Synthesis of Ammonium-Based ILs with Different Lengths of Aliphatic Chains and Organic Halogen-Free Anions as Corrosion Inhibitors of API X52 Steel.

In the present work, synthesis and characterization of 15 ionic liquids (ILs) derived from quaternary ammonium and carboxylates were carried out in order to proceed to their evaluation as corrosion inhibitors (CIs) of API X52 steel in 0.5 M HCl. Potentiodynamic tests confirmed the inhibition efficiency (IE) as a function of the chemical configuration of the anion and cation. It was observed that the presence of two carboxylic groups in long linear aliphatic chains reduced the IE, whereas in shorter chains it was increased. Tafel-polarization results revealed the ILs as mixed-type CIs and that the IE was directly proportional to the CI concentration. The compounds with the best IE were 2-amine-benzoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AA]), 3-carboxybut-3-enoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AI]), and dodecanoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AD]) within the 56-84% interval. Furthermore, it was found that the ILs obeyed the Langmuir adsorption isotherm model and inhibited the corrosion of steel through a physicochemical process. Finally, the surface analysis by scanning electron microscopy (SEM) confirmed less steel damage in the presence of CI due to the inhibitor-metal interaction.

Temperature Effect on the Corrosion Inhibition of Carbon Steel by Polymeric Ionic Liquids in Acid Medium.

In the present research work, the temperature effect on the corrosion inhibition process of API 5L X60 steel in 1 M H2SO4 by employing three vinylimidazolium poly(ionic liquid)s (PILs) was studied by means of electrochemical techniques, surface analysis and computational simulation. The results revealed that the maximal inhibition efficiency (75%) was achieved by Poly[VIMC4][Im] at 308 K and 175 ppm. The PILs showed Ecorr displacements with respect to the blank from -14 mV to -31 mV, which revealed the behavior of mixed-type corrosion inhibitors (CIs). The steel micrographs, in the presence and absence of PILs, showed less surface damage in the presence of PILs, thus confirming their inhibiting effect. The computational studies of the molecular orbitals and molecular electrostatic potential of the monomers suggested that the formation of a protecting film could be mainly due to the nitrogen and oxygen heteroatoms present in each structure.

Investigation of Sulfonium-Iodide-Based Ionic Liquids to Inhibit Corrosion of API 5L X52 Steel in Different Flow Regimes in Acid Medium.

The present work deals with the corrosion inhibition mechanism of API 5L X52 steel in 1 M H2SO4 employing the ionic liquid (IL) decyl(dimethyl)sulfonium iodide [DDMS+I-]. Such a mechanism was elicited by the polarization resistance (R p), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) techniques, both in stationary and dynamic states. The electrochemical results indicated that the corrosion inhibition was controlled by a charge transfer process and that the IL behaved as a mixed-type corrosion inhibitor (CI) with anodic preference. The experimental results revealed maximal inhibition efficiency (IE) rates up to 93% at 150 ppm in the stationary state, whereas in turbulent flow, the IE fell to 65% due to the formation of microvortexes that promoted higher desorption of IL molecules from the surface. The Gibbs free energy of adsorption (ΔG°ads) value of -34.89 kJ mol-1, obtained through the Langmuir isotherm, indicated the formation of an IL monolayer on the metal surface by combining physisorption and chemisorption. The surface analysis techniques confirmed the presence of Fe x O y , FeOOH, and IL on the surface and showed that corrosion damage diminished in the presence of IL. Furthermore, the quantum chemistry calculations (DFT) indicated that the iodide anion hosted most of the highest occupied molecular orbital (HOMO), which eased its adsorption on the anodic sites, preventing the deposition of sulfate ions on the electrode surface.

Inhibition Mechanism of Some Vinylalkylimidazolium-Based Polymeric Ionic Liquids against Acid Corrosion of API 5L X60 Steel: Electrochemical and Surface Studies.

A corrosion inhibition mechanism of API 5L X60 steel exposed to 1.0 M H2SO4 was proposed from the evaluation of three vinylalkylimidazolium poly(ionic liquids) (PILs), employing electrochemical and surface analysis techniques. The synthesized PILs were classified as mixed-type inhibitors whose surface adsorption was promoted mainly by bromide and imidazolate ions, which along with vinylimidazolium cations exerted a resistive effect driven by a charge transfer process by means of a protective PIL film with maximal efficiency of 85% at 175 ppm; the steel surface displayed less surface damage due to the formation of metal-PIL complex compounds.

Synthesis of water-soluble ionic terpolymers by inverse microemulsion and solution polymerization methods.

The synthesis of terpolymers can lead to very interesting combinations of monomers, which can affect the solubility of the polymer, its thermal stability or resistance in saline aqueous media. Free-radical inverse microemulsion and solution polymerization techniques were used to prepare water-soluble acrylamide-N-vinylpyrrolidone-(vinylbenzyl)trimethylammonium chloride terpolymers. The formulation of the polymerizable microemulsion was optimized by using the screening of surfactant percentage and HLB concept. The influence of synthesis temperature on the terpolymer composition and molecular weight was investigated. The reactions were carried out at 60, 70, and 75 °C for the microemulsion technique and at 40, 50, and 55 °C for the solution polymerization technique. The reaction products from both processes were water-soluble polymers, and the two techniques reached high conversions and molecular masses. Maximal molecular weights were displayed by terpolymers prepared by the solution method at 40 °C (959, 840 g mol-1) and the inverse microemulsion method at 60 °C (795, 994 g mol-1). According to NMR analysis, the highest amount of (vinylbenzyl) trimethylammonium chloride was incorporated into the terpolymer structure by the inverse microemulsion method. In contrast, the solution method yielded higher contents of acrylamide and N-vinylpyrrolidone. The viscosity properties of the terpolymers in aqueous solutions were directly correlated to their molecular weight and synthesis conditions.

Synthesis of Ammonium-Based Ionic Liquids for the Extraction Process of a Natural Pigment (Betanin).

The use of new synthesized ammonium-based ionic liquids was explored as an alternative to the current process implemented in the betanin extraction from red beet juice, resulting in high yields: 70% and 82%. Betanin is a vegetal pigment that has been applied to a large variety of products in the food industry, which is important, for it can work as a substitute for the red synthetic dyes used nowadays. Additionally, the use of the kosmotropic salt sodium acetate was explored in order to separate the complex formed by the ionic liquid and pigment of interest in a process that combined two techniques: ATPS (aqueous two-phase system) and SOES (salting-out extraction system). The results reveal that the studied techniques could work as a novel process for the extraction of betanin from red beet juice employing ionic liquids, which have not been tested for this purpose in other research.

Study of Surface Wettability Change of Unconsolidated Sand Using Diffuse Reflectance Infrared Fourier Transform Spectroscopy and Thermogravimetric Analysis.

The effects exerted by the adsorption of vapors of a non-polar compound (deuterated benzene) and a polar compound (water) on the surface of Ottawa sand and a sample of reservoir sand (Channel), which was previously impregnated with silicon oil or two kinds of surfactants, (2-hydroxyethyl) trimethylammonium oleate (HETAO) and (2-hydroxyethyl)trimethylammonium azelate (HETAA), were studied by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and thermogravimetric analysis (TGA). The surface chemistry of the sandstone rocks was elucidated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX). Terminal surface groups such as hydroxyls can strongly adsorb molecules that interact with these surface groups (surfactants), resulting in a wettability change. The wettability change effect suffered by the surface after treating it with surfactants was possible to be detected by the DRIFTS technique, wherein it was observed that the surface became more hydrophobic after being treated with silicon oil and HETAO; the surface became more hydrophilic after treating it with HETAA.

New Synthesis, Structure and Analgesic Properties of Methyl 1-R-4-Methyl-2,2-Dioxo-1H-2λ6,1-Benzothiazine-3-Carboxylates.

According to the principles of the methodology of bioisosteric replacements a series of methyl 1-R-4-methyl-2,2-dioxo-1H-2λ6,1-benzothiazine-3-carboxylates has been obtained as potential analgesics. In addition, a fundamentally new strategy for the synthesis of compounds of this chemical class involving the introduction of N-alkyl substituent at the final stage in 2,1-benzothiazine nucleus already formed has been proposed. Using nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry and X-ray diffraction analysis it has been proven that in the DMSO/K2CO3 system the reaction of methyl 4-methyl-2,2-dioxo-1H-2λ6,1-benzothiazine-3-carboxylate and alkyl halides leads to formation of N-substituted derivatives with good yields regardless of the structure of the alkylating agent. The peculiarities of NMR (¹Ð and 13С) spectra of the compounds synthesized, their mass spectrometric behavior and the spatial structure are discussed. In N-benzyl derivative the ability to form a monosolvate with methanol has been found. According to the results of the pharmacological testing conducted on the model of the thermal tail-flick it has been determined that replacement of 4-ОН-group in methyl 1-R-4-hydroxy-2,2-dioxo-1H-2λ6,1-benzothiazine-3-carboxylates for the methyl group is actually bioisosteric since all methyl 1-R-4-methyl-2,2-dioxo-1H-2λ6,1-benzothiazine-3-carboxylates synthesized demonstrated a statistically significant analgesic effect. The majority of the substances can inhibit the thermal pain response much more effective than piroxicam in the same dose. Under the same conditions as an analgesic the N-methyl-substituted analog exceeds not only piroxicam, but more active meloxicam as well. Therefore, it deserves in-depth biological studies on other experimental models.

The Inhibition of Aluminum Corrosion in Sulfuric Acid by Poly(1-vinyl-3-alkyl-imidazolium Hexafluorophosphate).

Compounds of poly(ionic liquid)s (PILs), derived from imidazole with different alkylic chain lengths located in the third position of the imidazolium ring (poly(1-vinyl-3-dodecyl-imidazolium) (PImC12), poly(1-vinyl-3-octylimidazolium) (PImC8) and poly(1-vinyl-3-butylimidazolium) (PImC4) hexafluorophosphate) were synthesized. These compounds were tested as corrosion inhibitors on aluminum alloy AA6061 in diluted sulfuric acid (0.1-1 M H2SO4) by weight loss tests, polarization resistance measurements and inductively coupled plasma optical emission spectroscopy. Langmuir's isotherms suggested film formation on bare alloy while standard free energy indicated inhibition by a physisorption process. However, compound efficiencies as inhibitors ranked low (PImC12 > PImC8 > PImC4) to reach 61% for PImC12 in highly diluted acidic solution. Apparently, the high mobility of sulfates favored their adsorption in comparison to PILs. The surface film displayed general corrosion, and pitting occurred as a consequence of PILs' partial inhibition along with a continuous dissolution of defective patchy film on formation. A slight improvement in efficiency was displayed by compounds having high molecular weight and a long alkyl chain, as a consequence of steric hindrance and PIL interactions.

Anticancer activity and anti-inflammatory studies of 5-aryl-1,4-benzodiazepine derivatives.

A series of 5-aryl-1,4-benzodiazepines with chloro- or fluoro-substituents in the second ring have been synthesized and their anti-inflammatory, myeloperoxidase and anticancer properties studied. The synthesized compounds showed potential anti-inflammatory and anticancer activities, which were enhanced in the presence of a chloro-substituent in the second ring of the 5-aryl-1,4- benzodiazepine.

Synthesis of 5-aryl-1,4-benzodiazepine derivatives attached in resorcinaren-PAMAM dendrimers and their anti-cancer activity.

A series of resorcinaren-PAMAM dendrimers with benzodiazepines in the periphery were synthesized and their anticancer properties studied. The synthesized dendrimers showed potential anticancer activities, which were enhanced in the presence of a chloro-substituent in the second ring of the 5-aryl-1,4-benzodiazepine. The dendrimers were characterized by IR, (1)H and (13)C NMR, UV-vis absorption, electrospray (ES) and/or MALDI-TOF mass spectrometries.

Synthesis of porphyrin-dendrimers with a pyrene in the periphery and their cubic nonlinear optical properties.

Dendrons of pyrene derivatives were attached to a porphyrin core. A marked effect in solution for the dendrimers was observed in the absorption spectra. All the compounds obtained were characterized by (1)H-, (13)C-NMR, FTIR, UV-vis, MALDI-TOF or FAB+ mass spectrometry and elemental analysis. The cubic nonlinear optical behavior of some the synthesized compounds was tested via Z-Scan measurements in spin-coated film samples.

Dendrimers containing ferrocene and porphyrin moieties: synthesis and cubic non-linear optical behavior.

Dendrons with ferrocenyl ended groups joined by styryl moieties were attached to a porphyrin core. All the dendrons used for dendrimer synthesis showed trans configuration. The chemical structure of the first generation dendron was confirmed by X-ray crystallographic studies. The structure of the synthesized dendrimers was confirmed by 1H- and 13C-NMR, electrospray mass spectrometry and elemental analysis. Cubic non-linear optical behavior of the ferrocene and porphyrin-containing dendrimers was studied in solid thin films by THG Maker-Fringe technique at 1,260 nm.