ABSTRACT
With the increasing awareness of environmental protection, the demand for eco-friendly bio-derived flame-retardant for textiles has received increasing attention. In this work, a fully bio-derived phosphorylated furan-based flame retardant (FAP) was synthesized by the Schiff reaction of furan-based compounds (furfural and furfurylamine). To evaluate the application scope and flame retardant efficiency of FAP, cotton fabrics and PLA nonwovens were selected as biomass-based representatives of natural fiber materials and synthetic fiber materials, respectively. Significantly, based on the composition of furan ring, phosphorus and nitrogen containing components of FAP, excellent charring and flame retardant properties of coated cotton fabrics and PLA nonwovens can be expected. TGA results showed that the residual char of C-FAP-3 and P-FAP-3 were 39.7% (increased by 267.6%) and 16.7% (increased by 215.1%), respectively, higher than those of control cotton (10.8%) and PLA nonwoven (5.3%). Cone test results exhibited that the peak heat release rate (PHRR) and total heat release (THR) values of C-FAP-3 were sharply decreased by 69.4% and 37.8%, respectively. P-FAP-3 also displayed a significant reduction in PHRR, implying high flame retardancy of C-FAP-3 and P-FAP-3. Notably, through the weight gains of FAP coating on cotton and PLA as well as the final LOI and VBT results of the flame retardant treated fabrics, it can be preliminarily inferred that control cotton fabrics are more likely to achieve better flame retardant effects than PLA. Additionally, the facile synthetic strategy of fully bio-derived flame retardants is expected to promote the development of green flame retardant strategies for high-performance textiles.
Subject(s)
Flame Retardants , Biomass , Furans , Furaldehyde , Gossypium , PolyestersABSTRACT
Cellulosic aerogels (CNF) are considered naturally available thermal insulating materials as substitutes for conventional polymeric aerogels owing to their extensive sources, low density, low thermal conductivity, sustainability and biodegradability. However, cellulosic aerogels suffer from high flammability and hygroscopicity. In this work, a novel P/N-containing flame retardant (TPMPAT) was synthesized to modify cellulosic aerogels to improve their anti-flammability. TPMPAT/CNF aerogels were further modified by polydimethylsiloxane (PDMS) to enhance the water-proof characteristics. Although the addition of TPMPAT and/or PDMS slightly increased the density and thermal conductivity of the composite aerogels, those values were still comparable to the commercial polymeric aerogels. Compared with pure CNF aerogel, the cellulose aerogel modified by TPMPAT and/or PDMS had higher T-10%, T-50% and Tmax, which indicated that the modified cellulose aerogels have better thermal stability. TPMPAT modification made CNF aerogels highly hydrophilic, while TPMPAT/CNF aerogel modified by PDMS became a highly hydrophobic material with a water contact angle (WCA) of 142°. Pure CNF aerogel burned rapidly after ignition, showing a low limiting oxygen index (LOI) of 23.0% and no UL-94 grade. In contrast, both TPMPAT/CNF-30% and PDMS-TPMPAT/CNF-30% showed self-extinction behaviors with a UL-94 V-0 grade, implying high fire resistance. Combined with high anti-flammability and hydrophobicity, the ultra-light-weight cellulosic aerogels show great potential for thermal insulation applications.
Subject(s)
Cellulose , Fires , Dimethylpolysiloxanes , Polymers , WaterABSTRACT
The facile construction of a cotton fabric with excellent flame-retardant and water-proof abilities is of great interest for multitask requirements. Herein, a nonfluorine, highly efficient, and cost-effective multifunctional cotton fabric was fabricated via sequentially depositing a novel multielement-containing flame-retardant phosphorylated octa-aminopropyl POSS (PPA-POSS) and a fluorine-free superhydrophobic coating of zeolitic imidazolate framework-67@poly(dimethylsiloxane) (ZIF-67@PDMS). Influences of the PPA-POSS concentration and ZIF-67@PDMS formula on the fire retardancy and water repellency of treated cotton were systematically investigated. The optimized flame-retardant sample CTF3 with 6.2 wt % PPA-POSS exhibited a high limiting oxygen index (LOI) of 34% and self-extinguishing ability. CTF3 was further modified with a properly formulated superhydrophobic ZIF-67@PDMS coating. CTF3-PHB2 displayed enhanced thermal stability, flame retardancy, and outstanding superhydrophobicity. Thermogravimetric analysis (TGA) results demonstrated that CTF3-PHB2 presented a high char residue of 35.9%, which was 220.5% higher than that of the control cotton (11.2%). More importantly, the heat release rate (HRR), total heat release (THR), and average effective heat of combustion (av-EHC) values of CTF3-PHB2 were significantly reduced by 51.4, 56.2, and 68.4%, respectively, compared with those of a pure cotton fabric. Moreover, CTF3-PHB2 showed superhydrophobicity (WCA > 159.3°) and good mechanical abrasion resistance. In addition, CTF3-PHB2 also showed protective abilities such as antifouling, self-cleaning, and water/oil separation performances even for strong acid/alkali mixtures. Thereby, it is believed that the PPA-POSS@ZIF-67@PDMS coating is promising for application in multifunctional textile materials.
ABSTRACT
Introduction: The seed weight of soybean [Glycine max (L.) Merr.] is one of the major traits that determine soybean yield and is closely related to seed size. However, the genetic basis of the synergistic regulation of traits related to soybean yield is unclear. Methods: To understand the molecular genetic basis for the formation of soybean yield traits, the present study focused on QTLs mapping for seed size and weight traits in different environments and target genes mining. Results: A total of 85 QTLs associated with seed size and weight traits were identified using a recombinant inbred line (RIL) population developed from Guizao1×B13 (GB13). We also detected 18 environmentally stable QTLs. Of these, qSL-3-1 was a novel QTL with a stable main effect associated with seed length. It was detected in all environments, three of which explained more than 10% of phenotypic variance (PV), with a maximum of 15.91%. In addition, qSW-20-3 was a novel QTL with a stable main effect associated with seed width, which was identified in four environments. And the amount of phenotypic variance explained (PVE) varied from 9.22 to 21.93%. Five QTL clusters associated with both seed size and seed weight were summarized by QTL cluster identification. Fifteen candidate genes that may be involved in regulating soybean seed size and weight were also screened based on gene function annotation and GO enrichment analysis. Discussion: The results provide a biologically basic reference for understanding the formation of soybean seed size and weight traits.
