Accuracy analysis of robotic-assisted immediate implant placement: A retrospective case series.

OBJECTIVES: This study aimed to investigate the accuracy of a robotic computer-assisted implant surgery (r-CAIS) for immediate implant placement. METHODS: Patients requiring immediate implant placement in the maxillary anterior region were enrolled for r-CAIS. Before surgery, the patients underwent a cone beam computed tomography (CBCT) scan with a positioning marker. Virtual implant placement position and drilling sequences were planned. Following spatial registration and calibration, the implants were placed with the robotic system under supervision. A postoperative CBCT was taken to control the actual implant positions. The DICOM data of the virtually planned and the actually placed implant were superimposed and registered through the accuracy verification software of the robotic system. The accuracy was calculated automatically. The deviation at the mesial-distal, labial-palatal, and apico-coronal directions were recorded. RESULTS: Fifteen patients with 20 implants were included. No adverse surgical events or postoperative complications were reported. The global platform, apex, and angular deviation were 0.75 ± 0.20 mm (95 % CI: 0.65 to 0.84 mm), 0.70 ± 0.27 mm (95 % CI: 0.57 to 0.82 mm), and 1.17 ± 0.73° (95 % CI: 0.83 to 1.51°), respectively. Moreover, the vertical platform and apex deviation were 0.50 ± 0.31 mm, (95 % CI: 0.35 to 0.64 mm) and 0.48 ± 0.32 mm, (95 % CI: 0.33 to 0.63 mm), respectively. All the placed implant positions were further labial and apical than the planned ones, respectively. CONCLUSIONS: High accuracy of immediate implant placement was achieved with the robotic system. CLINICAL SIGNIFICANCE: Our study provided evidence to support the potential of the robotic system in implant placement, even in challenging scenarios.

Ptip safeguards the epigenetic control of skeletal stem cell quiescence and potency in skeletogenesis.

Stem cells remain in a quiescent state for long-term maintenance and preservation of potency; this process requires fine-tuning regulatory mechanisms. In this study, we identified the epigenetic landscape along the developmental trajectory of skeletal stem cells (SSCs) in skeletogenesis governed by a key regulator, Ptip (also known as Paxip1, Pax interaction with transcription-activation domain protein-1). Our results showed that Ptip is required for maintaining the quiescence and potency of SSCs, and loss of Ptip in type II collagen (Col2)+ progenitors causes abnormal activation and differentiation of SSCs, impaired growth plate morphogenesis, and long bone dysplasia. We also found that Ptip suppressed the glycolysis of SSCs through downregulation of phosphoglycerate kinase 1 (Pgk1) by repressing histone H3K27ac at the promoter region. Notably, inhibition of glycolysis improved the function of SSCs despite Ptip deficiency. To the best of our knowledge, this is the first study to establish an epigenetic framework based on Ptip, which safeguards skeletal stem cell quiescence and potency through metabolic control. This framework is expected to improve SSC-based treatments of bone developmental disorders.

Ptip is essential for tooth development via regulating Wnt pathway.

OBJECTIVE: Epigenetic regulation plays important role in stem cell maintenance. Ptip was identified as epigenetic regulator, but the role in dental progenitor cells remains unclear. SUBJECTS AND METHODS: Dental mesenchymal progenitor cells were targeted by Sp7-icre and visualized in mTmG; Sp7-icre mice. The Ptipf/f ; Sp7-icre mice were generated and the phenotype of incisors and molars were shown by micro-computerized tomography, scanning electron microscope, hematoxylin & eosin staining, and immunofluorescence. Dental mesenchymal progenitor cells were sorted by fluorescence-activated cell sorting from lower incisors and RNA sequencing was performed. RESULTS: The Sp7-icre targets dental mesenchymal progenitor cells in incisors and molars. The Ptipf/f ; Sp7-icre mice showed spontaneous fractures in the cusp of upper incisors and lower incisors at 3 weeks (w), compensative overgrowth of lower incisors at 1 month (M), and overgrowth extended to the outside at 2 M. The molars showed shortened roots. The functions of odontoblasts and dental mesenchymal progenitor cells were impaired. Mechanically, loss of Ptip activates the Wnt pathway and upregulates the expression of Wls in dental mesenchymal progenitor cells. Also, the regenerative ability of lower incisors was significantly impaired. CONCLUSION: We first demonstrated that Ptip was crucial for tooth development via regulating Wnt signaling.

Ckip-1 regulates C3H10T1/2 mesenchymal cell proliferation and osteogenic differentiation via Lrp5.

Casein kinase-2 interaction protein-1 (Ckip-1) is a negative regulator of bone formation. The identification of novel Ckip-1-related targets and their associated signaling pathways that regulate mesenchymal stem cell (MSC) osteogenic differentiation is required. The present study aimed to evaluate the effects of Ckip-1 knockdown on C3H10T1/2 MSC proliferation and osteogenic differentiation, and to explore the role of the canonical Wnt-signaling receptor Lrp5. Ckip-1-knockdown (shCkip-1), Ckip-1-overexpression (Ckip-1) and their corresponding control [shCtrl and empty vector (EV), respectively] cell groups were used in the present study. Immunofluorescence localization of Ckip-1 was observed. The expression of the key molecules of the canonical Wnt signaling pathway was examined in C3H10T1/2 cells following osteogenic induction. Moreover, the effects of Lrp5 knockdown in the presence or absence of Ckip-1 knockdown were examined on C3H10T1/2 cell proliferation and osteogenic differentiation. The results indicated an increase in cell proliferation and osteogenic differentiation in the shCkip-1 group compared with the shCtrl group. The expression levels of LDL receptor related protein 5 (Lrp5), lymphoid enhancer binding factor 1 (Lef1) and transcription factor 1 in C3H10T1/2 cells were significantly increased in shCkip-1 cells following 7-day osteoinduction compared with shCtrl cells. Moreover, the involvement of Lrp5 in shCkip-1-induced osteogenic differentiation of C3H10T1/2 cells was further verified. The results indicated that Ckip-1 reduced C3H10T1/2 MSC proliferation and osteogenic differentiation via the canonical Wnt-signaling receptor Lrp5, which is essential for the improvement of bone tissue engineering.

Leukemogenic Chromatin Alterations Promote AML Leukemia Stem Cells via a KDM4C-ALKBH5-AXL Signaling Axis.

N6-methyladenosine (m6A) is a commonly present modification of mammalian mRNAs and plays key roles in various cellular processes. m6A modifiers catalyze this reversible modification. However, the underlying mechanisms by which these m6A modifiers are regulated remain elusive. Here we show that expression of m6A demethylase ALKBH5 is regulated by chromatin state alteration during leukemogenesis of human acute myeloid leukemia (AML), and ALKBH5 is required for maintaining leukemia stem cell (LSC) function but is dispensable for normal hematopoiesis. Mechanistically, KDM4C regulates ALKBH5 expression via increasing chromatin accessibility of ALKBH5 locus, by reducing H3K9me3 levels and promoting recruitment of MYB and Pol II. Moreover, ALKBH5 affects mRNA stability of receptor tyrosine kinase AXL in an m6A-dependent way. Thus, our findings link chromatin state dynamics with expression regulation of m6A modifiers and uncover a selective and critical role of ALKBH5 in AML that might act as a therapeutic target of specific targeting LSCs.

Effects of micro/nano strontium-loaded surface implants on osseointegration in ovariectomized sheep.

BACKGROUND: Poor osseointegration of dental implants often occurs in osteoporotic patients and processed implant surfaces could help to improve the dilemma. PURPOSE: This study aimed to compare the effects of different titanium (Ti) surfaces on bone-implant osseointegration in ovariectomized (OVX) sheep. MATERIALS AND METHODS: Four groups were included: smooth titanium (ST) was merely polished Ti; micro titanium (MT) was treated with hydrofluoric acid (HF) for 30 minutes; strontium-loaded nano titanium (NT-Sr) was formed by magnetron sputtering; strontium-loaded micro/nano titanium (MNT-Sr) was fabricated by HF etching combined with magnetron sputtering. The biological responses were evaluated by human bone marrow-derived mesenchymal stem cells (hBMMSCs) experiments in vitro. Osseointegration was evaluated in vivo after each surface implant was inserted into OVX sheep' mandibles. RESULTS: The numbers of adhered and mineralized hBMMSCs increased significantly in the MNT-Sr group. The bone-implant contact and the maximal pull-out force increased significantly with MNT-Sr surface. The bone volume ratio and trabecular number of the MNT-Sr group were significantly higher than others, whereas trabecular separation decreased. CONCLUSIONS: These results indicated that an MNT-Sr surface promotes the differentiation of hBMMSCs in vitro and enhances bone-implant osseointegration in vivo, which may be a promising option for clinical implants in osteoporotic patients.

Pretreated Macrophage-Membrane-Coated Gold Nanocages for Precise Drug Delivery for Treatment of Bacterial Infections.

Pathogenic bacterial infections and drug resistance make it urgent to develop new antibacterial agents with targeted delivery. Here, a new targeting delivery nanosystem is designed based on the potential interaction between bacterial recognizing receptors on macrophage membranes and distinct pathogen-associated molecular patterns in bacteria. Interestingly, the expression of recognizing receptors on macrophage membranes increases significantly when cultured with specific bacteria. Therefore, by coating pretreated macrophage membrane onto the surface of a gold-silver nanocage (GSNC), the nanosystem targets bacteria more efficiently. Previously, it has been shown that GSNC alone can serve as an effective antibacterial agent owing to its photothermal effect under near-infrared (NIR) laser irradiation. Furthermore, the nanocage can be utilized as a delivery vehicle for antibacterial drugs since the gold-silver nanocage presents a hollow interior and porous wall structure. With significantly improved bacterial adherence, the Sa-M-GSNC nanosystem, developed within this study, is effectively delivered and retained at the infection site both via local or systemic injections; the system also shows greatly prolonged blood circulation time and excellent biocompatibility. The present work described here is the first to utilize bacterial pretreated macrophage membrane receptors in a nanosystem to achieve specific bacterial-targeted delivery, and provides inspiration for future therapy based on this concept.

Osteogenic activity of titanium surfaces with hierarchical micro-/nano-structures obtained by hydrofluoric acid treatment.

An easier method for constructing the hierarchical micro-/nano-structures on the surface of dental implants in the clinic is needed. In this study, three different titanium surfaces with microscale grooves (width 0.5-1, 1-1.5, and 1.5-2 µm) and nanoscale nanoparticles (diameter 20-30, 30-50, and 50-100 nm, respectively) were obtained by treatment with different concentrations of hydrofluoric acid (HF) and at different etching times (1%, 3 min; 0.5%, 12 min; and 1.5%, 12 min, respectively; denoted as groups HF1, HF2, and HF3). The biological response to the three different titanium surfaces was evaluated by in vitro human bone marrow-derived mesenchymal stem cell (hBMMSC) experiments and in vivo animal experiments. The results showed that cell adhesion, proliferation, alkaline phosphatase activity, and mineralization of hBMMSCs were increased in the HF3 group. After the different surface implants were inserted into the distal femurs of 40 rats, the bone-implant contact in groups HF1, HF2, and HF3 was 33.17%±2.2%, 33.82%±3.42%, and 41.04%±3.08%, respectively. Moreover, the maximal pullout force in groups HF1, HF2, and HF3 was 57.92±2.88, 57.83±4.09, and 67.44±6.14 N, respectively. The results showed that group HF3 with large micron grooves (1.5-2.0 µm) and large nanoparticles (50-100 nm) showed the best bio-functionality for the hBMMSC response and osseointegration in animal experiments compared with other groups.