Prognostic value of post-percutaneous coronary intervention diastolic pressure ratio.

AIM: To evaluate the distribution of a generic diastolic pressure ratio (dPR) after angiographically successful percutaneous coronary intervention (PCI) and to assess its association with the 2­year incidence of target vessel failure (TVF), defined as a composite of cardiac mortality, target vessel revascularisation, target vessel myocardial infarction and stent thrombosis. METHODS: The dPR SEARCH study is a post hoc analysis of the prospective single-centre FFR-SEARCH registry, in which physiological assessment was performed after angiographically successful PCI in a total of 1000 patients, using a dedicated microcatheter. dPR was calculated offline with recently validated software in a subset of 735 patients. RESULTS: Mean post-PCI dPR was 0.95 ± 0.06. Post-PCI dPR was ≤ 0.89 in 15.2% of the patients. The cumulative incidence of TVF at 2­year follow-up was 9.4% in patients with a final post-PCI dPR ≤ 0.89 as compared to 6.1% in patients with a post-PCI dPR > 0.89 (adjusted hazard ratio [HR] for dPR ≤ 0.89: 1.53; 95% CI 0.74-3.13; p = 0.249). dPR ≤ 0.89 was associated with significantly higher cardiac mortality at 2 years; adjusted HR 2.40; 95% CI 1.01-5.68; p = 0.047. CONCLUSIONS: In a real-world setting, despite optimal angiographic PCI results, 15.2% of the patients had a final post-PCI dPR of ≤ 0.89, which was associated with a higher incidence of TVF and a significantly higher cardiac mortality rate.

The impact of Fourier-Domain optical coherence tomography catheter induced motion artefacts on quantitative measurements of a PLLA-based bioresorbable scaffold.

Intracoronary Fourier-Domain optical coherence tomography (FD-OCT) enables imaging of the coronary artery within 2-4 seconds, a so far unparalleled speed. Despite such fast data acquisition, cardiac and respiratory motion can cause artefacts due to longitudinal displacement of the catheter within the artery. We studied the influence of longitudinal FD-OCT catheter displacement on serial global lumen and scaffold area measurements in coronary arteries of swine that received PLLA-based bioresorbable scaffolds. In 10 swine, 20 scaffolds (18 × 3.0 mm) were randomly implanted in two epicardial coronary arteries. Serial FD-OCT imaging was performed immediately after implantation (T1) and at 3 (T2) and 6 months (T3) follow-up. Two methods for the selection of OCT cross-sections were compared. Method A did not take into account longitudinal displacement of the FD-OCT catheter. Method B accounted for longitudinal displacement of the FD-OCT catheter. Fifty-one OCT pullbacks of 17 scaffolds were serially analyzed. The measured scaffold length differed between time points, up to one fourth of the total scaffold length, indicating the presence of longitudinal catheter displacement. Between method A and B, low error was demonstrated for mean area measurements. Correlations between measurements were high: R2 ranged from 0.91 to 0.99 for all mean area measurements at all time points. Considerable longitudinal displacement of the FD-OCT catheter was observed, diminishing the number of truly anatomically matching cross-sections in serial investigations. Global OCT dimensions such as mean lumen and scaffold area were not significantly affected by this displacement. Accurate co-registration of cross-sections, however, is mandatory when specific regions, e.g. jailed side branch ostia, are analyzed.

Interstudy reproducibility of the second generation, Fourier domain optical coherence tomography in patients with coronary artery disease and comparison with intravascular ultrasound: a study applying automated contour detection.

Recently, Fourier domain OCT (FD-OCT) has been introduced for clinical use. This approach allows in vivo, high resolution (15 micron) imaging with very fast data acquisition, however, it requires brief flushing of the lumen during imaging. The reproducibility of such fast data acquisition under intracoronary flush application is poorly understood. To assess the inter-study variability of FD-OCT and to compare lumen morphometry to the established invasive imaging method, IVUS. 18 consecutive patients with coronary artery disease scheduled for PCI were included. In each target vessel a FD-OCT pullback (MGH system, light source 1,310 nm, 105 fps, pullback speed 20 mm/s) was acquired during brief (3 s) injection of X-ray contrast (flow 3 ml/s) through the guiding catheter. A second pullback was repeated under the same conditions after re-introduction of the FD OCT catheter into the coronary artery. IVUS and OCT imaging was performed in random order. FD-OCT and IVUS pullback data were analyzed using a recently developed software employing semi automated lumen contour and stent strut detection algorithms. Corresponding ROI were matched based on anatomical landmarks such as side branches and/or stent edges. Inter-study variability is presented as the absolute difference between the two pullbacks. FD-OCT showed remarkably good reproducibility. Inter-study variability in native vessels (cohort A) was very low for mean and minimal luminal area (0.10 ± 0.38, 0.19 ± 0.57 mm(2), respectively). Likewise inter-study variability was very low in stented coronary segments (cohort B) for mean lumen, mean stent, minimal luminal and minimal stent area (0.06 ± 0.08, 0.07 ± 0.10, 0.04 ± 0.09, 0.04 ± 0.10 mm(2), respectively). Comparison to IVUS morphometry revealed no significant differences. The differences between both imaging methods, OCT and IVUS, were very low for mean lumen, mean stent, minimal luminal and minimal stent area (0.10 ± 0.45, 0.10 ± 0.36, 0.26 ± 0.54, 0.05 ± 0.47 mm(2), respectively). FD-OCT shows excellent reproducibility and very low inter-study variability in both, native and stented coronary segments. No significant differences in quantitative lumen morphometry were observed between FD-OCT and IVUS. Evaluating these results suggest that FD-OCT is a reliable imaging tool to apply in longitudinal coronary artery disease studies.

Invasive imaging of the coronary atherosclerotic plaque.

Coronary atherosclerosis has a high prevalence and is known as the leading cause of death worldwide. Clinically, coronary atherosclerosis is routinely evaluated by coronary angiography, which provides a luminogram of the coronary artery and allows for recognizing lumen narrowing. However, angiography does not allow for the direct assessment of the disease process within the coronary vessel wall. Today, a number of catheter-based imaging methods can overcome this shortcoming and provide physicians with additional information on specific morphological components of atherosclerotic lesions. This article discusses the abilities of intravascular imaging techniques such as intravascular ultrasound (IVUS), IVUS-VH, iMAP, integrated backscatter-IVUS, intravascular optical coherence tomography, near-infrared spectroscopy and angioscopy, to diagnose coronary atherosclerosis and their potential to guide clinical decision making.

Thrombotic complication during intracoronary imaging.

Intracoronary imaging with intracoronary ultrasound and coherence tomography is often used in the follow-up of coronary stent implantation. The present case shows an infrequent complication of these procedures, suggesting our continued attention to the selective use of these invasive procedures.

The diagnostic value of intracoronary optical coherence tomography.

Optical coherence tomography (OCT) is a novel light-based imaging modality for application in the coronary circulation. Compared to conventional intravascular ultrasound, OCT has a ten-fold higher image resolution. This advantage has seen OCT successfully applied in the assessment of atherosclerotic plaque, stent apposition, and tissue coverage, heralding a new era in intravascular coronary imaging. The present article discusses the diagnostic value of OCT, both in cardiovascular research as well as in potential clinical application.The unparalleled high image resolution and strong contrast between the coronary lumen and the vessel wall structure enable fast and reliable image interpretation. OCT makes it possible to visualize the presence of atherosclerotic plaque in order to characterize the structure and extent of coronary plaque and to quantify lumen dimensions, as well as the extent of lumen narrowing, in unprecedented detail. Based on optical properties, OCT is able to distinguish different tissue types, such as fibrous, lipid-rich, necrotic, or calcified tissue. Furthermore, OCT is able to cover the visualization of a variety of features of atherosclerotic plaques that have been associated with rapid lesion progression and clinical events, such as thin cap fibroatheroma, fibrous cap thickness, dense macrophage infiltration, and thrombus formation. These unique features allow the use of OCT to assess patients with acute coronary syndrome and to study the dynamic nature of coronary atherosclerosis in vivo and over time. This permits new insights into plaque progression, regression, and rupture, as well as the study of effects of therapies aimed at modulating these developments.Today's OCT technology allows high detail resolution as well as fast and safe clinical image acquisition. These unique features have established OCT as the gold standard for the assessment of coronary stents. This technique makes it possible to study stent expansion, peri-procedural vessel trauma, and the interaction of the stent with the vessel wall down to the level of individual stent struts, both acutely as well as in the long term, where it is has proven extremely sensitive to the detection of even minor amounts of tissue coverage. These qualities render OCT indispensable to addressing vexing clinical questions such as the relationship of drug-eluting stent deployment, vascular healing, the true time course of endothelial stent coverage, and late stent thrombosis. This may also better guide the optimal duration of dual anti-platelet therapy that currently remains unclear and relatively empirical.In the future, OCT might emerge, parallel to its undisputed position in research, as the tool of choice in all clinical scenarios where angiography is limited by its nature as a two-dimensional luminogram.

Optical coherence tomography assessment of the acute effects of stent implantation on the vessel wall: a systematic quantitative approach.

OBJECTIVE: To observe and characterise vessel injury after stenting using optical coherence tomography (OCT), to propose a systematic OCT classification for periprocedural vessel trauma, to evaluate its frequency in stable versus unstable patients and to assess its clinical impact during the hospitalisation period. SETTING: Stenting causes vessel injury. DESIGN AND INTERVENTIONS: All consecutive patients in whom OCT was performed after stent implantation were included in the study. Qualitative and quantitative assessment of tissue prolapse, intra-stent dissection and edge dissection were performed. RESULTS: Seventy-three patients (80 vessels) were analysed. Tissue prolapse within the stented segment was visible in 78/80 vessels (97.5%). Median number of tissue prolapse sites was 8 (IQR 4-19), mean (SD) area 1.04 (0.9) mm(2). Intra-stent dissection flaps were visible in 69/80 vessels (86.3%) (median number 3 (IQR 1.25-6), maximum flap length 450 (220) microm). Fifty-five out of 80 vessels (68.8%) showed dissection cavities (median number 2 (IQR 0-4.75), maximum depth 340 (170) microm). Edge dissection was visible in 20 vessels (mean (SD) length flap 744 (439) microm). The frequency of tissue prolapse or intra-stent dissection was similar in stable and unstable patients (95.6% vs 100%, p = 0.5 for tissue prolapse; 91.1% vs 82.9%, p = 0.3 for intra-stent dissection). There were no events during the hospitalisation period. CONCLUSIONS: OCT allows a detailed visualisation of vessel injury after stent implantation and enables a systematic classification and quantification in vivo. In this study, frequency of tissue prolapse or intra-stent dissections after stenting was high, irrespective of the clinical presentation of the patients, and was not associated with clinical events during hospitalisation.

Seasonal variations of selected herbicides and related metabolites in water, sediment, seaweed and clams in the Sacca di Goro coastal lagoon (Northern Adriatic).

This study assesses the status of Sacca di Goro coastal lagoon (Northern Adriatic, Italy) with respect to watershed pollution. Because 80% of its watershed is devoted to agriculture, plant protection products and their metabolites were found in the water column, sediments (the upper 0-15 cm layer), macroalgae (Ulva rigida) and clams (Tapes philippinarum). Five seasonal sampling campaigns were performed from May 2004 to April 2005 and concentrations measured in five stations in the lagoon and six in the watershed. Relatively high concentrations of the s-triazine - terbuthylazine -, urea herbicides - diuron - and alachlor were detected through the year mainly at stations directly influenced by the Po di Volano inflow. The concentrations of products in use follow a clear seasonal pattern with spring peaks. This pattern is also visible in the sediments as well as in biota. Among metabolites, hydroxylated compounds prevailed, often with concentrations greater than those of the parent compounds. For the most part of the year, the concentrations in biota were close to detection limits, with concentration peaks in spring.

A 3D hydrodynamic fate and transport model for herbicides in Sacca di Goro coastal lagoon (Northern Adriatic).

Sacca di Goro is a shallow coastal microtidal lagoon with a surface area of 26 km2, and an average depth of about 1.5m. Fresh water pollutant loads from Po River branches and several drainage canals lead to anthropogenic eutrophication, frequent summer anoxia crises and chemical contamination. Such events not only affect the lagoon ecosystem but also cause serious economic losses, the lagoon being the second largest producer of clams in Italy. The present work aims at using a fate model coupled with COHERENS 3D hydrodynamic model to simulate and to explain the spatial distribution and temporal variations of s-triazines herbicides in the Sacca di Goro lagoon. The simulation results of spatial and temporal dynamic behaviour of atrazine, simazine and terbuthylazine have been compared with experimental data obtained during an annual monitoring programme.

Intracardiac echocardiographic guidance for hemodynamic assessment in a patient with congenital abnormalities and a prosthetic aortic valve.

In this case report, we present the use of intracardiac echocardiography (ICE) for guiding the cardiac catheterization and subsequent hemodynamic investigation in an unusual patient case with multiple congenital abnormalities (bicuspid aortic valve, left cervical aortic arch, two aortic coarctations) and two aortic valve replacement operations in the past. The ICE catheter (AcuNav) permitted us to accurately and safely puncture the interatrial septum and place the Swan-Ganz catheter in the left ventricle; additionally, visualization of the aortic coarctation in the ascending aorta was also achieved.

Imaging of coronary atherosclerosis and identification of the vulnerable plaque.

Identification of the vulnerable plaque responsible for the occurrence of acute coronary syndromes and acute coronary death is a prerequisite for the stabilisation of this vulnerable plaque. Comprehensive coronary atherosclerosis imaging in clinical practice should involve visualisation of the entire coronary artery tree and characterisation of the plaque, including the three-dimensional morphology of the plaque, encroachment of the plaque on the vessel lumen, the major tissue components of the plaque, remodelling of the vessel and presence of inflammation. Obviously, no single diagnostic modality is available that provides such comprehensive imaging and unfortunately no diagnostic tool is available that unequivocally identifies the vulnerable plaque. The objective of this article is to discuss experience with currently available diagnostic modalities for coronary atherosclerosis imaging. In addition, a number of evolving techniques will be briefly discussed.

Initial observation regarding changes in vessel dimensions after balloon angioplasty and stenting followed by catheter-based beta-radiation. Is stenting necessary in the setting of catheter-based radiotherapy?

AIMS: We sought to compare the effect of intracoronary beta-radiation on the vessel dimensions in de novo lesions using three-dimensional intravascular ultrasound quantification after balloon angioplasty and stenting. METHODS AND RESULTS: Forty patients (44 vessels; 28 balloon angioplasty and 16 stenting) treated with catheter-based beta-radiation and 18 non-irradiated control patients (18 vessels; 10 balloon angioplasty and 8 stenting) were investigated by means of three-dimensional volumetric intravascular ultrasound analysis post-procedure and at 6-8 months follow-up. Total vessel (EEM) volume enlarged after both balloon angioplasty and stenting (+37 mm(3) vs +42 mm(3), P=ns), but vessel wall volume (plaque plus media) also increased similarly (+33 mm(3) vs +49 mm(3), P=ns) in the irradiated patients. Lumen volume remained unchanged in both groups (+3 mm(3) vs -7 mm(3), P=ns). In the stent-covered segments, neointima at follow-up was significantly smaller in the irradiated group than the control group (8 mm(3) vs 27 mm(3), P=0.001, respectively), but the total amount of tissue growth was similar in both groups (33 mm(3) vs 29 mm(3), P=ns). CONCLUSIONS: Intracoronary beta-radiation induces vessel enlargement after balloon angioplasty and/or stenting, accommodating tissue growth. Additional stenting may not play an important role in the prevention of constrictive remodelling in the setting of catheter-based intracoronary beta-radiotherapy.

In vitro study of FFR, QCA, and IVUS for the assessment of optimal stent deployment.

We tested whether fractional flow reserve (FFR) discriminates between suboptimally and optimally deployed stents. Latex tubes (diameter solidus in circle = 4 mm) with diameter stenosis 40% (n = 3), 50% (n = 3) and 60% (n = 3) were tested in a pulsatile flow system, using water. Measurements were done at baseline (n = 9; FFR/QCA) and after suboptimal (SOD; 3-mm balloon at 8 atm) and optimal (OD; 4 mm balloon at 16 atm) deployment of a 35-mm stent (n = 6; FFR/QCA/IVUS). Varying Q from 150 to 50 ml/min increased FFR by 2-7%. Conversely, at 100 ml/min, FFR increased by only 0.8% from SOD to OD (P < 0.05). Extrapolating data to blood flow, the gain in FFR from SOD to OD is less than 5% for Q = 100 ml/min, while FFR may increase by 15-20% by changes in blood flow from 50 to 150 ml/min. We conclude that IVUS and QCA are more appropriate for the assessment of optimal stent deployment.

"Edge Effect" of (32)p radioactive stents is caused by the combination of chronic stent injury and radioactive dose falloff.

BACKGROUND: Radioactive stents have been reported to reduce in-stent neointimal thickening. An unexpected increase in neointimal response was observed, however, at the stent-to-artery transitions, the so-called "edge effect." To investigate the factors involved in this edge effect, we studied stents with 1 radioactive half and 1 regular nonradioactive half, thereby creating a midstent radioactive dose-falloff zone next to a nonradioactive stent-artery transition at one side and a radioactive stent-artery transition at the other side. METHODS AND RESULTS: Half-radioactive stents (n=20) and nonradioactive control stents (n=10) were implanted in the coronary arteries of Yucatan micropigs. Animals received aspirin and clopidogrel as antithrombotics. After 4 weeks, a significant midstent stenosis was observed by angiography in the half-radioactive stents. Two animals died suddenly because of coronary occlusion at this mid zone at 8 and 10 weeks. At 12-week follow-up angiography, intravascular ultrasound and histomorphometry showed a significant neointimal thickening at the midstent dose-falloff zone of the half-radioactive stents, but not at the stent-to-artery transitions at both extremities. Such a midstent response (mean angiographic late loss 1.0 mm) was not observed in the nonradioactive stents (mean loss 0.4 to 0.6 mm; P< 0.01). CONCLUSIONS: The edge effect of high-dose radioactive stents in porcine coronary arteries is associated with the combination of stent injury and radioactive dose falloff.