Printed Electronics Based on 2D Material Inks: Preparation, Properties, and Applications toward Memristors.

Printed electronics, which fabricate electrical components and circuits on various substrates by leveraging functional inks and advanced printing technologies, have recently attracted tremendous attention due to their capability of large-scale, high-speed, and cost-effective manufacturing and also their great potential in flexible and wearable devices. To further achieve multifunctional, practical, and commercial applications, various printing technologies toward smarter pattern-design, higher resolution, greater production flexibility, and novel ink formulations toward multi-functionalities and high quality have been insensitively investigated. 2D materials, possessing atomically thin thickness, unique properties and excellent solution-processable ability, hold great potential for high-quality inks. Besides, the great variety of 2D materials ranging from metals, semiconductors to insulators offers great freedom to formulate versatile inks to construct various printed electronics. Here, a detailed review of the progress on 2D material inks formulation and its printed applications has been provided, specifically with an emphasis on emerging printed memristors. Finally, the challenges facing the field and prospects of 2D material inks and printed electronics are discussed.

Growth of Tellurium Nanobelts on h-BN for p-type Transistors with Ultrahigh Hole Mobility.

The lack of stable p-type van der Waals (vdW) semiconductors with high hole mobility severely impedes the step of low-dimensional materials entering the industrial circle. Although p-type black phosphorus (bP) and tellurium (Te) have shown promising hole mobilities, the instability under ambient conditions of bP and relatively low hole mobility of Te remain as daunting issues. Here we report the growth of high-quality Te nanobelts on atomically flat hexagonal boron nitride (h-BN) for high-performance p-type field-effect transistors (FETs). Importantly, the Te-based FET exhibits an ultrahigh hole mobility up to 1370 cm2 V-1 s-1 at room temperature, that may lay the foundation for the future high-performance p-type 2D FET and metal-oxide-semiconductor (p-MOS) inverter. The vdW h-BN dielectric substrate not only provides an ultra-flat surface without dangling bonds for growth of high-quality Te nanobelts, but also reduces the scattering centers at the interface between the channel material and the dielectric layer, thus resulting in the ultrahigh hole mobility .

Fabrication of a Mesoporous Multimetallic Oxide-based Ion-Sensitive Field Effect Transistor for pH Sensing.

Sensitive and reliable noninvasive sensors are in demand to cope with an increasing need for robust working conditions and fast results. One of the leading potential technologies is field-effect transistor (FET)-based sensors to improve response time, sensitivity, and stability. Here, a sol-gel method fabricates an ion-sensitive field-effect transistor with a high current and output sensitivity for electrochemical sensing, solving binary device design, component regulating, and long-term stability, while maintaining the promoted sensitivity. Metal oxide-based devices with single and binary contents are fabricated and characterized for monitoring pH changes, with performance fitted to a Nernst-Poisson model. After detecting the performance, the result was compared with devices in different components and ratios to obtain excellent performance and high stability. In addition, these extended gate FETs with multimetallic oxide promise efficiency and stability optimization in terms of a flexible component design, demonstrating the feasibility of the novel sol-gel fabrication method to achieve efficient and reliable FET sensors.

Phase Transitions and Water Splitting Applications of 2D Transition Metal Dichalcogenides and Metal Phosphorous Trichalcogenides.

2D layered materials turn out to be the most attractive hotspot in materials for their unique physical and chemical properties. A special class of 2D layered material refers to materials exhibiting phase transition based on environment variables. Among these materials, transition metal dichalcogenides (TMDs) act as a promising alternative for their unique combination of atomic-scale thickness, direct bandgap, significant spin-orbit coupling and prominent electronic and mechanical properties, enabling them to be applied for fundamental studies as catalyst materials. Metal phosphorous trichalcogenides (MPTs), as another potential catalytic 2D phase transition material, have been employed for their unusual intercalation behavior and electrochemical properties, which act as a secondary electrode in lithium batteries. The preparation of 2D TMD and MPT materials has been extensively conducted by engineering their intrinsic structures at the atomic scale. In this study, advanced synthesis methods of preparing 2D TMD and MPT materials are tested, and their properties are investigated, with stress placed on their phase transition. The surge of this type of report is associated with water-splitting catalysis and other catalytic purposes. This study aims to be a guideline to explore the mentioned 2D TMD and MPT materials for their catalytic applications.

Realization of a non-markov chain in a single 2D mineral RRAM.

The non-Markov process exists widely in thermodymanic process, while it usually requires the packing of many transistors and memories with great system complexity in a traditional device structure to minic such functions. Two-dimensional (2D) material-based resistive random access memory (RRAM) devices have the potential for next-generation computing systems with much-reduced complexity. Here, we achieve a non-Markov chain in an individual RRAM device based on 2D mineral material mica with a vertical metal/mica/metal structure. We find that the potassium ions (K+) in 2D mica gradually move in the direction of the applied electric field, making the initially insulating mica conductive. The accumulation of K+ is changed by an electric field, and the 2D-mica RRAM has both single and double memory windows, a high on/off ratio, decent stability, and repeatability. This is the first time a non-Markov chain process has been established in a single RRAM, in which the movement of K+ is dependent on the stimulated voltage as well as their past states. This work not only uncovers an intrinsic inner ionic conductivity of 2D mica, but also opens the door for the production of such RRAM devices with numerous functions and applications.

Zero-bias mid-infrared graphene photodetectors with bulk photoresponse and calibration-free polarization detection.

Bulk photovoltaic effect (BPVE), featuring polarization-dependent uniform photoresponse at zero external bias, holds potential for exceeding the Shockley-Queisser limit in the efficiency of existing opto-electronic devices. However, the implementation of BPVE has been limited to the naturally existing materials with broken inversion symmetry, such as ferroelectrics, which suffer low efficiencies. Here, we propose metasurface-mediated graphene photodetectors with cascaded polarization-sensitive photoresponse under uniform illumination, mimicking an artificial BPVE. With the assistance of non-centrosymmetric metallic nanoantennas, the hot photocarriers in graphene gain a momentum upon their excitation and form a shift current which is nonlocal and directional. Thereafter, we demonstrate zero-bias uncooled mid-infrared photodetectors with three orders higher responsivity than conventional BPVE and a noise equivalent power of 0.12 nW Hz-1/2. Besides, we observe a vectorial photoresponse which allows us to detect the polarization angle of incident light with a single device. Our strategy opens up alternative possibilities for scalable, low-cost, multifunctional infrared photodetectors.

Interface engineering of two-dimensional transition metal dichalcogenides towards next-generation electronic devices: recent advances and challenges.

Over the past decade, two-dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted tremendous research interest for future electronics owing to their atomically thin thickness, compelling properties and various potential applications. However, interface engineering including contact optimization and channel modulations for 2D TMDCs represents fundamental challenges in ultimate performance of ultrathin electronics. This article provides a comprehensive overview of the basic understanding of contacts and channel engineering of 2D TMDCs and emerging electronics benefiting from these varying approaches. In particular, we elucidate multifarious contact engineering approaches such as edge contact, phase engineering and metal transfer to suppress the Fermi level pinning effect at the metal/TMDC interface, various channel treatment avenues such as van der Waals heterostructures, surface charge transfer doping to modulate the device properties, and as well the novel electronics constructed by interface engineering such as diodes, circuits and memories. Finally, we conclude this review by addressing the current challenges facing 2D TMDCs towards next-generation electronics and offering our insights into future directions of this field.

Employing a Bifunctional Molybdate Precursor To Grow the Highly Crystalline MoS2 for High-Performance Field-Effect Transistors.

Growth of the large-sized and high-quality MoS2 single crystals for high-performance low-power electronic applications is an important step to pursue. Despite the significant improvement made in minimizing extrinsic MoS2 contact resistance based on interfacial engineering of the devices, the electron mobility of field-effect transistors (FETs) made of a synthetic monolayer MoS2 is yet far below the expected theoretical values, implying that the MoS2 crystal quality needs to be further improved. Here, we demonstrate the high-performance two-terminal MoS2 FETs with room-temperature electron mobility up to ∼90 cm2 V-1 s-1 based on the sulfurization growth of the bifunctional precursor, sodium molybdate dihydrate. This unique transition-metal precursor, serving as both the crystalline Mo source and seed promotor (sodium), could facilitate the lateral growth of the highly crystalline monolayer MoS2 crystals (edge length up to ∼260 µm). Substrate surface treatment with oxygen plasma prior to the deposition of the Mo precursor is fundamental to increase the wettability between the Mo source and the substrate, promoting the thinning and coalescence of the source clusters during the growth of large-sized MoS2 single crystals. The control of growth temperature is also an essential step to grow a strictly monolayer MoS2 crystal. A proof-of-concept for thermoelectric device integration utilizing monolayer MoS2 sheds light on its potential in low-voltage and self-powered electronics.

Waveguide-Integrated Black Phosphorus Photodetector for Mid-Infrared Applications.

Midinfrared (MIR), which covers numerous molecular vibrational fingerprints, has attracted enormous research interest due to its promising potential for label-free and damage-free sensing. Despite intense development efforts, the realization of waveguide-integrated on-chip sensing system has seen very limited success to date. The huge lattice mismatch between silicon and the commonly used detection materials such as HgCdTe, III-V, or II-VI compounds has been the key bottleneck that hinders their integration. Here, we realize an integration of silicon-on-insulator (SOI) waveguides with black phosphorus (BP) photodetectors. When operating near BP's cutoff wavelength where absorption is weak, the light-BP interaction is enhanced by exploiting the optical confinement in the Si waveguide and grating structure to overcome the limitation of absorption length constrained by the BP thickness. Devices with different BP crystal orientation and thickness are compared in terms of their responsivity and noise equivalent power (NEP). Spectral photoresponse from 3.68 to 4.03 µm was investigated. Additionally, power-dependent responsivity and gate-tunable photocurrent were also studied. At a bias of 1 V, the BP photodetector achieved a responsivity of 23 A/W at 3.68 µm and 2 A/W at 4 µm and a NEP less than 1 nW/Hz1/2 at room temperature. The integration of passive Si photonics and active BP photodetector is envisaged to offer a potential pathway toward the realization of integrated on-chip systems for MIR sensing applications.

Efficient and reliable surface charge transfer doping of black phosphorus via atomic layer deposited MgO toward high performance complementary circuits.

Black phosphorus (BP), a fast emerging 2D material, has shown great potential in future electronics and optoelectronics owing to its outstanding properties including sizable band gap and ambipolar transport characteristics. However, its hole conduction dominance, featured by a much larger hole mobility and the corresponding on-current than that of the electrons, renders the reliable modulation of its carrier type and density a key challenge, thereby hindering its application to complementary electronics. Here, we demonstrate an efficient and reliable n-type doping for BP transistors via surface functionalization by atomic layer deposited magnesium oxide (MgO) with favorable controllability. By optimizing the MgO thickness, an electron mobility of up to 95.5 cm2 V-1 s-1 is reached with a simultaneous significant suppression of hole conduction. Subsequently, a high-performance complementary logic inverter is demonstrated within a single BP flake, which operates well with a supply voltage as low as <0.5 V, outperforming reported BP inverters in terms of logic level match, power consumption and process feasibility. Our findings suggest that surface charge transfer doping via MgO can be used as a promising technique towards high performance BP-based functional nanoelectronics.

Low-Frequency Noise in Layered ReS2 Field Effect Transistors on HfO2 and Its Application for pH Sensing.

Layered rhenium disulfide (ReS2) field effect transistors (FETs), with thickness ranging from few to dozens of layers, are demonstrated on 20 nm thick HfO2/Si substrates. A small threshold voltage of -0.25 V, high on/off current ratio of up to ∼107, small subthreshold swing of 116 mV/dec, and electron carrier mobility of 6.02 cm2/V·s are obtained for the two-layer ReS2 FETs. Low-frequency noise characteristics in ReS2 FETs are analyzed for the first time, and it is found that the carrier number fluctuation mechanism well describes the flicker (1/f) noise of ReS2 FETs with different thicknesses. pH sensing using a two-layer ReS2 FET with HfO2 as a sensing oxide is then demonstrated with a voltage sensitivity of 54.8 mV/pH and a current sensitivity of 126. The noise characteristics of the ReS2 FET-based pH sensors are also examined, and a corresponding detection limit of 0.0132 pH is obtained. Our studies suggest the high potential of ReS2 for future low-power nanoelectronics and biosensor applications.