TRPM8 promotes hepatocellular carcinoma progression by inducing SNORA55 mediated nuclear-mitochondrial communication.

Transient receptor potential melastatin 8 (TRPM8) play crucial roles in solid tumors such as prostate and breast cancers. But the role of TRPM8 in hepatocellular carcinoma (HCC) and its underlying molecular mechanisms remain largely unknown. In this study, the functional roles of TRPM8 in HCC were systematically investigated for the first time. It was found that the expression level of TRPM8 was significantly upregulated in HCC, which was positively correlated with the worse clinicopathological characteristics. Functional studies revealed that pharmacological inhibition or genetic downregulation of TRPM8 ameliorated hepatocarcinogenesis in vitro and in vivo. Mechanistically, the oncogenic role of TRPM8 in HCC was at least partially achieved by affecting mitochondrial function. TRPM8 could modulate the expression of nucleolar relative molecule-small nucleolar RNA, H/ACA box 55 (SNORA55) by inducing transformation of chromatin structure and histone modification type. These data suggest that as a bridge molecule in TRPM8-triggered HCC, SNORA55 can migrate from nucleus to mitochondria and exert oncogenic role by affecting mitochondria function through targeting ATP5A1 and ATP5B. Herein, we uncovered the potent oncogenic role of TRPM8 in HCC by inducing nuclear and mitochondrial dysfunction in a SNORA55 dependent manner, and provided a potential therapeutic target for HCC.

TRPM8 contributes to liver regeneration via mitochondrial energy metabolism mediated by PGC1α.

Impairment of liver regeneration leads to severe morbidity in acute and chronic severe liver disease. Transient receptor potential melastain 8 (TRPM8) is involved in a variety of processes, including temperature sensing, ion homeostasis, and cell proliferation. However, whether TRPM8 contributes to liver regeneration is still unclear. We assessed the effect and mechanism of TRPM8 in liver regeneration and hepatocyte proliferation in vivo and in vitro. In this study, we found that TRPM8 deficiency impairs liver regeneration in mice. Mechanistically, the results revealed that mitochondrial energy metabolism was attenuated in livers from TRPM8 knockout (KO) mice. Furthermore, we found that TRPM8 contributes to the proliferation of hepatocytes via PGC1α. Taken together, this study shows that TRPM8 contributes to liver regeneration in mice after hepatectomy. Genetic approaches and pharmacological approaches to regulate TRPM8 activity may be beneficial to the promotion of liver regeneration.

Transient Receptor Potential Vanilloid-1 (TRPV1) Alleviates Hepatic Fibrosis via TGF-ß Signaling.

Hepatic fibrosis is a major global health problem and considered a leading cause of liver-related morbidity and mortality worldwide. Although previous studies have suggested that transient receptor potential vanilloid-1 (TRPV1) is protective against cardiac and renal fibrosis, its functional role in hepatic fibrosis has remained elusive. Herein, we characterize the effects of TRPV1 on carbon tetrachloride- (CCl4-) induced mice, in vitro transforming growth factor-ß- (TGF-ß-) treated hepatic stellate cells (HSCs), and human fibrosis specimens. Finally, our results demonstrated the significant TRPV1 downregulation in human liver fibrosis tissues. Knocking out TRPV1 significantly increased the expression of various hepatic fibrosis markers, while the expression of these biomarkers declined markedly in capsaicin-activated mice. Moreover, our study revealed that knocking down TRPV1 would enhance the promotive effect of TGF-ß on HSC proliferation, cell cycle, cell apoptosis, and ECM expression. Also, such promotive effect can be partially reversible by capsaicin, an exogenous activator of TRPV1. Collectively, the obtained data suggest that TRPV1 may alleviate CCl4-induced hepatic fibrosis and attenuate the effect of TGF-ß on HSC activation, proliferation, and apoptosis, which overall implies that targeting TRPV1 channel activity may be an effective therapeutic strategy for treating hepatic fibrosis.

TRPM8 deficiency attenuates liver fibrosis through S100A9-HNF4α signaling.

BACKGROUND: Liver fibrosis represent a major global health care burden. Data emerging from recent advances suggest TRPM8, a member of the transient receptor potential (TRP) family of ion channels, plays an essential role in various chronic inflammatory diseases. However, its role in liver fibrosis remains unknown. Herein, we assessed the potential effect of TRPM8 in liver fibrosis. METHODS: The effect of TRPM8 was evaluated using specimens obtained from classic murine models of liver fibrosis, namely wild-type (WT) and TRPM8-/- (KO) fibrotic mice after carbon tetrachloride (CCl4) or bile duct ligation (BDL) treatment. The role of TRPM8 was systematically evaluated using specimens obtained from the aforementioned animal models after various in vivo and in vitro experiments. RESULTS: Clinicopathological analysis showed that TRPM8 expression was upregulated in tissue samples from cirrhosis patients and fibrotic mice. TRPM8 deficiency not only attenuated inflammation and fibrosis progression in mice but also helped to alleviate symptoms of cholangiopathies. Moreover, reduction in S100A9 and increase in HNF4α expressions were observed in liver of CCl4- and BDL- treated TRPM8-/- mice. A strong regulatory linkage between S100A9 and HNF4α was also noticed in L02 cells that underwent siRNA-mediated S100A9 knockdown and S100A9 overexpressing plasmid transfection. Lastly, the alleviative effect of a selective TRPM8 antagonist was confirmed in vivo. CONCLUSIONS: These findings suggest TRPM8 deficiency may exert protective effects against inflammation, cholangiopathies, and fibrosis through S100A9-HNF4α signaling. M8-B might be a promising therapeutic candidate for liver fibrosis.

Simultaneous multiparameter whole blood hemostasis assessment using a carbon nanotube-paper composite capacitance sensor.

Rapid and accurate clinical assessment of hemostasis is essential for managing patients who undergo invasive procedures, experience hemorrhages, or receive antithrombotic therapies. Hemostasis encompasses an ensemble of interactions between the cellular and non-cellular blood components, but current devices assess only partial aspects of this complex process. In this work, we describe the development of a new approach to simultaneously evaluate coagulation function, platelet count or function, and hematocrit using a carbon nanotube-paper composite (CPC) capacitance sensor. CPC capacitance response to blood clotting at 1.3 MHz provided three sensing parameters with distinctive sensitivities towards multiple clotting elements. Whole blood-based hemostasis assessments were conducted to demonstrate the potential utility of the developed sensor for various hemostatic conditions, including pathological conditions, such as hemophilia and thrombocytopenia. Results showed good agreements when compared to a conventional thromboelastography. Overall, the presented CPC capacitance sensor is a promising new biomedical device for convenient non-contact whole-blood based comprehensive hemostasis evaluation.

Unexpected enhancement of FVIII immunogenicity by endothelial expression in lentivirus-transduced and transgenic mice.

Factor VIII (FVIII) replacement therapy for hemophilia A is complicated by development of inhibitory antibodies (inhibitors) in ∼30% of patients. Because endothelial cells (ECs) are the primary physiologic expression site, we probed the therapeutic potential of genetically restoring FVIII expression selectively in ECs in hemophilia A mice (FVIIInull). Expression of FVIII was driven by the Tie2 promoter in the context of lentivirus (LV)-mediated in situ transduction (T2F8LV) or embryonic stem cell-mediated transgenesis (T2F8Tg). Both endothelial expression approaches were associated with a strikingly robust immune response. Following in situ T2F8LV-mediated EC transduction, all FVIIInull mice developed inhibitors but had no detectable plasma FVIII. In the transgenic approach, the T2F8Tg mice had normalized plasma FVIII levels, but showed strong sensitivity to developing an FVIII immune response upon FVIII immunization. A single injection of FVIII with incomplete Freund adjuvant led to high titers of inhibitors and reduction of plasma FVIII to undetectable levels. Because ECs are putative major histocompatibility complex class II (MHCII)-expressing nonhematopoietic, "semiprofessional" antigen-presenting cells (APCs), we asked whether they might directly influence the FVIII immune responses. Imaging and flow cytometric studies confirmed that both murine and human ECs express MHCII and efficiently bind and take up FVIII protein in vitro. Moreover, microvascular ECs preconditioned ex vivo with inflammatory cytokines could functionally present exogenously taken-up FVIII to previously primed CD4+/CXCR5+ T follicular helper (Tfh) cells to drive FVIII-specific proliferation. Our results show an unanticipated immunogenicity of EC-expressed FVIII and suggest a context-dependent role for ECs in the regulation of inhibitors as auxiliary APCs for Tfh cells.

Surface-Acoustic-Wave-Based Lab-on-Chip for Rapid Transport of Cryoprotectants across Cell Membrane for Cryopreservation with Significantly Improved Cell Viability.

Cryopreservation is essential to effectively extend the shelf life of delicate biomaterials while maintaining proper levels of cell functions. Cryopreservation requires a cryoprotective agent (CPA) to suppress intracellular ice formation during freezing, but it must be removed prior to clinical use due to its toxicity. Conventional multistep CPA loading and unloading approaches are time consuming, often creating osmotic shocks and causing mechanical injuries for biological samples. An efficient surface-acoustic-wave- (SAW-) based lab-on-a-chip (LoC) for fast loading and removal of CPAs is presented here. With the SAW-based multistep CPA loading/removal approach, high concentration (3 m) CPA can be successfully loaded and removed in less than 1 min. Results show that the technique causes the least harm to umbilical cord matrix mesenchymal stem cells as compared to conventional method, and an average of 24% higher cell recovery rate is achieved, while preserving the integrity and morphology of the cells. This device is the first of its kind to combine high loading/unloading efficiency, high cell viability, and high throughput into one LoC device, offering not only a more efficient and safer route for CPA loading and removal from cells, but also paving the way for other cryopreservation-dependent applications.

Quantification of cell viability and rapid screening anti-cancer drug utilizing nanomechanical fluctuation.

Cancer is a serious threat to human health. Although numerous anti-cancer drugs are available clinically, many have shown toxic side effects due to poor tumor-selectivity, and reduced effectiveness due to cancers rapid development of resistance to treatment. The development of new highly efficient and practical methods to quantify cell viability and its change under drug treatment is thus of significant importance in both understanding of anti-cancer mechanism and anti-cancer drug screening. Here, we present an approach of utilizing a nanomechanical fluctuation based highly sensitive microcantilever sensor, which is capable of characterizing the viability of cells and quantitatively screening (within tens of minutes) their responses to a drug with the obvious advantages of a rapid, label-free, quantitative, noninvasive, real-time and in-situ assay. The microcantilever sensor operated in fluctuation mode was used in evaluating the paclitaxel effectiveness on breast cancer cell line MCF-7. This study demonstrated that the nanomechanical fluctuations of the microcantilever sensor are sensitive enough to detect the dynamic variation in cellular force which is provided by the cytoskeleton, using cell metabolism as its energy source, and the dynamic instability of microtubules plays an important role in the generation of the force. We propose that cell viability consists of two parts: biological viability and mechanical viability. Our experimental results suggest that paclitaxel has little effect on biological viability, but has a significant effect on mechanical viability. This new method provides a new concept and strategy for the evaluation of cell viability and the screening of anti-cancer drugs.

High accuracy thermal conductivity measurement of aqueous cryoprotective agents and semi-rigid biological tissues using a microfabricated thermal sensor.

An improved thermal-needle approach for accurate and fast measurement of thermal conductivity of aqueous and soft biomaterials was developed using microfabricated thermal conductivity sensors. This microscopic measuring device was comprehensively characterized at temperatures from 0 °C to 40 °C. Despite the previous belief, system calibration constant was observed to be highly temperature-dependent. Dynamic thermal conductivity response during cooling (40 °C to -40 °C) was observed using the miniaturized single tip sensor for various concentrations of CPAs, i.e., glycerol, ethylene glycol and dimethyl sulfoxide. Chicken breast, chicken skin, porcine limb, and bovine liver were assayed to investigate the effect of anatomical heterogeneity on thermal conductivity using the arrayed multi-tip sensor at 20 °C. Experimental results revealed distinctive differences in localized thermal conductivity, which suggests the use of approximated or constant property values is expected to bring about results with largely inflated uncertainties when investigating bio-heat transfer mechanisms and/or performing sophisticated thermal modeling with complex biological tissues. Overall, the presented micro thermal sensor with automated data analysis algorithm is a promising approach for direct thermal conductivity measurement of aqueous solutions and soft biomaterials and is of great value to cryopreservation of tissues, hyperthermia or cryogenic, and other thermal-based clinical diagnostics and treatments.

An improved model for nucleation-limited ice formation in living cells during freezing.

Ice formation in living cells is a lethal event during freezing and its characterization is important to the development of optimal protocols for not only cryopreservation but also cryotherapy applications. Although the model for probability of ice formation (PIF) in cells developed by Toner et al. has been widely used to predict nucleation-limited intracellular ice formation (IIF), our data of freezing Hela cells suggest that this model could give misleading prediction of PIF when the maximum PIF in cells during freezing is less than 1 (PIF ranges from 0 to 1). We introduce a new model to overcome this problem by incorporating a critical cell volume to modify the Toner's original model. We further reveal that this critical cell volume is dependent on the mechanisms of ice nucleation in cells during freezing, i.e., surface-catalyzed nucleation (SCN) and volume-catalyzed nucleation (VCN). Taken together, the improved PIF model may be valuable for better understanding of the mechanisms of ice nucleation in cells during freezing and more accurate prediction of PIF for cryopreservation and cryotherapy applications.

A new computational fluid dynamics method for in-depth investigation of flow dynamics in roller pump systems.

Roller pumps are commonly used in circulatory assist devices to deliver blood, but the inherent high mechanical stresses (especially wall shear stress) may cause considerable damage to cells. Conventional experimental approaches to evaluate and reduce device-induced cell damage require considerable effort and resources. In this work, we describe the use of a new computational fluid dynamics method to more effectively study roller pump systems. A generalized parametric model for the fluid field in a typical roller pump system is presented first, and analytical formulations of the moving boundary are then derived. Based on the model and formulations, the dynamic geometry and mesh of the fluid field can be updated automatically according to the time-dependent roller positions. The described method successfully simulated the pulsing flow generated by the pump, offering a convenient way to visualize the inherent flow pattern and to assess shear-induced cell damage. Moreover, the highly reconfigurable model and the semiautomated simulation process extend the usefulness of the presented method to a wider range of applications. Comparison studies were conducted, and valuable indications about the detailed effects of structural parameters and operational conditions on the produced wall shear stress were obtained. Given the good consistency between the simulated results and the existing experimental data, the presented method displays promising potential to more effectively guide the development of improved roller pump systems which produce less mechanical damage to cells.

Highly sensitive nanomechanical immunosensor using half antibody fragments.

The improvement of sensitivity is of great significance to the application of biochemical sensor. In this study, we propose a micocantilever-based immunosensor in surface stress mode using half antibody fragments as receptor molecules. The thiol-containing half antibody fragment was obtained with a low loss of antibody biological activity and then was covalently and orientedly immobilized on the gold surface of microcantilevers via two native thiol groups. Such a one-step reaction and immobilization of receptor molecule simplify the preparation process of micocantilever immunosensor. Using shortened and highly oriented half antibody fragments as receptor molecules, the generation of surface stress and the transmission of stress from the interaction region of molecules to the surface of the microcantilever have been elevated significantly. The limit of detection (LOD) of the presented sensor has been significantly lowered to 1 pg/mL, or 1.1 pM in equivalence, which is a 500-fold improvement when compared with intact full antibody coated conventional micocantilever sensors. The results indicate that the half antibody fragment is well suited for the functionalization of the microcantilever surface and is generally applicable to all microcantilever immunosensor development, and this principle will help to design a functional film of devices with significantly lower LOD.

Numerical simulation of the effect of superparamagnetic nanoparticles on microwave rewarming of cryopreserved tissues.

In this study, the microwave rewarming process of cryopreserved samples with embedded superparamagnetic (SPM) nanoparticles was numerically simulated. The Finite Element Method (FEM) was used to calculate the coupling of the electromagnetic field and the temperature field in a microwave rewarming system composed of a cylindrical resonant cavity, an antenna source, and a frozen sample phantom with temperature-dependent properties. The heat generated by the sample and the nanoparticles inside the electromagnetic field of the microwave cavity was calculated. The dielectric properties of the biological tissues were approximated using the Debye model, which is applicable at different temperatures. The numerical results showed that, during the rewarming process of the sample phantom without nanoparticles, the rewarming rate was 29.45°C/min and the maximum temperature gradient in the sample was 3.58°C/mm. If nanoparticles were embedded in the sample, and the cavity power was unchanged, the rewarming rate was 47.76°C/min and the maximum temperature gradient in the sample was 1.64°C/mm. In the presence of SPM nanoparticles, the rewarming rate and the maximum temperature gradient were able to reach 20.73°C/min and 0.68°C/mm at the end of the rewarming under the optimized cavity power setting, respectively. The ability to change these temperature behaviors may prevent devitrification and would greatly diminish thermal stress during the rewarming process. The results indicate that the rewarming rate and the uniformity of temperature distribution are increased by nanoparticles. This could be because nanoparticles generated heat in the sample homogeneously and the time-dependent parameters of the sample improved after nanoparticles were homogeneously embedded within it. We were thus able to estimate the positive effect of SPM nanoparticles on microwave rewarming of cryopreserved samples.

Microfabricated thermal conductivity sensor: a high resolution tool for quantitative thermal property measurement of biomaterials and solutions.

Obtaining accurate thermal properties of biomaterials plays an important role in the field of cryobiology. Currently, thermal needle, which is constructed by enclosing a manually winded thin metal wire with an insulation coating in a metallic sheath, is the only available device that is capable of measuring thermal conductivity of biomaterials. Major drawbacks, such as macroscale sensor size, lack of versatile format to accommodate samples with various shapes and sizes, neglected effects of heat transfer inside the probe and thermal contact resistance between the sensing element and the probe body, difficult to mass produce, poor data repeatability and reliability and labor-intense sensor calibration, have significantly reduced their potential to be an essential measurement tool to provide key thermal property information of biological specimens. In this study, we describe the development of an approach to measure thermal conductivity of liquids and soft bio-tissues using a proof-of-concept MEMS based thermal probe. By employing a microfabricated closely-packed gold wire to function as the heater and the thermistor, the presented thermal sensor can be used to measure thermal conductivities of fluids and natural soft biomaterials (particularly, the sensor may be directly inserted into soft tissues in living animal/plant bodies or into tissues isolated from the animal/plant bodies), where other more standard approaches cannot be used. Thermal standard materials have been used to calibrate two randomly selected thermal probes at room temperature. Variation between the obtained system calibration constants is less than 10%. By incorporating the previously obtained system calibration constant, three randomly selected thermal probes have been successfully utilized to measure the thermal conductivities of various solutions and tissue samples under different temperatures. Overall, the measurements are in agreement with the recommended values (percentage error less than 5%). The microfabricated thermal conductivity sensor offers superior characteristics compared to those traditional macroscopic thermal sensors, such as, (a) reduced thermal mass and thermal resistivity, (b) improved thermal contact between sensor and sample, (c) easy to manufacture with mass production capability, (d) flexibility to reconfigure sensor geometries for measuring samples with various sizes and shapes, and (e) reduced calibration workload for all sensors microfabricated from the same batch. The MEMS based thermal conductivity sensor is a promising approach to overcome the inherent limitations of existing macroscopic devices and capable of delivering accurate thermal conductivity measurement of biomaterials with various shapes and sizes.

Platelet retraction force measurements using flexible post force sensors.

Platelets play an important role in hemostasis by forming a thrombotic plug that seals the vessel wall and promotes vascular healing. After platelets adhere and aggregate at the wound site, their next step is to generate contractile forces through the coordination of physicochemical interactions between actin, myosin, and alpha(IIb)beta(3) integrin receptors that retract the thrombus' size and strengthen its adhesion to the exposed matrix. Although platelet contractile forces (PCF) are a definitive feature of hemostasis and thrombosis, there are few approaches that can directly measure them. In this study, we describe the development of an approach to measure PCF in microthrombi using a microscopic flexible post force sensor array. Quasi-static measurements and live microscopic imaging of thrombin-activated platelets on the posts were conducted to assay the development of PCF to various hemostatic conditions. Microthrombi were observed to produce forces that monotonically increased with thrombin concentration and activation time, but forces subsided when thrombin was removed. PCF results were statistically similar on arrays of posts printed with fibronectin or fibrinogen. PCF measurements were combined with clot volume measurements to determine that the average force per platelet was 2.1 +/- 0.1 nN after 60 min, which is significantly higher than what has been measured with previous approaches. Overall, the flexible post arrays for PCF measurements are a promising approach for evaluating platelet functionality, platelet physiology and pathology, the impacts of different matrices or agonists on hemostatic responses, and in providing critical information regarding platelet activity that can guide new hemostatic or thrombotic strategies.