Folding and catalysis of the hairpin ribozyme.

The active form of the hairpin ribozyme is brought about by the interaction of two formally unpaired loops. In a natural molecule, these are present on two adjacent arms of a four-way junction. Although activity can be obtained in molecules lacking this junction, the junction is important in the promotion of the folded state of the ribozyme under physiological conditions, at a rate that is faster than the chemical reaction. Single-molecule fluorescence resonance energy transfer studies show that the junction introduces a discrete intermediate into the folding process, which repeatedly juxtaposes the two loops and thus promotes their docking. Using single-molecule enzymology, the cleavage and ligation rates have been measured directly. The pH dependence of the rates is consistent with a role for nucleobases acting in general acid-base catalysis.

Single-molecule studies of DNA and RNA four-way junctions.

Branched helical junctions are common in nucleic acids. In DNA, the four-way junction (Holliday junction) is an essential intermediate in homologous recombination and is a highly dynamic structure, capable of stacking conformer transitions and branch migration. Our single-molecule fluorescence studies provide unique insight into the energy landscape of Holliday junctions by visualizing these processes directly. In the hairpin ribozyme, an RNA four-way junction is an important structural element that enhances active-site formation by several orders of magnitude. Our single-molecule studies suggest a plausible mechanism for how the junction achieves this remarkable feat; the structural dynamics of the four-way junction bring about frequent contacts between the loops that are needed to form the active site. The most definitive evidence for this is the observation of three-state folding in single-hairpin ribozymes, the intermediate state of which is populated due to the intrinsic properties of the junction.

The structure and active site of the Varkud satellite ribozyme.

The Varkud satellite ribozyme is the largest of the small nucleolytic ribozymes, and the only one for which there is no crystal structure. It can be divided into a trans -acting ribozyme, consisting of five helices organized by two three-way helical junctions, and a stem-loop substrate with which it interacts, primarily by tertiary interactions. We have determined the global fold of the ribozyme, and the manner by which it interacts with the substrate. The substrate interacts with a cleft formed between helices II and VI (organized by the lower helical junction), where it contacts the A730 loop, the probable active site of the ribozyme. Within this loop, there is a critical adenine base (A756) that is a candidate for direct nucleobase participation in the cleavage reaction.

Distortion of DNA junctions imposed by the binding of resolving enzymes: a fluorescence study.

Junction-resolving enzymes are nucleases that are specific for the structure of the four-way DNA junction. The binding of RuvC of Escherichia coli and Hjc of Sulfolobus solfataricus can be followed by an increase in the fluorescence anisotropy of Cy3 terminally attached to one of the helical arms of a four-way junction. By contrast, there was no change in fluorescein anisotropy with the binding of single dimers of these proteins. Fluorescence resonance energy transfer has therefore been used between fluorescein and Cy3 fluorophores attached to the ends of helical arms to analyse the global structure of the junction on protein binding. The results indicate that both enzymes induce a marked change in the global DNA conformation on the binding of a single dimer. The structure of the protein-junction complexes is independent of the presence or absence of divalent metal ions, unlike that of the protein-free junction. The structures of the RuvC and Hjc complexes are different, but both represent a significant opening of the structure compared to the stacked X-structure of the protein-free junction in the presence of magnesium ions. This protein-induced opening is likely to be important in the function of these enzymes.

The A730 loop is an important component of the active site of the VS ribozyme.

The core of the VS ribozyme comprises five helices, that act either in cis or in trans on a stem-loop substrate to catalyse site-specific cleavage. The structure of the 2-3-6 helical junction indicates that a cleft is formed between helices II and VI that is likely to serve as a receptor for the substrate. Detailed analysis of sequence variants suggests that the base bulges of helices II and VI play an architectural role. By contrast, the identity of the nucleotides in the A730 loop is very important for ribozyme activity. The base of A756 is particularly vital, and substitution by any other nucleotide or ablation of the base leads to a major reduction in cleavage rate. However, variants of A756 bind substrate efficiently, and are not defective in global folding. These results suggest that the A730 loop is an important component of the active site of the ribozyme, and that A756 could play a key role in catalysis.

The junction-resolving enzymes.

Junction-resolving enzymes are ubiquitous nucleases that are important for DNA repair and recombination and act on DNA molecules containing branch points, especially four-way junctions. They show a pronounced selectivity for the structure of the DNA substrate but, despite its importance, the structural selectivity is not well understood. This poses an intriguing challenge in molecular recognition on a relatively large scale.

Dissection of the ion-induced folding of the hammerhead ribozyme using 19F NMR.

We have used (19)F NMR to analyze the metal ion-induced folding of the hammerhead ribozyme by selective incorporation of 5fluorouridine. We have studied the chemical shift and linewidths of (19)F resonances of 5-fluorouridine at the 4 and 7 positions in the ribozyme core as a function of added Mg(2+). The data fit well to a simple two-state model whereby the formation of domain 1 is induced by the noncooperative binding of Mg(2+) with an association constant in the range of 100 to 500 M(-1), depending on the concentration of monovalent ions present. The results are in excellent agreement with data reporting on changes in the global shape of the ribozyme. However, the NMR experiments exploit reporters located in the center of the RNA sections undergoing the folding transitions, thereby allowing the assignment of specific nucleotides to the separate stages. The results define the folding pathway at high resolution and provide a time scale for the first transition in the millisecond range.

Importance of specific nucleotides in the folding of the natural form of the hairpin ribozyme.

The hairpin ribozyme in its natural context consists of two loops in RNA duplexes that are connected as arms of a four-way helical junction. Magnesium ions induce folding into the active conformation in which the two loops are in proximity. In this study, we have investigated nucleotides that are important to this folding process. We have analyzed the folding in terms of the cooperativity and apparent affinity for magnesium ions as a function of changes in base sequence and functional groups, using fluorescence resonance energy transfer. Our results suggest that the interaction between the loops is the sum of a number of component interactions. Some sequence variants such as A10U, G+1A, and C25U exhibit loss of cooperativity and reduced affinity of apparent magnesium ion binding. These variants are also very impaired in ribozyme cleavage activity. Nucleotides A10, G+1, and C25 thus appear to be essential in creating the conformational environment necessary for ion binding. The double variant G+1A/C25U exhibits a marked recovery of both folding and catalytic activity compared to either individual variant, consistent with the proposal of a triple-base interaction among A9, G+1, and C25 [Pinard, R., Lambert, D., Walter, N. G., Heckman, J. E., Major, F., and Burke, J. M. (1999) Biochemistry 38, 16035-16039]. However, substitution of A9 leads to relatively small changes in folding properties and cleavage activity, and the double variant G+1DAP/C25U (DAP is 2,6-diaminopurine), which could form an isosteric triple-base interaction, exhibits folding and cleavage activities that are both very impaired compared to those of the natural sequence. Our results indicate an important role for a Watson--Crick base pair between G+1 and C25; this may be buttressed by an interaction with A9, but the loss of this has less significant consequences for folding. 2'-Deoxyribose substitution leads to folding with reduced magnesium ion affinity in the following order: unmodified RNA > dA9 > dA10 > dC25 approximately dA10 plus dC25. The results are interpreted in terms of an interaction between the ribose ring of C25 and the ribose and base of A10, in agreement with the proposal of Ryder and Strobel [Ryder, S. P., and Strobel, S. A. (1999) J. Mol. Biol. 291, 295-311]. In general, there is a correlation between the ability to undergo ion-induced folding and the rate of ribozyme cleavage. An exception to this is provided by G8, for which substitution with uridine leads to severe impairment of cleavage but folding characteristics that are virtually unaltered from those of the natural species. This is consistent with a direct role for the nucleobase of G8 in the chemistry of cleavage.

The active site of the junction-resolving enzyme T7 endonuclease I.

Endonuclease I is a junction-resolving enzyme encoded by bacteriophage T7, that selectively binds and cleaves four-way DNA junctions. We have recently solved the structure of this dimeric enzyme at atomic resolution, and identified the probable catalytic residues. The putative active site comprises the side-chains of three acidic amino acids (Glu20, Asp55 and Glu65) together with a lysine residue (Lys67), and shares strong similarities with a number of type II restriction enzymes. However, it differs from a typical restriction enzyme as the proposed catalytic residues in both active sites are contributed by both polypeptides of the dimer. Mutagenesis experiments confirm the importance of all the proposed active site residues. We have carried out in vitro complementation experiments using heterodimers formed from mutants in different active site residues, showing that Glu20 is located on a different monomer from the remaining amino acid residues comprising the active site. These experiments confirm that the helix-exchanged architecture of the enzyme creates a mixed active site in solution. Such a composite active site structure should result in unilateral cleavage by the complemented heterodimer; this has been confirmed by the use of a cruciform substrate. Based upon analogy with closely similar restriction enzyme active sites and our mutagenesis experiments, we propose a two-metal ion mechanism for the hydrolytic cleavage of DNA junctions.

Structure, folding and activity of the VS ribozyme: importance of the 2-3-6 helical junction.

The VS nucleolytic ribozyme has a core comprising five helices organized by two three-way junctions. The ribozyme can act in trans on a hairpin-loop substrate, with which it interacts via tertiary contacts. We have determined that one of the junctions (2-3-6) undergoes two-stage ion-dependent folding into a stable conformation, and have determined the global structure of the folded junction using long-range distance restraints derived from fluorescence resonance energy transfer. A number of sequence variants in the junction are severely impaired in ribozyme cleavage, and there is good correlation between changes in activity and alteration in the folding of junction 2-3-6. These studies point to a special importance of G and A nucleotides immediately adjacent to helix II, and comparison with a similar junction of known structure indicates that this could adopt a guanine-wedge structure. We propose that the 2-3-6 junction organizes important aspects of the structure of the ribozyme to facilitate productive association with the substrate, and suggest that this results in an interaction between the substrate and the A730 loop to create the active complex.

Thermodynamics of ion-induced RNA folding in the hammerhead ribozyme: an isothermal titration calorimetric study.

The hammerhead ribozyme undergoes a well-defined two-stage conformational folding process, induced by the binding of magnesium ions. In this study, we have used isothermal titration calorimetry to analyze the thermodynamics of magnesium binding and magnesium ion-induced folding of the ribozyme. Binding to the natural sequence ribozyme is strongly exothermic and can be analyzed in terms of sequential interaction at two sites with association constants K(A) = 480 and 2840 M(-1). Sequence variants of the hammerhead RNA give very different isothermal titration curves. An A14G variant that cannot undergo ion-induced folding exhibits endothermic binding. By contrast, a deoxyribose G5 variant that can undergo only the first of the two folding transitions gives a complex titration curve. However, despite these differences the ITC data for all three species can be analyzed in terms of the sequential binding of magnesium ions at two sites. While the binding affinities are all in the region of 10(3) M(-1), corresponding to free energies of Delta G degrees = -3.5 to -4 kcal mol(-1), the enthalpic and entropic contributions show much greater variation. The ITC experiments are in good agreement with earlier conformational studies of the folding of the ion-induced folding of the hammerhead ribozyme.

Crystal structure of the Holliday junction resolving enzyme T7 endonuclease I.

We have solved the crystal structure of the Holliday junction resolving enzyme T7 endonuclease I at 2.1 A resolution using the multiwavelength anomalous dispersion (MAD) technique. Endonuclease I exhibits strong structural specificity for four-way DNA junctions. The structure shows that it forms a symmetric homodimer arranged in two well-separated domains. Each domain, however, is composed of elements from both subunits, and amino acid side chains from both protomers contribute to the active site. While no significant structural similarity could be detected with any other junction resolving enzyme, the active site is similar to that found in several restriction endonucleases. T7 endonuclease I therefore represents the first crystal structure of a junction resolving enzyme that is a member of the nuclease superfamily of enzymes.

Structures of helical junctions in nucleic acids.

Our knowledge of the architectural principles of nucleic acid junctions has seen significant recent advances. The conformation of DNA junctions is now well understood, and this provides a new basis for the analysis of important structural elements in RNA. The most significant new data have come from X-ray crystallography of four-way DNA junctions; incidentally showing the great importance of serendipity in science, since none of the three groups had deliberately set out to crystallise a junction. Fortunately the results confirm, and of course extend, the earlier conformational studies of DNA junctions in almost every detail. This is important, because it means that these methods can be applied with greater confidence to new systems, especially in RNA. Methods like FRET, chemical probing and even the humble polyacrylamide gel can be rapid and very powerful, allowing the examination of a large number of sequence variants relatively quickly. Molecular modelling in conjunction with experiments is also a very important component of the general approach. Ultimately crystallography provides the gold standard for structural analysis, but the other, simple approaches have considerable value along the way. At the beginning of this review I suggested two simple folding principles for branched nucleic acids, and it is instructive to review these in the light of recent data. In brief, these were the tendency for pairwise coaxial stacking of helical arms, and the importance of metal ion interactions in the induction of folding. We see that both are important in a wide range of systems, both in DNA and RNA. The premier example is the four-way DNA junction, which undergoes metal ion-induced folding into the stacked X-structure that is based on coaxial stacking of arms. As in many systems, there are two alternative ways to achieve this depending on the choice of stacking partners. Recent data reveal that both forms often exist in a dynamic equilibrium, and that the relative stability of the two conformers depends upon base sequence extending a significant distance from the junction. The three-way junction has provided a good test of the folding principles. Perfect three-way (3H) DNA junctions seem to defy these principles in that they appear reluctant to undergo coaxial stacking of arms, and exhibit little change in conformation with addition of metal ions. Modelling suggests that such a junction is stereochemically constrained in an extended conformation. However, upon inclusion of a few additional base pairs at the centre (to create a 3HS2 junction for example) the additional stereochemical flexibility allows two arms to undergo coaxial stacking. Such a junction exhibits all the properties consistent with the general folding principles, with ion-induced folding into a form based on pairwise coaxial stacking of arms in one of two different conformers. The three-way junction is therefore very much the exception that proves the rule. It is instructive to compare the folding of corresponding species in DNA and RNA, where we find both similarities and differences. The RNA four-way junction can adopt a structure that is globally similar to the stacked X-structure (Duckett et al. 1995a), and the crystal structure of the DNAzyme shows that the stacked X-conformation can include one helical pair in the A-conformation (Nowakowski et al. 1999). However, modelling suggests that the juxtaposition of strands and grooves will be less satisfactory in RNA, and the higher magnesium ion concentration required to fold the RNA junction indicates a lower stability of the antiparallel form. Perhaps the biggest difference between the properties of the DNA and RNA four-way junctions is the lack of an unstacked structure at low salt concentrations for the RNA species. This clearly reflects a major difference in the electrostatic interactions in the RNA junction. In general the folding of branched DNA provides some good indications on the likely folding of the corresponding RNA species, but caution is required in making the extrapolation because the two polymers are significantly different. A number of studies point to the flexibility and malleability of branched nucleic acids, and this turns out to have particular significance in their interactions with proteins. Proteins such as the DNA junction-resolving enzymes exhibit considerable selectivity for the structure of their substrates, which is still not understood at a molecular level. Despite this, it appears to be universally true that these proteins distort the global, and in some cases at least the local, structure of the junctions. The somewhat perplexing result is that the proteins appear to distort the very property that they recognise. In general it seems that four-way DNA junctions are opened to one extent or another by interaction with proteins. (ABSTRACT TRUNCATED)

Ensuring productive resolution by the junction-resolving enzyme RuvC: large enhancement of the second-strand cleavage rate.

RuvC is the principal junction-resolving enzyme of Escherichia coli, cleaving four-way DNA junctions created in homologous recombination. It binds with structural specificity to DNA junctions as a dimer, whereupon each subunit cleaves a phosphodiester bond of diametrically disposed strands. To generate a productive resolution event, these cleavages must be symmetrically located with respect to the point of strand exchange, and in the context of a branch-migrating junction, this requires near-simultaneous cleavage by the two subunits. Using a supercoil-stabilized cruciform as a substrate, we have analyzed the kinetics of strand cleavage. Coordinated bilateral cleavage is not essential in RuvC action, because a heterodimer comprising active and inactive subunits is active in unilateral cleavage. However, in operational terms, fully active RuvC appears to introduce simultaneous cleavages of two strands, because the rate of second-strand cleavage is accelerated by a factor of almost 150 relative to the first. We suggest that relief of strain following the first cleavage could lead to acceleration of subsequent cleavage, and show that DNA junctions rendered more flexible by the presence of strand breaks or bulges are subject to faster cleavage by RuvC. Cleavage of one strand of a junction generated in situ by the action of RuvC can accelerate cleavage at an intrinsically poor site by a factor of 500. Very large rate enhancement of second-strand cleavage by RuvC is likely to be essential to ensure productive resolution of a junction that is being actively branch migrated by the RuvAB machinery.

Fluorescence resonance energy transfer as a structural tool for nucleic acids.

Fluorescence resonance energy transfer is a spectroscopic method that provides distance information on macromolecules in solution in the range 20-80 A. It is particularly suited to the analysis of the global structure of nucleic acids because the long-range distance information provides constraints when modelling these important structures. The application of fluorescence resonance energy transfer to nucleic acid structure has seen a resurgence of interest in the past decade, which continues to increase. An especially exciting development is the recent extension to single-molecule studies.

Location of cyanine-3 on double-stranded DNA: importance for fluorescence resonance energy transfer studies.

Fluorescence resonance energy transfer provides valuable long-range distance information about macromolecules in solution. Fluorescein and Cy3 are an important donor-acceptor pair of fluorophores; the characteristic Förster length for this pair on DNA is 56 A, so the pair can be used to study relatively long distances. Measurement of FRET efficiency for a series of DNA duplexes terminally labeled with fluorescein and Cy3 suggests that the Cy3 is close to the helical axis of the DNA. An NMR analysis of a self-complementary DNA duplex 5'-labeled with Cy3 shows that the fluorophore is stacked onto the end of the helix, in a manner similar to that of an additional base pair. This provides a known point from which distances calculated from FRET measurements are measured. Using the FRET efficiencies for the series of DNA duplexes as restraints, we have determined an effective position for the fluorescein, which is maximally extended laterally from the helix. The knowledge of the fluorophore positions can now be used for more precise interpretation of FRET data from nucleic acids.