ABSTRACT
Our measurement of the soft X-ray emission of Mo plasmas produced by picosecond Nd:YAG lasers emitting on the fundamental (1064 nm, 150 ps) and second (532 nm, 130 ps) harmonics is presented. The contrast in intensity between spectral peaks and the intensity outside them is lower for the second harmonic produced plasmas probably due to the presence more intense satellite emission and higher optical thickness. The measured spectra are absolutely calibrated and the observed output photon flux was (7 - 9) × 1013 photons/sr in the water-window (2.3 - 4.4 nm) spectral range for a laser energy of 160 mJ independent of laser wavelength. However, in the short wavelength range 1.5 - 2 nm, the emission using the second harmonic is strongly enhanced and is even higher than for the maximum energy of 220 mJ of the fundamental wavelength, so despite inevitable energy losses, laser wavelength conversion may lead to emission enhancement in certain spectral ranges. This enhancement is attributed to higher absorption of short wavelength laser light and higher charge state generation in denser plasmas.
ABSTRACT
Short illumination wavelength allows an extension of the diffraction limit toward nanometer scale; thus, improving spatial resolution in optical systems. Soft X-ray (SXR) radiation, from "water window" spectral range, λ=2.3-4.4 nm wavelength, which is particularly suitable for biological imaging due to natural optical contrast provides better spatial resolution than one obtained with visible light microscopes. The high contrast in the "water window" is obtained because of selective radiation absorption by carbon and water, which are constituents of the biological samples. The development of SXR microscopes permits the visualization of features on the nanometer scale, but often with a tradeoff, which can be seen between the exposure time and the size and complexity of the microscopes. Thus, herein, we present a desk-top system, which overcomes the already mentioned limitations and is capable of resolving 60 nm features with very short exposure time. Even though the system is in its initial stage of development, we present different applications of the system for biology and nanotechnology. Construction of the microscope with recently acquired images of various samples will be presented and discussed. Such a high resolution imaging system represents an interesting solution for biomedical, material science, and nanotechnology applications.
