Photocatalytic Abstraction of Hydrogen Atoms from Water Using Hydroxylated Graphitic Carbon Nitride for Hydrogenative Coupling Reactions.

Employing pure water, the ultimate green source of hydrogen donor to initiate chemical reactions that involve a hydrogen atom transfer (HAT) step is fascinating but challenging due to its large H-O bond dissociation energy (BDEH-O =5.1 eV). Many approaches have been explored to stimulate water for hydrogenative reactions, but the efficiency and productivity still require significant enhancement. Here, we show that the surface hydroxylated graphitic carbon nitride (gCN-OH) only requires 2.25 eV to activate H-O bonds in water, enabling abstraction of hydrogen atoms via dehydrogenation of pure water into hydrogen peroxide under visible light irradiation. The gCN-OH presents a stable catalytic performance for hydrogenative N-N coupling, pinacol-type coupling and dehalogenative C-C coupling, all with high yield and efficiency, even under solar radiation, featuring extensive impacts in using renewable energy for a cleaner process in dye, electronic, and pharmaceutical industries.

Contrasting Efficiency of Electron-Induced Reaction at Cu(110) in Aliphatic and Aromatic Bromides.

We report a comparative study of the electron-induced reaction of pentyl bromide (PeBr) and phenyl bromide (PhBr) on Cu(110) at 4.6 K, observed by scanning tunneling microscopy (STM). The induced dissociation of the intact adsorbed molecule for both reagents occurred at an energy of 2.0 eV, producing a hydrocarbon radical and a Br atom. Electron-induced C-Br bond dissociation was found to be a single-electron process for both reagents. The impulsive two-state (I2S) model was used to describe the Br atom recoil as due to molecular excitation to a repulsive anti-bonding state, in which recoil of the dissociation products occurred due to C·Br repulsion along the prior C-Br bond direction. The measured reaction yield was 3 orders of magnitude greater for PeBr, 2.0 × 10-7 reactive events per electron, than for PhBr with a yield of 1.7 × 10-10. The low yield of dissociation products from the aromatic PhBr was attributed to the presence of two additional anionic states below the 2.0 eV energy limit, absent for the aliphatic PeBr; these additional anionic states for PhBr could provide a pathway for electron transfer to the surface in the case of the aromatic, but not the aliphatic, anion. The consequent shorter lifetime of the repulsive aromatic anion of PhBr is consistent with the observation of shorter mean recoil distance (3.2 Å) of its Br dissociation product, as compared with the markedly longer recoil (8.7 Å) of Br observed from the anion of PeBr.

Boosting Photocatalytic Hydrogen Production by Modulating Recombination Modes and Proton Adsorption Energy.

Solar-driven production of renewable energy (e.g., H2) has been investigated for decades. To date, the applications are limited by low efficiency due to rapid charge recombination (both radiative and nonradiative modes) and slow reaction rates. Tremendous efforts have been focused on reducing the radiative recombination and enhancing the interfacial charge transfer by engineering the geometric and electronic structure of the photocatalysts. However, fine-tuning of nonradiative recombination processes and optimization of target reaction paths still lack effective control. Here we show that minimizing the nonradiative relaxation and the adsorption energy of photogenerated surface-adsorbed hydrogen atoms are essential to achieve a longer lifetime of the charge carriers and a faster reaction rate, respectively. Such control results in a 16-fold enhancement in photocatalytic H2 evolution and a 15-fold increase in photocurrent of the crystalline g-C3N4 compared to that of the amorphous g-C3N4.

Light-tuned selective photosynthesis of azo- and azoxy-aromatics using graphitic C3N4.

Solar-driven photocatalysis has attracted significant attention in water splitting, CO2 reduction and organic synthesis. The syntheses of valuable azo- and azoxyaromatic dyes via selective photoreduction of nitroaromatic compounds have been realised using supported plasmonic metal nanoparticles at elevated temperatures (≥90 °C); however, the high cost, low efficiency and poor selectivity of such catalyst systems at room temperature limit their application. Here we demonstrate that the inexpensive graphitic C3N4 is an efficient photocatalyst for selective syntheses of a series of azo- and azoxy-aromatic compounds from their corresponding nitroaromatics under either purple (410 nm) or blue light (450 nm) excitation. The high efficiency and high selectivity towards azo- and azoxy-aromatic compounds can be attributed to the weakly bound photogenerated surface adsorbed H-atoms and a favourable N-N coupling reaction. The results reveal financial and environmental potential of photocatalysis for mass production of valuable chemicals.

Photosystem II Acts as a Spin-Controlled Electron Gate during Oxygen Formation and Evolution.

The oxygen evolution complex (OEC) of photosystem II (PSII) is intrinsically more active than any synthetic alternative for the oxygen evolution reaction (OER). A crucial question to solve for the progress of artificial photosynthesis is to understand the influential interactions during water oxidation in PSII. We study the principles of interatomic electron transfer steps in OER, with emphasis on exchange interactions, revealing the influence of delocalizing ferromagnetic spin potentials during the catalytic process. The OEC is found to be an exchange coupled mixed-valence electron-spin acceptor where its orbital physics determine the unique activity of PSII. The two unpaired electrons needed in the triplet O2 molecule interact with the high spin state of the catalyst via exchange interactions; the optimal ferromagnetic catalyst and the resulting radical intermediates are spin paired. As a result, the active center of the CaMn4O5 cofactor, stimulated by the driving potential provided by photons, works as a spin valve to accelerate the formation and release of O2 from diamagnetic H2O.

Nondestructive imaging of atomically thin nanostructures buried in silicon.

It is now possible to create atomically thin regions of dopant atoms in silicon patterned with lateral dimensions ranging from the atomic scale (angstroms) to micrometers. These structures are building blocks of quantum devices for physics research and they are likely also to serve as key components of devices for next-generation classical and quantum information processing. Until now, the characteristics of buried dopant nanostructures could only be inferred from destructive techniques and/or the performance of the final electronic device; this severely limits engineering and manufacture of real-world devices based on atomic-scale lithography. Here, we use scanning microwave microscopy (SMM) to image and electronically characterize three-dimensional phosphorus nanostructures fabricated via scanning tunneling microscope-based lithography. The SMM measurements, which are completely nondestructive and sensitive to as few as 1900 to 4200 densely packed P atoms 4 to 15 nm below a silicon surface, yield electrical and geometric properties in agreement with those obtained from electrical transport and secondary ion mass spectroscopy for unpatterned phosphorus δ layers containing ~1013 P atoms. The imaging resolution was 37 ± 1 nm in lateral and 4 ± 1 nm in vertical directions, both values depending on SMM tip size and depth of dopant layers. In addition, finite element modeling indicates that resolution can be substantially improved using further optimized tips and microwave gradient detection. Our results on three-dimensional dopant structures reveal reduced carrier mobility for shallow dopant layers and suggest that SMM could aid the development of fabrication processes for surface code quantum computers.

Vibrational excitation induces double reaction.

Electron-induced reaction at metal surfaces is currently the subject of extensive study. Here, we broaden the range of experimentation to a comparison of vibrational excitation with electronic excitation, for reaction of the same molecule at the same clean metal surface. In a previous study of electron-induced reaction by scanning tunneling microscopy (STM), we examined the dynamics of the concurrent breaking of the two C-I bonds of ortho-diiodobenzene physisorbed on Cu(110). The energy of the incident electron was near the electronic excitation threshold of E0=1.0 eV required to induce this single-electron process. STM has been employed in the present work to study the reaction dynamics at the substantially lower incident electron energies of 0.3 eV, well below the electronic excitation threshold. The observed increase in reaction rate with current was found to be fourth-order, indicative of multistep reagent vibrational excitation, in contrast to the first-order rate dependence found earlier for electronic excitation. The change in mode of excitation was accompanied by altered reaction dynamics, evidenced by a different pattern of binding of the chemisorbed products to the copper surface. We have modeled these altered reaction dynamics by exciting normal modes of vibration that distort the C-I bonds of the physisorbed reagent. Using the same ab initio ground potential-energy surface as in the prior work on electronic excitation, but with only vibrational excitation of the physisorbed reagent in the asymmetric stretch mode of C-I bonds, we obtained the observed alteration in reaction dynamics.

Single-electron induces double-reaction by charge delocalization.

Injecting an electron by scanning tunneling microscope into a molecule physisorbed at a surface can induce dissociative reaction of one adsorbate bond. Here we show experimentally that a single low-energy electron incident on ortho-diiodobenzene physisorbed on Cu(110) preferentially induces reaction of both of the C-I bonds in the adsorbate, with an order-of-magnitude greater efficiency than for comparable cases of single bond breaking. A two-electronic-state model was used to follow the dynamics, first on an anionic potential-energy surface (pes*) and subsequently on the ground state pes. The model led to the conclusion that the two-bond reaction was due to the delocalization of added charge between adjacent halogen-atoms of ortho-diiodobenzene through overlapping antibonding orbitals, in contrast to the cases of para-dihalobenzenes, studied earlier, for which electron-induced reaction severed exclusively a single carbon-halogen bond. The finding that charge delocalization within a single molecule can readily cause concerted two-bond breaking suggests the more general possibility of intra- and also intermolecular charge delocalization resulting in multisite reaction. Intermolecular charge delocalization has recently been proposed by this laboratory to account for reaction in physisorbed molecular chains (Ning, Z.; Polanyi, J. C. Angew. Chem., Int. Ed. 2013, 52, 320-324).

Localized reaction at a smooth metal surface: p-diiodobenzene at Cu(110).

Halogenation at a semiconductor surface follows simple dynamics characterized by "localized reaction" along the direction of the halide bond being broken. Here we extend the study of halide reaction dynamics to the important environment of a smooth metal surface, where greater product mobility would be expected. Extensive examination of the physisorbed reagent and chemisorbed products from two successive electron-induced reactions showed, surprisingly, that for this system product localization and directionality described the dynamics at a metal. The reagent was p-diiodobenzene on Cu(110) at 4.6 K. The first C-I bond-breaking yielded chemisorbed iodophenyl and I-atom(#1), and the second yielded phenylene and I-atom(#2). The observed collinear reaction resulted in secondary encounters among products, which revealed the existence of a surface-aligned reaction. The molecular dynamics were well explained by a model embodying a transition between an a priori ground state and a semiempirical ionic state, which can be generally applied to electron-induced chemical reactions at surfaces.

Molecular calipers control atomic separation at a metal surface.

If a molecule controls the length of some other moiety, it can be termed a "molecular caliper". Here we image individual molecular calipers of this type by scanning tunneling microscopy. These consist of linear polymers of p-diiodobenzene, (pDIB)n, of varying length, 0.7-2.9 nm, physisorbed on Cu(110) at 4.6 K. Through electron-induced reaction these chemically imprint their terminal I-atoms on the copper, 0.7 nm further apart than their initial separations. The physisorbed monomer or polymer, therefore, constitutes a molecular-caliper with variable terminal I..I separation. The localized nature of the I-atom reaction at the copper surface relative to the parent molecule, constitutes a novel finding reported here. It ensures that the separation of the I-atoms in the physisorbed molecular caliper correlates with their subsequent separation when chemisorbed at the surface.

Surface-mediated chain reaction through dissociative attachment.

Chain reactions on a surface offer an important route to linear nanopatterning. We recently reported cooperative reactions on a silicon surface in which the reaction of one halogen atom with a silicon atom of a silicon dimer induced the halogenation of its neighbouring silicon atom through surface-mediated charge transfer. The reaction was unable to propagate further but here we describe how, by chemically bridging the gaps between the rows of these silicon dimers, this mechanism is able to form extended chains. The agents for chain growth are CH(3)Cl molecules that dissociatively attach CH(3) groups and chlorine atoms to silicon atoms from different dimers. By means of charge transfer through the surface, this gives rise to dangling bonds adjacent to the CH(3) groups and chlorine atoms (in effect, 'free radicals') that dissociate further incoming CH(3)Cl molecules, thereby providing the growing points for chains of indefinite length. This versatile mechanism of chain growth is examined in experiments and using ab initio theory.

Dipole-directed assembly of lines of 1,5-dichloropentane on silicon substrates by displacement of surface charge.

One-dimensional nanostructures at silicon surfaces have potential applications in nanoscale devices. Here we propose a mechanism of dipole-directed assembly for the growth of lines of physisorbed dipolar molecules. The adsorbate chosen was a halide, in preparation for the patterned imprinting of halogen atoms. Using scanning tunnelling microscopy, physisorbed 1,5-dichloropentane on Si(100)-2x1 was shown to self-assemble at room temperature into molecular lines that grew predominantly perpendicular to the Si-dimer rows. Line formation was triggered by the displacement of surface charge by the dipolar adsorbate. Experimental and simulated scanning tunnelling microscopy images were in agreement for a range of positive and negative bias voltages. The geometry of the physisorbed molecules and nature of their binding were evident from the scanning tunnelling microscopy images, as interpreted by scanning tunnelling microscopy simulation.