Sensitive detection of L-5-hydroxytryptophan based on molecularly imprinted polymers with graphene amplification.

A novel electrochemical sensor was presented for the determination of L-5-hydroxytryptophan (L-5-HTP) based on a graphene-chitosan molecularly imprinted film modified on the surface of glassy carbon electrode (GR-MIP/GCE). The morphology and composition of the imprinted film were observed in field emission scanning electron microscopy (FESEM), raman spectroscopy and fourier transform infrared (FTIR). The properties of the sensor were evaluated by electrochemical techniques. Under the optimal conditions, the peak currents of L-5-HIP were found to be linear in the concentration range of 0.05-7.0 µM, while the sensor also exhibited great features such as low detection limit of 6.0 nM (S/N = 3), superb selectivity against the structural analogues, good antidisturbance ability among coexisting components, excellent repeatability and stability. Moreover, the proposed method had been applied to the detection of L-5-HTP in human blood serum with a satisfactory recoveries ranging from 90.6% to 105.6%.

Xanthine microsensor based on polypyrrole molecularly imprinted film modified carbon fiber microelectrodes.

A molecularly imprinted polymers (MIPs) microsensor was presented as a carbon fiber microelectrode (CFME) coating for specifically recognizing xanthine (Xan). The polymeric film was obtained based on the imprinted procedure of electropolymerization of pyrrole in the presence of the template molecule Xan by cyclic voltammetry, and template was removed by magnetic stirring. Under the optimum conditions, a satisfactory molecularly binding selectivity of Xan was obtained from the MIPs microsensor with an imprinting factor (IF) of 6.63 and a linear response to concentration in certain ranges. The ranges are from 4.0 × 10⁻6 to 6.0 × 10⁻5 M and from 8.0 × 10⁻5 to 2.0 × 10⁻³ M with a detection limit of 2.5 × 10⁻7 M. Meanwhile, good stability (relative standard deviation [RSD] = 3.2%, n = 10) and reproducibility (RSD = 2.0%, n = 10) were observed, and recoveries ranging from 96.9 to 102.5% were calculated when applied to Xan determination in real blood serum samples.

A urea electrochemical sensor based on molecularly imprinted chitosan film doping with CdS quantum dots.

An improved imprinted film-based electrochemical sensor for urea recognition was developed using CdS quantum dots (QDs) doped chitosan as the functional matrix. The microstructure and composition of the imprinted films depicted by scanning electron microscopy (SEM), attenuated total reflection infrared (ATR-IR), X-ray diffraction (XRD), and electrochemical impedance spectroscopy (EIS) indicated the fabricated feasibility of the nanoparticle doped films via in situ electrodeposition. Differential pulse voltammetric responses under the optimal fabrication conditions showed that the sensitivity of CdS QDs-MIP (molecularly imprinted polymer) electrochemical sensor was enhanced from the favorable electron transfer and magnified surface area of CdS QDs with a short adsorption equilibrium time (7 min), wide linear range (5.0 × 10(-12) to 4.0 × 10(-10) M and 5.0 × 10(-10) to 7.0 × 10(-8) M), and low detection limit (1.0 × 10(-12) M). Meanwhile, the fabricated sensor showed excellent specific recognition to template molecule among the structural similarities and coexistence substances. Furthermore, the proposed sensor was applied to determine the urea in human blood serum samples based on its good reproducibility and stability, and the acceptable recovery implied its feasibility for practical application.