Submicron Memtransistors Made from Monocrystalline Molybdenum Disulfide.

Multiterminal memtransistors made from two-dimensional (2D) materials have garnered increasing attention in the pursuit of low-power heterosynaptic neuromorphic circuits. However, existing 2D memtransistors tend to necessitate high set voltages (>1 V) or feature defective channels, posing concerns regarding material integrity and intrinsic properties. Herein, we present a monocrystalline monolayer MoS2 memtransistor designed for operation within submicron regimes. Under reverse drain bias sweeps, our experiments reveal memristive behavior within the device, further controllable through modulation of the gate terminal. This controllability facilitates the consistent manifestation of multistate memory effects. Notably, the memtransistor behavior becomes more significant as the channel length diminishes, particularly with channel lengths below 1.6 µm, showcasing an increase in the switching ratio alongside a decrease in the set voltage with the decreasing channel length. Our optimized memtransistor demonstrates the ability to exhibit individual resistance states spanning 5 orders of magnitude, with switching drain voltages of approximately 0.05 V. To elucidate these findings, we investigate hot carrier effects and their interplay with oxide traps within the HfO2 dielectric. This work highlights the importance of memtransisor behavior in highly scaled 2D transistors, particularly those featuring low contact resistances. This understanding holds the potential to tailor memory characteristics essential for the development of energy-efficient neuromorphic devices.

Self-powered broadband photodetection enabled by facile CVD-grown MoS2/GaN heterostructures.

Achieving self-powered photodetection without biasing is a notable challenge for photodetectors. In this work, we demonstrate the successful fabrication of large-scale van der Waals epitaxial molybdenum disulfide (MoS2) on a p-GaN/sapphire substrate using a straightforward chemical vapor deposition (CVD) technique. Our research primarily centers on the characterization of these photodetectors produced through this method. The MoS2/GaN heterojunction photodetector showcases a broad and extensive photoresponse spanning from ultraviolet A (UVA) to near-infrared (NIR). When illuminated by a 532 nm laser, its self-powered photoresponse is characterized by a rise time (τr) of ∼18.5 ms and a decay time (τd) of ∼123.2 ms. The photodetector achieves a responsivity (R) of ∼0.13 A W-1 and a specific detectivity (D*) of ∼3.8 × 1010 Jones at zero bias. Additionally, while utilizing a 404 nm laser, the photodetector reaches a maximum R and D* of ∼1.7 × 104 A/W and ∼1.6 × 1013 Jones, respectively, at Vb = 5 V. The operational mechanism of the device can be explained by the diode characteristics involving a tunneling current in the presence of reverse bias. The exceptional performance of these photodetectors can be attributed to the pristine interface between the CVD-grown MoS2 and GaN, providing an impeccably clean tunneling surface. Additionally, our investigation has unveiled that MoS2/GaN heterostructure photodetectors, featuring MoS2 coverage percentages spanning from 20% to 50%, exhibit improved responsivity capabilities at an external bias voltage. As a result, this facile CVD growth technique for MoS2 photodetectors holds significant potential for large-scale production in the manufacturing industry.

Dual-mode frequency multiplier in graphene-base hot electron transistor.

Since quantum computers have been gradually introduced in countries around the world, the development of the many related quantum components that can operate independently of temperature has become more important for enabling mature products with low power dissipation and high efficiency. As an alternative to studying cryo-CMOSs (complementary metal-oxide-semiconductors) to achieve this goal, quantum tunneling devices based on 2D materials can be examined instead. In this work, a vertical graphene-based quantum tunneling transistor has been used as a frequency modulator. The transistor can operate via different quantum tunneling mechanisms and generates, by applying the appropriate bias, voltage-resistance curves characteristic of variable nonlinear resistance for both base and emitter voltages. We experimentally demonstrate frequency modulation from input signals over the range of 100 kHz to 10 MHz, enabling a tunable frequency doubler or tripler in just a single transistor. This frequency multiplication with a tunneling mechanism makes the graphene-based tunneling device a promising option for frequency electronics in the emerging field of quantum technologies.

High-Frequency Graphene Base Hot-Electron Transistor.

The integration of graphene and other two-dimensional (2D) materials with existing silicon semiconductor technology is highly desirable. This is due to the diverse advantages and potential applications brought about by the consequent miniaturization of the resulting electronic devices. Nevertheless, such devices that can operate at very high frequencies for high-speed applications are eminently preferred. In this work, we demonstrate a vertical graphene base hot-electron transistor that performs in the radio frequency regime. Our device exhibits a relatively high current density (∼200 A/cm2), high common base current gain (α* ∼ 99.2%), and moderate common emitter current gain (ß* ∼ 2.7) at room temperature with an intrinsic current gain cutoff frequency of around 65 GHz. Furthermore, cutoff frequency can be tuned from 54 to 65 GHz by varying the collector-base bias. We anticipate that this proposed transistor design, built by the integrated 2D material and silicon semiconductor technology, can be a potential candidate to realize extra fast radio frequency tunneling hot-carrier electronics.

Responsivity and detectivity enhancements by graphene overlay on normal-incident multicolor quantum grid infrared photodetectors.

An efficient and effective method to achieve high responsivity and specific detectivity, particularly for normal-incident quantum well infrared photodetectors (QWIPs), is proposed in this study. By combining superlattice (SL) structure, grating structures, and graphene monolayer onto traditional QWIP designs, a graphene-covered multicolor quantum grid infrared photodetector (QGIP) with improved optoelectrical properties is developed. The enhancements of the device's responsivity and specific detectivity are about 7-fold and 20-fold, respectively, which resulted from an increase in the charge depletion region and the generation of extra photoelectrons due to graphene-semiconductor heterojunction. This method provides a potential candidate for future high-performance photodetectors.