The application of a multi-component reaction peptide as a model regenerative active to enhance skin wound-healing postlaser procedure in a double-blinded placebo-controlled clinical trial.

INTRODUCTION: Esthetic procedures are currently among the most effective options for consumers seeking to correct aging signs such as fine lines, wrinkles, and skin tone unevenness. Currently, there is a scientific need for an adjunct active to be paired with esthetic procedures to encourage wound recovery and address postprocedure pigmentation concerns. OBJECTIVE: Toward that goal, this study assessed the efficacy of a peptide created from a multi-component reaction (multi-component peptide, MCP) as a model active for postprocedure care and evaluated its ability to promote skin healing in an ablative laser-induced wound model on the forearm. METHODS: The mechanism of action of MCP was investigated using tubo assays, 2D melanocyte, and fibroblast cultures, reconstructed skin equivalents, and ex vivo skin explants. The MCP formula and the clinical benchmark formula of Aquaphor were assessed head-to-head by applying the products topically in an ablative laser-induced wound model (n = 20 subjects). The promotion of wound healing was evaluated by the investigator assessment of epithelial confluence, crusting or scabbing, general wound appearance, erythema, and edema. RESULTS: MCP was determined to be beneficial to postprocedure skin recovery and healing by four main mechanisms of action: barrier repair as determined in an ex vivo tape-stripping model, reduction of inflammation and postinflammatory hyperpigmentation, reduction of elastase activity, and stimulation of fibroblast through the mTOR pathway. The formula containing 10% MCP enhanced the kinetics of epithelial confluence and improvement of the crusting or scabbing appearance of the laser-generated wounds in a laser-induced mini-zone wound healing study on the forearm. CONCLUSION: This study demonstrates the use of MCP as a proof of concept regenerative active that when incorporated into an optimized postprocedure skincare formula can improve skin healing and enhance the appearance of skin after injury with relevance to ablative aesthetic procedures.

The Development of Human Ex Vivo Models of Inflammatory Skin Conditions.

Traditional research in inflammatory dermatoses has relied on animal models and reconstructed human epidermis to study these conditions. However, these models are limited in replicating the complexity of real human skin and reproducing the intricate pathological changes in skin barrier components and lipid profiles. To address this gap, we developed experimental models that mimic various human inflammatory skin phenotypes. Human ex vivo skins were stimulated with various triggers, creating models for inflammation-induced angiogenesis, irritation response, and chronic T-cell activation. We assessed the alterations in skin morphology, cellular infiltrates, cytokine production, and epidermal lipidomic profiles. In the pro-angiogenesis model, we observed increased mast cell degranulation and elevated levels of angiogenic growth factors. Both the irritant and chronic inflammation models exhibited severe epidermal disruption, along with macrophage infiltration, leukocyte exocytosis, and heightened cytokine levels. Lipidomic analysis revealed minor changes in the pro-angiogenesis model, whereas the chronic inflammation and irritant models exhibited significant decreases in barrier essential ceramide subclasses and a shift toward shorter acyl chain lengths (

Poroelastic behavior and water permeability of human skin at the nanoscale.

Topical skin care products and hydrating compositions (moisturizers or injectable fillers) have been used for years to improve the appearance of, for example facial wrinkles, or to increase "plumpness". Most of the studies have addressed these changes based on the overall mechanical changes associated with an increase in hydration state. However, little is known about the water mobility contribution to these changes as well as the consequences to the specific skin layers. This is important as the biophysical properties and the biochemical composition of normal stratum corneum, epithelium, and dermis vary tremendously from one another. Our current studies and results reported here have focused on a novel approach (dynamic atomic force microscopy-based nanoindentation) to quantify biophysical characteristics of individual layers of ex vivo human skin. We have discovered that our new methods are highly sensitive to the mechanical properties of individual skin layers, as well as their hydration properties. Furthermore, our methods can assess the ability of these individual layers to respond to both compressive and shear deformations. In addition, since human skin is mechanically loaded over a wide range of deformation rates (frequencies), we studied the biophysical properties of skin over a wide frequency range. The poroelasticity model used helps to quantify the hydraulic permeability of the skin layers, providing an innovative method to evaluate and interpret the impact of hydrating compositions on water mobility of these different skin layers.

Characterization of an ablative fractional CO2 laser-induced wound-healing model based on in vitro 3D reconstructed skin.

OBJECTIVE: This study describes the development and characterization of a novel in vitro wound-healing model based on a full-thickness reconstructed skin by exposing the tissue to fractional ablative laser treatment. METHOD: A 3D full-thickness skin model was fabricated and treated with fractional ablative CO2 laser. Wound-healing process was characterized by HE staining, noninvasive OCT imaging, immunostaining, as well as transepidermal water loss measurement. Cytokines and proteins involved in the inflammatory and dermal remodeling process were studied by ELISA and protein array assays. RESULTS: Fractional ablative CO2 treatment induced a wound zone of 9 mm in diameter, containing 56 micro-wounds with 200 µm diameter and 500-700 µm in depth on reconstructed full-thickness skin model. HE staining revealed a typical wound morphology and healing process with migration of keratinocytes, formation and extrusion of necrotic tissue, and cell inclusion in dermis, which correlates with clinical observations. Based on OCT and TEWL measurements, the re-epithelialization took place over 2 days. Laser-triggered keratinocytes proliferation and differentiation were demonstrated by activated Ki67 and Filaggrin expression respectively. Injury-invoked cytokine ICAM-1 showed instant upregulation on Day 1. Decreased epidermis thickness and depression of IGFBP-2 protein level synergistically indicated the unavoidable thermal side effects from laser treatment. Downregulated DKK-1 protein level and upregulation of α-SMA together implicated the risk of potential fibrosis post-laser treatment. CONCLUSION: This in vitro laser wounded reconstructed skin model captured the key events of wound-healing process, could be used to investigate the mechanisms of wound-healing triggered by a commonly used beauty procedure, and also provides a valuable tool for evaluating the efficacy of novel actives for the post-procedure application.

Utilization of ex vivo tissue model to study skin regeneration following microneedle stimuli.

Microneedling is a popular skin resurfacing and rejuvenation procedure. In order to develop better adjunct products for consumers, there is a scientific need to establish greater understanding of the mechanism in which microneedling stimulates regeneration within skin. The purpose of this study is to develop a physiologically relevant ex vivo tissue model which closely mimics the actual microneedling procedure to elucidate its mechanism of action. In this study, human ex vivo skin was subjected to microneedling treatment and cultured for 6 days. Histological analysis demonstrated that the ex vivo skin was able to heal from microneedling injury throughout the culture period. Microneedling treatment stimulated proliferation and barrier renewal of the skin. The procedure also increased the levels of inflammatory cytokines and angiogenic growth factors in a dynamic and time dependent fashion. The tissue demonstrated hallmark signs of epidermal regeneration through morphological and molecular changes after the treatment. This is one of the first works to date that utilizes microneedled ex vivo skin to demonstrate its regenerative behavior. Our model recapitulates the main features of the microneedling treatment and enables the evaluation of future cosmetic active ingredients used in conjunction with microneedling.

Alteration to the Skin Ceramide Profile Following Broad-Spectrum UV Exposure.

The epidermal stratum corneum (SC) lipid matrix, principally consisting of an equimolar ratio of ceramides, free fatty acids, and cholesterol, plays a crucial role in maintaining proper skin barrier function. Conditions which impair barrier integrity, such as in atopic dermatitis, correlate with the alternation of key ceramide subclasses and reduced chain length of acyl moieties. However, there is limited knowledge about the impact of unprotected repeat sun exposure on the skin lipid composition, especially ceramide profiles.This study investigated the effects of ultraviolet (UV) radiation on the ceramide profile using both an ex vivo skin and a clinical model. Lipidomic analysis of UV-exposed skin showed shifts to the composition of ceramide subclasses essential in repairing and strengthening the SC barrier (including CER1[EOS], CER3[NP], and CER6[AP]) and reduced very long-chain acyl moieties. Gene expression analysis and immunohistochemical staining of key enzymes (aSMase, DES1, CerS5, CerS3) suggested that lipid alterations can be attributed to changes within the ceramide biosynthesis process. Topical application of ceramide-containing suncare products help maintain SC-essential ceramide subclasses and proper ceramide chain length, demonstrating the importance of proper photoprotection to maintain healthy skin barrier and ceramide quality during daily sun exposure. J Drugs Dermatol. 2022;21(1):77-85. doi:10.36849/JDD.6331.

ARTICLE: Evolution of Skin Barrier Science for Healthy and Compromised Skin.

Skin is a complex organ comprised of multiple cell types and microstructures that work in concert to serve critical functions and support the body’s homeostasis. It is the outermost, cornified layer of our body that is primarily responsible for the permeability barrier, protecting against external aggressors and preventing water loss from within. The understanding of the organization, functionality, and underlying mechanisms of the skin barrier has evolved greatly through the years. The formation of an intact and well-maintained stratum corneum (SC), where the permeability barrier resides, relies heavily on the differentiation of epidermal keratinocytes and the synthesis, release, localization, and binding of lipids that include principally ceramides, cholesterol, and free fatty acids. The in-depth research on SC barrier, its disruption in the pathogenesis of diseases, as well as on barrier responses to environmental insults, has enabled the development of modern therapeutics and topical care routines. Among them, ceramide-containing moisturizers have clinically demonstrated the ability to support the management of skin conditions such as atopic dermatitis and psoriasis by reducing the disease severity and recurrence and improving the patients’ perception of overall skin quality and health. This review focuses on the contributions of various barrier constituents to skin barrier function in health and pathological conditions, and how topical interventions containing essential barrier lipids support barrier restoration and provide relief. J Drugs Dermatol. 20(4 Suppl):s3-9. doi:10.36849/JDD.S589A.

ARTICLE: Alteration to the Skin Barrier Integrity Following Broad-Spectrum UV Exposure in an Ex Vivo Tissue Model.

Dynamic changes to the skin barrier’s molecular structure and ceramide profile are well-documented in skin conditions such as atopic dermatitis and psoriasis. Pathological and environmental factors have been shown to impair barrier integrity and demonstrate shifts in ceramide composition in the skin. However, the relationship between acute and prolonged sun exposure and its effects on skin barrier homeostasis is insufficiently investigated. This study aims to uncover new scientific evidence to elucidate the relationship of UV irradiation with the skin barrier using an ex vivo tissue model following simulated UVA/UVB exposure. Fresh ex vivo human skin pretreated either with or without a broad-spectrum sunscreen was exposed to either a physiological or elevated UV condition. Following eight days in culture, structural and molecular changes were evaluated. UV irradiated skin displayed epidermal cell death and altered expression of key barrier proteins. TEM analysis demonstrated disruption to adherens junctions and dissociation between tissue layers following both physiological and extensive UV exposures. An effective broad-spectrum sunscreen containing essential skin ceramides completely protected the skin from such changes. This is one of the first works demonstrating a clear correlation of altered skin barrier integrity using a physiologically relevant dose in an ex vivo tissue model. Our findings also further support the additional importance and benefits of sun protection among the consumers. J Drugs Dermatol. 20(4 Suppl):s23-28. doi:10.36849/JDD.S589D.

ARTICLE: Models to Study Skin Lipids in Relation to the Barrier Function: A Modern Update on Models and Methodologies Evaluating Skin Barrier Function.

The skin barrier is a multifaceted microenvironment, comprised not only of structural and molecular components that maintain its integrity, but also a lipid matrix comprising an equimolar ratio of cholesterol, free fatty acids, and ceramides. Lipid abnormalities induced by environmental or pathological stimuli are often associated with impaired skin barrier function and integrity. Incorporation of skin lipids in skincare formulations to help fortify barrier function has become widespread. While there are resources available to study the barrier, a comprehensive evaluation of skin models, from in situ to in vivo, that focus on alterations of the lipid content, seems to be lacking. This article reviews current methods to evaluate the skin lipid barrier and touches upon the significance of using such models within the cosmetic field to study formulations that incorporate barrier lipids. J Drugs Dermatol. 20(4 Suppl):s10-16. doi:10.36849/JDD.S589B.

Long-Term Benefits of Daily Photo-Protection With a Broad-Spectrum Sunscreen in United States Hispanic Female Population.

aThe Vitiligo and Pigmentation Institute of Southern California, Los Angeles, CA bDepartment of Dermatology, Howard University, Washington, DC cL’Oreal Research and Innovation, Paris, France dL’Oreal Research and Innovation, Clark, NJ.

Effects of Imprinted 3D Surface Patterning on Localized Changes in the Tribology of Human Stratum Corneum.

Natural surfaces may exhibit remarkable surface properties due to their structure. In the case of skin, its surface topography (microrelief) influences many of its perceived sensorial properties (shine, color, touch). Imprinted patterns can modify the original microrelief, inducing a completely new set of perceived properties. To explore the effects of superimposed biomimetic surface textures on the friction of skin, human stratum corneum was prepared with and without an imprinted regular, micrometer-sized, 3D grid pattern. Atomic Force Microscopy (AFM) and optical profilometry indicated that the inherent, smaller-scale roughness of the stratum corneum remained when lines with heights of 20-200 µm and spacings of 600-2000 µm were introduced, but it was somewhat reduced on the grid lines. Surface Forces Apparatus (SFA) friction experiments on stratum corneum were performed at low speed (µm/s, back-and-forth sliding) and at more realistic, high speed (cm/s, rotational sliding). Two stratum corneum surfaces in contact did not adhere to one another, and they had a friction coefficient µ of 0.1, or lower, at low sliding speed. An interesting loading-unloading hysteresis was observed, with lower friction force on unloading, in particular, when the contact was on a grid line of the patterned samples. This suggests that the patterning locally induced different mechanical properties of the stratum corneum and that its recovery was not immediate on unloading. When one stratum corneum surface slid against a rigid glass surface, the friction coefficient was always higher than that when two stratum corneum surfaces were in contact. At high sliding speed, much higher friction coefficients were found between one stratum corneum surface and a rigid, smooth surface, µ ≥ 1. The results demonstrate that topograpic patterning by imprinting clearly modifies the tribological response of stratum corneum. This approach provides a simple method for exploring the development of biomimetic modifications of skin texture.

Preclinical evaluations of acellular biological conduits for peripheral nerve regeneration.

Various types of natural biological conduits have been investigated as alternatives to the current surgical standard approach for peripheral nerve injuries. Autologous nerve graft, the current gold standard for peripheral nerve damage, is limited by clinical challenges such as donor-site morbidity and limited availability. The purpose of this study was to evaluate the efficacy of using acellular xenographic conduits (nerve, artery, and dermis) for the repair of a 1.2 cm critical size defect of peripheral nerve in a rodent model. Four months post surgery, the animal group receiving acellular artery as a nerve conduit showed excellent physiological outcome in terms of the prevention of muscle atrophy and foot ulcer. Histological assessment of the bridged site revealed excellent axon regeneration, as opposed to the nonrepaired control group or the group receiving dermal conduit. Finally, the study evaluated the potential improvement via the addition of undifferentiated mesenchymal stem cells into the artery conduit during the bridging procedure. The mesenchymal stem cell-dosed artery conduit group resulted in significantly higher concentration of regenerated axons over artery conduit alone, and exhibited accelerated muscle atrophy rescue. Our results demonstrated that xenographic artery conduits promoted excellent axonal regeneration with highly promising clinical relevance.

Composite three-dimensional woven scaffolds with interpenetrating network hydrogels to create functional synthetic articular cartilage.

The development of synthetic biomaterials that possess mechanical properties that mimic those of native tissues remains an important challenge to the field of materials. In particular, articular cartilage is a complex nonlinear, viscoelastic, and anisotropic material that exhibits a very low coefficient of friction, allowing it to withstand millions of cycles of joint loading over decades of wear. Here we show that a three-dimensionally woven fiber scaffold that is infiltrated with an interpenetrating network hydrogel can provide a functional biomaterial that provides the load-bearing and tribological properties of native cartilage. An interpenetrating dual-network "tough-gel" consisting of alginate and polyacrylamide was infused into a porous three-dimensionally woven poly(ε-caprolactone) fiber scaffold, providing a versatile fiber-reinforced composite structure as a potential acellular or cell-based replacement for cartilage repair.

Efficacy of engineered FVIII-producing skeletal muscle enhanced by growth factor-releasing co-axial electrospun fibers.

Co-axial electrospun fibers can offer both topographical and biochemical cues for tissue engineering applications. In this study, we demonstrate the sustained treatment of hemophilia through a non-viral, tissue engineering approach facilitated by growth factor-releasing co-axial electrospun fibers. FVIII-producing skeletal myotubes were first engineered on aligned electrospun fibers in vitro, followed by implantation in hemophilic mice with or without a layer of core-shell electrospun fibers designed to provide sustained delivery of angiogenic or lymphangiogenic growth factors, which serves to stimulate the lymphatic or vascular systems to enhance the FVIII transport from the implant site into systemic circulation. Upon subcutaneous implantation into hemophilic mice, the construct seamlessly integrated with the host tissue within one month, and specifically induced either vascular or lymphatic network infiltration in accordance with the growth factors released from the electrospun fibers. Engineered constructs that induced angiogenesis resulted in sustained elevation of plasma FVIII and significantly reduced blood coagulation time for at least 2-months. Biomaterials-assisted functional tissue engineering was shown in this study to offer protein replacement therapy for a genetic disorder such as hemophilia.

Electrosprayed core-shell microspheres for protein delivery.

This communication describes a single-step electrospraying technique that generates core-shell microspheres (CSMs) with encapsulated protein as the core and an amphiphilic biodegradable polymer as the shell. The protein release profiles of the electrosprayed CSMs showed steady release kinetics over 3 weeks without a significant initial burst.

Electrohydrodynamics: A facile technique to fabricate drug delivery systems.

Electrospinning and electrospraying are facile electrohydrodynamic fabrication methods that can generate drug delivery systems (DDS) through a one-step process. The nanostructured fiber and particle morphologies produced by these techniques offer tunable release kinetics applicable to diverse biomedical applications. Coaxial electrospinning/electrospraying, a relatively new technique of fabricating core-shell fibers/particles have added to the versatility of these DDS by affording a near zero-order drug release kinetics, dampening of burst release, and applicability to a wider range of bioactive agents. Controllable electrospinning/spraying of fibers and particles and subsequent drug release from these chiefly polymeric vehicles depends on well-defined solution and process parameters. The additional drug delivery capability from electrospun fibers can further enhance the material's functionality in tissue engineering applications. This review discusses the state-of-the-art of using electrohydrodynamic technique to generate nanofiber/particles as drug delivery devices.

Sustained viral gene delivery through core-shell fibers.

Although viral gene transfer is efficient in achieving transgene expression for tissue engineering, drawbacks of virus dissemination, toxicity and transient gene expression due to immune response have hindered its widespread application. Many tissue engineering studies thus opt to genetically engineer cells in vitro prior to their introduction in vivo. However, it would be attractive to obviate the need for in vitro manipulation by transducing the infiltrating progenitor cells in situ. This study introduces the fabrication of a virus-encapsulated electrospun fibrous scaffold to achieve sustained and localized transduction. Adenovirus encoding the gene for green fluorescent protein was efficiently encapsulated into the core of poly(epsilon-caprolactone) fibers through co-axial electrospinning and was subsequently released via a porogen-mediated process. HEK 293 cells seeded on the scaffolds expressed high level of transgene expression over a month, while cells inoculated by scaffold supernatant showed only transient expression for a week. RAW 264.7 cells cultured on the virus-encapsulated fibers produced a lower level of IL-1 beta, TNF-alpha and IFN-alpha, suggesting that the activation of macrophage cells by the viral vector was reduced when encapsulated in the core-shell PCL fibers. In demonstrating sustained and localized cell transduction, this study presents an attractive alternative mode of applying viral gene transfer for regenerative medicine.

Effect of Electromechanical Stimulation on the Maturation of Myotubes on Aligned Electrospun Fibers.

Tissue engineering may provide an alternative to cell injection as a therapeutic solution for myocardial infarction. A tissue-engineered muscle patch may offer better host integration and higher functional performance. This study examined the differentiation of skeletal myoblasts on aligned electrospun polyurethane (PU) fibers and in the presence of electromechanical stimulation. Skeletal myoblasts cultured on aligned PU fibers showed more pronounced elongation, better alignment, higher level of transient receptor potential cation channel-1 (TRPC-1) expression, upregulation of contractile proteins and higher percentage of striated myotubes compared to those cultured on random PU fibers and film. The resulting tissue constructs generated tetanus forces of 1.1 mN with a 10-ms time to tetanus. Additional mechanical, electrical, or synchronized electromechanical stimuli applied to myoblasts cultured on PU fibers increased the percentage of striated myotubes from 70 to 85% under optimal stimulation conditions, which was accompanied by an upregulation of contractile proteins such as α-actinin and myosin heavy chain. In describing how electromechanical cues can be combined with topographical cue, this study helped move towards the goal of generating a biomimetic microenvironment for engineering of functional skeletal muscle.

Tissue compatibility of interfacial polyelectrolyte complexation fibrous scaffold: evaluation of blood compatibility and biocompatibility.

Interfacial polyelectrolyte complexation (PEC) fiber has been proposed as a biostructural unit and biological construct for tissue engineering applications, with its ability to incorporate proteins, drug molecules, DNA nanoparticles, and cells. In this study, we evaluated the biocompatibility and blood compatibility of PEC fiber in order to assess its potential for in vivo applications in tissue engineering. Although chitosan-alginate PEC fibrous scaffold was found to be thrombogenic, the blood compatibility of the scaffold could be significantly improved by incorporating a small amount of heparin in the polyelectrolyte solution during fiber formation. The platelet microparticle production and platelet adhesion on the chitosan-alginate-heparin fibrous scaffold were comparable to those on the resting control. In vitro cytotoxicity test showed that the scaffold was not toxic to human mesenchymal stem cells (hMSCs). In the in vivo biocompatibility test in rats, no acute inflammation was observed in the subcutaneously or intramuscularly implanted specimens. Good cell infiltration and vascularization were observed after 2 months of implantations. Enhanced extracellular matrix (ECM) deposition was observed when hMSCs were cultured in the transforming growth factor-beta3 (TGF-beta3)-encapsulated PEC fibrous scaffold in vitro, or when the TGF-beta3-encapsulated PEC was implanted intramuscularly in vivo. The results showed that this versatile PEC fibrous scaffold could be used in various tissue engineering applications for its good biocompatible and blood compatible properties.

Proliferation and differentiation of human mesenchymal stem cell encapsulated in polyelectrolyte complexation fibrous scaffold.

A biofunctional scaffold was constructed with human mesenchymal stem cells (hMSCs) encapsulated in polyelectrolyte complexation (PEC) fibers. Human MSCs were either encapsulated in PEC fibers and constructed into a fibrous scaffold or seeded on PEC fibrous scaffolds. The proliferation, chondrogenic and osteogenic differentiation of the encapsulated and seeded hMSCs were compared for a culture period of 5.5 weeks. Gene expression and extracellular matrix production showed evidences of chondrogenesis and osteogenesis in the cell-encapsulated scaffolds and cell-seeded scaffolds when the samples were cultured in the chondrogenic and osteogenic differentiation media, respectively. However, better cell proliferation and differentiation were observed on the hMSC-encapsulated scaffolds compared to the hMSC-seeded scaffolds. The study demonstrated that the cell-encapsulated PEC fibers could support proliferation and chondrogenic and osteogenic differentiation of the encapsulated-hMSCs. Together with our previous works, which demonstrated the feasibility of PEC fiber in controlled release of drug, protein and gene delivery, the reported PEC fibrous scaffold system will have the potential in composing a multi-component system for various tissue-engineering applications.