ABSTRACT
NiFe-based oxides are one of the best-known active oxygen evolution electrocatalysts. Unfortunately, they rapidly lost performance in Fe-purified KOH during the reaction. Herein, tetraphenylporphyrin (TPP) was loaded on a catalyst/electrolyte interface to alleviate the destabilization of NiFe (oxy)hydroxide. We propose that the degradation occurs primarily due to the release of thermodynamically unstable Fe. TPP acts as a protective layer and suppresses the dissolution of hydrated metal at the catalyst/electrolyte interface. In the electric double layer, the nonpolar TPP layer on the NiFe surface also invigorates the redeposition of the active site, Fe, which leads to prolonging the lifetime of NiFe. The TPP-coated NiFe was demonstrated in anion exchange membrane water electrolysis, where hydrogen was generated at a rate of 126â L h-1 for 115â h at a 1.41â mV h-1 degradation rate. Consequently, TPP is a promising protective layer that could stabilize oxygen evolution electrocatalysts.
ABSTRACT
Oxygen-based electrocatalysis is an integral aspect of a clean and sustainable energy conversion/storage system. The development of economic bifunctional electrocatalysts with high activity and durability during reversible reactions remains a great challenge. The tailored porous structure and separately presented active sites for oxygen reduction and oxygen evolution reactions (ORR and OER) without mutual interference are most crucial for achieving desired bifunctional catalysts. Here, we report a hybrid composed of sheath-core cobalt oxynitride (CoOx@CoNy) nanorods grown perpendicularly on N-doped carbon nanofiber (NCNF). The brush-like CoOx@CoNy nanorods, composed of metallic Co4N cores and oxidized surfaces, exhibit excellent OER activity (E = 1.69 V at 10 mA cm-2) in an alkaline medium. Although pristine NCNF or CoOx@CoNy alone had poor catalytic activity in the ORR, the hybrid showed dramatically enhanced ORR performance (E = 0.78 V at -3 mA cm-2). The experimental results coupled with a density functional theory (DFT) simulation confirmed that the broad surface area of the CoOx@CoNy nanorods with an oxidized skin layer boosts the catalytic OER, while the facile adsorption of ORR intermediates and a rapid interfacial charge transfer occur at the interface between the CoOx@CoNy nanorods and the electrically conductive NCNF. Furthermore, it was found that the independent catalytic active sites in the CoOx@CoNy/NCNF catalyst are continuously regenerated and sustained without mutual interference during the round-trip ORR/OER, affording stable operation of Zn-air batteries.
ABSTRACT
Polymer electrolyte membrane unitized regenerative fuel cells (PEM-URFCs) require bifunctional porous transport layers (PTLs) to play contradictory roles in a single unitized system: hydrophobicity for water drainage in the fuel cell (FC) mode and hydrophilicity for water supplement in the electrolysis cell (EC) mode. Here, we report a high-performance amphiphilic Ti PTL suitable for both FC and EC modes, thanks to alternating hydrophobic and hydrophilic channels. To fabricate the amphiphilic PTL, we used a shadow mask patterning process using ultrathin polydimethylsiloxane (PDMS) brush as a hydrophobic surface modifier, which can change the Ti PTL's surface polarity without decreasing its electrical conductivity. Consequently, performance improved by 4.3 times in FC (@ 0.6 V) and 1.9 times in EC (@ 1.8 V) from amphiphilic PTL. To elucidate reason for performance enhancement, discrete gas emission through the hydrophobic channels in amphiphilic PTL was verified under scanning electrochemical microscopy.
ABSTRACT
Despite highly promising characteristics of three-dimensionally (3D) nanostructured catalysts for the oxygen evolution reaction (OER) in polymer electrolyte membrane water electrolyzers (PEMWEs), universal design rules for maximizing their performance have not been explored. Here we show that woodpile (WP)-structured Ir, consisting of 3D-printed, highly-ordered Ir nanowire building blocks, improve OER mass activity markedly. The WP structure secures the electrochemically active surface area (ECSA) through enhanced utilization efficiency of the extended surface area of 3D WP catalysts. Moreover, systematic control of the 3D geometry combined with theoretical calculations and various electrochemical analyses reveals that facile transport of evolved O2 gas bubbles is an important contributor to the improved ECSA-specific activity. The 3D nanostructuring-based improvement of ECSA and ECSA-specific activity enables our well-controlled geometry to afford a 30-fold higher mass activity of the OER catalyst when used in a single-cell PEMWE than conventional nanoparticle-based catalysts.
ABSTRACT
Electrically conductive polypyrrole (PPy) is an intriguing biomaterial capable of efficient electrical interactions with biological systems. Especially, biomimetic PPy-based biomaterials incorporating biomolecules, such as hyaluronic acid (HA), can impart the characteristic biological interactions with living cells/tissues to the conductive biomaterials. Here we report the effects of the molecular weight (MW) of HA on PPy-based biomaterials. We utilized HA of a wide range of MW (35â¯×â¯103â¯Da-3â¯×â¯106â¯Da) as dopants during the electrochemical production of PPy/HA films and their characterization of materials and cellular interactions. With increases in the MWs of HA dopants, PPy/HA exhibited more hydrophilic, higher electrochemical activity and lower impedance. In vitro studies revealed that PPy films doped with low MW HA were supportive to cell adhesion and growth, while PPy films doped with high MW HA were resistant to cell attachment. Subcutaneous implantation of the PPy/HA films for 4â¯weeks revealed that all the PPy/HA films were tissue compatible. We successfully demonstrate the importance of HA dopant MWs in modulating the chemical and electrical properties of the materials and cellular responses to the materials. Such materials have potential for various biomedical applications, including as tissue engineering scaffolds and as electrodes for neural recording and neuromodulation. STATEMENT OF SIGNIFICANCE: Hyaluronic acid (HA)-doped polypyrrole (PPy) films were electrochemically synthesized as novel biomimetic conductive materials capable of efficient electrical signaling and preferential biological interactions. Molecular weights (MWs) of HA varied in a wide range (35â¯×â¯103-2â¯×â¯106â¯Da) and critically determine chemical, electrochemical, and biological properties of PPy/HA. Especially, PPy films with low MW HA markedly support cell adhesion and growth, while PPy films with high MW HA are resistant to cell attachment. Furthermore, PPy/HA exhibits greatly improved tissue compatibility and in vivo EMG signal recording ability. We for the first time demonstrate that biomimetic PPy/HA-based biomaterials can serve as versatile and effective platforms for various biomedical applications, such as tissue engineering scaffolds and bioelectrodes.
Subject(s)
Biomimetic Materials/chemistry , Electric Conductivity , Hyaluronic Acid/chemistry , Polymers/chemistry , Pyrroles/chemistry , Animals , Cell Line, Tumor , Electrochemistry , Electromyography , Female , Humans , Mice , Molecular Weight , NIH 3T3 Cells , Polymerization , Rats , Signal Processing, Computer-Assisted , Surface Properties , Tin Compounds/chemistryABSTRACT
Here we report the preparation of hollow microspheres with a thin shell composed of mixed cobalt nitride (Co-N) and cobalt oxide (Co-O) nanofragments encapsulated in thin layers of nitrogen-doped carbon (N-C) nanostructure (Co-N/Co-O@N-C) arrays with enhanced bifunctional oxygen electrochemical performance. The hybrid structures are synthesized via heat treatment of N-doped hollow carbon microspheres with cobalt nitrate, and both the specific ratio of these precursors and the selected annealing temperature are found to be the key factors for the formation of the unique hybrid structure. The as-obtained product (Co-N/Co-O@N-C) presents a large specific surface area (493 m2 g-1), high-level heteroatom doping (Co-N, Co-O, and N-C), and hierarchical porous nanoarchitecture containing macroporous frameworks and mesoporous walls. Electronic interaction between the thin N-C layers and the encapsulated Co-N and Co-O nanofragments efficiently optimizes oxygen adsorption properties on the Co-N/Co-O@N-C and thereby triggers bifunctional oxygen electrochemical activity at the surface. The Co-N/Co-O@N-C nanohybrid exhibited a high onset potential of 0.93 V, and a limiting current density of 5.6 mA cm-2 indicating 4-electron oxygen reduction reaction (ORR), afforded high catalytic activity for the oxygen evolution reaction (OER) and even exceeded the catalytic stability of the commercial precious electrocatalysts; furthermore, when integrated into the oxygen electrode of a regenerative fuel cell device, it exhibited high-performance oxygen electrodes for both the ORR and the OER.
ABSTRACT
Photoelectrochemical (PEC) cells are promising tools for renewable and sustainable solar energy conversion. Currently, their inadequate performance and high cost of the noble metals used in the electrocatalytic counter electrode have postponed the practical use of PEC cells. In this study, we report the electrochemical synthesis of nanoporous tungsten carbide and its application as a reduction catalyst in PEC cells, namely, dye-sensitized solar cells (DSCs) and PEC water splitting cells, for the first time. The method employed in this study involves the anodization of tungsten foil followed by post heat treatment in a CO atmosphere to produce highly crystalline tungsten carbide film with an interconnected nanostructure. This exhibited high catalytic activity for the reduction of cobalt bipyridine species, which represent state-of-the-art redox couples for DSCs. The performance of tungsten carbide even surpassed that of Pt, and a substantial increase (â¼25%) in energy conversion efficiency was achieved when Pt was substituted by tungsten carbide film as the counter electrode. In addition, tungsten carbide displayed decent activity as a catalyst for the hydrogen evolution reaction, suggesting the high feasibility for its utilization as a cathode material for PEC water splitting cells, which was also verified in a two-electrode water photoelectrolyzer.