Neurosensory and vascular symptoms and clinical findings in the hands of Arctic open-pit miners in Sweden and Norway - a descriptive study.

This cross-sectional study aimed to describe exposure to cold climate and hand-arm vibration (HAV) as well as neurosensory and vascular symptoms and clinical findings among open-pit Arctic miners. It was based on data from questionnaires and physical examinations, including 177 men and 75 women from two open-pit mines in Sweden and Norway (response rate 54%). Working outdoors or in an unheated building or machine for at least two hours per day was reported by 44% and HAV exposure of the same duration by 10%. Neurosensory symptoms (e.g. reduced perception of touch) in the hands were reported by 47% and Raynaud's phenomenon by 14%. In brief conclusion, the study showed that Arctic miners were commonly exposed to both cold temperatures and HAV. They also reported a broad range of neurosensory and vascular symptoms in their hands and had abnormal clinical findings related to the symptoms. The results emphasise the need for additional preventive measures in this occupational setting.

Stress and Sleep in Relation to Severity of Building Related Symptoms.

OBJECTIVE: This study investigates different aspects of stress and sleep in medically examined individuals with varying severity of building-related symptoms (BRS). METHODS: Three questionnaires were used to assess acute and long-term stress and sleep (Perceived Stress Scale; Shirom Melamed Burnout Questionnaire, and Karolinska Sleep Questionnaire). RESULTS: Individuals with BRS, regardless of severity, did not differ in level of perceived stress (indicator of short-term stress). The indicators of long-term stress differed between the groups where an increased severity was associated with higher levels of burnout and sleep problems. CONCLUSIONS: The study suggests an association between symptom severity and measures of long-term stress and sleep quality. This has implications for the treatment of persons affected by BRS, because not only the environment needs to be treated, but also the concurrent signs of distress, such as burnout or sleep problems.

Incidence, remission, and persistence of Raynaud's phenomenon in the general population of northern Sweden: a prospective study.

BACKGROUND: Raynaud's phenomenon is common condition, but little is known about the natural course. The primary aim of this study was to determine the incidence, remission, and persistence proportions of Raynaud's phenomenon in the general population of northern Sweden. Secondary aims were to determine how individual and exposure factors affect the course of Raynaud's phenomenon, and to assess gender differences. METHODS: A prospective, survey-based, closed-cohort study was conducted on a sample of men and women between 18-70 years of age, living in northern Sweden. Data on Raynaud's phenomenon characteristics and general health status were collected during the winters of 2015 (baseline) and 2021 (follow-up). Rates of incidence, remission, and persistence were calculated. Binary logistic regression was used to determine the association between baseline variables and the course of Raynaud's phenomenon. RESULTS: The study population consisted of 2703 women (53.9%) and 2314 men. There were 390 women (14.5%) and 290 men (12.7%) reporting Raynaud's phenomenon in the follow-up survey. The annual incidence proportion was 0.7% among women and 0.9% among men (gender difference p = 0.04). The annual remission proportion was 4.4% and 5.5%, respectively (p = 0.05). Having sustained a cold injury affecting the hands since baseline was significantly associated with incident Raynaud's phenomenon (OR 3.92; 95% CI 2.60-5.90), after adjusting for age and gender. CONCLUSIONS: In the general population of northern Sweden, Raynaud's phenomenon is a common but variable condition, where symptoms may remit over time. Men had a higher incidence proportion than women. The results support a possible causal pathway where cold injury can precede the onset of Raynaud's phenomenon.

Occupational cold exposure in relation to incident airway symptoms in northern Sweden: a prospective population-based study.

OBJECTIVE: To determine if occupational exposure to cold environments is associated with incident airway symptoms in previously healthy workers. METHODS: A prospective, survey-based, closed-cohort study was conducted on a sample of 5017 men and women between 18 and 70 years of age, living in northern Sweden. Data on occupation, occupational and leisure-time cold exposure, airway symptoms, general health, and tobacco habits were collected during the winters of 2015 (baseline) and 2021 (follow-up). Stepwise multiple logistic regression was used to determine associations between baseline variables and incident airway symptoms. RESULTS: For individuals working at baseline, without physician-diagnosed asthma or chronic obstructive pulmonary disease, reporting any occupational cold exposure was associated with incident wheeze (OR 1.41; 95% CI 1.06-1.87) and incident productive cough (OR 1.37; 95% CI 1.06-1.77), but not incident long-standing cough (OR 0.98; 95% CI 0.74-1.29), after adjusting for age, body mass index, daily smoking, and occupational physical workload. Detailed analysis of the occupational cold exposure rating did not reveal clear exposure-response patterns for any of the outcomes. CONCLUSIONS: Occupational cold exposure was robustly associated with incident wheeze and productive cough in previously healthy workers. This adds further support to the notion that cold air is harmful for the airways, and that a structured risk assessment regarding occupational cold exposure could be considered for inclusion in the Swedish workplace legislation. Further studies are needed to elaborate on exposure-response functions, as well as suggest thresholds for hazardous cold exposure.

Symptoms and oxylipins in plasma before and after exposure to rooms in which individuals have both experienced and not experienced building-related symptoms - an exploratory study.

The aim of this study was to investigate if there are differences in symptom ratings and plasma concentrations of oxylipins as a measure of acute inflammation between individuals with building-related symptoms (BRS) and referents during exposure to rooms where people experienced BRS and rooms where they did not experience BRS. Medically examined individuals with BRS and healthy, age and sex matched referents working in the same building were exposed for 60 min. Ratings of symptoms and collection of blood to measure oxylipins in plasma were performed before and after each exposure. Individuals with BRS reported more symptoms (mostly mucosal) than the referents in the problem rooms and there was a tendency towards a difference between the groups in concentration of metabolites from the cyclooxygenase pathway (COX). The mean reported intensity of symptoms among all participants was also found to be positively correlated with both COX and lipoxygenase (LOX-15) oxylipins in problem rooms.

Personal exposure levels to O3, NOx and PM10 and the association to ambient levels in two Swedish cities.

Exposure to air pollution is of great concern for public health although studies on the associations between exposure estimates and personal exposure are limited and somewhat inconsistent. The aim of this study was to quantify the associations between personal nitrogen oxides (NOx), ozone (O3) and particulate matter (PM10) exposure levels and ambient levels, and the impact of climate and time spent outdoors in two cities in Sweden. Subjects (n = 65) from two Swedish cities participated in the study. The study protocol included personal exposure measurements at three occasions, or waves. Personal exposure measurements were performed for NOx and O3 for 24 h and PM10 for 24 h, and the participants kept an activity diary. Stationary monitoring stations provided hourly data of NOx, O3 and PM, as well as data on air temperature and relative humidity. Data were analysed using mixed linear models with the subject-id as a random effect and stationary exposure and covariates as fixed effects. Personal exposure levels of NOx, O3 and PM10 were significantly associated with levels measured at air pollution monitoring stations. The associations persisted after adjusting for temperature, relative humidity, city and wave, but the modelled estimates were slightly attenuated from 2.4% (95% CI 1.8-2.9) to 2.0% (0.97-2.94%) for NOx, from 3.7% (95% CI 3.1-4.4) to 2.1% (95% CI 1.1-2.9%) for O3 and from 2.6% (95% 0.9-4.2%) to 1.3% (95% CI - 1.5-4.0) for PM10. After adding covariates, the degree of explanation offered by the model (coefficient of determination, or R2) did not change for NOx (0.64 to 0.63) but increased from 0.46 to 0.63 for O3, and from 0.38 to 0.43 for PM10. Personal exposure to NOx, O3 and PM has moderate to good association with levels measured at urban background sites. The results indicate that stationary measurements are valid as measure of exposure in environmental health risk assessments, especially if they can be refined using activity diaries and meteorological data. Approximately 50-70% of the variation of the personal exposure was explained by the stationary measurement, implying occurrence of misclassification in studies using more crude exposure metrics, potentially leading to underestimates of the effects of exposure to ambient air pollution.

Occupational cold exposure is associated with increased reporting of airway symptoms.

OBJECTIVE: To determine if exposure to cold environments, during work or leisure time, was associated with increased reporting of airway symptoms in the general population of northern Sweden. METHODS: Through a population-based postal survey responded to by 12627 subjects, ages 18-70, living in northern Sweden, the occurrence of airway symptoms was investigated. Cold exposure during work or leisure time was self-reported on numerical rating scales. Binary logistic regression was used to determine the statistical association between cold exposure and airway symptoms. RESULTS: For currently working subjects (N = 8740), reporting any occupational cold exposure was associated to wheeze (OR 1.3; 95% CI 1.1-1.4); chronic cough (OR 1.2; 95% CI 1.1-1.4); and productive cough (OR 1.3; 95% CI 1.1-1.4), after adjusting for gender, age, body mass index, daily smoking, asthma, and chronic obstructive pulmonary disease. Leisure-time cold exposure was not significantly associated to reporting airway symptoms. CONCLUSIONS: Occupational cold exposure was an independent predictor of airway symptoms in northern Sweden. Therefore, a structured risk assessment regarding cold exposure could be considered for inclusion in the Swedish workplace legislation.

Defining abnormal cold sensitivity using the Cold Intolerance Symptom Severity questionnaire: a population study.

Cold sensitivity, a common and disabling sequela of hand injury, can be assessed using the Cold Intolerance Symptom Severity (CISS) questionnaire, rating symptoms on a scale from 4 to 100. The primary objective of this study was to define a clinical cut-off for abnormal cold sensitivity based on the CISS score in a healthy working-age population. The secondary objective was to investigate how age, gender and previous injuries and diseases influence CISS scoring. In this study, 1239 out of 1582 selected healthy subjects of working age living in northern Sweden completed the questionnaire, yielding a response rate of 78%. The 95th percentile for the CISS score was 49.5 for men and 53.0 for women. The effects of age, gender and previous injuries and diseases were minor and not considered clinically relevant. The results support that a CISS score above 50 should be considered as abnormal cold sensitivity.Level of evidence: III.

Development and evaluation of a questionnaire instrument for chemical intolerance, based on the International Classification of Functioning, Disability and Health.

PURPOSE: The purpose was to develop a questionnaire instrument to measure difficulties in activities and participation, and impact of environmental factors in chemical intolerance, based on the International Classification of Functioning, Disability and Health, and to assess its validity and reliability. METHOD: Development in three steps: (1) choosing items of relevance for chemical intolerance with an expert group, (2) conducting interviews with persons with chemical intolerance, using sampling to redundancy, (3) conducting a survey with 112 respondents at a first assessment and 91 at a second assessment for test-retest. RESULTS: The final version of the instrument consists of 57 items divided in three parts, which showed good internal consistency in each part, Cronbach alpha: 0.73-0.87. It had good content validity, readability and face validity. Test-retest showed good to very good (≥0.61) Kappa agreement for 37 items, and moderate (0.41-0.60) for 17 items. Three items had poor or fair (<0.41) Kappa agreement. CONCLUSION: The instrument was found to be valid and reliable. It can be used as a clinical tool to help persons with chemical intolerance to receive the best suited help and support for each individual, identify key points in rehabilitation, measure rehabilitation outcome and establish priority for treatment.IMPLICATIONS FOR REHABILITATIONThe questionnaire instrument based on the International Classification of Functioning, Disability and Health which was developed and evaluated in this study, can be used to measure difficulties in activities and participation, and impact of environmental factors in chemical intolerance.Persons with chemical intolerance report lack of support from healthcare and society. Using this questionnaire instrument can help forming the best suited help and support for each individual based on his/her preconditions.This questionnaire instrument can be used to identify key points in rehabilitation and measure rehabilitation outcome.

Manifestations of cold sensitivity - a case series.

Objectives: To characterise cold sensitivity using a semi-structured interview, physical examination, thermal quantitative sensory testing (QST), and laser speckle contrast analysis (LASCA). Methods: Eight women and four men, ages 22-74, with cold sensitivity were interviewed and examined by an occupational physician. Thermal perception thresholds were established using QST, on the pulp of the index and little finger of the most affected hand. Skin perfusion in the dorsum of the hand was measured using LASCA, at baseline, after two-minute 12°C water immersion, and during rewarming. Results: The physical examination yielded few findings indicative of vascular or neurosensory pathology. One subject (8%) had impaired thermal perception thresholds. LASCA at baseline showed absent proximal-distal perfusion gradients in six subjects (50%), and a dyshomogeneous perfusion pattern in five (42%). Perfusion on a group level was virtually unchanged by cold stress testing (median 52.5 PU; IQR 9.0 before versus 51.3 PU; IQR 27.2 afterwards). Conclusions: Physical examination and thermal QST offered little aid in diagnosing cold sensitivity, which challenges the neurosensory pathophysiological hypothesis. LASCA indicated disturbances in microvascular regulation and could prove a useful tool in future studies on cold sensitivity.

Differences in chemical composition of indoor air in rooms associated/not associated with building related symptoms.

Building related health effects or symptoms (BRS), known also as sick-building syndrome (SBS), are a phenomenon that is not well understood. In this study, air samples from 51 rooms associated with BRS and 34 control rooms were collected on multi-sorbent tubes and analyzed by a non-target approach using comprehensive two-dimensional gas chromatography and high-resolution mass spectrometry techniques. The large amount of data gathered was analyzed using multivariate statistics (principle component analysis (PCA) and partial least squares (PLS)). This new analysis approach revealed that in rooms where people experienced BRS, petrochemicals and chemicals emitted from plastics were abundant, whereas in rooms where people did not experience BRS, flavor and fragrance compounds were abundant. Among the petrochemicals benzene and 2-butoxyethanol were found in higher levels in rooms where people experienced BRS. The levels of limonene were sometimes in the range of reported odor thresholds, and similarly 3-carene and beta-myrcene were found in higher concentrations in indoor air of rooms where people did not experience BRS. It cannot be ruled out that these compounds may have influenced the perceived air quality. However, the overall variability in air concentrations was large and it was not possible to accurately predict if the air in a particular room could cause BRS or not.

Passive personal air sampling of dust in a working environment-A pilot study.

The aim of this study was to make a preliminary evaluation of the University of North Carolina passive aerosol sampler (UNC sampler) for personal air sampling of particles. Nine personal air samplings of respirable fraction were conducted in an open-pit mine, with pairwise UNC samplers and a respirable cyclone mounted on the chest of workers. UNC samples were analyzed with scanning electron microscopy (SEM) and to some extent energy dispersive X-ray spectroscopy (EDS). Respirable cyclone filter samples were weighed. Correlations and particle elemental compositions were described. Microscopic imaging of the collection surface showed that the particles were heterogeneously deposited across the surface of the UNC sampler. Collected particles were shaped as gravel particles and the resulting particle size distribution in air showed a peak at ca. 3 µm aerodynamic diameter, similarly to what has previously been reported from the same mine. The elemental composition indicated mineral origin. All correlations between the airborne mass concentrations from UNC samplers and respirable cyclones (Pearson = 0.54 and Spearman = 0.43) and between pairs of parallel UNC samplers (Pearson = 0.55 and Spearman = 0.67) were weak. The UNC sampler mass concentrations were approximately 30 times higher than those measured with the respirable cyclone. In conclusion, the UNC sampler, when used for personal sampling in a mine, provides a reasonable particle size distribution and the deposited particles appeared to be of mineral origin and not from textile or skin but the approximately 30-fold overestimation of mass concentrations when comparing with respirable cyclone sampling indicates that further improvements are necessary. Positioning of the sampler may be critical and moving the UNC sampler from the chest to e.g. the top of a helmet might be an improvement. Grounding of the sampler in order to avoid static electricity might also be useful. The UNC sampler should continue to be researched for personal sampling, as passive sampling might become a useful alternative to more laborious sampling techniques.

Benzene Exposure and Biomarkers in Alveolar Air and Urine Among Deck Crews on Tankers Transporting Gasoline.

INTRODUCTION: Increased rates of leukaemia have been found among tanker crews. Occupational exposures to the leukomogen benzene during loading, unloading, and tank cleaning are possible causes. Studies on older types of tankers carrying gasoline with most handling being done manually have revealed important exposures to benzene. Our study explores benzene exposures on tankers with both automatic and manual systems. Correlations between benzene exposure and benzene in alveolar air (AlvBe), benzene in urine (UBe), and trans,trans-muconic acid (ttMA) in urine were investigated. METHODS: Forty-three male seafarers (22 deck crewmembers and 21 not on deck) on five Swedish different product and chemical tankers transporting 95- or 98-octane gasoline were investigated between 1995 and 1998. The tankers used closed systems for the loading and unloading of gasoline but stripping and tank cleaning were done manually. Benzene in respiratory air was measured using personal passive dosimeters during a 4-h work shift. Samples for biomarker analyses were collected pre- and post-shift. Smoking did occur and crewmembers did not use any respiratory protection during work. RESULTS: The average 4-h benzene exposure level for exposed was 0.45 mg m-3 and for non-exposed 0.02 mg m-3. Benzene exposure varied with type of work (range 0.02-143 mg m-3). AlvBe, UBe, and ttMA were significantly higher in post-shift samples among exposed and correlated with exposure level (r = 0.89, 0.74, and 0.57, respectively). Smoking did not change the level of significance among exposed. DISCUSSION: Benzene in alveolar air, unmetabolized benzene, and ttMA in urine are potential biomarkers for occupational benzene exposure. Biomarkers were detectable in non-exposed, suggesting benzene exposure even for other work categories on board tankers. Work on tankers carrying gasoline with more or less closed handling of the cargo may still lead to significant benzene exposure for deck crewmembers, and even exceed the Swedish Occupational Exposure Limit (OEL; 8-h time-weighted average [TWA]) of 1.5 mg m-3.

Raynaud's phenomenon in Northern Sweden: a population-based nested case-control study.

The aim of this study was to determine the association between individual and external exposure factors, and the reporting of Raynaud's phenomenon, with or without concomitant cold sensitivity. In a population-based nested case-control study, cases with Raynaud's phenomenon (N = 578), and matched controls (N = 1156), were asked to respond to a questionnaire focusing on different risk factors. Univariate and multiple conditional logistic regression were performed. Analyses were stratified according to whether the cases reported cold sensitivity or not. In total, 1400 out of 1734 study subjects answered the questionnaire (response rate 80.7%). In the final multiple model, the factor with the strongest association to Raynaud's phenomenon, with and without cold sensitivity, was previous frostbite affecting the hands (OR 12.44; 95% CI 5.84-26.52 and OR 4.01; 95% CI 1.78-9.01, respectively). Upper extremity nerve injury was associated to reporting Raynaud's phenomenon and cold sensitivity (OR 2.23; 95% CI 1.29-3.85), but not Raynaud's phenomenon alone. Reporting any exposure to hand-arm vibration or cumulative cold exposure was significant in univariate analyses for cases with both Raynaud's phenomenon and cold sensitivity, but not in the multiple model. Raynaud's phenomenon is strongly associated to previous cold injury, with a larger effect size among those who also report cold sensitivity. The fact that only upper extremity nerve injury differed significantly between case groups in our multiple model offers additional support to the neural basis for cold sensitivity.

Cold sensitivity and associated factors: a nested case-control study performed in Northern Sweden.

PURPOSE: To identify factors associated with the reporting of cold sensitivity, by comparing cases to controls with regard to anthropometry, previous illnesses and injuries, as well as external exposures such as hand-arm vibration (HAV) and ambient cold. METHODS: Through a questionnaire responded to by the general population, ages 18-70, living in Northern Sweden (N = 12,627), cold sensitivity cases (N = 502) and matched controls (N = 1004) were identified, and asked to respond to a second questionnaire focusing on different aspects of cold sensitivity as well as individual and external exposure factors suggested to be related to the condition. Conditional logistic regression analyses were performed to determine statistical significance. RESULTS: In total, 997 out of 1506 study subjects answered the second questionnaire, yielding a response rate of 81.7%. In the multiple conditional logistic regression model, identified associated factors among cold sensitive cases were: frostbite affecting the hands (OR 10.3, 95% CI 5.5-19.3); rheumatic disease (OR 3.1, 95% CI 1.7-5.7); upper extremity nerve injury (OR 2.0, 95% CI 1.3-3.0); migraines (OR 2.4, 95% CI 1.3-4.3); and vascular disease (OR 1.9, 95% CI 1.2-2.9). A body mass index ≥ 25 was inversely related to reporting of cold sensitivity (0.4, 95% CI 0.3-0.6). CONCLUSIONS: Cold sensitivity was associated with both individual and external exposure factors. Being overweight was associated with a lower occurrence of cold sensitivity; and among the acquired conditions, both cold injuries, rheumatic diseases, nerve injuries, migraines and vascular diseases were associated with the reporting of cold sensitivity.

Assessment of dermal uptake of diphenylmethane-4,4'-diisocyanate using tape stripping and biological monitoring.

Very little is known about the dermal uptake of isocyanates, and dermal exposure to isocyanates has been discussed as a factor involved in the induction of respiratory diseases. To investigate the dermal uptake of diphenylmethane-4,4'-diisocyanate (4,4'-MDI). Four volunteers were dermally exposed to 10, 25, 49 and 50 mg 4,4'-MDI, respectively, for eight hours. The exposed areas were tape stripped. Urine and blood were biologically monitored for 48 hours. Tape strips, plasma, and urine were analysed by liquid chromatography-mass spectrometry. In total, 35-70% of the applied dose of 4,4'-MDI was absorbed by the skin. Very low fractions of applied dose were found in the tape strips. The 4,4'-MDA concentration in plasma and urine was low, but peaked in urine at 10-14 hours and plasma at 8-32 hours after exposure. 4,4'-MDI is readily absorbed by human skin. Only small fractions of 4,4'-MDI remain as such in the superficial skin layers. The amounts found in blood and urine were only small fractions of the total applied doses which indicates that very small amounts of 4,4'-MDI penetrate the skin and reach the blood stream. The dermal uptake and distribution of 4,4'-MDI is much slower compared to that associated with airway uptake. Our data strongly indicate that formation of 4,4'-MDA from 4,4'-MDI upon reacting with water in the skin can only occur to a very limited extent.

Improving the UNC Passive Aerosol Sampler Model Based on Comparison with Commonly Used Aerosol Sampling Methods.

Objectives: In an occupational environment, passive sampling could be an alternative to active sampling with pumps for sampling of dust. One passive sampler is the University of North Carolina passive aerosol sampler (UNC sampler). It is often analysed by microscopic imaging. Promising results have been shown for particles above 2.5 µm, but indicate large underestimations for PM2.5. The aim of this study was to evaluate, and possibly improve, the UNC sampler for stationary sampling in a working environment. Methods: Sampling was carried out at 8-h intervals during 24 h in four locations in an open pit mine with UNC samplers, respirable cyclones, PM10 and PM2.5 impactors, and an aerodynamic particle sizer (APS). The wind was minimal. For quantification, two modifications of the UNC sampler analysis model, UNC sampler with hybrid model and UNC sampler with area factor, were compared with the original one, UNC sampler with mesh factor derived from wind tunnel experiments. The effect of increased resolution for the microscopic imaging was examined. Results: Use of the area factor and a higher resolution eliminated the underestimation for PM10 and PM2.5. The model with area factor had the overall lowest deviation versus the impactor and the cyclone. The intraclass correlation (ICC) showed that the UNC sampler had a higher precision and better ability to distinguish between different exposure levels compared to the cyclone (ICC: 0.51 versus 0.24), but lower precision compared to the impactor (PM10: 0.79 versus 0.99; PM2.5: 0.30 versus 0.45). The particle size distributions as calculated from the different UNC sampler analysis models were visually compared with the distributions determined by APS. The distributions were obviously different when the UNC sampler with mesh factor was used but came to a reasonable agreement when the area factor was used. Conclusions: High resolution combined with a factor based on area only, results in no underestimation of small particles compared to impactors and cyclones and a better agreement with the APS's particle size distributions. The UNC sampler had lower precision than the impactors, but higher than the respirable cyclone. The UNC sampler with area factor could be used for PM2.5, PM10 and respirable fraction measurements in this working environment without wind.

A Pilot Study: The UNC Passive Aerosol Sampler in a Working Environment.

OBJECTIVES: Dust is generally sampled on a filter using air pumps, but passive sampling could be a cost-effective alternative. One promising passive sampler is the University of North Carolina passive aerosol sampler (UNC sampler). The aim of this study is to characterize and compare the UNC sampler's performance with PM10 and PM2.5 impactors in a working environment. METHODS: Area sampling was carried out at different mining locations using UNC samplers in parallel with PM2.5 and PM10 impactors. Two different collection surfaces, polycarbonate (PC) and carbon tabs (CT), were employed for the UNC sampling. Sampling was carried out for 4-25 hours. RESULTS: The UNC samplers underestimated the concentrations compared to PM10 and PM2.5 impactor data. At the location with the highest aerosol concentration, the time-averaged mean of PC showed 24% and CT 35% of the impactor result for PM2.5. For PM10, it was 39% with PC and 58% with CT. Sample blank values differed between PC and CT. For PM2.5, PC blank values were ~7 times higher than those of CT, but only 1.8 times higher for PM10. The blank variations were larger for PC than for CT. CONCLUSIONS: Particle mass concentrations appear to be underestimated by the UNC sampler compared to impactors, more so for PM2.5 than for PM10. CT may be preferred as a collection surface because the blank values were lower and less variable than for PC. Future validations in the working environment should include respirable dust sampling.

Neurovascular hand symptoms in relation to cold exposure in northern Sweden: a population-based study.

PURPOSE: To describe the self-reported ambient cold exposure in northern Sweden and to relate the level of cumulative cold exposure to the occurrence of sensory and vascular hand symptoms. We hypothesize that cold exposure is positively related to reporting such symptoms. METHODS: A questionnaire about cold exposure and related symptoms was sent out to 35,144 subjects aged 18-70 years and living in northern Sweden. RESULTS: A total of 12,627 out of 35,144 subjects returned the questionnaire (response rate 35.9%). Subjects living in the rural alpine areas reported more extensive cold exposure both during work and leisure time compared to the urbanized coastal regions. Frostbite in the hands was present in 11.4% of men and 7.1% of women, cold sensitivity was present in 9.7 and 14.4%, and Raynaud's phenomenon was present in 11.0% of men and 14.0% of women. There was a positive association between cumulative cold exposure and neurovascular hand symptoms. CONCLUSION: The present study demonstrates that the cold environment in northern Sweden might be an underestimated health risk. Our hypothesis that cold exposure is positively related to reporting of neurovascular hand symptoms was supported by our findings. In addition, such symptoms were common not only in conjunction with an overt cold injury. Our results warrant further study on pathophysiological mechanisms and suggest the need for confirmatory prevalence studies to support national public health planning.

Determinants explaining the variability of hand-transmitted vibration emissions from two different work tasks: grinding and cutting using angle grinders.

BACKGROUND: There are numerous factors including physical, biomechanical, and individual that influence exposure to hand-transmitted vibration (HTV) and cause variability in the exposure measurements. Knowledge of exposure variability and determinants of exposure could be used to improve working conditions. We performed a quasi-experimental study, where operators performed routine work tasks in order to obtain estimates of the variance components and to evaluate the effect of determinants, such as machine-wheel combinations and individual operator characteristics. METHODS: Two pre-defined simulated work tasks were performed by 11 operators: removal of a weld puddle of mild steel and cutting of a square steel pipe. In both tasks, four angle grinders were used, two running on compressed air and two electrically driven. Two brands of both grinding and cutting wheels were used. Each operator performed both tasks twice in a random order with each grinder and wheel and the time to complete each task was recorded. Vibration emission values were collected and the wheel wear was measured as loss of weight. Operators' characteristics collected were as follows: age, body height and weight, length and volume of their hands, maximum hand grip force, and length of work experience with grinding machines (years). The tasks were also performed by one operator who used four machines of the same brand. Mixed and random effects models were used in the statistical evaluation. RESULTS: The statistical evaluation was performed for grinding and cutting separately and we used a measure referring to the sum of the 1-s r.m.s. average frequency-weighted acceleration over time for completing the work task (a(sa)). Within each work task, there was a significant effect as a result of the determinants 'the machine used', 'wheel wear', and 'time taken to complete the task'. For cutting, 'the brand of wheel' used also had a significant effect. More than 90% of the inherent variability in the data was explained by the determinants. The two electrically powered machines had a mean a(sa) that was 2.6 times higher than the two air-driven machines. For cutting, the effect of the brand of wheel on a(sa) was ~0.1 times. The a(sa) increased both with increasing wheel wear and with time taken to complete the work task. However, there were also a number of interaction effects which, to a minor extent, modified the a(sa). Only a minor part (1%) of the total variability was attributed to the operator: for cutting, the volume of the hands, maximum grip force, and body weight were significant, while for grinding, it was the maximum grip force. There was no clear difference in a(sa) between the four copies of the same brand of each machine. CONCLUSIONS: By including determinants that were attributed to the brand of both machine and wheel used as well as the time taken to complete the work task, we were able to explain >90% of the variability. The dominating determinant was the brand of the machine. Little variability was found between operators, indicating that the overall effect as due to the operator was small.