In Situ Synthesis and Microfabrication of High Entropy Alloy and Oxide Compounds by Femtosecond Laser Direct Writing under Ambient Conditions.

Synthesis and coating of multi-metal oxides (MMOs) and alloys on conductive substrates are indispensable to electrochemical applications, yet demand multiple, resource-intensive, and time-consuming processes. Herein, an alternative approach to the synthesis and coating of alloys and MMOs by femtosecond laser direct writing (FsLDW) is reported. A solution-based precursor ink is deposited and dried on the substrate and illuminated by a femtosecond laser. During the illumination, dried precursor ink is transformed to MMO/alloys and is simultaneously bonded to the substrate. The formulation of the alloy and MMO precursor ink for laser processing is universally applicable to a large family of oxides and alloys. The process is conducted at room temperature and in an open atmosphere. To demonstrate, a large family of 57 MMOs and alloys are synthesized from a group of 13 elements. As a proof of concept, Ni0.24 Co0.23 Cu0.24 Fe0.15 Cr0.14 high entropy alloy synthesized on stainless-steel foil by FsLDW is used for the oxygen evolution reaction, which achieves a current density of 10 mA cm-2 at a significantly low overpotential of 213 mV. Further, FsLDW can also achieve microfabrication of alloys/MMO with feature sizes down to 20 µm.

Author Correction: Transcriptome and functional analysis reveals hybrid vigor for oil biosynthesis in oil palm.

A correction has been published and is appended to both the HTML and PDF versions of this paper. The error has been fixed in the paper.

Single-Step Selective Laser Writing of Flexible Photodetectors for Wearable Optoelectronics.

The increasing demand for wearable optoelectronics in biomedicine, prosthetics, and soft robotics calls for innovative and transformative technologies that permit facile fabrication of compact and flexible photodetectors with high performance. Herein, by developing a single-step selective laser writing strategy that can finely tailor material properties through incident photon density control and lead to the formation of hierarchical hybrid nanocomposites, e.g., reduced graphene oxide (rGO)-zinc oxide (ZnO), a highly flexible and all rGO-ZnO hybrid-based photodetector is successfully constructed. The device features 3D ultraporous hybrid films with high photoresponsivity as the active detection layer, and hybrid nanoflakes with superior electrical conductivity as interdigitated electrodes. Benefitting from enhanced photocarrier generation because of the ultraporous film morphology, efficient separation of electron-hole pairs at rGO-ZnO heterojunctions, and fast electron transport by highly conductive rGO nanosheets, the photodetector exhibits high, linear, and reproducible responsivities to a wide range of ultraviolet (UV) intensities. Furthermore, the excellent mechanical flexibility and robustness enable the photodetector to be conformally attached to skin, thus intimately monitoring the exposure dosage of human body to UV light for skin disease prevention. This study advances the fabrication of flexible optoelectronic devices with reduced complexity, facilitating the integration of wearable optoelectronics and epidermal systems.

Comparative transcriptome analysis of oil palm flowers reveals an EAR-motif-containing R2R3-MYB that modulates phenylpropene biosynthesis.

BACKGROUND: Oil palm is the most productive oil crop and the efficiency of pollination has a direct impact on the yield of oil. Pollination by wind can occur but maximal pollination is mediated by the weevil E. kamerunicus. These weevils complete their life cycle by feeding on male flowers. Attraction of weevils to oil palm flowers is due to the emission of methylchavicol by both male and female flowers. In search for male flowers, the weevils visit female flowers by accident due to methylchavicol fragrance and deposit pollen. Given the importance of methylchavicol emission on pollination, we performed comparative transcriptome analysis of oil palm flowers and leaves to identify candidate genes involved in methylchavicol production in flowers. RESULTS: RNA sequencing (RNA-Seq) of male open flowers, female open flowers and leaves was performed using Illumina HiSeq 2000 platform. Analysis of the transcriptome data revealed that the transcripts of methylchavicol biosynthesis genes were strongly up-regulated whereas transcripts encoding genes involved in lignin production such as, caffeic acid O-methyltransferase (COMT) and Ferulate-5-hydroxylase (F5H) were found to be suppressed in oil palm flowers. Among the transcripts encoding transcription factors, an EAR-motif-containing R2R3-MYB transcription factor (EgMYB4) was found to be enriched in oil palm flowers. We determined that EgMYB4 can suppress the expression of a monolignol pathway gene, EgCOMT, in vivo by binding to the AC elements present in the promoter region. EgMYB4 was further functionally characterized in sweet basil which also produces phenylpropenes like oil palm. Transgenic sweet basil plants showed significant reduction in lignin content but produced more phenylpropenes. CONCLUSIONS: Our results suggest that EgMYB4 possibly restrains lignin biosynthesis in oil palm flowers thus allowing enhanced carbon flux into the phenylpropene pathway. This study augments our understanding of the diverse roles that EAR-motif-containing MYBs play to fine tune the metabolic flux along the various branches of core phenylpropanoid pathway. This will aid in metabolic engineering of plant aromatic compounds.

Genome-wide identification of markers for selecting higher oil content in oil palm.

BACKGROUND: Oil palm (Elaeis guineensis, Jacq.) is the most important source of edible oil. The improvement of oil yield is currently slow in conventional breeding programs due to long generation intervals. Marker-assisted selection (MAS) has the potential to accelerate genetic improvement. To identify DNA markers associated with oil content traits for MAS, we performed quantitative trait loci (QTL) mapping using genotyping by sequencing (GBS) in a breeding population derived from a cross between Deli Dura and Ghana Pisifera, containing 153 F1 trees. RESULTS: We constructed a high-density linkage map containing 1357 SNPs and 123 microsatellites. The 16 linkage groups (LGs) spanned 1527 cM, with an average marker space of 1.03 cM. One significant and three suggestive QTL for oil to bunch (O/B) and oil to dry mesocarp (O/DM) were mapped on LG1, LG8, and LG10 in a F1 breeding population, respectively. These QTL explained 7.6-13.3% of phenotypic variance. DNA markers associated with oil content in these QTL were identified. Trees with beneficial genotypes at two QTL for O/B showed an average O/B of 30.97%, significantly (P < 0.01) higher than that of trees without any beneficial QTL genotypes (average O/B of 28.24%). QTL combinations showed that the higher the number of QTL with beneficial genotypes, the higher the resulting average O/B in the breeding population. CONCLUSIONS: A linkage map with 1480 DNA markers was constructed and used to identify QTL for oil content traits. Pyramiding the identified QTL with beneficial genotypes associated with oil content traits using DNA markers has the potential to accelerate genetic improvement for oil yield in the breeding population of oil palm.

Transcriptome and functional analysis reveals hybrid vigor for oil biosynthesis in oil palm.

Oil palm is the most productive oil crop in the world and composes 36% of the world production. However, the molecular mechanisms of hybrids vigor (or heterosis) between Dura, Pisifera and their hybrid progeny Tenera has not yet been well understood. Here we compared the temporal and spatial compositions of lipids and transcriptomes for two oil yielding organs mesocarp and endosperm from Dura, Pisifera and Tenera. Multiple lipid biosynthesis pathways are highly enriched in all non-additive expression pattern in endosperm, while cytokinine biosynthesis and cell cycle pathways are highly enriched both in endosperm and mesocarp. Compared with parental palms, the high oil content in Tenera was associated with much higher transcript levels of EgWRI1, homolog of Arabidopsis thaliana WRINKLED1. Among 338 identified genes in lipid synthesis, 207 (61%) has been identified to contain the WRI1 specific binding AW motif. We further functionally identified EgWRI1-1, one of three EgWRI1 orthologs, by genetic complementation of the Arabidopsis wri1 mutant. Ectopic expression of EgWRI1-1 in plant produced dramatically increased seed mass and oil content, with oil profile changed. Our findings provide an explanation for EgWRI1 as an important gene contributing hybrid vigor in lipid biosynthesis in oil palm.

Draft genome sequence of an elite Dura palm and whole-genome patterns of DNA variation in oil palm.

Oil palm is the world's leading source of vegetable oil and fat. Dura, Pisifera and Tenera are three forms of oil palm. The genome sequence of Pisifera is available whereas the Dura form has not been sequenced yet. We sequenced the genome of one elite Dura palm, and re-sequenced 17 palm genomes. The assemble genome sequence of the elite Dura tree contained 10,971 scaffolds and was 1.701 Gb in length, covering 94.49% of the oil palm genome. 36,105 genes were predicted. Re-sequencing of 17 additional palm trees identified 18.1 million SNPs. We found high genetic variation among palms from different geographical regions, but lower variation among Southeast Asian Dura and Pisifera palms. We mapped 10,000 SNPs on the linkage map of oil palm. In addition, high linkage disequilibrium (LD) was detected in the oil palms used in breeding populations of Southeast Asia, suggesting that LD mapping is likely to be practical in this important oil crop. Our data provide a valuable resource for accelerating genetic improvement and studying the mechanism underlying phenotypic variations of important oil palm traits.

A consensus linkage map of oil palm and a major QTL for stem height.

Oil palm (Elaeis guinensis Jacquin) is the most important source of vegetable oil and fat. Several linkage maps had been constructed using dominant and co-dominant markers to facilitate mapping of QTL. However, dominant markers are not easily transferable among different laboratories. We constructed a consensus linkage map for oil palm using co-dominant markers (i.e. microsatellite and SNPs) and two F1 breeding populations generated by crossing Dura and Pisifera individuals. Four hundreds and forty-four microsatellites and 36 SNPs were mapped onto 16 linkage groups. The map length was 1565.6 cM, with an average marker space of 3.72 cM. A genome-wide scan of QTL identified a major QTL for stem height on the linkage group 5, which explained 51% of the phenotypic variation. Genes in the QTL were predicted using the palm genome sequence and bioinformatic tools. The linkage map supplies a base for mapping QTL for accelerating the genetic improvement, and will be also useful in the improvement of the assembly of the genome sequences. Markers linked to the QTL may be used in selecting dwarf trees. Genes within the QTL will be characterized to understand the mechanisms underlying dwarfing.