Exploring the humification process of municipal sludge in hyperthermophilic composting through metagenomic and untargeted metabolomic.

Hyperthermophilic composting (HC) has been widely recognized for the advantage of high treatment efficiency for organic wastes. However, the humification process is still unclear. In this study, the humification process of HC was investigated, compared to conventional composting (CK). The results showed that the highest composting temperature, organic matter degradation rate, and humification index in HC were 92.62 °C, 23.98%, and 1.59, while those in CK were 70.23 °C, 14.49 %, and 1.04, indicating HC accelerated humification process. Moreover, the results of metagenomic and untargeted metabolomic showed that the genes and metabolisms related to carbohydrate, lipid, amino acid, fatty acid, and nucleotide were more abundant in HC. Consequently, the metabolic pathways regarding organic matter degradation and microbial reproduction were enhanced in the high temperature stage of HC, further accelerating the humification reaction in the low temperature stage. This work contributes to the comprehension of the humification mechanism in HC.

An efficient anoxic/aerobic/aerobic/anoxic process for domestic sewage treatment: From feasibility to application.

In this paper, the anoxic/aerobic/aerobic/anoxic (AOOA) process was proposed using fixed biofilms in a continuous plug-flow multi-chamber reactor, and no sludge reflux operation was performed during the 190 days of operation. The reactor volume ratio of 1.5:2:1.5:1 (A/O/O/A) with the dissolved oxygen (DO) concentration of 2 mg L-1 in the aerobic zone was the optimal condition for reactor operation. According to the results obtained from the treatment of real domestic sewage, when the hydraulic retention time (HRT) was 6 h, the effluent of the reactor could meet the discharge standard even in cold conditions (13°C). Specifically, the elemental-sulfur-based autotrophic denitrification (ESAD) process contributed the most to the removal of total inorganic nitrogen (TIN) in the reactor. In addition, the use of vibration method was helpful in removing excess sludge from the biofilms of the reactor. Overall, the AOOA process is an efficient and convenient method for treating domestic sewage.

Denitrification Performance in Packed-Bed Reactors Using Novel Carbon-Sulfur-Based Composite Filters for Treatment of Synthetic Wastewater and Anaerobic Ammonia Oxidation Effluent.

To avoid nitrate pollution in water bodies, two low-cost and abundant natural organic carbon sources were added to make up the solid-phase denitrification filters. This study compared four novel solid-phase carbon-sulfur-based composite filters, and their denitrification abilities were investigated in laboratory-scale bioreactors. The filter F4 (mixture of elemental sulfur powder, shell powder, and peanut hull powder with a mass ratio of 6:2.5:1.5) achieved the highest denitrification ability, with an optimal nitrate removal rate (NRR) of 723 ± 14.2 mg NO3 --N⋅L-1⋅d-1 when the hydraulic retention time (HRT) was 1 h. The HRT considerably impacted effluent quality after coupling of anaerobic ammonium oxidation (ANAMMOX) and solid-phase-based mixotrophic denitrification process (SMDP). The concentration of suspended solids (SS) of the ANAMMOX effluent may affect the performance of the coupled system. Autotrophs and heterotrophs were abundant and co-existed in all reactors; over time, the abundance of heterotrophs decreased while that of autotrophs increased. Overall, the SMDP process showed good denitrification performance and reduced the sulfate productivity in effluent compared to the sulfur-based autotrophic denitrification (SAD) process.

Denitrification performance of sulfur-based autotrophic denitrification and biomass­sulfur-based mixotrophic denitrification in solid-phase denitrifying reactors using novel composite filters.

Both the elemental sulfur-based autotrophic denitrification (ESAD) and the biomass­sulfur-based mixotrophic (simultaneous autotrophic and heterotrophic) denitrification processes (BSMD) are efficient methods for removing nitrate from wastewater. However, a comparative analysis of the denitrification capacity of the BSMD and ESAD in the packed bed reactors is still lacking. In this paper, corncob powder was selected as the biomass source to prepare biomass­sulfur-based composite filter (BSCF) for the BSMD process. The denitrification performances of the three identical lab-scale bioreactors packed with varying elemental sulfur-based composite filters (ESCFs) were compared under varying loading conditions, and the optimal ESCF of the ESAD system was 2:1 by weight ratio of sulfur powder to shell powder. In pilot-scale experiments, the results showed that BSCF could decrease the sulfate productivity and gave better denitrification performance than the ESCF with the optimal nitrate removal rate (NRR) of 504 ± 12.3 mg NO3--N·L-1·d-1. In addition, the two-stage flushing strategy (for the removal of aged sludge) can effectively improve the denitrification capacity, while the denitrification will be inhibited when the influent dissolved oxygen concentration was higher than 4.5 mg L-1. Moreover, the heterotrophs and autotrophs were abundant in the reactors. Over time, the abundance of autotrophs increased while that of heterotrophs decreased. Overall, BSCF could be a promising and economic technology to improve the effluent quality.

Simultaneous shortcut nitrification and denitrification in a hybrid membrane aerated biofilms reactor (H-MBfR) for nitrogen removal from low COD/N wastewater.

The residues of nitrogen contaminants due to insufficient organic carbon sources in sewage has always been the main problem faced by wastewater treatment plants in the process of nitrogen removal. In this study, simultaneous shortcut nitrification and denitrification (SND) was achieved in the hybrid membrane aerated biofilm reactor (H-MBfR) for treating low COD/N ratio (∼x223C 4: 1) wastewater. The effects of the aeration pressure and the influent COD/N ratio in H-MBfR were investigated and further optimized by the response surface methodology (RSM). By controlling the dissolved oxygen to achieve SND, the removal efficiencies of NH4+-N, COD and TN of low COD/N ratio wastewater reached maximum values of 95.52%, 96.61% and 72.23%, respectively. Microbial community analysis showed that the influent COD/N ratio had an obvious influence on the microbial community structure. In particular, ammonia oxidizing bacteria (AOB) and denitrifying bacteria had a good commensalism when the COD/N ratio was 4.3. Compared to control reactor, the analysis of membrane bio-fouling showed that H-MBfR has a lower amount of extracellular polymeric substance (EPS) on membrane and a low concentration of MLSS in bulk liquid, which is helpful for the longer-term operation of H-MBfR.

Exploration and verification of the feasibility of the sulfur-based autotrophic denitrification integrated biomass-based heterotrophic denitrification systems for wastewater treatment: From feasibility to application.

The sulfur-based autotrophic denitrification (SAD) and the solid organic carbon-based denitrification processes are both efficient techniques to remove nitrate from wastewater, and the hydrogen ions generated by the SAD process would be consumed in the heterotrophic denitrification process. Therefore, it is possible to improve the denitrification capacity when the solid organic carbon was added into a SAD reactor. In this study, corncob powder and sawdust powder were selected as solid organic carbon sources, and the sulfur-based autotrophic denitrification integrated biomass-based heterotrophic denitrification system was formed (SBD). The laboratory and field experiments showed that SBD could shorten the start-up period, decrease the sulfate productivity, and maintain a good denitrification performance when treated wastewater. According to the field experiment results, when the HRT was 1 h, the effluent total nitrogen (TN) concentration was always lower than 15 mg L-1. In addition, nitrite inhibition was observed when the concentration of nitrite in the reactors reached above 30 mg L-1. The mixture of elemental sulfur powder, shell powder, corncob powder, and sawdust powder with a mass ratio of 6:2:1:1 was the optimal filter for the SBD system, with an average nitrate reduction rate (NAR) of 420 mg NO3-N·L-1·d-1 obtained at the end of the study. During the whole operation, the major autotrophs in the SBD systems were Thermomonas, Ferritrophicum, and Thiobacillus, while the major heterotrophs were Saprospiraceae, Ferruginibacter, Dokdonella, and Simplicispira. Overall, the SBD system was a feasible and practically favorable way to remove nitrate from wastewater.

Microencapsulated Phase Change Material Suspension for Cold Start of PEMFC.

We added microencapsulated phase change materials (MPCMs) into the homemade antifreeze fluid to take advantage of the latent heat of phase change materials, and explored the possibility of solving the cold start problem of proton exchange membrane fuel cells (PEMFC) with variable specific heat capacity antifreeze. The physical and chemical properties of the MPCMs and their suspensions were tested, and a PEMFC platform for cold start with a thermal management system was established to compare the exothermic performance of MPCS and commercial antifreeze fluid. According to the output voltage, temperature and polarization curves before and after cold start, the MPCMs has a stronger heat transfer capacity than the commercial antifreeze fluid, and the addition of MPCMs can transform the latent heat generated during the phase transition into apparent specific heat capacity, leading to a better solution to the problem of PEMFC cold start.

A novel coupling process with partial nitritation-anammox and short-cut sulfur autotrophic denitrification in a single reactor for the treatment of high ammonium-containing wastewater.

In this study, a novel coupling process with partial nitritation-anaerobic ammonium oxidation (anammox) (PNA) and sulfur autotrophic denitrification (SAD) was studied using an upflow biofilm reactor with mechanical vibration. At a lower dissolved oxygen (DO) concentration (0.40 ±â€¯0.20 mg L-1), ammonia could be efficiently removed from synthetic wastewater by the coupling system with a total nitrogen removal efficiency (NRE) of 98% and an influent NH4+-N concentration of 600 mg L-1. In this system, the nitrate, which was produced during the anammox reaction, could be timely reduced by the SAD reaction. Compared with the conventional PNA and SAD processes, coupling the PNA and SAD processes in a single reactor prevented nitrite accumulation in the SAD reaction and reduced the total sulfate production by 59%. The high-throughput sequencing analysis supported that the SAD bacteria (Thiobacillus) and anammox bacteria (Candidatus Kuenenia) could coexist on the elemental sulfur stone. Additionally, sulfur consumption and sulfate production were increased under a high DO concentration. The sulfate production/nitrate reduction ratio and changing profile of the substrate suggested that the short-cut SAD process mainly occurred in this coupling system. Otherwise, batch experiments also suggested that the nitrite removal rate in the anammox process was 34.5 times higher than that in the SAD process. The outcomes of these experiments revealed that most of the nitrite, as an intermediate product in the SAD reaction, served as an electron acceptor for the anammox reaction. A stoichiometric calculation of this coupling process indicated that the novel reaction scheme with a high NRE was successfully achieved. Under an ideal short-cut SAD process, almost 55% of the sulfur consumption could be reduced in this coupling system. The coupling system provides a new perspective for nitrogen removal in a single reactor and further promotes anammox and SAD performance in wastewater treatment processes.