Enhanced Interface Charge Carrier Transport of SnO2/CeO2 via Oxygen Vacancy Synergized Heterojunction for Triethylamine Sensing Property.

Efficient charge carrier transport characteristics are critical to achieving the excellent performance of metal-oxide semiconductor gas sensors. Herein, SnO2/CeO2 heterojunction layered nanosheets with abundant oxygen vacancies were successfully synthesized through a simple solvothermal assisted high-temperature calcination method. The synergistic effect of oxygen vacancies and heterojunctions promoting the charge carrier transport properties at the SnO2/CeO2 interface for the enhanced sensing properties of triethylamine (TEA) was highlighted. As a result, the optimized SnO2/CeO2 exhibits improved gas sensing performance at 173 °C to 50 ppm of TEA. These include high response (205), excellent selectivity, low detection limit, and good long-term stability. This enhanced gas sensing property of SnO2/CeO2 is mainly attributed to the fact that the heterojunction and oxygen vacancies act as dual active sites synergistically inducing electron transfer, thereby effectively modulating the transport properties of the interfacial charge carriers, and thus facilitate the surface reactions efficiently. In this work, the dual-engineering strategy of synergistic interaction of heterojunction and oxygen vacancies can provide new perspectives for the design of advanced gas sensing materials.

N-Rich and Sulfur-Doped Nano Hollow Carbons with High Oxidase-like Activity Prepared Using a Green Template of CaCO3 for Bacteriostasis.

Nanozymes, enzyme-mimicking nanomaterials, have attracted increasing attention due to their low cost, high stability, and catalytic ability compared with natural enzymes. However, the catalytic efficiency of the nanozymes is still relatively low, and catalytic reaction mechanisms remain unclear. To address these issues, herein we prepared nitrogen-riched and sulfur-codoped nano hollow carbons (N/S-HCS) using a green and useful template of CaCO3. N/S-HCS exhibits enhanced oxidase-like activity and catalytic kinetic performance. It could directly oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to the heavy blue colored ox-TMB without H2O2. The maximum reaction rate (Vmax) is 186.7 × 10-8 M·s-1, and Michaelis-Menten constant (Km) is 0.162 mM. DFT results show that N and S codoping could work synergistically to provide more active sites, resulting in the superior ability to adsorb oxygen and enhanced catalytic activity. Meantime, we develop a multispectral characterization strategy to unravel catalytic reaction mechanisms about N/S-HCS. It successfully induces the generation of superoxide (•O2-) and hydroxyl (•OH) during the colorimetric reaction which are the key intermediate products of the catalytic reaction. Furthermore, N/S-HCS increased the cellular reactive oxygen species level significantly and induced bacteriostasis to more than 95% of Escherichia coli.

Anchoring of Polymer Loops on Enzyme-Immobilized Mesoporous ZIF-8 Enhances the Recognition Selectivity of Angiotensin-Converting Enzyme Inhibitory Peptides.

Immobilized angiotensin-converting enzyme (ACE) is a promising material for the rapid screening of antihypertensive drugs, but the nonspecific adsorption is a serious problem in separation processes involving complex biological products. In this study, triblock copolymers with dopamine (DA) block as anchors and PEG block as the main body (DA-PEGx-DA) were attached to an immobilized ACE (ACE@mZIF-8/PDA, AmZP) surface via the "grafting to" strategy which endowed them with anti-nonspecific adsorption. The influence of DA-PEGx-DA chain length on nonspecific adsorption was confirmed. The excellent specificity and reusability of the obtained ACE@mZIF-8/PDA/DA-PEG5000-DA (AmZPP5000) was validated by screening two known ACE inhibitory peptides Val-Pro-Pro (VPP, competitive inhibitory peptides of ACE) and Gly-Met-Lys-Cys-Ala-Phe (GF-6, noncompetitive inhibitory peptides of ACE) from a mixture containing active and inactive compounds. These results demonstrate that anchored polymer loops are effective for high-recognition selectivity and AmZPP5000 is a promising compound for the efficient separation of ACE inhibitors in biological samples.

Exploration of interaction between angiotensin I-converting enzyme (ACE) and the inhibitory peptide from Wakame (Undaria pinnatifida).

The interaction between angiotensin I-converting enzyme (ACE) and the inhibitory peptide KNFL from Wakame was explored using isothermal titration calorimetry, multiple spectroscopic techniques and molecular dynamics simulations, and an inhibition model was established based on free energy binding theory. The experiments revealed that the binding of KNFL to ACE was a spontaneous exothermic process driven by enthalpy and entropy and occurred via multiple binding sites to form stable complexes. The complexes may be formed through multiple steps of inducing fit and conformational selection. The peptide KNFL had a fluorescence quenching effect on ACE and its addition not only affected the microenvironment around the ACE Trp and Tyr residues, but also increased the diameter and altered the conformation of ACE. This study should prove useful for improving our understanding of the mechanism of ACE inhibitory peptides.

Non-covalent and covalent immobilization of papain onto Ti3C2 MXene nanosheets.

Papain was immobilized onto Ti3C2 MXene nanosheets by physical adsorption and physical adsorption combined with covalent crosslinking with glutaraldehyde. Ti3C2 MXene nanosheets were prepared by hydrofluoric acid etching method. The resulting products were well characterized by SEM, BET, XRD, FTIR, XPS. The optimized immobilization conditions are pH 6.5, immobilization time of 20 h, immobilization temperature of 10℃, and 10 mL 2 mg mL-1 papain, the amount of papain immobilized was 156 mg g-1, the activity of the immobilized papain determined was 1701 U∙g-1. The immobilized papain exhibited enhanced pH and temperature endurances, immobilized papain also showed improved storage stability (39.25 % and 65.57 % after 20 days of storage at 4 °C). papain reusability was significantly improved after immobilization and it retained more than 50 % of its initial activity after 5 repeated cycles. Interestingly, the results of immobilized enzymes demonstrated that the immobilization of enzymes on Ti3C2 MXene is feasible. Such approach could be transferred to other support systems for anchoring enzyme.

Affinity Purification of Angiotensin Converting Enzyme Inhibitory Peptides from Wakame (Undaria Pinnatifida) Using Immobilized ACE on Magnetic Metal Organic Frameworks.

Angiotensin-I-converting enzyme (ACE) inhibitory peptides derived from marine organism have shown a blood pressure lowering effect with no side effects. A new affinity medium of Fe3O4@ZIF-90 immobilized ACE (Fe3O4@ZIF-90-ACE) was prepared and used in the purification of ACE inhibitory peptides from Wakame (Undaria pinnatifida) protein hydrolysate (<5 kDa). The Fe3O4@ZIF-90 nanoparticles were prepared by a one-pot synthesis and crude ACE extract from pig lung was immobilized onto it, which exhibited excellent stability and reusability. A novel ACE inhibitory peptide, KNFL (inhibitory concentration 50, IC50 = 225.87 µM) was identified by affinity purification using Fe3O4@ZIF-90-ACE combined with reverse phase-high performance liquid chromatography (RP-HPLC) and MALDI-TOF mass spectrometry. Lineweaver-Burk analysis confirmed the non-competitive inhibition pattern of KNFL, and molecular docking showed that it bound at a non-active site of ACE via hydrogen bonds. This demonstrates that affinity purification using Fe3O4@ZIF-90-ACE is a highly efficient method for separating ACE inhibitory peptides from complex protein mixtures and the purified peptide KNFL could be developed as a functional food ingredients against hypertension.

One-pot fabrication of lignin-based aromatic porous polymers for efficient removal of bisphenol AF from water.

To remove the bisphenol AF (BPAF) from aqueous solution, two different types of lignin-based aromatic porous polymers (LAPP-1 and LAPP-2) were fabricated via one-pot crosslinking of lignin with 1,4-dichloroxylene and 4,4'-bis(chloromethyl)-1,1'-biphenyl, respectively. The successful synthesis of LAPPs was confirmed by FTIR and XPS, SEM, TEM and N2 adsorption-desorption analysis. Then, batch adsorption experiments were conducted to investigate adsorption properties toward BPAF. Based on the results, the adsorption processes were in accordance with the pseudo-second-order kinetic model and the Freundlich isotherm model, and the thermodynamic studies showed that the adsorption was a spontaneous and exothermic process. It is remarkable that LAPPs exhibited good adsorption performance in wide ranges of pH and ionic strength as well as in recycling process. Notably, compared to LAPP-1, LAPP-2 exhibited higher adsorption capacity for BPAF, which can be ascribed to its higher porosity and content of aromatic ring. Moreover, the comprehensive analysis of experimental and theoretical results indicated that the π-π interactions and pore adsorption may jointly drive the uptake process of BPAF. Considering the simple fabrication method employed and excellent BPAF adsorption performance, LAPPs provided new insights into the development of advanced lignin-based adsorbents for removal of BPAF from water.

Preparation of PVDF/CdS/Bi2WO6/ZnO hybrid membrane with enhanced visible-light photocatalytic activity for degrading nitrite in water.

In this work, a visible light-driven ternary heterojunction photocatalyst, CdS/Bi2WO6/ZnO, was synthesized using hydrothermal, ultrasonic dispersion, and deposition precipitation methods. The results show that photocatalysts with flower-like heterostructures were obtained, which could efficiently separate electron-hole pairs, and the photocatalytic activity was thereby significantly enhanced. Furthermore, CdS/Bi2WO6/ZnO and polyvinylidene fluoride (PVDF) were used to fabricate hybrid membranes via a phase-conversion method. The samples were characterized using SEM, TEM, EDX, XRD, DRS, XPS, PL, and N2 adsorption-desorption isotherms, and the transient photocurrent response. The photocatalytic activity of the hybrid membrane was evaluated, and 92.58% of the nitrite was converted into non-toxic substances within 4 h under simulated sunlight irradiation. This result indicated that the photocatalyst exhibited a good photocatalytic activity after immobilization. The possible mechanism was elucidated by studying the product during the photocatalytic degradation, and the effects of different pH values, electron scavengers, and hole scavengers on the photocatalytic performance were further investigated.

Immobilized metal affinity chromatography matrix modified by poly (ethylene glycol) methyl ether for purification of angiotensin I-converting enzyme inhibitory peptide from casein hydrolysate.

Purification of small bioactive peptides from complex biological samples is a difficult task due to the interference of concentrated large biomolecules. In this study, a magnetic immobilized metal affinity chromatography matrix modified by poly (ethylene glycol) methyl ether (IMACM@mPEG) was prepared and applied for the rapid purification of angiotensin I-converting enzyme (ACE) inhibitory peptides from casein hydrolysate. The proposed IMACM@mPEG considerably reduced the non-specific adsorption of large proteins and exhibited improved purification efficiency towards ACE inhibitory peptides. A novel peptide with moderate ACE inhibitory activity (IC50 value of 274 ± 5 µM) was identified as LLYQEPVLGPVR. Lineweaver-Burk plot confirmed the non-competitive inhibition pattern of LLYQEPVLGPVR. The purified peptide was digested after simulated gastrointestinal digestion and produced shorter peptides which contributed to enhanced ACE inhibitory activity. These results indicated that the IMACM@mPEG is an effective method for the prepurification of ACE inhibitory peptide and the purified peptide LLYQEPVLGPVR may have potential as nutraceutical ingredient in functional foods for hypertension treatments.

A Universal Strategy toward Ultrasmall Hollow Nanostructures with Remarkable Electrochemical Performance.

A facile and versatile microwave-assisted and shell-confined Kirkendall diffusion strategy is used to fabricate ultrasmall hollow nanoparticles by modulating the growth and thermal conversion of metal-organic framework (MOF) nanocrystals on graphene. This method involves that the adsorption of microwave by graphene creates a high-energy environment in a short time to decompose the in situ grown MOF nanocrystals into well-dispersed uniform core-shell nanoparticles with ultrasmall size. Upon a shell-confined Kirkendall diffusion process, hollow nanoparticles of multi-metal oxides, phosphides, and sulfides with the diameter below 20 nm and shell thickness below 3 nm can be obtained for the first time. Ultrasmall hollow nanostructures such as Fe2O3 can promote much faster charge transport and expose more active sites as well as migrate the volume change stress more efficiently than the solid and large hollow counterparts, thus demonstrating remarkable lithium-ion storage performance.

Purification, Characterization and Evaluation of Inhibitory Mechanism of ACE Inhibitory Peptides from Pearl Oyster (Pinctada fucata martensii) Meat Protein Hydrolysate.

Angiotensin-I-converting enzyme (ACE) inhibitory peptides derived from natural products have shown a blood pressure lowering effect with no side effects. In this study, two novel ACE inhibitory peptides (His-Leu-His-Thr, HLHT and Gly-Trp-Ala, GWA) were purified from pearl oyster (Pinctada fucata martensii) meat protein hydrolysate with alkaline protease by ultrafiltration, polyethylene glycol methyl ether modified immobilized metal ion affinity medium, and reverse-phase high performance liquid chromatography. Both peptides exhibited high ACE inhibitory activity with IC50 values of 458.06 ± 3.24 µM and 109.25 ± 1.45 µM, respectively. Based on the results of a Lineweaver-Burk plot, HLHT and GWA were found to be non-competitive inhibitor and competitive inhibitor respectively, which were confirmed by molecular docking. Furthermore, the pearl oyster meat protein hydrolysate exhibited an effective antihypertensive effect on SD rats. These results conclude that pearl oyster meat protein is a potential resource of ACE inhibitory peptides and the purified peptides, HLHT and GWA, can be exploited as functional food ingredients against hypertension.

Studies on the Interaction between Angiotensin-Converting Enzyme (ACE) and ACE Inhibitory Peptide from Saurida elongata.

Angiotensin-converting enzyme (ACE) inhibitory peptides derived from food protein exhibited antihypertensive effects by inhibiting ACE activity. In this work, the interaction between ACE inhibitory peptide GMKCAF (GF-6) and ACE was studied by isothermal titration calorimetry (ITC), molecular docking, ultraviolet absorption spectroscopy, fluorescence spectroscopy, and circular dichroism spectroscopy. Experimental results revealed that the binding of GF-6 to ACE was a spontaneous exothermic process driven by both enthalpy and entropy. The interaction occurred via a static quenching mechanism and involved the alteration of the conformation of ACE. In addition, ITC and molecular docking results indicated binding of GF-6 to ACE via multiple binding sites on the protein surface. This study could be deemed helpful for the better understanding of the inhibitory mechanism of ACE inhibitory peptides.

Unexpected Effect of Electrode Architecture on High-Performance Lithium-Sulfur Batteries.

In the past years, considerable efforts have been devoted to the deliberate synthesis of nanosulfur in various hosts with sophisticated structures to improve the performance of lithium-sulfur batteries (LSBs) and reveal the structure-property relationship. It is taken for granted that these elaborate sulfur nanostructures are well maintained in the ultimate electrode after the traditional mixing and coating method. Herein, we, for the first time, reveal the unexpected sulfur structure deterioration in nanosulfur/graphene composites during the electrode preparation using the traditional method because of the long-term neglected dissolution-recrystallization effect of sulfur in solvents. Consequently, compared with binder-free three-dimensional graphene/sulfur electrodes, the milled graphene/sulfur electrodes exhibit much worse electrochemical performance. On the basis of this, we further propose a facile and universal graphene oxide-assisted assembly method to avoid the dissolution-recrystallization of sulfur, by which binder-free three-dimensional ethylenediamine-functionalized graphene/sulfur (3DEFGS) electrodes have been successfully prepared. The 3DEFGS electrodes with a high areal sulfur loading of ∼6 mg cm-2 exhibit an ultrahigh initial capacity of 1394 mA h g-1 at 0.1 C, an excellent rate performance with a capacity of 796 mA h g-1 at 4 C, and superior long-term cycling stability (885 mA h g-1 after 500 cycles at 1 C), which are among the best performances achieved by all reported LSB cathodes with high areal sulfur loadings.

Effects of sodium bicarbonate on cell growth, lipid accumulation, and morphology of Chlorella vulgaris.

BACKGROUND: Low concentration NaHCO3 (ca. 12 mM) had been demonstrated to be an excellent carbon source for industrially important green alga Chlorella vulgaris and high concentration NaHCO3 (e.g. 160 mM) had been shown to be capable of controlling protozoa and stimulating lipid accumulation of another green alga, i.e., Neochloris oleoabundans. Furthermore, little was known about the mechanisms of the effects of NaHCO3 on microalgae. Thorough studies on the effects of high NaHCO3 on C. vulgaris and their mechanisms were therefore warranted. METHODS: We systematically compared the cell growth, lipid production, and cell morphology of the industrially important C. vulgaris in 160 mM NaHCO3 or 160 mM NaCl media at different pH levels. These data allowed us to analyze the effects of total dissolved inorganic carbon (DIC) and individual DIC species on C. vulgaris. Cell growth of C. vulgaris at a range of concentrations at 160 mM or lower was also studied. RESULTS: Cellular lipid cell content of 494 mg g-1 and lipid productivity of 44.5 mg L-1 day-1 were obtained at 160 mM NaHCO3 and pH 9.5. High concentration NaHCO3 (e.g. 160 mM) was inhibitive to cell growth but stimulating to lipid accumulation and caused unicellular C. vulgaris to transfer to colonial cells. Increasing pH in the range of 7.5-9.5 caused increasing inhibition to cell growth in 160 mM NaCl. Whereas the optimal pH for cell growth was 8.5 for 160 mM NaHCO3 cultures. Comparative experiments with 0-160 mM NaHCO3 indicate that 10 mM was the optimal concentration and increasing NaHCO3 from 10 to 160 mM caused increasing inhibition to cell growth. CONCLUSIONS: High concentration DIC was inhibitor to cell growth but stimulator to lipid accumulation of C. vulgaris. It caused unicellular C. vulgaris to transform to colonial cells. Results suggest that high concentration of a particular DIC species, i.e., dCO2, was the primary stress responsible for cell growth inhibition. Where CO32- was likely the DIC species responsible for lipid stimulation of C. vulgaris. Furthermore, we propose that the colony formation at high DIC conditions was employed by C. vulgaris to mitigate the stress by minimizing cell exposure to unfavorable environment.

Isolation and Characterization of Angiotensin I-Converting Enzyme (ACE) Inhibitory Peptides from the Enzymatic Hydrolysate of Carapax Trionycis (the Shell of the Turtle Pelodiscus sinensis).

Carapax Trionycis (the shell of the turtle Pelodiscus sinensis) was hydrolyzed by six different commercial proteases. The hydrolysate prepared from papain showed stronger inhibitory activity against angiotensin I-converting enzyme (ACE) than other extracts. Two noncompetitive ACE inhibitory peptides were purified successively by ultrafiltration, gel filtration chromatography, ion exchange column chromatography, and high-performance liquid chromatography (HPLC). The amino acid sequences of them were identified as KRER and LHMFK, with IC50 values of 324.1 and 75.6 µM, respectively, confirming that Carapax Trionycis is a potential source of active peptides possessing ACE inhibitory activities. Besides, both enzyme kinetics and isothermal titration calorimetry (ITC) assay showed that LHMFK could form more stable complex with ACE than KRER, which is in accordance with the better inhibitory activity of LHMFK.

Protozoa inhibition by different salts: Osmotic stress or ionic stress?

Cell density and morphology changes were tested to examine the effects of salts including NaHCO3 , NaCl, KHCO3 , and KCl at 160 mM on protozoa. It was demonstrated that ionic stress rather than osmotic stress led to protozoa cell death and NaHCO3 was shown to be the most effective inhibitor. Deformation of cells and cell shrinkage were observed when protozoan cells were exposed to polyethylene glycol (PEG) or any of the salts. However, while PEG treated cells could fully recover in both number and size, only a small portion of the salt-treated cells survive and cell size was 36-58% smaller than the regular. The disappearance of salt-treated protozoa cells was hypothetically attributed to disruption of the cytoplasmic membrane of these cells. It is further hypothesized that the PEG-treated protozoan cells carried out regulatory volume increase (RVI) after the osmotic shock but the RVI of salt-treated protozoa was hurdled to varied extents. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1418-1424, 2017.

N-Doped porous graphitic carbon with multi-flaky shell hollow structure prepared using a green and 'useful' template of CaCO3 for VOC fast adsorption and small peptide enrichment.

High N-doped porous graphitic carbons (S-NPGCs) with multi-flaky shell hollow structure were prepared by using CaCO3 as a green/useful template. S-NPGCs exhibit very fast adsorption for toluene (31 times that of HKUST-1) and effectively selective enrichment of small peptides with high inhibitory activity of angiotensin converting enzymes.

Separation and Characterization of Angiotensin I Converting Enzyme (ACE) Inhibitory Peptides from Saurida elongata Proteins Hydrolysate by IMAC-Ni2.

Lizard fish protein hydrolysates (LFPH) were prepared from Lizard fish (Saurida elongata) proteins possessing powerful angiotensin I converting enzyme (ACE) inhibitory activity and the fraction (LFPH-I) with high ACE inhibitory activity was obtained through ultrafiltration. The active Fraction (F2) was isolated from LFPH-I using immobilized metal affinity chromatography (IMAC-Ni2+). Analysis of amino acid levels revealed that F2 eluted from IMAC was enriched in Met, His, Tyr, Pro, Ile, and Leu compared to the crude peptide LFPH-I. F2 with the high ACE inhibitory activity (IC50 of 0.116 mg·mL-1) was further separated by a reverse-phase column to yield a novel ACE inhibitory peptide with IC50 value of 52 µM. The ACE inhibitory peptide was identified as Arg-Tyr-Arg-Pro, RYRP. The present study demonstrated that IMAC may be a useful tool for the separation of ACE inhibitory peptides from protein hydrolysate.

Facile synthesis of hierarchical N-doped hollow porous carbon whiskers with ultrahigh surface area via synergistic inner-outer activation for casein hydrolysate adsorption.

N-doped hollow porous carbon materials have attracted significant scientific interest in the field of peptide adsorption, drug delivery and catalysis. However, their facile synthesis is still a challenge due to the lack of an ideal template and effective route for high specific surface area (SSA). In this work, we report a facile approach for preparing N-doped hollow porous carbon whiskers (HPCWs) by using CaCO3 whiskers as a green template and double inner-activating agent. Two inner activators, CO2 and Ca(OH)2, are generated from the CaCO3 whisker template during the carbonization process. Among them, Ca(OH)2 was formed by H2O vapors reacting with the remaining template CaO. Attributed to the drastic synergistic effect of inner-activation (CO2 or Ca(OH)2) and outer-activation (KOH), the synthesized HPCWs exhibit ultrahigh SSA (3007 m2 g-1), the largest pore volume (2.63 cm3 g-1) and a controllable proportion of micropores (Sm/St, 60-86%). These intriguing pore structure characteristics of HPCWs endow with them rich target-oriented applications, as exemplified by their outstanding adsorption for casein hydrolysate (10 080 mg g-1), which is two orders of magnitude (102) higher than that of common porous materials. This facile and green synthesis strategy may pave a new way to prepare hollow porous carbon materials with the desired pore structure and high surface area for numerous applications.

[Determination of the Amino Acids in the Raw and Processed Products of Turtle Shell by HPLC Combining Pre-column Derivatization].

Objective: To establish the pre-column derivatization combining HPLC to determine the contents of the amino acids of the raw and processed products of Turtle shell. Methods: The samples were prepared by the acidic hydrolysis method, derivatized by OPA and FMOC, and analyzed by C18 column with gradient elution. Results: 18 kinds of amino acids were separated within 38 min, which showed a good linear relationship( r ≥0. 9991). The average recoveries of 16 amino acids in the samples were between 90. 43% ~110. 69%,and the RSD were between 0. 76% ~ 5. 89%( n = 6). Conclusion: This method can be used to determine the contents of the amino acids in the raw and processed products of Turtle shell.