Spatially controlled diffusion range of tumor-associated angiogenic factors to develop a tumor model using a microfluidic resistive circuit.

Developing a tumor model with vessels has been a challenge in microfluidics. This difficulty is because cancer cells can overgrow in a co-culture system. The up-regulation of anti-angiogenic factors during the initial tumor development can hinder neovascularization. The standard method is to develop a quiescent vessel network before loading a tumor construct in an adjacent chamber, which simulates the interaction between a tumor and its surrounding vessels. Here, we present a new method that allows a vessel network and a tumor to develop simultaneously in two linked chambers. The physiological environment of these two chambers is controlled by a microfluidic resistive circuit using two symmetric long microchannels. Applying the resistive circuit, a diffusion-dominated environment with a small 2-D pressure gradient is created across the two chambers with velocity <10.9 nm s-1 and Péclet number <6.3 × 10-5. This 2-D pressure gradient creates a V-shaped velocity clamp to confine the tumor-associated angiogenic factors at pores between the two chambers, and it has two functions. At the early stage, vasculogenesis is stimulated to grow a vessel network in the vessel chamber with minimal influence from the tumor that is still developed in the adjacent chamber. At the post-tumor-development stage, the induced steep concentration gradient at pores mimics vessel-tumor interactions to stimulate angiogenesis to grow vessels toward the tumor. Applying this method, we demonstrate that vasculogenic vessels can grow first, followed by stimulating angiogenesis. Angiogenic vessels can grow into stroma tissue up to 1.3 mm long, and vessels can also grow into or wrap around a 625 µm tumor spheroid or a tumor tissue developed from a cell suspension. In summary, our study suggests that the interactions between a developing vasculature and a growing tumor must be controlled differently throughout the tissue development process, including at the early stage when vessels are still forming and at the later stage when the tumor needs to interact with the vessels.

Origin of outer tropical cyclone rainbands.

Outer tropical cyclone rainbands (TCRs) are a concentrated region of heavy precipitation and hazardous weather within tropical cyclones (TCs). Outer TCRs pose considerable risk to human societies, but their origin remains unresolved. Here, we identify a total of 1029 outer TCRs at their formative stage from 95 TCs and present a large collection of radar observations in order to establish a robust foundation of the natural diversity of rainband origin. The results show the dominance of outer origin for the observed outer TCRs, in distinct contrast to theoretical modeling works of outer TCRs, which propose inner-origin scenarios. Our analysis also suggests that squall-line dynamics are a common, but not the sole, mechanism responsible for outer TCR formation. The nature of preexisting outer precipitation is found to be an important factor to influence the squall-line and non-squall-line outer TCR initiation.

The Potential of Ultrasound Radiomics in Carpal Tunnel Syndrome Diagnosis: A Systematic Review and Meta-Analysis.

Background: Carpal tunnel syndrome (CTS) is the most common entrapment neuropathy for which ultrasound imaging has recently emerged as a valuable diagnostic tool. This meta-analysis aims to investigate the role of ultrasound radiomics in the diagnosis of CTS and compare it with other diagnostic approaches. Methods: We conducted a comprehensive search of electronic databases from inception to September 2023. The included studies were assessed for quality using the Quality Assessment Tool for Diagnostic Accuracy Studies. The primary outcome was the diagnostic performance of ultrasound radiomics compared to radiologist evaluation for diagnosing CTS. Results: Our meta-analysis included five observational studies comprising 840 participants. In the context of radiologist evaluation, the combined statistics for sensitivity, specificity, and diagnostic odds ratio were 0.78 (95% confidence interval (CI), 0.71 to 0.83), 0.72 (95% CI, 0.59 to 0.81), and 9 (95% CI, 5 to 15), respectively. In contrast, the ultrasound radiomics training mode yielded a combined sensitivity of 0.88 (95% CI, 0.85 to 0.91), a specificity of 0.88 (95% CI, 0.84 to 0.92), and a diagnostic odds ratio of 58 (95% CI, 38 to 87). Similarly, the ultrasound radiomics testing mode demonstrated an aggregated sensitivity of 0.85 (95% CI, 0.78 to 0.89), a specificity of 0.80 (95% CI, 0.73 to 0.85), and a diagnostic odds ratio of 22 (95% CI, 12 to 41). Conclusions: In contrast to assessments by radiologists, ultrasound radiomics exhibited superior diagnostic performance in detecting CTS. Furthermore, there was minimal variability in the diagnostic accuracy between the training and testing sets of ultrasound radiomics, highlighting its potential as a robust diagnostic tool in CTS.

Biophysical Electrical and Mechanical Stimulations for Promoting Chondrogenesis of Stem Cells on PEDOT:PSS Conductive Polymer Scaffolds.

The investigation of the effects of electrical and mechanical stimulations on chondrogenesis in tissue engineering scaffolds is essential for realizing successful cartilage repair and regeneration. The aim of articular cartilage tissue engineering is to enhance the function of damaged or diseased articular cartilage, which has limited regenerative capacity. Studies have shown that electrical stimulation (ES) promotes mesenchymal stem cell (MSC) chondrogenesis, while mechanical stimulation (MS) enhances the chondrogenic differentiation capacity of MSCs. Therefore, understanding the impact of these stimuli on chondrogenesis is crucial for researchers to develop more effective tissue engineering strategies for cartilage repair and regeneration. This study focuses on the preparation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) conductive polymer (CP) scaffolds using the freeze-drying method. The scaffolds were fabricated with varying concentrations (0, 1, 3, and 10 wt %) of (3-glycidyloxypropyl) trimethoxysilane (GOPS) as a crosslinker and an additive to tailor the scaffold properties. To gain a comprehensive understanding of the material characteristics and the phase aggregation phenomenon of PEDOT:PSS scaffolds, the researchers performed theoretical calculations of solubility parameters and surface energies of PSS, PSS-GOPS, and PEDOT polymers, as well as conducted material analyses. Additionally, the study investigated the potential of promoting chondrogenic differentiation of human adipose stem cells by applying external ES or MS on a PEDOT:PSS CP scaffold. Compared to the group without stimulation, the group that underwent stimulation exhibited significantly up-regulated expression levels of chondrogenic characteristic genes, such as SOX9 and COL2A1. Moreover, the immunofluorescence staining images exhibited a more vigorous fluorescence intensity of SOX9 and COL II proteins that was consistent with the trend of the gene expression results. In the MS experiment, the strain excitation exerted on the scaffold was simulated and transformed into stress. The simulated stress response showed that the peak gradually decreased with time and approached a constant value, with the negative value of stress representing the generation of tensile stress. This stress response quantification could aid researchers in determining specific MS conditions for various materials in tissue engineering, and the applied stress conditions could be further optimized. Overall, these findings are significant contributions to future research on cartilage repair and biophysical ES/MS in tissue engineering.

Deep learning algorithm for predicting subacromial motion trajectory: Dynamic shoulder ultrasound analysis.

Subacromial motion metrics can be extracted from dynamic shoulder ultrasonography, which is useful for identifying abnormal motion patterns in painful shoulders. However, frame-by-frame manual labeling of anatomical landmarks in ultrasound images is time consuming. The present study aims to investigate the feasibility of a deep learning algorithm for extracting subacromial motion metrics from dynamic ultrasonography. Dynamic ultrasound imaging was retrieved by asking 17 participants to perform cyclic shoulder abduction and adduction along the scapular plane, whereby the trajectory of the humeral greater tubercle (in relation to the lateral acromion) was depicted by the deep learning algorithm. Extraction of the subacromial motion metrics was conducted using a convolutional neural network (CNN) or a self-transfer learning-based (STL)-CNN with or without an autoencoder (AE). The mean absolute error (MAE) compared with the manually-labeled data (ground truth) served as the main outcome variable. Using eight-fold cross-validation, the average MAE was proven to be significantly higher in the group using CNN than in those using STL-CNN or STL-CNN+AE for the relative difference between the greater tubercle and lateral acromion on the horizontal axis. The MAE for the localization of the two aforementioned landmarks on the vertical axis also seemed to be enlarged in those using CNN compared with those using STL-CNN. In the testing dataset, the errors in relation to the ground truth for the minimal vertical acromiohumeral distance were 0.081-0.333 cm using CNN, compared with 0.002-0.007 cm using STL-CNN. We successfully demonstrated the feasibility of a deep learning algorithm for automatic detection of the greater tubercle and lateral acromion during dynamic shoulder ultrasonography. Our framework also demonstrated the capability of capturing the minimal vertical acromiohumeral distance, which is the most important indicator of subacromial motion metrics in daily clinical practice.

Application of deep learning algorithms in automatic sonographic localization and segmentation of the median nerve: A systematic review and meta-analysis.

OBJECTIVE: High-resolution ultrasound is an emerging tool for diagnosing carpal tunnel syndrome caused by the compression of the median nerve at the wrist. This systematic review and meta-analysis aimed to explore and summarize the performance of deep learning algorithms in the automatic sonographic assessment of the median nerve at the carpal tunnel level. METHODS: PubMed, Medline, Embase, and Web of Science were searched from the earliest records to May 2022 for studies investigating the utility of deep neural networks in the evaluation of the median nerve in carpal tunnel syndrome. The quality of the included studies was evaluated using the Quality Assessment Tool for Diagnostic Accuracy Studies. The outcome variables included precision, recall, accuracy, F-score, and Dice coefficient. RESULTS: In total, seven articles were included, comprising 373 participants. The deep learning and related algorithms comprised U-Net, phase-based probabilistic active contour, MaskTrack, ConvLSTM, DeepNerve, DeepSL, ResNet, Feature Pyramid Network, DeepLab, Mask R-CNN, region proposal network, and ROI Align. The pooled values of precision and recall were 0.917 (95 % confidence interval [CI], 0.873-0.961) and 0.940 (95 % CI, 0.892-0.988), respectively. The pooled accuracy and Dice coefficient were 0.924 (95 % CI, 0.840-1.008) and 0.898 (95 % CI, 0.872-0.923), respectively, whereas the summarized F-score was 0.904 (95 % CI, 0.871-0.937). CONCLUSION: The deep learning algorithm enables automated localization and segmentation of the median nerve at the carpal tunnel level in ultrasound imaging with acceptable accuracy and precision. Future research is expected to validate the performance of deep learning algorithms in detecting and segmenting the median nerve along its entire length as well as across datasets obtained from various ultrasound manufacturers.

Subacromial Motion Metrics in Painful Shoulder Impingement: A Dynamic Quantitative Ultrasonography Analysis.

OBJECTIVES: To explore the subacromial motion metrics in patients with and without subacromial impingement syndrome (SIS) and to investigate whether the abnormality was associated with rotator cuff pathologies. DESIGN: This cross-sectional observational study used dynamic quantitative ultrasonography imaging for shoulder joint assessment. SETTING: Outpatient rehabilitation clinic. PARTICIPANTS: Individuals with SIS on at least 1 shoulder (n=32) and asymptomatic controls (n=32) (N=64). INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Frame-by-frame, the humeral greater tuberosity against the lateral edge of the acromion was traced to obtain the minimal vertical acromiohumeral distance (AHD). The rotation angle and radius of the humerus were computed using the least-squares curve fitting method. RESULTS: Approximately two-thirds of the shoulders with SIS did not have any sonographically identifiable rotator cuff pathologies. There was a consistent trend of nonsignificantly increased humeral rotation angles in painful shoulders. The generalized estimating equation demonstrated that the decreased minimal vertical AHD was associated with painful subacromial impingement (ß coefficient: -0.123cm, 95% confidence interval [CI], -0.199 to -0.047). The area under the curve for the minimal vertical AHD to discriminate painful or impinged shoulders ranged from 0.624-0.676. The increased rotation angle (ß coefficient: 10.516°; 95% CI, 3.103-17.929) and decreased rotation radius (ß coefficient: -2.903cm; 95% CI, -5.693 to -0.111) were shown to be significantly related to the presence of supraspinatus tendinopathy. CONCLUSIONS: Shoulders with SIS were characterized by a decreased minimal vertical AHD during dynamic examination. Abnormal subacromial metrics can develop in patients with mild (or no) rotator cuff pathologies. More prospective cohort studies are warranted to investigate the changes in subacromial motion metrics in populations at risk for painful or impinged shoulders.

Treatment Effect of Platelet Gel on Reconstructing Bone Defects and Nonunions: A Review of In Vivo Human Studies.

In ideal circumstances, a fractured bone can heal properly by itself or with the aid of clinical interventions. However, around 5% to 10% of bone fractures fail to heal properly within the expected time even with the aid of clinical interventions, resulting in nonunions. Platelet gel is a blood-derived biomaterial used in regenerative medicine aiming to promote wound healing and regeneration of damaged tissues. The purpose of this paper is to review relevant articles in an attempt to explore the current consensus on the treatment effect of platelet gel on reconstructing bone defects and nonunions, hoping to provide a valuable reference for clinicians to make treatment decisions in clinical practice. Based on the present review, most of the studies applied the combination of platelet gel and bone graft to reconstruct bone defects and nonunions, and most of the results were positive, suggesting that this treatment strategy could promote successful reconstruction of bone defects and nonunions. Only two studies tried to apply platelet gel alone to reconstruct bone defects and nonunions, therefore a convincing conclusion could not be made yet regarding the treatment effect of platelet gel alone on reconstructing bone defects and nonunions. Only one study applied platelet gel combined with extracorporeal shock wave therapy to reconstruct nonunions, and the results were positive; the hypothetical mechanism of this treatment strategy is reasonable and sound, and more future clinical studies are encouraged to further justify the effectiveness of this promising treatment strategy. In conclusion, the application of platelet gel could be a promising and useful treatment method for reconstructing bone defects and nonunions, and more future clinical studies are encouraged to further investigate the effectiveness of this promising treatment method.

Constitutive Equations for Analyzing Stress Relaxation and Creep of Viscoelastic Materials Based on Standard Linear Solid Model Derived with Finite Loading Rate.

The viscoelastic properties of materials such as polymers can be quantitatively evaluated by measuring and analyzing the viscoelastic behaviors such as stress relaxation and creep. The standard linear solid model is a classical and commonly used mathematical model for analyzing stress relaxation and creep behaviors. Traditionally, the constitutive equations for analyzing stress relaxation and creep behaviors based on the standard linear solid model are derived using the assumption that the loading is a step function, implying that the loading rate used in the loading process of stress relaxation and creep tests is infinite. Using such constitutive equations may cause significant errors in analyses since the loading rate must be finite (no matter how fast it is) in a real stress relaxation or creep experiment. The purpose of this paper is to introduce the constitutive equations for analyzing stress relaxation and creep behaviors based on the standard linear solid model derived with a finite loading rate. The finite element computational simulation results demonstrate that the constitutive equations derived with a finite loading rate can produce accurate results in the evaluation of all viscoelastic parameters regardless of the loading rate in most cases. It is recommended that the constitutive equations derived with a finite loading rate should replace the traditional ones derived with an infinite loading rate to analyze stress relaxation and creep behaviors for quantitatively evaluating the viscoelastic properties of materials.

Biomechanical Effects of Plastic Heel Cup on Plantar Fasciitis Patients Evaluated by Ultrasound Shear Wave Elastography.

The plastic heel cup has been adopted to treat plantar heel problems for years. However, its mechanisms and biomechanical effects are yet to be fully understood. The purpose of this study was to investigate the effects of the plastic heel cup on the microchamber and macrochamber layers of the heel pad by comparing the stiffness (in terms of the shear wave speed) and thickness of these two layers with and without a plastic heel cup during static standing. Fifteen patients with unilateral plantar fasciitis were recruited. The shear wave speed and thickness of the microchamber and microchamber layers of each symptomatic heel pad during standing measured by ultrasound shear wave elastography were compared between conditions with and without a plastic heel cup. It was found that a plastic heel cup reduced the shear wave speed of the microchamber layer to 55.5% and increased its thickness to 137.5% compared with the condition without a plastic heel cup. For the microchamber layer, the shear wave speed was reduced to 89.7%, and thickness was increased to 113.6% compared with the condition without a plastic heel cup. The findings demonstrate that a plastic heel cup can help to reduce the stiffness and increase the thickness for both layers of the heel pad during standing, suggesting that the mechanism of a plastic heel cup, and its resulting biomechanical effect, is to reduce the internal stress of the heel pad by increasing its thickness through confinement.

Quantitative Analysis of Dynamic Subacromial Ultrasonography: Reliability and Influencing Factors.

Objective: Current imaging methods used to examine patients with subacromial impingement syndrome (SIS) are limited by their semi-quantitative nature and their capability of capturing dynamic movements. This study aimed to develop a quantitative analytic model to assess subacromial motions using dynamic ultrasound and to examine their reliability and potential influencing factors. Method: We included 48 healthy volunteers and examined their subacromial motions with dynamic ultrasound imaging. The parameters were the minimal vertical acromiohumeral distance, rotation radius, and degrees of the humeral head. The generalized estimating equation (GEE) was used to investigate the impact of different shoulder laterality, postures, and motion phases on the outcome. Result: Using the data of the minimal vertical acromiohumeral distance, the intra-rater and inter-rater reliabilities (intra-class correlation coefficient) were determined as 0.94 and 0.88, respectively. In the GEE analysis, a decrease in the minimal vertical acromiohumeral distance was associated with the abduction phase and full-can posture, with a beta coefficient of -0.02 cm [95% confidence interval (CI), -0.03 to -0.01] and -0.07 cm (95% CI, -0.11 to -0.02), respectively. The abduction phase led to a decrease in the radius of humeral rotation and an increase in the angle of humeral rotation, with a beta coefficient of -1.28 cm (95% CI, -2.16 to -0.40) and 6.60° (95% CI, 3.54-9.67), respectively. A significant negative correlation was observed between the rotation angle and radius of the humeral head and between the rotation angle and the minimal vertical acromiohumeral distance. Conclusion: Quantitative analysis of dynamic ultrasound imaging enables the delineation of subacromial motion with good reliability. The vertical acromiohumeral distance is the lowest in the abduction phase and full-can posture, and the rotation angle of the humeral head has the potential to serve as a new parameter for the evaluation of SIS.

Rational design of a highly porous electronic scaffold with concurrent enhancement in cell behaviors and differentiation under electrical stimulation.

Conductive polymers (CPs) have received increasing attention as promising materials for studying electrophysiological signals in cell and tissue engineering. The combination of CPs with electrical stimulation (ES) could possibly enhance neurogenesis, osteogenesis, and myogenesis. To date, research has been prioritized on capitalizing CPs as two-dimensional (2D) structures for guiding the differentiation. In contrast, relatively little is conducted on the implementation of 3D conductive scaffolds. In this research, we report the synergic assembly of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and multi-walled carbon nanotubes (MWCNTs) as a biocompatible, electrically conductive, mechanically robust and structurally porous 3D scaffold. To showcase the bioelectronic utilization, a proof-of-concept demonstration of electrically stimulated cell culture under ES is conducted. The ES effects coupled with the 3D scaffold are promising on pheochromocytoma 12 (PC12), a neuronal cell line, and the ES effect on osteogenesis of human adipose-derived stem cells (hASC) was further studied. PC12 cultured on this PEDOT:PSS/MWCNT 3D scaffolds was induced to differentiate toward a more mature neuronal phenotype with the ES treatment. Furthermore, hASC osteogenesis could be highly promoted in this conductive scaffold with ES. Calcium deposition concentration and osteo-differentiated gene markers were significantly higher with ES. The facile assembly of 3D conductive scaffolds sheds light on both platforms for investigating the 3D microenvironment for electrophysiological simulation of cells and tissues under the ES treatment of in vivo tissue engineering.

Mechanical Properties of Compact Bone Defined by the Stress-Strain Curve Measured Using Uniaxial Tensile Test: A Concise Review and Practical Guide.

Mechanical properties are crucial parameters for scaffold design for bone tissue engineering; therefore, it is important to understand the definitions of the mechanical properties of bones and relevant analysis methods, such that tissue engineers can use this information to properly design the mechanical properties of scaffolds for bone tissue engineering. The main purpose of this article is to provide a review and practical guide to understand and analyze the mechanical properties of compact bone that can be defined and extracted from the stress-strain curve measured using uniaxial tensile test until failure. The typical stress-strain curve of compact bone measured using uniaxial tensile test until failure is a bilinear, monotonically increasing curve. The associated mechanical properties can be obtained by analyzing this bilinear stress-strain curve. In this article, a computer programming code for analyzing the bilinear stress-strain curve of compact bone for quantifying the associated mechanical properties is provided, such that the readers can use this computer code to perform the analysis directly. In addition to being applied to compact bone, the information provided by this article can also be applied to quantify the mechanical properties of any material having a bilinear stress-strain curve, such as a whole bone, some metals and biomaterials. The information provided by this article can be applied by tissue engineers, such that they can have a reference to properly design the mechanical properties of scaffolds for bone tissue engineering. The information can also be applied by researchers in biomechanics and orthopedics to compare the mechanical properties of bones in different physiological or pathological conditions.

Effects of Loading and Boundary Conditions on the Performance of Ultrasound Compressional Viscoelastography: A Computational Simulation Study to Guide Experimental Design.

Most biomaterials and tissues are viscoelastic; thus, evaluating viscoelastic properties is important for numerous biomedical applications. Compressional viscoelastography is an ultrasound imaging technique used for measuring the viscoelastic properties of biomaterials and tissues. It analyzes the creep behavior of a material under an external mechanical compression. The aim of this study is to use finite element analysis to investigate how loading conditions (the distribution of the applied compressional pressure on the surface of the sample) and boundary conditions (the fixation method used to stabilize the sample) can affect the measurement accuracy of compressional viscoelastography. The results show that loading and boundary conditions in computational simulations of compressional viscoelastography can severely affect the measurement accuracy of the viscoelastic properties of materials. The measurement can only be accurate if the compressional pressure is exerted on the entire top surface of the sample, as well as if the bottom of the sample is fixed only along the vertical direction. These findings imply that, in an experimental validation study, the phantom design should take into account that the surface area of the pressure plate must be equal to or larger than that of the top surface of the sample, and the sample should be placed directly on the testing platform without any fixation (such as a sample container). The findings indicate that when applying compressional viscoelastography to real tissues in vivo, consideration should be given to the representative loading and boundary conditions. The findings of the present simulation study will provide a reference for experimental phantom designs regarding loading and boundary conditions, as well as guidance towards validating the experimental results of compressional viscoelastography.

Ramp-Creep Ultrasound Viscoelastography for Measuring Viscoelastic Parameters of Materials.

Several ultrasound-based methods have been developed to evaluate the viscoelastic properties of materials. The purpose of this study is to introduce a novel viscoelastography method based on ultrasound acoustic radiation force for measuring the parameters relevant to the viscoelastic properties of materials, named ramp-creep ultrasound viscoelastography (RC viscoelastography). RC viscoelastography uses two different ultrasound excitation modes to cause ramp and creep strain responses in the material. By combining and analyzing the information obtained from these two modes of excitation, the viscoelastic parameters of the material can be quantitatively evaluated. Finite element computer simulation demonstrated that RC viscoelastography can accurately evaluate the viscoelastic parameters of the material, including the relaxation and creep time constants as well as the ratio of viscous fluids to solids in the material, except for the region near the top surface of the material. The novelty of RC viscoelastography is that there is no need to know the magnitude of acoustic radiation force and induced stress in the material in order to evaluate the viscoelastic parameters. In the future, experiments are necessary to test the performance of RC viscoelastography in real biomaterials and biological tissues.

Change of Eyelid Parameters in Patients With Marin-Amat Syndrome.

PURPOSE: Marin-Amat syndrome is an acquired facial synkinesis manifesting as involuntary eyelid closure on jaw movement. The authors investigate the clinical features, especially the quantitative changes in eyelid parameters of patients with Marin-Amat syndrome. METHODS: Patients with Marin-Amat syndrome between 2015 and 2017 in a medical center were collected. Clinical features and the change of eyelid parameters, including margin reflex distance 1 (MRD-1), margin reflex distance 2 (MRD-2), and palpebral fissure height, were evaluated. RESULTS: There were 5 men and 3 women with a mean age of 76 years. All had a history of facial palsy. The mean time to onset of Marin-Amat syndrome was 4.4 years after facial palsy. Seven patients (87.5%) developed subsequent ipsilateral facial spasm after facial palsy. Most patient complaints were ptosis (62.5%) and ptosis on eating (37.5%). The mean palpebral fissure height of involved eyes decreased from 5.88 to 2 mm on jaw opening (p = 0.011), which resulted from decrease in MRD-1 (from 2.06 to 0.06 mm, p = 0.012) and MRD-2 (from 3.81 to 1.94 mm; p = 0.012). Botulinum toxin A (Botox) injection into the periorbital orbicularis muscle in 6 patients significantly relieved the change of palpebral fissure height on jaw opening compared with that before injection (9.9% vs. 68.6 %, p = 0.027). CONCLUSIONS: Most patients with Marin-Amat syndrome present with ptosis and might be overlooked or underestimated. The reduction in palpebral fissure height in our patients with Marin-Amat syndrome was due to involuntary orbicularis oculi muscle contraction, resulting in decrease of both the MRD-1 and MRD-2 on jaw opening.

Publisher Correction: The degree of prevalence of similarity between outer tropical cyclone rainbands and squall lines.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.