Genetically Engineered Membrane-Coated Nanoparticles for Enhanced Prostate-Specific Membrane Antigen Targeting and Ferroptosis Treatment of Castration-Resistant Prostate Cancer.

Conventional androgen deprivation therapy (ADT) targets the androgen receptor (AR) inhibiting prostate cancer (PCa) progression; however, it can eventually lead to recurrence as castration-resistant PCa (CRPC), which has high mortality rates and lacks effective treatment modalities. The study confirms the presence of high glutathione peroxidase 4 (GPX4) expression, a key regulator of ferroptosis (i.e., iron-dependent program cell death) in CRPC cells. Therefore, inducing ferroptosis in CRPC cells might be an effective therapeutic modality for CRPC. However, nonspecific uptake of ferroptosis inducers can result in undesirable cytotoxicity in major organs. Thus, to precisely induce ferroptosis in CRPC cells, a genetic engineering strategy is proposed to embed a prostate-specific membrane antigen (PSMA)-targeting antibody fragment (gy1) in the macrophage membrane, which is then coated onto mesoporous polydopamine (MPDA) nanoparticles to produce a biomimetic nanoplatform. The results indicate that the membrane-coated nanoparticles (MNPs) exhibit high specificity and affinity toward CRPC cells. On further encapsulation with the ferroptosis inducers RSL3 and iron ions, MPDA/Fe/RSL3@M-gy1 demonstrates superior synergistic effects in highly targeted ferroptosis therapy eliciting significant therapeutic efficacy against CRPC tumor growth and bone metastasis without increased cytotoxicity. In conclusion, a new therapeutic strategy is reported for the PSMA-specific, CRPC-targeting platform for ferroptosis induction with increased efficacy and safety.

A novel robust hydrogel-assisted paper-based sensor based on fluorescence UiO-66-NH2@ZIF-8 for the dual-channel detection of captopril.

Captopril (CP) is commonly used as an active enzyme inhibitor for the treatment of coronary heart disease, hypertension and angina pectoris. The development of sensitive and efficient method for CP analysis is of great importance in biomedical research. Herein, we fabricated a sensitive and robust hydrogel-assisted paper-based sensor based on fluorescence UiO-66-NH2@ZIF-8 and Co, N-doped carbon nanozymes with oxidase-mimicking activity for accurate monitoring of captopril. The hydrogel-assisted paper-based sensor appeared a visible pink signal due to the catalytic oxidation of colorless N,N-diethyl-p-phenylenediamine (DPD) to oxDPD by Co, N-doped carbon-based nanozymes, and resulted in the fluorescence quenching of UiO-66-NH2@ZIF-8. In the presence of captopril, the oxidation of chromogenic substrate DPD by Co, N-doped nanozymes in the hydrogel-assisted paper-based sensor was hindered and accompanied by a change in the visible color, leading to recovery of the fluorescence of UiO-66-NH2@ZIF-8, and the change in the fluorescence color could also be observed. Therefore, the quantitative detection of captopril is achieved by taking a smartphone photograph and converting the image parameters into data information using ImageJ software. The portable hydrogel-assisted paper sensor provided sensitive detection of captopril in two modes based on visible color change as well as fluorescence color change with limits of detection of 0.45 µM and 0.47 µM, respectively. This hydrogel-assisted paper-based sensor has been successfully applied to the accurate monitoring of captopril in human serum, providing a potential avenue for in situ detection of captopril.

Photonic-assisted high-order vector millimeter-wave signal generation enabled by DSM.

We propose an optical dual-single-sideband (dual-SSB) modulated 16384-quadrature amplitude modulation (QAM) photonic vector millimeter-wave (mm-wave) signal generation scheme based on delta-sigma modulation (DSM). With the aid of the DSM, the severe nonlinear distortion of envelope detection for high-order QAM modulation signals in wireless communication can be effectively resolved. For the validation of our proposed scheme, we experimentally demonstrate the generation of a 40 GHz 16384-QAM orthogonal frequency division multiplexing (OFDM) photonic vector mm-wave signal and transmission over a 25-km standard single-mode fiber (SSMF), and a 1-m wireless link with the bit error ratio (BER) reaches the hard-decision forward-error-correction (HD-FEC) threshold of 3.8 × 10-3.

Macrophage-Derived Nanosponges Adsorb Cytokines and Modulate Macrophage Polarization for Renal Cell Carcinoma Immunotherapy.

Renal cell carcinoma (RCC) is a hot tumor infiltrated by large numbers of CD8+ T cells and is highly sensitive to immunotherapy. However, tumor-associated macrophages (TAMs), mainly M2 macrophages, tend to undermine the efficacy of immunotherapy and promote the progression of RCC. Here, macrophage-derived nanosponges are fabricated by M2 macrophage membrane-coated poly（lactic-co-glycolic acid）（PLGA）, which could chemotaxis to the CXC and CC chemokine subfamily-enriched RCC microenvironment via corresponding membrane chemokine receptors. Subsequently, the nanosponges act like cytokine decoys to adsorb and neutralize broad-spectrum immunosuppressive cytokines such as colony stimulating factor-1(CSF-1), transforming growth factor-ß（TGF-ß）, and Lnterleukin-10（IL-10）, thereby reversing the polarization of M2-TAMs toward the pro-inflammatory M1 phenotype, and enhancing the anti-tumor effect of CD8+ T cells. To further enhance the polarization reprogramming efficiency of TAMs, DSPE-PEG-M2pep is conjugated on the surface of macrophage-derived nanosponges for specific recognition of M2-TAMs, and the toll like receptors 7/8（TLR7/8） agonist, R848, is encapsulated in these nanosponges to induce M1 polarization, which result in significant efficacy against RCC. In addition, these nanosponges exhibit undetectable biotoxicity, making them suitable for clinical applications. In summary, a promising and facile strategy is provided for immunomodulatory therapies, which are expected to be used in the treatment of tumors, autoimmune diseases, and inflammatory diseases.

Relationship between myopia control and amount of corneal refractive change after orthokeratology lens treatment.

BACKGROUND: To evaluate the relationship between amount of corneal refractive change (CRC) after wearing orthokeratology (Ortho-K) lenses and axial length (AL) growth. METHODS: We retrospectively enrolled 77 patients (77 eyes) aged 8-14 years who wore Ortho-K lenses more than 12 months. We divided the patients into 2 subgroups: spherical equivalent (SE) ≤ -3.0 D and SE > -3.0 D subgroup. The sagittal and tangential curvature maps and corneal topographic data within the 8-mm diameter ring at the baseline and during follow-up visits after wearing Ortho-K lens were recorded in addition to the area, height, and volume of the CRC region. The AL data were recorded at the baseline and during follow-up visits. Multivariate linear regression was conducted to analyze associations between the area, height, and volume of the CRC region, AL elongation, and SE. RESULTS: The average change in the CRC region was 9.77 ± 0.60 D in height, 16.66 ± 3.61 mm2 in area, and 87.47 ± 8.96 D*mm2 in volume on the tangential diagram after wearing Ortho-K lenses for 3 months. The AL showed a change of 0.19 ± 0.14 mm after 1 year of Ortho-K lens wear (P < 0.05). At 1 year, AL elongation was negatively correlated with the area (P = 0.019) and volume (P < 0.001) of the CRC region. At 1 year, for every 1-mm2 increase in the area and every 1-D*mm2 increase in the volume of the CRC region, the average AL elongation decreased by 0.01 mm and 0.002 mm, respectively, in the multivariate analysis. In patients with SE ≤ -3.0 D, AL elongation was negatively correlated with the CRC-region volume (ß = -0.002, P = 0.018), and in patients with SE > -3.0 D, AL elongation was negatively correlated with the CRC-region area (ß = -0.017, P = 0.016). CONCLUSIONS: The AL elongation-control efficacy of Ortho-K lenses may be related to the area and volume of the CRC region.

The Relationship between Axis Length Difference and Refractive Error in Unilateral Myopic Anisometropic Children Treated with Orthokeratology.

Purpose: To explore the correlation between the axial length (AL) difference (myopic and nonmyopic eye) and the refractive error in children with unilateral myopia anisometropia (UMA) and to elucidate its clinical application in the process of Ortho-K lenses review following nonstop wearing. Methods: This study retrospectively analyzed the data of 70 children with UMA (age, 8-15 years) whose myopic eyes were treated with Ortho-K lenses. The spherical equivalent refractive errors (SERE) of the myopic eye ranged from -0.75 D to -4.25 D, and astigmatism was no less than -1.50 D. In addition, SERE of nonmyopic eyes were no less than -0.50 D. AL, and the refractive data of both eyes were measured at baseline. A multivariate linear regression was used to analyze the relationship between the AL difference and refractive error, and paired t-test was used to analyze the changes in AL in both eyes. Results: Every 1 mm axial length change corresponds to -1.627 D (95% CI: -1.921 D, -1.333 D; P < 0.001) change in refractive error in children. The association between the AL change and the degree of myopia did not change with age (P=0.751). Among the 70 subjects, 51 (72.86%) had myopia in the right eye, and the 95% confidence interval (CI) for myopia occurring in the right eye was 62.4%-83.3%. The paired t-test showed that the average AL growth was significantly slower in myopic eyes treated with Ortho-K lenses than in nonmyopic eyes (t = 9.805, P < 0.001). Conclusion: Every 1 mm AL change would cause an average refractive error increase. Age did not influence the association between AL changes and the degree of myopia. The right eye is more likely to be affected in children with UMA. The Ortho-K lens treatment slowed down the growth of AL in the myopic eye in children with UMA.

[IgG78-DM1 inhibits pulmonary fibrosis by targeting and killing CD248-positive myofibroblasts in mice].

Objective To investigate the therapeutic effect of targeting and killing CD248-positive myofibroblasts on bleomycin-induced pulmonary fibrosis in mice. Methods IgG78-DM1, an antibody-maytansine 1 (DM1) conjugate targeting CD248, was prepared. The drug conjugation efficiency was measured and calculated by UV spectrophotometer, and the identification of IgG78-DM1 was performed through SDS-PAGE and Western blot analysis. In vitro, the binding activity of IgG78-DM1 on CD248-positive myofibroblasts was detected by flow cytometry and the cytotoxicity of IgG78-DM1 to CD248-positive myofibroblasts was evaluated by CCK-8 assay. In vivo, C57BL/6 male mice were randomly divided into control group, idiopathic pulmonary fibrosis group, human IgG-DM1 (hIgG-DM1) control group, and IgG78-DM1 treatment group. Then, the mouse models with pulmonary fibrosis induced by bleomycin were constructed. Two weeks later, the animal models were intravenously injected with IgG78-DM1. After the treatment of two weeks, lung tissues were collected for Masson staining and Sirius Red staining to evaluate the degree of pulmonary fibrosis. Real-time fluorescence quantitative PCR was used to measure the expression levels of CD248, as well as markers of fibroblastic activation including alpha-smooth muscle actin (α-SMA) and type I collagen alpha 1 (COL1A1). The safety of IgG78-DM1 was preliminarily assessed by conducting liver and kidney function tests. Results IgG78-DM1 was successfully prepared, and its drug conjugation ratio was 3.2. The antibody structure remained stable after conjugation, allowing effective binding and cytotoxicity against CD248-positive myofibroblasts. After treatment with IgG78-DM1, the degree of pulmonary fibrosis in mice significantly reduced, accompanied by the decrease of the expression of CD248, α-SMA, and COL1A1. The liver and kidney function of the mice remained at normal levels compared to the normal control group. Conclusion IgG78-DM1 effectively inhibits pulmonary fibrosis in mice by targeting and killing CD248-positive myofibroblasts. The safety of this strategy is preliminarily assessed.

A sensing platform for on-site detection of glutathione S-transferase using oxidized Pi@Ce-doped Zr-based metal-organic frameworks(MOFs).

The development of point-of-care testing (POCT) for glutathione S-transferase (GST) is an effective way to establish the mechanism of targeted monitoring of cancer chemotherapy drug metabolism. Assays for GST with high sensitivity as well as on-site screening have been urgently required to monitor this process. Herein, we synthesized oxidized Pi@Ce-doped Zr-based metal-organic frameworks (MOFs) by electrostatic self-assembly between phosphate and oxidized Ce-doped Zr-based MOFs. It was found that the oxidase-like activity of oxidized Pi@Ce-doped Zr-based MOFs was substantially increased after phosphate ion (Pi) assembly. And a stimulus-responsive hydrogel-based kit was constructed by embedding oxidized Pi@Ce-doped Zr-based MOFs into a PVA (polyvinyl alcohol) hydrogel system, we integrated a portable hydrogel kit with a smartphone for real-time monitoring of GST for quantitative and accurate analysis. The color reaction was triggered based on oxidized Pi@Ce-doped Zr-based MOFs with 3,3',5,5'-tetramethylbenzidine (TMB). However, in the presence of glutathione (GSH), the above color reaction was hindered due to the reducibility of GSH. Catalyzed by GST, GSH can react with 1-chloro-2,4-dinitrobenzo (CDNB) to form an adduct, which caused the color reaction to occur again, resulting in the color response of the kit. In combination with ImageJ software, the kit image information acquired by smartphone could be converted into hue intensity, providing a direct quantitative tool for the detection of GST with a detection limit of 0.19mU·L-1. Based on the advantages of simple operation and cost-effectiveness, the introduction of the POCT miniaturized biosensor platform will meet the requirements of on-site quantitative analysis of GST.

Single-cell analysis reveals the COL11A1+ fibroblasts are cancer-specific fibroblasts that promote tumor progression.

Background: Cancer-associated fibroblasts (CAFs) promote tumor progression through extracellular matrix (ECM) remodeling and extensive communication with other cells in tumor microenvironment. However, most CAF-targeting strategies failed in clinical trials due to the heterogeneity of CAFs. Hence, we aimed to identify the cluster of tumor-promoting CAFs, elucidate their function and determine their specific membrane markers to ensure precise targeting. Methods: We integrated multiple single-cell RNA sequencing (scRNA-seq) datasets across different tumors and adjacent normal tissues to identify the tumor-promoting CAF cluster. We analyzed the origin of these CAFs by pseudotime analysis, and tried to elucidate the function of these CAFs by gene regulatory network analysis and cell-cell communication analysis. We also performed cell-type deconvolution analysis to examine the association between the proportion of these CAFs and patients' prognosis in TCGA cancer cohorts, and validated that through IHC staining in clinical tumor tissues. In addition, we analyzed the membrane molecules in different fibroblast clusters, trying to identify the membrane molecules that were specifically expressed on these CAFs. Results: We found that COL11A1+ fibroblasts specifically exist in tumor tissues but not in normal tissues and named them cancer-specific fibroblasts (CSFs). We revealed that these CSFs were transformed from normal fibroblasts. CSFs represented a more activated CAF cluster and may promote tumor progression through the regulation on ECM remodeling and antitumor immune responses. High CSF proportion was associated with poor prognosis in bladder cancer (BCa) and lung adenocarcinoma (LUAD), and IHC staining of COL11A1 confirmed their specific expression in tumor stroma in clinical BCa samples. We also identified that CSFs specifically express the membrane molecules LRRC15, ITGA11, SPHK1 and FAP, which could distinguish CSFs from other fibroblasts. Conclusion: We identified that CSFs is a tumor specific cluster of fibroblasts, which are in active state, may promote tumor progression through the regulation on ECM remodeling and antitumor immune responses. Membrane molecules LRRC15, ITGA11, SPHK1 and FAP could be used as therapeutic targets for CSF-targeting cancer treatment.

Multistage interfacial engineering of 3D carbonaceous Ni2P nanospheres/nanoflowers derived from Ni-BTC metal-organic frameworks for overall water splitting.

The regulation of the multi-dimensional interface plays an important role in optimizing the electron transport and gas mass transfer during catalysis, which is conducive to promoting the electrocatalytic process. Herein, a self-supporting electrode has been developed with the multistage interface within 3D Ni2P@C nanospheres/nanoflowers arrays derived from metal-organic frameworks (MOFs) as template skeletons and precursors. The constructed nanosphere interface protrudes outward to optimize the contact with the electrolyte while the nanoflower lamellar connection promotes rapid electron transfer and exposes more active sites, and accelerates the gas diffusion with the abundant interspace channels. According to theoretical calculation, the synergistic effect between Ni2P and C is conducive to the optimal adsorption and desorption of H*, thus contributing to the improvement of catalytic kinetics. With the optimized growth times assembled onto nickel foam substrates, the Ni2P@C-12 h requires overpotentials of only 69 mV and 205 mV to drive the current density of 10 mA cm-2 towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. And it reveals an ultralow cell voltage of 1.55 V at 10 mA cm-2 to achieve overall water splitting (OWS). In addition, the stability of the Ni2P@C/NF electrocatalyst emerges as prominent long-term stability, which is attributed to the carbonaceous nanosphere anchors on the substrate to minimize the possibility of oxidation of the catalyst surface. This strategy of in situ growth of MOF-derived phosphates provides a general idea for interfacial engineering modification of OWS electrode materials.

Engineering of the Core-Shell Boron Nitride@Nitrogen-Doped Carbon Heterogeneous Interface for Efficient Heat Dissipation and Electromagnetic Wave Absorption.

The effective integration of multiple functions into electromagnetic wave-absorbing (EWA) materials is the future development direction but remains a huge challenge. A rational selection of components and the design of structures can make the material have excellent EWA performance and heat dissipation. Herein, the core-shell structured boron nitride@nitrogen-doped carbon (BN@NC) is prepared by using waterborne polyurethane (WPU) as the carbon source via a facile pyrolysis treatment process, where NC is used as the conductive loss shell, and BN serves as an impedance matching core and dominant heat transfer media. As a result, the BN@NC-900 filled with paraffin wax yields a minimum reflection loss of -42.2 dB at 2.2 mm and an effective absorbing bandwidth of 4.48 GHz at 1.8 mm, and its thermal conductivity reaches up to 0.92 W/m·K in epoxy resin. Most importantly, flexible BN@NC/WPU films are prepared and simultaneously achieve the dual-functional capability of efficiently dissipating heat and electromagnetic waves (-50.0 dB). Besides, an attractive multiband absorption feature (>99%) from C to Ku bands is realized and a strong absorbing over -27.0 dB at the S band (2.88 GHz) is even achieved. This study may pave a new route for the rational design of multifunctional EWA materials.

Digital mobile fronthaul based on delta-sigma modulation employing a simple self-coherent receiver.

The coherent digital radio-over-fiber (DRoF) system is a promising candidate for future mobile fronthaul networks (MFNs) due to its high receiver sensitivity and excellent robustness against nonlinearities. However, conventional coherent receivers with complicated structure and heavy algorithms are too expensive and power-hungry for cost-sensitive MFN applications. In addition, currently deployed digital MFNs based on common public radio interface (CPRI) suffer from low spectral efficiency and high data rate. Towards these issues we propose a novel DRoF downlink scheme employing a simple self-coherent receiver. In baseband unit (BBU), the radio signal is converted to a digital bit stream by a band-pass delta-sigma modulator (BP-DSM), which can be simply recovered with the utilization of a band-pass filter at the receiver. In remote radio unit (RRU), an electro-absorption modulated laser (EML) acts as a low-cost coherent homodyne receiver in virtue of injection locking technique. In the experiment, the injection-locked operation of the DSM signal is successfully achieved, and two modified schemes are proposed for the DSM signal to increase the locking range with a tolerable sensitivity penalty. The experimental results demonstrate the superiority of our approach in two aspects: 1) the EML-based coherent receiver outperforms a PIN photodiode in terms of receiver sensitivity; 2) compared to the analog RoF system, a 5-dB improvement in loss budget is obtained when DSM is employed with the aid of a simple equalizer.

Clinical effect of rigid gas permeable (RGP) contact lens in improving vision and controlling myopia progression of unilateral high myopic children.

BACKGROUND: The aim of this study was to explore the clinical effect of the RGP contact lens in improving vision and controlling myopia progression of the unilateral high myopic children. METHODS: In this retrospective analysis case series study, we analyzed the clinical data for 23 subjects with unilateral high myopic children under 6 years old, with the spherical equivalent refractive error of the myopic eye from -5.0 D to -12.0 D, who were enrolled from the outpatient clinic at Beijing Tongren Hospital, China. Fourteen subjects could successfully fit the RGP contact lens, and nine subjects used the spectacle lens. Complete ocular examination was performed at the first visit at the clinic and every three months during the follow-up period. RESULTS: In the RGP group, the change of axial length (AL) of the high myopic eye was from 25.62 ± 1.31 mm to 25.69 ± 1.31 mm after 12 months. The change of spherical equivalent (SE) was from -8.73 ± 2.54 D to -8.48 ± 2.77 D. The best corrected visual acuity (BCVA) improved from 0.24 ± 0.18 to 0.78 ± 0.26. In the spectacle group, the change of AL was from 24.76 ± 0.56 mm to 24.94 ± 0.71 mm. The change of SE was from -6.16 ± 2.86 D to -9.45 ± 2.06 D. The improvement of BCVA was from 0.52 ± 0.15 to 0.72 ± 0.23. CONCLUSIONS: Wearing RGP lens in the children with unilateral high myopia is a safe, convenient and effective method to improve the best corrected vision and controlling myopia progression.

Mechanical Property of Long Glass Fiber Reinforced Polypropylene Composite: From Material to Car Seat Frame and Bumper Beam.

Long Fiber Reinforced Thermoplastic (LFT) is a lightweight, high-strength, and easy-to-recycle new vehicle composite material, and has good mechanical properties, heat resistance, and weather resistance, which has found increasing application in automobile industry. It is of importance to understand the relationship between micro phase, macro-mechanical properties and the structural performance of automobile components. This article evaluates the performance of LFT from the level of material to automobile components. The mechanical properties of LFT were numerically and theoretically predicted to provide instruction for the next material choice. Two typical structural components, namely, car seat frame and bumper beam, were selected to evaluate the performance of LGF/PP compared with other competing materials in terms of mechanical properties and cost. In the case of the same volume, the seat frame of 40% LECT/PP composite material is lighter and cheaper, which is conducive to energy saving and emission reduction. It was shown that the 40% LECT/PA66 car bumper beam had a higher energy absorption ratio, lighter weight, higher specific energy absorption, and advantageous material cost. LFT is a promising candidate for existing automobile components with its performance fulfilling the requirements.

Epigenetic regulation of the DNMT1/MT1G/KLF4/CA9 axis synergises the anticancer effects of sorafenib in hepatocellular carcinoma.

Sorafenib, a multikinase inhibitor, has been widely used as a first-line anticancer drug for advanced hepatocellular carcinoma (HCC). However, the development of drug resistance to sorafenib is frequently observed in clinical applications. Potential nonkinase targets of sorafenib have not been well documented and may provide insights into reversing drug resistance and enhancing drug efficacy. Herein, we report that sorafenib exerts its anticancer effects by activating metallothionein 1 G (MT1G) expression. MT1G is a novel marker in HCC that correlates well with patient survival. MT1G overexpression suppressed the cellular proliferation, migration, invasion, and tumour formation of HCC and sensitised cells to sorafenib treatment. However, the disruption of MT1G attenuated the anticancer effects of sorafenib. Mechanistically, sorafenib upregulated MT1G expression via hypomethylation of its promoter region by binding and inhibiting DNA methyltransferase 1 (DNMT1) and increasing its promoter accessibility in HCC cells. Activation of MT1G also inhibited CA9 transcription through the suppression of HIF1A as mediated by KLF4. Our collective data revealed that sorafenib exerts its anticancer effects through epigenetic regulation of the DNMT1/MT1G/KLF4/CA9 axis in HCC and the activation of MT1G might constitute a strategy for enhancing the effect of sorafenib to suppress HCC cells.

Amino acid functionalized boron nitride nanosheets towards enhanced thermal and mechanical performance of epoxy composite.

HYPOTHESIS: The practical applications of boron nitride nanosheet (BNNS) are dramatically limited by the harsh exfoliation and surface functionalization conditions due to the hydrophobic and chemically inert nature. This issue can be improved by selecting efficient modifiers with hydrophilic groups. EXPERIMENTS: A green and scalable amino acid-assisted ball milling method is presented to exfoliate and functionalize BNNS simultaneously. The different interactions between BNNS and four amino acids (tryptophan (Trp), phenylalanine (Phe), arginine (Arg), lysine (Lys)) are thoroughly investigated to rationalize the thermal and mechanical properties of their corresponding epoxy (EP) composites. FINDING: Trp and Phe display higher functionalization degree and dispersibility of BNNS than Arg and Lys thanks to the additional π-π interactions between the aromatic groups and BNNS. Moreover, both BNNS-Trp/EP and BNNS-Phe/EP exhibit higher cross-plane thermal conductivity of 2.1 and 1.96 W m-1 K-1 at 30 wt% filler loading. In addition, the mechanical strengths of all these amino acids functionalized BNNS filled epoxy composites are significantly enhanced due to stronger interfacial interactions between fillers and epoxy matrix. Thus, this work paves the way for the facile mass production of functionalized BNNS and expedites their applications in thermal interface materials of electronic components.

SOA Amplified 100 Gb/s/λ PAM-4 TDM-PON Supporting PR-30 Power Budget with >18 dB Dynamic Range

Semiconductor optical amplifier (SOA) is considered an excellent candidate for power amplification at O-band due to its low cost and small footprint. In passive optical networks (PONs), SOA is popular as a booster and pre-amplifier to improve the link power budget. However, whether as a booster or pre-amplifier, SOA will induce different degrees of nonlinearity when the output power is high, which degrades the transmission performance of the system and leads to a limited receiver dynamic range. In this paper, we experimentally demonstrate the feasibility of using SOA in both transmitter and receiver sides for power budget improvement in 100 Gb/s/λ four-level pulsed amplitude modulation (PAM-4) time division multiplexed PON (TDM-PON) system at O-band. For compensating the linear and nonlinear impairments induced by transceivers and SOA, a look-up-table (LUT) pre-compensation at the optical line terminal (OLT) side and a simple feed-forward equalizer (FFE) at the optical network unit (ONU) side are adopted for downstream transmission. For upstream transmission, a 2nd-order Volterra nonlinear equalizer (VNLE) is utilized at the OLT side, and no pre-compensation is used at the transmitter of the ONU, which releases the digital signal processing (DSP) pressure of ONUs in a multi-user scenario. For the soft-decision FEC (SD-FEC) threshold (1 × 10−2), the IEEE PR-30 power budget requirement is met, and >18 dB dynamic range is achieved in both 25 km downstream and upstream transmission.

The effect of orthokeratology treatment zone decentration on myopia progression.

BACKGROUND: This study aimed to compare the changes in the axial length (AL) in myopic children that wear centered and decentered orthokeratology (Ortho-K). METHODS: This retrospective study included 217 subjects who were treated with an Ortho-K lens for >12 months. The subjects were divided into three groups based on the magnitude of the Ortho-K lens treatment zone decentration: mildly, moderately, and severely decentered groups. Distance and direction of treatment zone decentration were calculated using software that was developed in-house. The AL changes in different groups were compared. RESULTS: Based on the distance of the treatment zone decentration, 65 children (65 eyes) were included in the mildly decentered group, 114 children (114 eyes) in the moderately decentered group, and 38 children (38 eyes) in the severely decentered group. The mean decentration distance in the three groups was 0.35 ± 0.11 mm, 0.71 ± 0.13 mm, and 1.21 ± 0.22 mm, respectively. The mean AL increase in the three groups after 12 months of Ortho-K lens wear was 0.24 ± 0.21 mm, 0.23 ± 0.18 mm, and 0.19 ± 0.20 mm, respectively. There were no significant differences in AL changes among the three groups. CONCLUSIONS: Ortho-K lens decentration is common in clinical practice. The AL change after Ortho-K lens wear was not significantly different in subjects with different magnitudes of Ortho-K lens decentration. Fitting the Ortho-K lens in the properly centered zone is recommended to ensure the safety of Ortho-K lens wear and to maintain visual quality.

Occurrence and distribution of microplastics in water supply systems: In water and pipe scales.

Microplastic (MP) pollution has received widespread attention; however, its occurrence and distribution in water supply systems, particularly in pipe scales, remains unclear. In this study, MPs were observed in water and pipe scale samples from the drinking water treatment plant (DWTP) and distribution system (DWDS), respectively. The MP concentrations ranged from 13.23 to 134.79 n/L and 569.99 to 751.73 n/kg in the water and pipe scale samples, respectively. The predominant particles in the pipe scales (50-100 µm) were smaller than those in the water samples (> 200 µm). Overall, MP fragments were the most abundant. Of all the identified MPs, nylon and polyvinyl chloride were predominant in the water and pipe scale samples, respectively. Furthermore, the DWTP and DWDS both prevented MPs from entering the tap water, thereby reducing their risk. The results of this study provide direct evidence for the strong adsorption of MPs onto pipe scales, indicating that pipe scale stability may play a role in improving water quality and security. However, the abundance of MPs in pipe scales cannot be ignored. Additionally, the results provide valuable background information on MP pollution in water supply systems.

Demonstration of a 50G-PON with a 45-dB power budget using an IQ-interleaved coherent detection scheme.

The application of traditional coherent detection technology to optical access networks has been undermined due to its high complexity and high cost. In this paper, we propose a novel IQ-interleaved detection method which uses the preset frequency offset of the lasers at the transmitter and receiver to obtain the in-phase and quadrature components of the received signal. It keeps the simple structure of heterodyne detection and avoids the down-conversion process. Without Nyquist pulse shaping, the received signal bandwidth of the proposed scheme is theoretically 0.5B smaller than that of heterodyne detection for signal with a symbol rate of B. The 50-Gb/s NRZ transmission experiment proves that by using the proposed scheme, the receiving sensitivity and the frequency drift tolerance can be improved by ∼1 dB and 1 GHz compared with heterodyne detection under strong bandwidth limitation. Without pulse shaping, the receiving sensitivity, frequency drift tolerance (1-dB sensitivity penalty) and link power budget for 20-km fiber transmission are -31.8 dBm, 11 GHz and 43.5 dB, respectively. A higher power budget of 45 dB can be achieved when Nyquist pulse shaping is applied. The proposed scheme provides a low-complexity potential solution for a next-generation coherent PON.