Prediction of freshwater ecotoxicological hazardous concentrations of major surfactants using the QSAR-ICE-SSD method.

Synthetic surfactant products are continuously released into the aquatic environment in large quantities, posing a burden on ecosystems as a "pseudo-persistent" organic pollutant. Threshold derivation for protecting aquatic ecosystems is challenging due to the various homologous components of surfactants. In this study, five commercially available products were chosen as representative major types of surfactants. Corresponding quantitative structure-activity relationships (QSAR) were screened and subsequently combined with interspecific correlation estimation (ICE) to develop species sensitivity distributions (SSDs) for each component. Then, the 5th percentile hazard concentrations (HC5s) were calculated. The results indicated that the developed QSAR-ICE models demonstrated good toxicity prediction performance. The HC5 of each component showed a negatively correlation with alkyl chain length and a positive correlation with the amount of ethylene oxide. The HC5s of surfactants correlate with variations in their charged properties. Quaternary ammonium compounds (QAC) exhibited the lowest HC5s (8.5 ± 18.3 µg/L), followed by alcohol ethoxylates (AE), linear alkylbenzene sulfonates (LAS), and alcohol ethoxylated sulfates (AES); and alkyl oxide (AO) exhibited the highest HC5s (15784.2 ± 21552.6 µg/L). For cationic surfactants, the HC5s in the invertebrates were significantly lower than those in the fish; conversely, for anionic surfactants, the opposite was true, indicating a difference in the toxic mechanisms of surfactants with different charged properties across species taxa. Additionally, among invertebrates, shellfish demonstrated heightened sensitivity to surfactants, owing to their high accumulation and low metabolism of pollutants. Salmoniformes were the most sensitive among all species, indicating the necessity of prioritizing these species for aquatic ecological conservation in surfactant-contaminated waters.

Research progress on occurrence characteristics and source analysis of microfibers in the marine environment.

Synthetic microfiber pollution is a growing concern in the marine environment. However, critical issues associated with microfiber origins in marine environments have not been resolved. Herein, the potential sources of marine microfibers are systematically reviewed. The obtained results indicate that surface runoffs are primary contributors that transport land-based microfibers to oceans, and the breakdown of larger fiber plastic waste due to weathering processes is also a notable secondary source of marine microfibers. Additionally, there are three main approaches for marine microplastic source apportionment, namely, anthropogenic source classification, statistical analysis, and numerical simulations based on the Lagrangian particle tracking method. These methods establish the connections between characteristics, transport pathways and sources of microplastics, which provides new insights to further conduct microfiber source apportionment. This study helps to better understand sources analysis and transport pathways of microfibers into oceans and presents a scientific basis to further control microfiber pollution in marine environments.

The occurrence, sources, and health risks of substituted polycyclic aromatic hydrocarbons (SPAHs) cannot be ignored.

Similar to parent polycyclic aromatic hydrocarbons (PPAHs), substituted PAHs (SPAHs) are prevalent in the environment and harmful to humans. However, they have not received much attention. This study investigated the occurrence, distribution, and sources of 10 PPAHs and 15 SPAHs in soil, water, and indoor and outdoor PM2.5 and dust in high-exposure areas (EAH) near industrial parks and low-exposure areas (EAL) far from industrial parks. PAH pollution in all media was more severe in the EAH than in the EAL. All SPAHs were detected in this study, with alkylated and oxygenated PAHs being predominant. Additionally, 3-OH-BaP and 1-OH-Pyr were detected in all dust samples in this study, and 6-N-Chr, a compound with carcinogenicity 10 times higher than that of BaP, was detected at high levels in all tap water samples. According to the indoor-outdoor ratio, PAHs in indoor PM2.5 in the EAH mainly originated from indoor pollution sources; however, those in the EAL were simultaneously affected by indoor-outdoor air exchange and indoor sources. Most target PAHs tended to deposit from air to dust, and this tendency was significantly negatively associated with the octanol-air partitioning coefficient of PAHs. SPAHs in the environment are primarily derived from the petroleum industry and the mixed combustion of gasoline, biomass, and coal. The toxicity equivalence factors of SPAHs were predicted using QSAR models to assess their lifetime carcinogenic risk (ILCR). The ILCRtotal from PAHs for adults in the EAH was >10-4. Though the levels of 6-N-Chr and 1-Me-Pyr in the environment were markedly lower than those of PPAHs, their ILCRs from PM2.5 inhalation and dermal contact with water exceeded 10-6. This study is significant for recognizing and controlling the health risks associated with SPAHs in humans.

Bioaccessibility of polypropylene microfiber-associated tetracycline and ciprofloxacin in simulated human gastrointestinal fluids.

Microplastics residues in natural waters can adsorb organic contaminants owing to their rough surface morphology and high specific surface area, potentially harming human health when ingested. Although humans inevitably ingest microplastics, the bioaccessibility of microplastic-associated chemicals in the human gastric and intestinal fluids remains unresolved. This study investigated the mechanism and primary factor controlling the bioaccessibility of polypropylene (PP) microplastic fiber-associated tetracycline (TC) and ciprofloxacin (CIP) in simulated human gastrointestinal fluids. After mixing 0.1 g of PP microfiber with 10 mg/L of TC (or CIP) for 96 h and exposure to simulated human gastrointestinal fluids, the TC concentrations were 0.440, 0.678, and 1.840 mg/L and the CIP concentrations were 0.700, 1.367, and 3.281 mg/L CIP in the simulated human saliva, gastric, and intestinal fluids after incubation for 60 s, 4 h, and 8 h, respectively. This indicated that the antibiotics TC and CIP adsorbed onto microfiber surface are readily released into human gastrointestinal fluids upon ingestion. Gastric and intestinal fluids showed enhanced bioaccessibility to TC/CIP adhered to PP microfiber. The primary factors affecting the bioaccessibility to TC/CIP adhered to PP microfiber surfaces were found to be pepsin in human gastric fluid and trypsin in human intestinal fluid. Molecular docking and simulated molecular dynamic analyses results showed that pepsin and trypsin stablish connections with TC via hydrogen bonds (reaction sites: pepsin TC: T139, T136, S97, D94, D277 and Y251; trypsin TC: S257, H120, K235, G274, and G276) and CIP via hydrophobic interactions (reaction sites: pepsin CIP: Y137, T136, T139, F173, I362, V353, and I275; trypsin CIP: W273, I161, C253, and C277). Our findings highlight that microplastic ingestion increases the risk of microplastics and the co-contaminants adsorbed to human health; thus, these findings are helpful to assess the risk of microplastics and co-contaminants to human health.

Size-dependent long-term weathering converting floating polypropylene macro- and microplastics into nanoplastics in coastal seawater environments.

In this study, we systematically developed the long-term photoaging behavior of different-sized polypropylene (PP) floating plastic wastes in a coastal seawater environment. After 68 d of laboratory accelerated UV irradiation, the PP plastic particle size decreased by 99.3 ± 0.15%, and nanoplastics (average size: 435 ± 250 nm) were produced with a maximum yield of 57.9%, evidencing that natural sunlight irradiation-induced long-term photoaging ultimately converts floating plastic waste in marine environments into micro- and nanoplastics. Subsequently, when comparing the photoaging rate of different sized PP plastics in coastal seawater, we discovered that large sized PP plastics (1000-2000 and 5000-7000 µm) showed a lower photoaging rate than that of small sized PP plastic debris (0-150 and 300-500 µm), with the decrease rate of plastic crystallinity as follow: 0-150 µm (2.01 d-1) > 300-500 µm (1.25 d-1) > 1000-2000 µm (0.780 d-1) and 5000-7000 µm (0.900 d-1). This result can be attributed to the small size PP plastics producing more reactive oxygen species (ROS) species, with the formation capacity of hydroxyl radical •OH as follows: 0-150 µm (6.46 × 10-15 M) > 300-500 µm (4.87 × 10-15 M) > 500-1000 (3.61 × 10-15 M) and 5000-7000 µm (3.73 × 10-15 M). The findings obtained in this study offer a new perspective on the formation and ecological risks of PP nanoplastics in current coastal seawater environments.

Integrating Physiologically Based Pharmacokinetic Modeling-Based Forward Dosimetry and in Vitro Bioassays to Improve the Risk Assessment of Organophosphate Esters on Human Health.

The ability to accurately assess the health risks of contaminants is limited by the shortcomings of toxicological standards. Using organophosphate esters (OPEs) as an example, this study attempted to integrate physiologically based pharmacokinetic (PBPK)-based forward dosimetry and in vitro bioassays to assess the likelihood of contaminants inducing biological effects in humans. The total exposure level of OPEs for Chinese residents was 19.5 ± 8.71 ng/kg/day with inhalation being the main exposure pathway. Then, human PBPK models were developed for individual OPEs to predict their steady-state concentrations in human tissues, and the predicted median levels in blood were close to the measurements. The reference doses (RfDs) of OPEs based on in vitro bioassays were comparable to in vivo animal-derived RfDs, demonstrating the reliability of in vitro bioassays. Therefore, the likelihood of OPEs inducing bioactivities in humans (RQin-vitro) was calculated using in vitro toxicity data and OPE levels in human tissues. The RQin-vitros of tris(2-chloroisopropyl) phosphate, tris(1,3-dichloropropyl) phosphate, and triphenyl phosphate (7.68 × 10-5-3.18 × 10-3) were comparable to the risks assessed using traditional RfDs (5.22 × 10-5-1.94 × 10-3), indicating the credibility of the method proposed in this study. This study establishes a new framework to improve the health risk assessment of contaminants without sufficient toxicity data and minimize the need for animal experimentation.

Water quality criteria and ecological risk assessment of lead (Pb) in China considering the total hardness of surface water: A national-scale study.

Site-specific water quality criteria considering hydrochemical conditions are needed for zoning control of environmental risks. However, the differences in water quality parameters between regions have not been fully considered in the current research on water quality criteria and risk assessment of lead. In this study, lead concentration and total hardness (TH) data of surface water in 13 major river basins and 31 administrative regions in China were collected. Based on the normalization of the TH of the toxicity data, the short-term and long-term water quality criteria of lead in China's surface water in the specific TH condition (100 mg/L) were derived using the species sensitivity distribution method, which were 90.7 µg/L and 2.1 µg/L, respectively. Furthermore, this study provided general derivation formulas for the water quality criteria based on the TH of surface water and obtained the site-specific criteria for different regions/basins in China. On this basis, an ecological risk assessment considering the TH was proposed for the first time. The results showed that there was a clear risk of lead in the Pearl River Basin and the rivers in Zhejiang-Fujian. The southern coastal provinces were at an unacceptable risk level, although the lead concentrations in the surface water were medium; the opposite was true in northern China, which meant that a high concentration of lead did not necessarily pose a high ecological risk and about 25 % of the variation in the predicted risk can be explained by the TH in Monte Carlo simulation.

Wastewater treatment plants act as essential sources of microplastic formation in aquatic environments: A critical review.

According to extensive in situ investigations, the microplastics (MPs) determined in current wastewater treatment plants (WWTPs) are mostly aged, with roughened surfaces and varied types of oxygen-containing functional groups (i.e., carbonyl and hydroxyl). However, the formation mechanism of aged MPs in WWTPs is still unclear. This paper systematically reviewed MP fragmentation and generation mechanisms in WWTPs at different treatment stages. The results highlight that MPs are prone to undergo physical abrasion, biofouling, and chemical oxidation-associated weathering in WWTPs at different treatment stages and can be further decomposed into smaller secondary MPs, including in nanoplastics (less than 1000 nm or 100 nm in size), suggesting that WWTPs can act as a formation source for MPs in aquatic environments. Sand associated mechanical crashes in the primary stage, microbes in active sewage sludge-related biodegradation in the secondary stage, and oxidant-relevant chemical oxidation processes (light photons, Cl2, and O3) in the tertiary stage are the dominant causes of MP formation in WWTPs. For MP formation mechanisms in WWTPs, external environmental forces (shear and stress forces, UV radiation, and biodegradation) can first induce plastic chain scission, destroy the plastic molecular arrangement, and create abundant pores and cracks on the MP surface. Then, the physicochemical properties (modulus of elasticity, tensile strength and elongation at break) of MPs shift consequently and finally breakdown into smaller secondary MPs or nanoscale plastics. Overall, this review provides new insights to better understand the formation mechanism, occurrence, fate, and adverse effects of aged microplastics/nanoplastics in current WWTPs.

Solid-solid synthesis of covalent organic framework as a support for growth of controllable ultrafine Au nanoparticles.

Covalent organic frameworks (COFs) are promising supports for the synthesis of noble metal nanoparticles (NM NPs) with controllable sizes and dispersities. However, it is still challenging to synthesize COFs using green and efficient routes. Herein, COFs (TpMA) were prepared by ball milling, which required less solvent and time. They were then used as a support for the growth of ultrafine Au NPs. Using the COFs as supports, five size-controlled ultrafine Au NPs (2.5 ± 0.55- 4.32 ± 1.39 nm) were synthesized (Au@TpMA). It was found that the Au NPs exhibited remarkable dispersibility owing to the support of TpMA. The reduction of 4-nitrophenol to 4-aminophenol was used as a model reaction to evaluate the performance of the Au@TpMA catalyst, which showed excellent catalytic activity for the reduction of 4-nitrophenol. The Au@TpMA catalyst exhibited good stability and recyclability, and the reduction rate was 95% at the end of six successive experiments. In addition, in the presence of the Au@TpMA catalyst, the maximum pseudo-first-order reaction rate constant of 4-nitrophenol was 0.2379 min-1. From the results of this study, we hope that using COFs-based supports prepared by ball milling for the size-controlled synthesis of NM NPs provides a path forward for the mechanical synthesis of other COFs.

A comparative study on aggregation and sedimentation of natural goethite and artificial Fe3O4 nanoparticles in synthetic and natural waters based on extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory and molecular dynamics simulations.

Natural iron oxides nanomaterials have important roles in biogeochemical processes. In this study, the effects of pH, natural organic matter, and cations on aggregation and sedimentation of natural goethite and artificial Fe3O4 nanoparticles in water were investigated to learn more about the environmental behaviors of engineered and natural nanomaterials and how they differ. In addition, a novel extended DLVO theory that considered steric, gravitational, and magnetic attraction forces concurrently was specifically developed to provide mechanisms explanations. Specifically, Fe3O4 NPs were more likely than bulk goethite to aggregate (because of magnetic attraction interactions) at low HA concentrations and disperse at high HA concentrations. Besides, goethite was less prone to settle with the same concentration of NaCl than Fe3O4 NPs, but the opposite trend was found for the same concentration of CaCl2 because of the difference in maximum net energy (barrier) and strong Ca2+ bridging effectiveness of goethite in CaCl2 solution. Statistical models were established to evaluate colloidal stability of the particles. XPS and molecular dynamics simulation results suggested that ions were adsorbed onto particles via ionic polarization and that the binding free energies at high coverage followed the order Ca2+ > Na+ > Cl- and presence of cation bridging between particles.

Application of combined QSAR-ICE models in calculation of hazardous concentrations for linear alkylbenzene sulfonate.

Linear alkylbenzene sulfonate (LAS) is a widely used anionic surfactant that exists as a mixture of various homologous structures in water environment. In the calculation of hazardous concentrations of LAS, cross-taxonomies toxicity estimation was often used instead of species-level-specific estimation for the normalization of toxicity data, which led to substantial uncertainties. In this study, combined quantitative structure-activity relationship (QSAR) and interspecific relationship estimation (ICE) models were developed to normalize the alkyl chain length of toxicity data and calculate the 5th percentile hazard concentrations (HC5s) of LAS. Using seven acute QSAR models based on measured data and 29 acute QSAR-ICE models derived from them, the acute HC5s of LAS were calculated as 2.09-3.67 mg/L. Furthermore, species- and family-level-specific QSAR and QSAR-ICE models were used to calculate chronic HC5s (0.19-0.38 mg/L). Additionally, the sensitivity of biological toxicity to the hydrophobicity of LAS, represented by the slope of the QSAR models, had a significant correlation with the taxa of the species. Further risk assessment based on chronic HC5s showed potential ecological risks in the Dianchi Lake basin and Haihe River basin in China, which should cause concern.

Enlightenment from the COVID-19 Pandemic: The Roles of Environmental Factors in Future Public Health Emergency Response.

The coronavirus disease 2019 (COVID-19) pandemic is challenging the current public health emergency response systems (PHERSs) of many countries. Although environmental factors, such as those influencing the survival of viruses and their transmission between species including humans, play important roles in PHERSs, little attention has been given to these factors. This study describes and elucidates the roles of environmental factors in future PHERSs. To improve countries' capability to respond to public health emergencies associated with viral infections such as the COVID-19 pandemic, a number of environmental factors should be considered before, during, and after the responses to such emergencies. More specifically, to prevent pandemic outbreaks, we should strengthen environmental and wildlife protection, conduct detailed viral surveillance in animals and hotspots, and improve early-warning systems. During the pandemic, we must study the impacts of environmental factors on viral behaviors, develop control measures to minimize secondary environmental risks, and conduct timely assessments of viral risks and secondary environmental effects with a view to reducing the impacts of the pandemic on human health and on ecosystems. After the pandemic, we should further strengthen surveillance for viruses and the prevention of viral spread, maintain control measures for minimizing secondary environmental risks, develop our capability to scientifically predict pandemics and resurgences, and prepare for the next unexpected resurgence. Meanwhile, we should restore the normal life and production of the public based on the "One Health" concept, that views global human and environmental health as inextricably linked. Our recommendations are essential for improving nations' capability to respond to global public health emergencies.

Health risk assessment of As due to rice ingestion based on iAs distribution and actual consumption patterns for the residents in Beijing: a cross-sectional study.

As a well-known human carcinogen, arsenic (As) could pose various detrimental health effects to humans mainly through the exposure pathway of food ingestion. In comparison with other foods, rice can accumulate more arsenic due to its tissue specificity. Thus, it is of great significance to assess the health risk of As due to rice ingestion. However, the study on risk assessment from exposure to As in rice is still in an early stage and lack accuracy to date. In this study, after obtaining the rice exposure behavior patterns based on a questionnaire survey, a total of 160 rice samples, which consisted of 4 types (i.e., japonica, indica, glutinous and brown rice), rice from 4 areas and consumed by most of the population in Beijing, were collected. On the basis of the actual intake rate and the species weighted average concentration of consumed rice, average daily exposure dose and health risks of inorganic As (iAs) from rice ingestion were assessed for the population among different genders and ages in Beijing. The results show that japonica rice and rice from Northeast China had higher As content, with the same value of 0.064 mg kg-1. And, they were the most popular rice consumed by people, with the intake rates of 75.50 g d-1, and 67.91 g d-1, respectively. The proportion of iAs to total As (tAs) was 58.34%, with a range of 43.18-71.88%. The average daily dose of iAs for the population was 1.15 × 10-4, which mainly came from japonica rice and the rice from Northeast China ingestion. In comparison with the acceptable non-cancer risk, which had a HQ value of 0.38, the carcinogenic risk of the population in Beijing was 1.73 × 10-4 on average. Furthermore, males had higher carcinogenic risk (1.88 × 10-4) than females (1.62 × 10-4), and the people in the age of 45-55 suffered from the highest carcinogenic risk (2.22 × 10-4), which mainly was attributed to the japonica rice and the rice from Northeast China. This study strengthened that appropriate dietary patterns should be paid more attention in order to control the health risk due to As exposure.

Deriving convincing human health ambient water quality criteria for benzo[a]pyrene and providing basis for the water quality management: The impacts of national bioaccumulation factors and probabilistic modeling.

Science-based water quality criteria are the cornerstone of water quality standards. This paper improved the methodology for the derivation of human health water quality criteria (HHWQC) and applied it for benzo[a]pyrene (BaP) to provide a scientific basis for the management of polycyclic aromatic hydrocarbons (PAHs) in surface waters. First, the national bioaccumulation factors (BAFs) for BaP were derived using field-measured BAFs and field-measured biota-sediment accumulation factors (BSAFs) across China, respectively, which results were comparable and demonstrated the reliability of the obtained national BAFs for BaP. The HHWQC for BaP derived using the probabilistic approach were 3.98-4.70 ng/L and were comparable with those derived by the deterministic approach, suggesting the accuracy of derived HHWQC for BaP. Through the probabilistic approach, the probability distributions of lifetime incremental cancer risk from BaP in water were provided and the consumption rates of aquatic products at trophic level 2 and 3 were identified as factors influencing risks of BaP significantly. The derived HHWQC for BaP in China are approximately 33-36 times higher than those in the United States because of the high national BAFs and cancer slope factor of BaP used for the United States. In addition, the recommended HHWQC for BaP conform to the situation in China and are approximately 1.5 times higher than the standard value of BaP in the current National Surface Water Quality Standard (GB 3838-2002) in China (2.80 ng/L), which will play an important role in the amendment of National Surface Water Quality Standard in the future. Approximately 36% of the studied surface freshwater in China contains BaP with levels exceeding the recommended HHWQC, suggesting the pollution of BaP in surface freshwater is severe and needs to be given more attention. This study is significant for the scientific development of HHWQC worldwide and the management of pollutants in water.

Polycycl. Aromatic Hydrocarbon Exposure of Children in Typical Household Coal Combustion Environments: Seasonal Variations, Sources, and Carcinogenic Risks.

Polycyclic aromatic hydrocarbon (PAH) emissions from the combustion of household solid coal for cooking and heating cause great harm to public health in China, especially in less developed areas. Children are one of the most susceptible population groups at risk of indoor air pollutants due to their immature respiratory and immune systems. However, information on PAH exposure of children is limited due to limited monitoring data. In this study, we aimed to assess the seasonal differences of PAHs in classrooms, analyze the pollutant sources, and calculate the incremental lifetime cancer risk attributable to PAHs in Shanxi Provence. A typical school using household coal combustion in Shanxi Province was selected. Fine particulate matter (PM2.5)samples were collected by both individual samplers and fixed middle-flow samplers during the heating and non-heating seasons in December 2018 and April 2019. The PAH concentrations in PM2.5 samples were analyzed by a gas chromatograph coupled to a mass spectrometer. The results showed that PAH concentrations in PM2.5 varied between 89.1 ng/m3 in the heating season and 1.75 ng/m3 in the non-heating season. The mean concentrations of benzo[a]pyrene (BaP), a carcinogenic marker of PAHs, were 10.3 and 0.05 ng/m3 in the heating and non-heating seasons, respectively. Source allocation analysis of individual portable and passive samplers revealed that the main contributors during heating and non-heating seasons were coal combustion and gasoline sources, respectively. According to the results of a Monte Carlo simulation, the incremental lifetime cancer risk values from the inhalation of PAHs in the heating and non-heating seasons were 3.1 × 10-6 and 5.7 × 10-8, respectively. The significant increase in PAHs and the incremental lifetime cancer risk in the heating season indicates that children are more exposed to health threats in winter. Further PAH exposure control strategies, including reducing coal usage and promoting clean fuel applications, need to be developed to reduce the risk of PAH-induced cancer.

Eyeblink recognition improves fatigue prediction from single-channel forehead EEG in a realistic sustained attention task.

OBJECTIVE: A passive brain-computer interface recognizes its operator's cognitive state without an explicitly performed control task. This technique is commonly used in conjunction with consumer-grade EEG devices for detecting the conditions of fatigue, attention, emotional arousal, or motion sickness. While it is easy to mount the sensors in the forehead area, which is not covered with hair, the recorded signals become greatly contaminated with eyeblink and movement artifacts, which makes it a challenge to acquire the data of suitable for analysis quality, particularly in few channel systems where a lack of spatial information limits the applicability of sophisticated signal cleaning algorithms. In this article, we demonstrate that by combining the features associated with electrocortical activities and eyeblink recognition analysis, it becomes feasible to design an accurate system for the inattention state prediction using just a single EEG sensor. APPROACH: Fifteen healthy 22-28 years old participants took part in the experiment that implemented a realistic sustained attention task of nighttime highway driving in a virtual environment. The EEG data were collected using a portable wireless Mindo-4 device, which constitutes an adjustable elastic strip with foam-based sensors, a data-acquisition module, an amplification and digitizing unit, and a Bluetooth[Formula: see text] module. MAIN RESULTS: The spectral analysis of the EEG samples that immediately preceded the lane departure events revealed alterations in the tonic power spectral density, which accompanied elongations in the drivers' reaction times. The RMSE of the predicted reaction times, which are based on a combination of the brain-related and eyeblink features, is 0.034 ± 0.019 s, and the r2 is 0.885 ± 0.057 according to a within-session leave-one-trial-out cross-validation. SIGNIFICANCE: The drowsiness prediction from a frontal single-channel setup can achieve a comparable performance with using an array of occipital EEG sensors. As a direct result of utilizing a dry sensor placed in the non-covered with hair head area, the proposed approach in this study is low-cost and user-friendly.

Association of solid fuel use with risk of stunting in children living in China.

Stunting adversely affects physical and mental outcomes of children. It has not been examined whether household air pollution from solid fuel combustion is a risk factor for stunting in children. In a total of 41,439 children aged 6-17 across China, height was measured using a unified protocol. Multivariable linear regression models and logistic regression models were used to assess the associations of solid fuel use for cooking/heating with stunting in children. Adjusted for covariates, cooking/heating with solid fuel was significantly associated with a lower z-score for height for age and sex (ß = -0.21 [-0.32 to -0.09] and -0.17 [-0.31 to -0.03], respectively) and an increased risk of stunting with an estimated ORs of 1.34 [1.07~1.68] and 1.37 [1.02~1.83], respectively. The risk of stunting associated with solid fuel use was statistically significant in high-age children. And the effect was greater on girls than on boys, though the difference was not statistically significant. Our study suggested that Chinese children living in households using solid fuel had a significantly higher risk of stunting than those living in households using cleaner fuel.

[Refined Assessment of Exposure and Health Risks of Heavy Metals in Water for the Children in Xigu District, Lanzhou].

Water is an important pathway for human exposure to heavy metals. Accurate assessment of the health risks that are related to exposure to heavy metals in drinking and household water are required for the preparation of targeted health risk prevention measures. This study explores and identifies the health risks related to exposure to heavy metals via drinking and household water pathways in Xigu District, Lanzhou, northwestern China, using household water samples and survey data obtained during July-September 2015 (wet season) and December 2015-January 2016 (dry season). During each period, drinking water and household water that were available for use by children aged 0-5 and 6-17 years were sampled and a questionnaire on water-related behavior patterns was completed for each household. Cd, Cr, Pb, and As concentrations were analyzed in all water samples, and were used along with water-related exposure factors from the questionnaires to estimate exposure doses and associated health risks using models recommended by the United States Environmental Protection Agency (US EPA). The results showed that the concentrations of Cd, Cr, Pb, and As in both drinking and household water samples did not exceed the relative thresholds defined in China's national water quality standards. The concentrations of heavy metals in household water were more affected by seasonal factors than of those of drinking water. The non-cancer and cancer risks were in the ranges of 2.82×10-8-2.43×10-2 and 7.55×10-9-3.62×10-5, respectively, which are within acceptable levels, although the non-cancer and cancer risks from drinking water were both higher than of those determined for household water. Furthermore, the non-cancer and cancer risks from household water for children aged 0-5 years were lower than of those for children aged 6-17 years in each period. However, the cancer risk from drinking water for children aged 0-5 years was lower than of that for children aged 6-17 years, whereas the reverse was found for non-cancer risks. This study indicates that Cd, Cr, Pb, and As in drinking and household water did not pose significant detrimental effects to human health, and that the refined exposure assessment used could reduce uncertainties in health risk assessments.

Bacterial pathogens and community composition in advanced sewage treatment systems revealed by metagenomics analysis based on high-throughput sequencing.

This study used 454 pyrosequencing, Illumina high-throughput sequencing and metagenomic analysis to investigate bacterial pathogens and their potential virulence in a sewage treatment plant (STP) applying both conventional and advanced treatment processes. Pyrosequencing and Illumina sequencing consistently demonstrated that Arcobacter genus occupied over 43.42% of total abundance of potential pathogens in the STP. At species level, potential pathogens Arcobacter butzleri, Aeromonas hydrophila and Klebsiella pneumonia dominated in raw sewage, which was also confirmed by quantitative real time PCR. Illumina sequencing also revealed prevalence of various types of pathogenicity islands and virulence proteins in the STP. Most of the potential pathogens and virulence factors were eliminated in the STP, and the removal efficiency mainly depended on oxidation ditch. Compared with sand filtration, magnetic resin seemed to have higher removals in most of the potential pathogens and virulence factors. However, presence of the residual A. butzleri in the final effluent still deserves more concerns. The findings indicate that sewage acts as an important source of environmental pathogens, but STPs can effectively control their spread in the environment. Joint use of the high-throughput sequencing technologies is considered a reliable method for deep and comprehensive overview of environmental bacterial virulence.