with extreme conditions are highly desired. Yet, existing battery materials are limited by weak mechanical properties and freeze-vulnerability, prohibiting safe energy storage in devices that are exposed to low temperature and unusual mechanical impacts. Herein, a fabrication method harnessing the synergistic effect of co-nonsolvency and "salting-out" that can produce poly(vinyl alcohol) hydrogel electrolytes with unique open-cell porous structures, composed of strongly aggregated polymer chains, and containing disrupted hydrogen bonds among free water molecules, is introduced. The hydrogel electrolyte simultaneously combines high strength (tensile strength 15.6 MPa), freeze-tolerance (< -77 °C), high mass transport (10× lower overpotential), and dendrite and parasitic reactions suppression for stable performance (30 000 cycles). The high generality of this method is further demonstrated with poly(N-isopropylacrylamide) and poly(N-tertbutylacrylamide-co-acrylamide) hydrogels. This work takes a further step toward flexible battery development for harsh environments.
ABSTRACT
Advancements in energy storage technologies such as Li-based batteries depend on a deep understanding of the chemical and structural aspects of critical interfaces. Among these, the solid electrolyte interphase (SEI) governs how batteries operate yet remains one of the most elusive to characterize due to its rapid degradation under an electron beam and sensitivity to ambient conditions. In recent years, cryogenic electron microscopy (cryo-EM) has emerged as a promising technique to provide atomic-resolution imaging of beam-sensitive battery materials. Distinct SEIs have been discovered with unique chemical compositions and structural features. In this perspective, the role of cryo-EM in uncovering the physicochemical properties of three classes of SEIs (i.e., compact, extended, and indirect SEI) will be defined and discussed. Furthermore, an in-depth analysis of new cryo-EM imaging modalities will be provided to highlight directions for the future development of cryo-EM.
ABSTRACT
Fast-charging is considered as one of the most desired features needed for lithium-ion batteries to accelerate the mainstream adoption of electric vehicles. However, current battery charging protocols mainly consist of conservative rate steps to avoid potential hazardous lithium plating and its associated parasitic reactions. A highly sensitive onboard detection method could enable battery fast-charging without reaching the lithium plating regime. Here, we demonstrate a novel differential pressure sensing method to precisely detect the lithium plating event. By measuring the real-time change of cell pressure per unit of charge (dP/dQ) and comparing it with the threshold defined by the maximum of dP/dQ during lithium-ion intercalation into the negative electrode, the onset of lithium plating before its extensive growth can be detected with high precision. In addition, we show that by integrating this differential pressure sensing into the battery management system (BMS), a dynamic self-regulated charging protocol can be realized to effectively extinguish the lithium plating triggered by low temperature (0 °C) while the conventional static charging protocol leads to catastrophic lithium plating at the same condition. We propose that differential pressure sensing could serve as an early nondestructive diagnosis method to guide the development of fast-charging battery technologies.