Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 89
Filter
1.
Orthop Surg ; 2024 Jun 04.
Article in English | MEDLINE | ID: mdl-38837297

ABSTRACT

OBJECTIVE: Management of extensive acetabular bone defects in total hip arthroplasty (THA) remains challenging. This study aims to investigate the feasibility and preliminary outcomes of 3D-printed personalized porous acetabular components for the reconstruction of acetabular defects in primary THA. METHODS: This retrospective study involved seven patients who received 3D-printed acetabular components in primary THA between July 2018 and March 2021. Preoperatively, acetabular bone defects were evaluated by referencing the Paprosky classification. There were two "Paprosky type IIIA" defects and five "Paprosky type IIIB" defects. The acetabular components were custom-made for each patient to reconstruct the extensive acetabular defects. The hip function was assessed according to the Harris hip score (HHS). Clinical and radiographic outcomes were assessed. RESULTS: The average follow-up period was 40 months, ranging from 26 to 57 months. There were no patients lost to follow-up. The HHS improved from 44 (range: 33-53) before the operation to 88 (range: 79-93) at the final follow-up. Postoperative X-rays showed that the 3D-printed personalized components were properly fitted with the acetabulum. The average center of rotation (COR) discrepancy was 2.3 mm horizontally and 2.1 mm vertically, respectively. Tomosynthesis-Shimadzu metal artifact reduction technology images showed that the implant was in close contact with the host bone. Moreover, no complications were observed during the follow-up period, including loosening, dislocation, or component protrusion. CONCLUSION: The implantation of 3D-printed personalized acetabular components showed accurate reconstruction, stable mechanical support, and favorable function at short-term follow-up. This may be a viable alternative method for reconstructing extensive acetabular defects in THA.

2.
Article in English | MEDLINE | ID: mdl-38699944

ABSTRACT

OBJECTIVE: This study aimed to assess the correlation between the spontaneous nystagmus (SN) and the subjective visual vertical/horizontal (SVV/SVH) among patients with vestibular neuritis (VN) at the different head positions. STUDY DESIGN: Case-control study. SETTING: Affiliated Sixth People's Hospital, Shanghai Jiao Tong University School of Medicine. METHODS: This study evaluated the SVV/SVH in both healthy subjects and patients with VN. These evaluations were performed in 5 different head positions: upright, 45° tilt to the left, 90° tilt to the left, 45° tilt to the right, and 90° tilt to the right. Additionally, the intensity of SN, as measured by slow-phase velocity, was recorded. RESULTS: In patients with VN, a significant correlation was observed between SN and SVV/SVH in an upright position. The intensity of SN was higher when the head was tilted 90° toward the affected side compared to other positions. The SVV/SVH displayed an ipsiversive shift, when the head was tilted toward both the lesion and unaffected sides, exhibiting a contraversive direction. Furthermore, the changes in position-induced SN were consistent with the displacements of SVV and SVH caused by head tilt. CONCLUSION: The presence of SN in patients with VN was observed to vary across different head position. These variations could potentially be attributed to the diverse activation patterns of the mechanical properties of otolith organs that are induced by head tilts.

3.
J Orthop Surg Res ; 19(1): 273, 2024 May 02.
Article in English | MEDLINE | ID: mdl-38698477

ABSTRACT

BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor. METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient's clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded. RESULTS: The average patients' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects. CONCLUSION: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.


Subject(s)
Bone Neoplasms , Printing, Three-Dimensional , Prosthesis Design , Talus , Humans , Talus/surgery , Talus/diagnostic imaging , Male , Adult , Female , Bone Neoplasms/surgery , Bone Neoplasms/diagnostic imaging , Retrospective Studies , Middle Aged , Young Adult , Prosthesis Implantation/methods , Prosthesis Implantation/instrumentation , Adolescent , Ankle Joint/surgery , Ankle Joint/diagnostic imaging , Osseointegration , Treatment Outcome , Range of Motion, Articular , Prostheses and Implants
4.
Nat Commun ; 15(1): 3746, 2024 May 03.
Article in English | MEDLINE | ID: mdl-38702319

ABSTRACT

The neural basis of fear of heights remains largely unknown. In this study, we investigated the fear response to heights in male mice and observed characteristic aversive behaviors resembling human height vertigo. We identified visual input as a critical factor in mouse reactions to heights, while peripheral vestibular input was found to be nonessential for fear of heights. Unexpectedly, we found that fear of heights in naïve mice does not rely on image-forming visual processing by the primary visual cortex. Instead, a subset of neurons in the ventral lateral geniculate nucleus (vLGN), which connects to the lateral/ventrolateral periaqueductal gray (l/vlPAG), drives the expression of fear associated with heights. Additionally, we observed that a subcortical visual pathway linking the superior colliculus to the lateral posterior thalamic nucleus inhibits the defensive response to height threats. These findings highlight a rapid fear response to height threats through a subcortical visual and defensive pathway from the vLGN to the l/vlPAG.


Subject(s)
Fear , Geniculate Bodies , Mice, Inbred C57BL , Superior Colliculi , Visual Pathways , Animals , Male , Fear/physiology , Mice , Geniculate Bodies/physiology , Superior Colliculi/physiology , Visual Pathways/physiology , Periaqueductal Gray/physiology , Neurons/physiology , Primary Visual Cortex/physiology , Visual Perception/physiology , Behavior, Animal/physiology
5.
Eur Spine J ; 2024 May 07.
Article in English | MEDLINE | ID: mdl-38713447

ABSTRACT

PURPOSE: The spinopelvic reconstruction poses significant challenges following total sacrectomy in patients with malignant or aggressive benign bone tumours encompassing the entire sacrum. In this study, we aim to assess the functional outcomes and complications of an integrated 3D-printed sacral endoprostheses featuring a self-stabilizing design, eliminating the requirement for supplemental fixation. METHODS: We retrospectively analyzed patients with sacral tumours who underwent total sacrectomy followed by reconstruction with 3D-printed self-stabilizing endoprosthesis. Clinically, we evaluated functional outcomes using the 1993 version of the musculoskeletal tumour society (MSTS-93) score. Perioperative and postoperative complications were also documented. RESULTS: 10 patients met final inclusion criteria. The median age was 49 years (range, 31-64 years). The median follow-up time was 26.5 months (range, 15-47 months). Median postoperative functional MSTS-93 was 22.5 (range, 13-25). The median operation time was 399.5 min (305-576 min), and the median intraoperative blood loss was and 3200 ml (2400-7800 ml). Complications include wound dehiscence in one patient, bowel, bladder, and sexual dysfunction in four patients, cerebrospinal fluid leak in one patient, and tumour recurrence in one patient. There were no mechanical complications related to the endoprosthesis at the last follow-up. CONCLUSION: The utilization of 3D-printed self-stabilizing endoprosthesis proved to be a viable approach, yielding satisfactory short-term outcomes in patients undergoing total sacral reconstruction without supplemental fixation.

6.
Front Oncol ; 14: 1399574, 2024.
Article in English | MEDLINE | ID: mdl-38807768

ABSTRACT

Introduction: Desmoid fibromatosis is an aggressive fibroblastic neoplasm with a high propensity for local recurrence. Targeted therapy for Desmoid fibromatosis represents a novel avenue in systemic treatment. Anlotinib, a novel multitargeted angiogenesis inhibitor, represents a novel approach for targeted therapy. Therefore, this study aims to assess the efficacy and safety of anlotinib in patients with Desmoid fibromatosis. Methods: We retrospectively gathered the clinical medical records of Desmoid fibromatosis patients who underwent anlotinib treatment between June 2019 and November 2023 at our center. Anlotinib was initiated at a daily dose of 12 mg and adjusted based on drug-related toxicity. Tumor response was evaluated using the Response Evaluation Criteria in Solid Tumors 1.1 criteria. Progression-free survival served as the primary endpoint and was analyzed utilizing the Kaplan-Meier method. Results: In total, sixty-six consecutive patients were enrolled. No patients achieved a complete response; however, fourteen patients (21.21%) exhibited a partial response, while forty-six patients (70%) experienced disease stability. Progressive disease was observed in 6 patients (9.10%), and the progression-free survival rates at 12 and 36months were 89.71% and 82.81%, respectively. The disease control rate was 90.91%, while the objective response rate was 21.21%. Conclusion: Anlotinib proves effective in managing recurrent and symptomatic patients with Desmoid fibromatosis. However, the toxicity profile of anlotinib presents a higher risk of Hand-Foot Skin Reaction and hypertension. Therefore, given that 41.67% of patients were subjected to dose adjustments associated with the initial dose of 12 mg, implementing dosage reductions may help balance efficacy with side effects.

7.
J Orthop Surg Res ; 19(1): 210, 2024 Apr 01.
Article in English | MEDLINE | ID: mdl-38561755

ABSTRACT

OBJECTIVE: This study aims to biomimetic design a new 3D-printed lattice hemipelvis prosthesis and evaluate its clinical efficiency for pelvic reconstruction following tumor resection, focusing on feasibility, osseointegration, and patient outcomes. METHODS: From May 2020 to October 2021, twelve patients with pelvic tumors underwent tumor resection and subsequently received 3D-printed lattice hemipelvis prostheses for pelvic reconstruction. The prosthesis was strategically incorporated with lattice structures and solid to optimize mechanical performance and osseointegration. The pore size and porosity were analyzed. Patient outcomes were assessed through a combination of clinical and radiological evaluations. RESULTS: Multiple pore sizes were observed in irregular porous structures, with a wide distribution range (approximately 300-900 µm). The average follow-up of 34.7 months, ranging 26 from to 43 months. One patient with Ewing sarcoma died of pulmonary metastasis 33 months after surgery while others were alive at the last follow-up. Postoperative radiographs showed that the prosthesis's position was consistent with the preoperative planning. T-SMART images showed that the host bone was in close and tight contact with the prosthesis with no gaps at the interface. The average MSTS score was 21 at the last follow-up, ranging from 18 to 24. There was no complication requiring revision surgery or removal of the 3D-printed hemipelvis prosthesis, such as infection, screw breakage, and prosthesis loosening. CONCLUSION: The newly designed 3D-printed lattice hemipelvis prosthesis created multiple pore sizes with a wide distribution range and resulted in good osteointegration and favorable limb function.


Subject(s)
Bone Neoplasms , Pelvic Neoplasms , Humans , Prosthesis Design , Biomimetics , Titanium , Prosthesis Implantation/methods , Pelvic Neoplasms/surgery , Bone Neoplasms/diagnostic imaging , Bone Neoplasms/surgery , Bone Neoplasms/pathology , Retrospective Studies , Treatment Outcome , Printing, Three-Dimensional
8.
Int J Mol Sci ; 25(8)2024 Apr 09.
Article in English | MEDLINE | ID: mdl-38673726

ABSTRACT

Bone tumors, particularly osteosarcoma, are prevalent among children and adolescents. This ailment has emerged as the second most frequent cause of cancer-related mortality in adolescents. Conventional treatment methods comprise extensive surgical resection, radiotherapy, and chemotherapy. Consequently, the management of bone tumors and bone regeneration poses significant clinical challenges. Photothermal tumor therapy has attracted considerable attention owing to its minimal invasiveness and high selectivity. However, key challenges have limited its widespread clinical use. Enhancing the tumor specificity of photosensitizers through targeting or localized activation holds potential for better outcomes with fewer adverse effects. Combinations with chemotherapies or immunotherapies also present avenues for improvement. In this review, we provide an overview of the most recent strategies aimed at overcoming the limitations of photothermal therapy (PTT), along with current research directions in the context of bone tumors, including (1) target strategies, (2) photothermal therapy combined with multiple therapies (immunotherapies, chemotherapies, and chemodynamic therapies, magnetic, and photodynamic therapies), and (3) bifunctional scaffolds for photothermal therapy and bone regeneration. We delve into the pros and cons of these combination methods and explore current research focal points. Lastly, we address the challenges and prospects of photothermal combination therapy.


Subject(s)
Bone Neoplasms , Infrared Rays , Photothermal Therapy , Humans , Bone Neoplasms/therapy , Photothermal Therapy/methods , Infrared Rays/therapeutic use , Animals , Photosensitizing Agents/therapeutic use , Osteosarcoma/therapy , Osteosarcoma/pathology , Combined Modality Therapy/methods , Immunotherapy/methods , Photochemotherapy/methods , Bone Regeneration
9.
Biochem Pharmacol ; 223: 116132, 2024 May.
Article in English | MEDLINE | ID: mdl-38492782

ABSTRACT

Cisplatin is an effective chemotherapeutic drug for different cancers, but it also causes severe and permanent hearing loss. Oxidative stress and mitochondrial dysfunction in cochlear hair cells (HCs) have been shown to be important in the pathogenesis of cisplatin-induced hearing loss (CIHL). CDGSH iron sulfur domain 1 (CISD1, also known as mitoNEET) plays a critical role in mitochondrial oxidative capacity and cellular bioenergetics. Targeting CISD1 may improve mitochondrial function in various diseases. However, the role of CISD1 in cisplatin-induced ototoxicity is unclear. Therefore, this study was performed to assess the role of CISD1 in cisplatin-induced ototoxicity. We found that CISD1 expression was significantly increased after cisplatin treatment in both HEI-OC1 cells and cochlear HCs. Moreover, pharmacological inhibition of CISD1 with NL-1 inhibited cell apoptosis and reduced mitochondrial reactive oxygen species accumulation in HEI-OC1 cells and cochlear explants. Inhibition of CISD1 with small interfering RNA in HEI-OC1 cells had similar protective effects. Furthermore, NL-1 protected against CIHL in adult C57 mice, as evaluated by the auditory brainstem response and immunofluorescent staining. Mechanistically, RNA sequencing revealed that NL-1 attenuated CIHL via the PI3K and MAPK pathways. Most importantly, NL-1 did not interfere with the antitumor efficacy of cisplatin. In conclusion, our study revealed that targeting CISD1 with NL-1 reduced reactive oxygen species accumulation, mitochondrial dysfunction, and apoptosis via the PI3K and MAPK pathways in HEI-OC1 cell lines and mouse cochlear explants in vitro, and it protected against CIHL in adult C57 mice. Our study suggests that CISD1 may serve as a novel target for the prevention of CIHL.


Subject(s)
Antineoplastic Agents , Hearing Loss , Mitochondrial Diseases , Ototoxicity , Mice , Animals , Cisplatin/toxicity , Cisplatin/metabolism , Antineoplastic Agents/toxicity , Phosphatidylinositol 3-Kinases/metabolism , Reactive Oxygen Species/metabolism , Ototoxicity/prevention & control , Hearing Loss/chemically induced , Hearing Loss/prevention & control , Apoptosis , Membrane Proteins/metabolism , Iron-Binding Proteins/pharmacology
10.
Heliyon ; 10(5): e26750, 2024 Mar 15.
Article in English | MEDLINE | ID: mdl-38463886

ABSTRACT

The interplay between digitalization and economic development constitutes a pivotal global issue, yet empirical research on agricultural ecological efficiency in developing countries remains limited. This study initially establishes a measurement system and a comprehensive index for the level of agricultural digitalization. Subsequently, it delineates the relationship between agricultural digitalization level and agroecological efficiency using the spatial Durbin model, and ultimately explores the enhancing effect of agricultural digitalization level on agroecological efficiency using China as a case study. Research reveals that the agricultural ecological efficiency across the 31 mainland Chinese provinces demonstrates a generally linear upward trajectory, embodying both agglomeration and heterogeneity. The level of agricultural digitization exerts a significant, positive direct impact and facilitates a spatial spillover effect on agricultural ecological efficiency. Other control variables, such as financial support for agriculture and local economic development, impart a positive direct impact on regional agricultural ecological efficiency, while rural household operating income propels a positive spatial spillover effect on adjacent areas. The findings furnish guidance for developing countries to adeptly execute digital rural construction, aiming to enhance agricultural ecological efficiency amidst carbon constraints.

11.
Orthop Surg ; 16(4): 1010-1016, 2024 Apr.
Article in English | MEDLINE | ID: mdl-38316419

ABSTRACT

BACKGROUND: The advent of three-dimensional (3D)-printed custom-made implants has revolutionized orthopaedic surgery, particularly in limb- and joint-sparing surgeries. However, clinical experience in the revision for 3D-printed implant breakage is lacking, and the revision surgery remains challenging. This study reported the revision of proximal tibial prosthetic reconstruction necessitated by solid-body breakage of a 3D-printed implant, aiming to detail the surgical techniques and evaluate postoperative outcomes. CASE PRESENTATION: A patient diagnosed with osteosarcoma underwent joint-sparing surgery with a 3D-printed implant, but implant breakage occurred during subsequent follow-up. The initial implant was broken into two parts: the proximal implant breakage part (IBP) integrated with the host bone and the distal IBP left in the prosthetic component. Four revision protocols were devised, each based on one of the four hypothesis results of taking out the initial implant. A new custom-made implant and a series of assistance devices ("positioning devices," "drill devices," "tap devices," and "separator devices") were specifically prepared for revision surgery. The proximal IBP was taken out from the host bone, but the distal IBP was not taken out from the initial prosthetic component. The patient received the new custom-made implant for reconstruction, with the knee joint preserved. The patient recovered uneventfully after revision surgery and achieved satisfactory function. The Musculoskeletal Tumor Society was 28 at the last follow-up. No complications were detected during the follow-up period. CONCLUSION: Comprehensive preoperative planning and preparation, enabling the surgeon to effectively address intraoperative challenges, are crucial for the successful revision of 3D-printed implant breakage. It is feasible to re-implant a 3D-printed custom-made implant, demonstrating satisfactory clinical and functional results.


Subject(s)
Knee Joint , Tibia , Humans , Prosthesis Design , Knee Joint/surgery , Tibia/surgery , Printing, Three-Dimensional , Retrospective Studies
12.
Orthop Surg ; 16(4): 821-829, 2024 Apr.
Article in English | MEDLINE | ID: mdl-38296795

ABSTRACT

OBJECTIVE: Geographic defect reconstruction in load-bearing bones presents formidable challenges for orthopaedic surgeon. The use of 3D-printed personalized implants presents a compelling opportunity to address this issue. This study aims to design, manufacture, and evaluate 3D-printed personalized implants with irregular lattice porous structures for geographic defect reconstruction in load-bearing bones, focusing on feasibility, osseointegration, and patient outcomes. METHODS: This retrospective study involved seven patients who received 3D-printed personalized lattice implants for the reconstruction of geographic defects in load-bearing bones. Personalized implants were customized for each patient. Randomized dodecahedron unit cells were incorporated within the implants to create the porous structure. The pore size and porosity were analyzed. Patient outcomes were assessed through a combination of clinical and radiological evaluations. Tomosynthesis-Shimadzu metal artifact reduction technology (T-SMART) was utilized to evaluate osseointegration. Functional outcomes were assessed according to the Musculoskeletal Tumor Society (MSTS) 93 score. RESULTS: Multiple pore sizes were observed in porous structures of the implant, with a wide distribution range (approximately 300-900 um). The porosity analysis results showed that the average porosity of irregular porous structures was around 75.03%. The average follow-up time was 38.4 months, ranging from 25 to 50 months. Postoperative X-rays showed that the implants matched the geographic bone defect well. Osseointegration assessments according to T-SMART images indicated a high degree of bone-to-implant contact, along with favorable bone density around the implants. Patient outcomes assessments revealed significant improvements in functional outcomes, with the average MSTS score of 27.3 (range, 26-29). There was no implant-related complication, such as aseptic loosening or structure failure. CONCLUSION: 3D-printed personalized lattice implants offer an innovative and promising strategy for geographic defect reconstruction in load-bearing bones. This approach has the potential to match the unique contours and geometry of the geographic bone defect and facilitate osteointegration.


Subject(s)
Bone and Bones , Prostheses and Implants , Humans , Retrospective Studies , Printing, Three-Dimensional , Weight-Bearing , Porosity , Titanium/chemistry
13.
J Shoulder Elbow Surg ; 33(3): 556-563, 2024 Mar.
Article in English | MEDLINE | ID: mdl-37783308

ABSTRACT

BACKGROUND: Giant cell tumor of bone (GCTB) (Campanacci III) or malignant tumors extend to the epiphyseal region of the proximal radius, and intra-articular resection of the proximal radius is often needed. In the present study, we present the patients who underwent reconstruction of the proximal radius with 3D-printed personalized prosthesis after tumor resection, aiming to describe the prosthesis design and surgical technique and evaluate the clinical outcomes of this method. METHODS: Between November 2018 and January 2021, 9 patients received radial hemiarthroplasty with 3D-printed personalized prostheses after tumor resection. The pathologic diagnosis was GCTB (Campanacci III) in 7 patients, osteosarcoma (IIB) in 1 patient, and synovial sarcoma (IIB) in 1 patient. The range of motion (ROM) and strength in terms of elbow flexion/extension and forearm supination/pronation were evaluated. Pain was assessed by the visual analog scale (VAS) preoperatively and at each follow-up visit. To evaluate the functional outcome, the Mayo Elbow Performance Score (MEPS) system and the Musculoskeletal Tumor Society (MSTS) scoring system were administered at each follow-up visit. Complications and oncological outcomes were recorded. RESULTS: The patients were followed from 24 to 51 months, with a median follow-up of 35 months. No patients were lost to follow-up. During the follow-up, local recurrence and metastasis were not observed. The VAS score improved from a median of 5 points (range 4-7) preoperatively to 1 point (range 0-2) at the last follow-up visit. The mean MEPS score was 88.5% (83-93), and the mean MSTS score was 25.3 (24-27) at the last follow-up visit. No complications such as infection and aseptic loosening were detected. CONCLUSIONS: The implantation of a 3D-printed personalized prosthesis after proximal radial resection showed excellent oncologic outcomes and postoperative function at short-term follow-up and is a viable alternative method for reconstruction of the proximal radius bone defect after tumor resection.


Subject(s)
Bone Neoplasms , Radius , Humans , Radius/surgery , Elbow/pathology , Bone Neoplasms/pathology , Retrospective Studies , Prosthesis Design , Printing, Three-Dimensional , Treatment Outcome
14.
Orthop Surg ; 16(2): 374-382, 2024 Feb.
Article in English | MEDLINE | ID: mdl-38111053

ABSTRACT

BACKGROUND: Intercalary reconstruction for patients with short residual bone segments remains challenging. Three-dimensional (3D)-printed custom-made porous implants are a promising technique for short-segment fixation in these patients. This study aims to evaluate the efficiency of 3D-printed custom-made porous components (3DCPCs) for short-segment fixation, focusing on prosthesis survivorship, radiographic results, and potential complications. METHODS: This retrospective study involved 39 patients who underwent intercalary prosthetic reconstruction with 3DCPCs after tumor resection of the femur, tibia, or humerus from June 2015 to October 2020. Segment bone loss involved the femur (n = 15), tibia (n = 16), and humerus (n = 8), leaving 78 residual bone segments. There were 46 short segments requiring 46 3DCPCs and 32 segments with the ability to accommodate 32 off-the-shelf standard uncemented stems for prosthesis fixation. Clinical and functional outcomes were evaluated. Prosthesis-overall survivorship and prosthesis-specific survivorship were analyzed using Kaplan-Meier survival analysis. Radiographic results and modes of failure of using this technique were also examined. RESULTS: The mean follow-up was 41 months. The prosthesis-overall survivorship was 87.2% and 84.6% at 2 and 5 years, respectively. The prosthesis-specific survivorship was 92.1% and 89.5% at 2 and 5 years, respectively. There was not a substantial difference in prosthesis survivorship among the femur, tibia, and humerus. The average MSTS score was 26.2, ranging from 22 to 28. The radiographic evaluation results revealed excellent or good interface (38/46) in most of the 46 porous components. A total of 38 of 46 bone segments' remolding demonstrated no change. In total, seven patients (16.3%) had complications requiring further surgery. CONCLUSION: The prosthesis survivorship of using 3DCPCs for short-segment fixation is similar or better compared to other studies involving intercalary prosthetic reconstruction with short-segment fixation. Radiographic evaluation revealed good osteointegration and avoidance of stress shielding. Overall, intercalary prosthetic reconstruction with 3DCPC is a feasible modality for patients with short residual bone segments after tumor resection.


Subject(s)
Bone Neoplasms , Humans , Bone Neoplasms/diagnostic imaging , Bone Neoplasms/surgery , Retrospective Studies , Porosity , Treatment Outcome , Humerus/diagnostic imaging , Humerus/surgery , Prosthesis Design
15.
Front Public Health ; 11: 1233970, 2023.
Article in English | MEDLINE | ID: mdl-37927875

ABSTRACT

Objective: Based on the social-ecological systems theory and social support theory, this study aims to explore the relationship between a health-supportive environment and well-being among residents. It further examined the mediating role of physical activity and health status in the pathway between a health-supportive environment and well-being. Methods: The study utilized data from 2,717 samples of the China General Social Survey (2021) and conducted multiple regression analysis and mediation analysis using statistical software Stata 16.0 and SPSS PROCESS 3.3. Results: (1) A health-supportive environment had a significant impact on residents' well-being (t = 8.476, p < 0.001). (2) Among the three dimensions of natural environment, built environment, and neighborhood social environment, the influence of neighborhood social relationship environment had the strongest influence on residents' well-being (t = 8.443, p < 0.001). (3) Physical activity and health status played a mediating role in the relationship between a health-supportive environment and residents' well-being. The mediating effect was as follows: health-supportive environment → physical activity → well-being with a mediation effect of 0.020; health-supportive environment → health status → well-being with a mediation effect of 0.029; health-supportive environment → physical activity → health status → well-being with a mediation effect of 0.008. Conclusion: A health-supportive environment not only directly influences residents' well-being but also indirectly affects it through physical activity and health status. It is essential to focus on improving both the natural and built environment as well as the neighborhood social relationship environment in enhancing residents' well-being. Physical activity serves as an important means to improve residents' health level and promote their well-being.


Subject(s)
Exercise , Health Status , Cross-Sectional Studies , Built Environment , China
16.
Front Oncol ; 13: 1235158, 2023.
Article in English | MEDLINE | ID: mdl-38033504

ABSTRACT

Background: Osteosarcoma is a primary malignant bone tumor with a high metastatic potential that accounts for a significant proportion of all bone tumors. The prognosis for patients with metastatic or recurrence disease remains poor. The neutrophil-to-lymphocyte ratio (NLR) has become a potential prognostic biomarker for cancer. Recent evidence suggests that the dynamic changes in neutrophil-to-lymphocyte ratio (NLR) during treatment may be more informative in predicting patient prognosis, but the value of dynamic NLR in osteosarcoma has not yet been determined. Methods: This retrospective study retrospectively analyzed the clinical information of 251 osteosarcoma patients diagnosed and treated in West China Hospital of Sichuan University, explored the impact of baseline NLR and changes in NLR during treatment on the prognosis of osteosarcoma patients, and further combined baseline NLR with Delta NLR to build an NLR staging system. Results: The results showed that both baseline NLR and delta NLR had some predictive ability for the prognosis of osteosarcoma patients (P = 6.90e-4, P = 0.022). Patients with high baseline NLR were more likely to have a decrease in delta NLR (P = 1.24e-10). The NLR stage had a better predictive ability than baseline NLR and delta NLR, and was an independent prognostic factor for overall survival in osteosarcoma patients HR: 2.456 (1.625-3.710) (P = 1.97e-05). Conclusion: NLR has value in continuous monitoring, and continuous monitoring of NLR can better predict the survival of osteosarcoma patients compared to baseline NLR.

17.
Br J Surg ; 110(12): 1712-1722, 2023 11 09.
Article in English | MEDLINE | ID: mdl-37824784

ABSTRACT

Resection of pelvic bone tumors and the subsequent reconstruction of the pelvic girdle pose challenges due to complex anatomy, load-bearing demands, and significant defects. 3D-printed implants have revolutionized pelvic girdle reconstruction by offering customized solutions, porous surface structures for precise resection with custom guides, and improved integration. Many tertiary medical centers have adopted 3Dprinted hemipelvic endoprostheses, leading to enhanced outcomes. However, most studies are limited to single centers, with a small number of cases and short follow-up periods. Additionally, the design of these implants often relies heavily on individual experience, resulting in a lack of uniformity and significant variation. To provide a comprehensive assessment of this technology, we conducted an analysis of existing literature, encompassing tumor resection classification, various types of prosthesis design, reconstruction concepts, and post-reconstruction functional outcomes.


Subject(s)
Bone Neoplasms , Pelvic Bones , Pelvic Neoplasms , Plastic Surgery Procedures , Sarcoma , Humans , Printing, Three-Dimensional , Prosthesis Design , Sarcoma/surgery , Pelvic Bones/surgery , Pelvic Bones/pathology , Pelvic Neoplasms/surgery , Pelvic Neoplasms/pathology , Bone Neoplasms/surgery , Retrospective Studies , Treatment Outcome
18.
Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi ; 37(10): 1183-1189, 2023 Oct 15.
Article in Chinese | MEDLINE | ID: mdl-37848311

ABSTRACT

Objective: To investigate the effectiveness of three-dimensional (3D)-printed hemi-pelvic prosthesis for revision of aseptic loosening or screw fracture of modular hemi-pelvic prosthesis. Methods: Between February 2017 and January 2020, 11 patients with aseptic loosening or screw fracture of modular hemi-pelvic prosthesis were revised using 3D-printed hemi-pelvic prostheses. There were 7 males and 4 females with an average age of 44 years (range, 25-60 years). In the first operation, all patients underwent total tumor resection, modular hemi-pelvic prosthesis reconstruction, and autologous femoral head transplantation. According to the Enneking pelvic partition system, 8 cases were resected in zones Ⅰ+Ⅱ and 3 cases in zones Ⅰ+Ⅱ+Ⅲ. The interval from the initial operation to this revision ranged from 14.3-66.2 months, with an average of 35.8 months. The operation time, the amount of intraoperative bleeding, and the occurrence of complications were recorded. At 6 months after the first operation, before revision, and at last follow-up, the American Musculoskeletal Tumor Society (MSTS) score and Harris score were used to evaluate the recovery of lower limb function. The pain-free walking distance of patients without brace assistance was recorded at last follow-up. X-ray films were taken at 1 month after the first operation, before revision, and at 1 month after revision, the acetabulum position was assessed by the differences in weight arm and cup height between bilateral hip joints. At last follow-up, the digital X-ray tomography was taken to evaluate the prosthesis-bone integration and the occurrence of aseptic loosening. Results: The operation time was 182.6-238.0 minutes (mean, 197.4 minutes). The amount of intraoperative bleeding was 400-860 mL (mean, 550.0 mL). All incisions healed by first intention with no infection, hip dislocation, nerve damage, or vascular-related adverse events. The MSTS score and Harris score at last follow-up were significantly higher than those at 6 months after the first operation and before revision ( P<0.05), while the score before revision was significantly lower than that at 6 months after the first operation ( P<0.05). At last follow-up, the patients were able to walk more than 1 000 meters painlessly without brace assistance. Imaging review showed that the difference of cup height at 1 month after revision was significantly lower than that at 1 month after the first operation and before revision, and at 1 month after the first operation than before revision operation, and the differences were significant ( P<0.05). There was no significant difference in the difference of weight arm among three time points ( P>0.05). All prostheses were well integrated, and no aseptic loosening of the prosthesis or screw fracture occurred. Conclusion: Revision with 3D-printed hemi-pelvic prostheses benefited in reconstructing stable pelvic ring and natural bodyweight transmission for patients encountering the aseptic loosening or screw fracture of modular hemi-pelvic prosthesis. Early postoperative rehabilitation training can maximize the recovery of patient limb function, reduce pain during walking, and reduce the incidence of complications.


Subject(s)
Arthroplasty, Replacement, Hip , Fractures, Bone , Hip Prosthesis , Neoplasms , Male , Female , Humans , Adult , Arthroplasty, Replacement, Hip/methods , Treatment Outcome , Prosthesis Failure , Fractures, Bone/surgery , Retrospective Studies
19.
Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi ; 37(10): 1190-1197, 2023 Oct 15.
Article in Chinese | MEDLINE | ID: mdl-37848312

ABSTRACT

Objective: To investigate the long-term effectiveness of uncemented allograft-prosthesis composite (APC) for reconstruction of bone defects after proximal femur tumor resection. Methods: Between June 2007 and March 2014, 21 patients who underwent uncemented APC reconstruction of proximal femur after tumor resection were retrospectively evaluated. There were 9 males and 12 females with an average age of 33.2 years (range, 19-54 years). There were 9 cases of giant cell tumor of bone, 5 cases of osteosarcoma, 4 cases of osteoblastic osteosarcoma, 2 cases of chondrosarcoma, and 1 case of undifferentiated pleomorphic sarcoma. Thirteen cases of benign bone tumors were all classified as stage 3 by Enneking staging; and 8 cases of malignant bone tumors were classified as grade ⅡB in 7 cases and grade ⅡA in 1 case according to the American Joint Committee on Cancer (AJCC) staging system. Among them, 7 patients underwent reoperation after recurrence, and the rest were primary operations; 8 patients presented with pathological fractures. The preoperative Harris hip score (HHS) and American Musculoskeletal Tumor Society (MSTS) score was 40 (30, 49) and 9.1±3.5, respectively. The length of osteotomy was 80-154 mm, with an average of 110 mm. At 1 year after operation and last follow-up, HHS and MSTS scores were utilized to evaluate the function of hip joint; the gluteus medius strength score was used to evaluation of the hip abduction function. Image examinations were taken at 1, 3, 6, 9, and 12 months after operation and every year thereafter to assess the union of allograft-host bone interfaces. Intra- and post-operative complications were also recorded. Results: All patients were followed up 84-163 months (mean, 123.5 months). At 1 year after operation and last follow-up, the HHS and MSTS scores significantly improved when compared with the preoperative scores ( P<0.05). However, there was no significant difference in the HHS score, MSTS score, and gluteus medius strength score between the two time points after operation ( P>0.05). Image examination showed that all allograft-host bone interfaces achieved union after 5-10 months (mean, 7.6 months). At last follow-up, all patients had bone resorption, including 11 severe cases, 4 moderate cases, and 6 mild cases; the bone resorption sites included Gruen 1, 2, and 7 regions. Complications included 10 fractures and 1 prosthetic fracture. Local recurrence occurred in 3 patients and pulmonary metastasis in 3 patients. Conclusion: Uncemented APC is a reliable method for the reconstruction of bone defects after proximal femur tumor resection. It has the good long-term effectiveness and possesses obvious advantages in the union at the bone-bone surface.


Subject(s)
Bone Neoplasms , Bone Resorption , Osteosarcoma , Adult , Female , Humans , Male , Allografts/pathology , Bone Neoplasms/surgery , Bone Resorption/etiology , Bone Resorption/pathology , Bone Transplantation/methods , Femur/surgery , Osteosarcoma/surgery , Osteosarcoma/pathology , Prostheses and Implants , Retrospective Studies , Treatment Outcome , Young Adult , Middle Aged
20.
J Orthop Surg Res ; 18(1): 648, 2023 Sep 01.
Article in English | MEDLINE | ID: mdl-37658436

ABSTRACT

BACKGROUND: This study reports our experience in the treatment of aggressive pelvic GCT through wide resection assisted with patient-specific bone-cutting guides (PSBCGs) and subsequent reconstruction with 3D-printed personalized implants (3DPIs), aiming to present the operative technique of this method and evaluate its clinical efficacy. METHODS: We retrospectively analyzed seven patients who underwent wide resection of pelvic GCT followed by reconstruction with 3DPIs from August 2019 to February 2021. There were two males and five females, with a mean age of 43 years. PSBCGs and 3DPIs were prepared using 3D-printing technology. The operational outcomes, local recurrence, radiological results, and any associated complications of this technique were assessed. And the functional outcomes were assessed according to the Musculoskeletal Tumor Society (MSTS) 93 functional score. RESULTS: The mean follow-up time was 35.3 months (range 28-45 months). There was no intraoperative complication. Negative surgical margins were achieved in all patients. Postoperative pelvic radiographs showed that 3DPIs matched the shape and size of the bone defect. The anterior-posterior, inlet, and outlet pelvic radiograph demonstrated precise reconstruction consistent with the surgical planning. In addition, tomosynthesis-Shimadzu metal artifact reduction technology (T-SMART) showed good osseointegration at an average of three months after surgery (range 2-4 months). There was no local recurrence or tumor metastasis. The average MSTS score was 24.4 (range 23-27) at the last follow-up. Delayed wound healing was observed in one patient, and the wounds healed after debridement. Prosthesis-related complications were not detected during the follow-up, such as aseptic loosening or structure failure. CONCLUSIONS: The treatment of aggressive pelvic GCTs through wide resection assisted with PSBCGs and subsequent reconstruction with 3DPIs is a feasible method, which provides good clinical results and reasonable functional outcomes.


Subject(s)
Bone Neoplasms , Giant Cell Tumor of Bone , Pelvic Bones , Plastic Surgery Procedures , Surgical Wound , Adult , Female , Humans , Male , Printing, Three-Dimensional , Prostheses and Implants , Retrospective Studies , Surgical Wound/surgery , Pelvic Bones/surgery , Giant Cell Tumor of Bone/surgery , Bone Neoplasms/surgery
SELECTION OF CITATIONS
SEARCH DETAIL
...