Synthesis and optical and electronic properties of one-dimensional sulfoxonium-based hybrid metal halide (CH3)3SOPbI3.

We report the synthesis and optical and electronic properties of a one-dimensional sulfoxonium-based hybrid metal halide in an orthorhombic crystal system with a Pnma space group. To provide direct insights, a method is developed to calculate tolerance factors with the ionic radii of non-spherical cations from X-ray crystallographic data.

Improvement of CH3NH3PbI3 Formation for Efficient and Better Reproducible Mesoscopic Perovskite Solar Cells.

High-performance perovskite solar cells (PSCs) are obtained through optimization of the formation of CH3NH3PbI3 nanocrystals on mesoporous TiO2 film, using a two-step sequential deposition process by first spin-coating a PbI2 film and then submerging it into CH3NH3I solution for perovskite conversion (PbI2 + CH3NH3I → CH3NH3PbI3). It is found that the PbI2 morphology from different film formation process (thermal drying, solvent extraction, and as-deposited) has a profound effect on the CH3NH3PbI3 active layer formation and its nanocrystalline composition. The residual PbI2 in the active layer contributes to substantial photocurrent losses, thus resulting in low and inconsistent PSC performances. The PbI2 film dried by solvent extraction shows enhanced CH3NH3PbI3 conversion as the loosely packed disk-like PbI2 crystals allow better CH3NH3I penetration and reaction in comparison to the multicrystal aggregates that are commonly obtained in the thermally dried PbI2 film. The as-deposited PbI2 wet film, without any further drying, exhibits complete conversion to CH3NH3PbI3 in MAI solution. The resulting PSCs reveal high power conversion efficiency of 15.60% with a batch-to-batch consistency of 14.60 ± 0.55%, whereas a lower efficiency of 13.80% with a poorer consistency of 11.20 ± 3.10% are obtained from the PSCs using thermally dried PbI2 films.

Pure blue-light emissive poly(oligofluorenes) with bifunctional poss in the main chain.

Emission of conjugated polymers is known to undergo bathochromic shift from solution to film formation due to π-π stacking in the solid state. In this report, a series of pearl-necklace-like hybrid polymers is designed via the hydrosilylation condensation between bifunctional polyhedral oligomeric silsesquioxanes (B-POSS) and oligofluorene segments. Optoelectronic analyses unequivocally show that the presence of these interconnecting B-POSS can effectively reduce red-shift in photoluminescence and electroluminescence during film formation. These hybrid poly(oligofluorenes) display stable blue emission with high color purity. Thermal analyses also indicate that they are vitrified polymers with high glass transition temperature (up to 125 °C). We believe that this strategy can be extended to other conjugated systems to control color purity in electroactive materials and holds promise as new emissive materials for various applications.

Synthesis and photovoltaic properties of two-dimensional low-bandgap copolymers based on new benzothiadiazole derivatives with different conjugated arylvinylene side chains.

A new series of 2,1,3-benzothiadiazole (BT) acceptors with different conjugated aryl-vinylene side chains have been designed and used to build efficient low-bandgap (LBG) photovoltaic copolymers. Based on benzo[1,2-b:3,4-b']dithiophene and the resulting new BT derivatives, three two-dimensional (2D)-like donor (D)-acceptor (A) conjugated copolymers have been synthesised by Stille coupling polymerisation. These copolymers were characterised by NMR spectroscopy, gel-permeation chromatography, thermogravimetric analysis and differential scanning calorimetry. UV/Vis absorption and cyclic voltammetry measurements indicated that their optical and electrochemical properties can be facilely modified by changing the structures of the conjugated aryl-vinylene side chains. The copolymer with phenyl-vinylene side chains exhibited the best light harvesting and smallest bandgap of the three copolymers. The basic electronic structures of D-A model compounds of these copolymers were also studied by DFT calculations at the B3LYP/6-31G* level of theory. Polymer solar cells (PSCs) with a typical structure of indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/copolymer:[6,6]-phenyl-C(61) (C(71))-butyric acid-methyl ester (PCBM)/calcium (Ca)/aluminum (Al) were fabricated and measured under the illumination of AM1.5G at 100 mW cm(-2). The results showed that the device based on the copolymer with phenyl-vinylene side chains had the highest efficiency of 2.17 % with PC(71)BM as acceptor. The results presented herein indicate that all the prepared copolymers are promising candidates for roll-to-roll manufacturing of efficient PSCs. Suitable electronic, optical and photovoltaic properties of BT-based copolymers can also be achieved by fine-tuning the structures of the aryl-vinylene side chains for photovoltaic application.

A random copolymer based on dithienothiophene and diketopyrrolopyrrole units for high performance organic solar cells.

A random donor-acceptor semiconducting copolymer based on diketopyrrolopyrrole as the acceptor unit and dithienothiophene as the donor unit has been synthesized and characterized. Preliminary studies of BHJ solar cells based on this polymer with PC(71)BM showed a high PCE of above 5% under 100 mW cm(-2) AM1.5 solar illumination.

Conductivity switching and electronic memory effect in polymers with pendant azobenzene chromophores.

Electronic memory devices having the indium-tin oxide/polymer/Al sandwich structure were fabricated from polymers containing pendant azobenzene chromophores in donor-acceptor structures. The reversibility, or rewritability, of the high-conductivity (ON) state was found to be dependent on the terminal moiety of the azobenzene chromophore. While the polymers with electron-accepting terminal moieties (-Br or -NO2) in the pendant azobenzene exhibit write-once, read-many-times (WORM) type memory behavior, those with electron-donating terminal moieties (-OCH3) exhibit rewritable (FLASH) memory behavior. The WORM memory devices have low switching ("write") voltages below -2 V and high ON/OFF current ratios of about 10(4)-10(6). The polarity of the "write" voltage can be reversed by using an electrode with a higher work function than Al, thus excluding metallic filamentary conduction as a cause of the bistable switching phenomenon. The FLASH memory devices have low "write" and "erase" voltages of about -1.7 to -1.8 V and 2.0 to 2.2 V, respectively, and ON/OFF current ratios of about 10(3)-10(4). The electrical bistability observed can be attributed to charge trapping at the azobenzene chromophores, resulting in the charge-separated, high-conductivity state. The proposed mechanism is supported experimentally by a red shift and peak broadening in the UV-visible absorption spectra of the polymer films resulting from the OFF-to-ON electrical transition.

Nonvolatile polymer memory device based on bistable electrical switching in a thin film of poly(N-vinylcarbazole) with covalently bonded C60.

A functional polymer (PVK-C60), containing carbazole moieties (electron donors) and fullerene moieties (electron-acceptors) in a molar ratio of about 100:1, was synthesized via covalent tethering of C60 to poly(N-vinylcarbazole) (PVK). The molecular structure and composition of PVK-C60 were characterized by FTIR, Raman, and UV-vis absorption spectroscopy, gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CyV). The C60-modified PVK exhibited an enhanced glass-transition temperature (Tg = 226 degrees C) and good solubility in organic solvents such as toluene, tetrahydrofuran, chloroform, and N,N-dimethylformamide (DMF). It could be cast into transparent films from solutions. For a thin film of PVK-C60 sandwiched between an indium tin oxide (ITO) electrode and an Al electrode (ITO/PVK-C60/Al), the device behaved as nonvolatile flash (rewritable) memory with accessible electronic states that could be written, read, and erased. The polymer memory exhibited an ON/OFF current ratio of more than 105 and write/erase voltages around -2.8 V/+3.0 V. Both the ON and OFF states were stable under a constant voltage stress of -1 V for 12 h and survived up to 108 read cycles at -1 V under ambient conditions.