Exploring the hidden environmental pollution of microplastics derived from bioplastics: A review.

Bioplastics might be an ecofriendly alternative to traditional plastics. However, recent studies have emphasized that even bioplastics can end up becoming micro- and nano-plastics due to their degradation under ambient environmental conditions. Hence, there is an urgent need to assess the hidden environmental pollution caused by bioplastics. However, little is known about the evolutionary trends of bibliographic data, degradation pathways, formation, and toxicity of micro- and nano-scaled bioplastics originating from biodegradable polymers such as polylactic acid, polyhydroxyalkanoates, and starch-based plastics. Therefore, the prime objective of the current review was to investigate evolutionary trends and the latest advancements in the field of micro-bioplastic pollution. Additionally, it aims to confront the limitations of existing research on microplastic pollution derived from the degradation of bioplastic wastes, and to understand what is needed in future research. The literature survey revealed that research focusing on micro- and nano-bioplastics has begun since 2012. This review identifies novel insights into microbioplastics formation through diverse degradation pathways, including photo-oxidation, ozone-induced degradation, mechanochemical degradation, biodegradation, thermal, and catalytic degradation. Critical research gaps are identified, including defining optimal environmental conditions for complete degradation of diverse bioplastics, exploring micro- and nano-bioplastics formation in natural environments, investigating the global occurrence and distribution of these particles in diverse ecosystems, assessing toxic substances released during bioplastics degradation, and bridging the disparity between laboratory studies and real-world applications. By identifying new trends and knowledge gaps, this study lays the groundwork for future investigations and sustainable solutions in the realm of sustainable management of bioplastic wastes.

Trends in research on characterization, treatment and valorization of hazardous red mud: A systematic review.

Meta-analysis of red mud-related literature in English published from 1976 to 2022 and in Chinese from 1990 to 2022 was performed to support critical analysis and evaluation of the available literature based on the following aspects of red mud research: (a) characterization, (b) treatment for harmfulness minimization, (c) recovery of valuable metals, (d) environmental applications, and (e) uses as construction materials. It was found that (a) sinter red mud tended to contain more silica and calcium, and less iron, sodium and aluminium compared to Bayer red mud; (b) gypsum was the most frequently used agent for harmfulness reduction treatment of red mud, followed by flue gas/CO2; (c) the mean optimal pH for adsorption of major anionic pollutants was 8.42 ± 1.13 (arsenite), 3.73 ± 0.68 (arsenate), 3.50 ± 2.38 (phosphate), 4.43 ± 1.04 (fluoride) and 3.80 ± 1.54 (chromate); (d) wastewater treatment has attracted more attention compared to contaminated soils and waste gases; (e) recovery of iron and scandium has attracted more attention compared to other metals; (f) cement making has been the focus in construction uses. Most of the research findings were based on laboratory-scale experiments that focused on efficacy rather than efficiency. There was a lack of integrated approaches for research in red mud valorization.

Industrial waste-based adsorbents as a new trend for removal of water-borne emerging contaminants.

Emerging contaminants in wastewater are one of the growing concerns because of their adverse effects on human health and ecosystems. Adsorption technology offers superior performance due to its cost-effectiveness, stability, recyclability, and reliability in maintaining environmental and health standards for toxic pollutants. Despite extensive research on the use of traditional adsorbents to remove emerging contaminants, their expensiveness, lack of selectivity, and complexity of regeneration remain some of the challenges. Industrial wastes viz. blast furnace slag, red mud, and copper slag can be used to develop efficacious adsorbents for the treatment of emerging contaminants in water. Advantages of the use of such industrial wastes include resource utilization, availability, cost-effectiveness, and waste management. Nevertheless, little is known so far about their application, removal efficacy, adsorption mechanisms, and limitations in the treatment of emerging contaminants. A holistic understanding of the application of such unique industrial waste-derived adsorbents in removing emerging contaminants from water is need of the hour to transform this technology from bench-scale to pilot and large-scale applications. This review investigates different water treatment techniques associated with industrial waste-based adsorbents derived from blast furnace slag, red mud, and copper slag. Besides, this review provides important insights into the growing trends of utilizing such novel types of adsorbents to remove emerging contaminants from water with an emphasis on removal efficacy, controlling measures, adsorption mechanisms, advantages, and limitations. The present timely review brings the current state of knowledge into a single reference which could be a strong platform for future research in understanding the latest advancements, decision making, and financial management related to the treatment of wastewater using industrial waste-based adsorbents.

Assessing Microalgal Protein's Impact on Environment and Energy Footprint via Life Cycle Analysis.

Conventionally, increasing the yield of microalgal biomass has been the primary focus of research, while the significant protein reserve within this biomass has remained largely unexplored. This protein reserve possesses substantial value and versatility, offering a wide range of prospective applications and presenting an enticing chance for innovation and value enhancement for various sectors. Current study employed an innovative research approach that focused solely on the LCA of protein production potential from microalgal biomass, a lesser-explored aspects within this domain. Most environmental impact categories were shown to be significantly affected by cultivation phase because of the electrical obligation, followed by the harvesting and protein extraction phase. Still, the environmental aspect was seen to yield a minimal impact on global warming potential, i.e., 4 × 10-3 kg CO2, underscoring the ecologically favorable nature of the process. Conversely, the overall energy impact was seen to intensify with NEB of - 39.33 MJ and NER of 0.49, drawing attention to the importance of addressing the energy aspect to harness the full potential of microalgal protein production.

Contribution of free hydroxyl radical to the formation of micro(nano)plastics and release of additives during polyethylene degradation in water.

The omnipresence of secondary microplastics (MPs) in aquatic ecosystems has become an increasingly alarming public health concern. Hydrogen peroxide (H2O2) is an important oxidant in nature and the most stable reactive oxygen species occurred in natural water. In order to explore the contribution of free ˙OH generated from H2O2-driven Fenton-like reactions on the degradation of polyethylene (PE) and generation of micro- and nano-scale plastics in water, a batch experiment was conducted over a period of 620 days in water treated with micromolar H2O2. The incorporation of H2O2 in water induced the formation of flake-like micro(nano)-sized particles due to intensified oxidative degradation of PE films. The presence of ˙OH significantly enhanced the generation of both micro- and nano-scale plastics exhibiting a higher proportion of particles in the range of 200-500 nm compared to the Control. Total organic carbon in the H2O2 treated solution was nearly 174-fold higher than that of the Control indicating a substantial liberation of organic compounds due to the oxidative degradation of native carbon chain of PE and subsequent decomposition of its additives. The highly toxic butylated hydroxytoluene detected from the gas chromatography-mass spectrometry (GC-MS) analysis implied the toxicological behavior of secondary micro(nano)plastics influenced by the oxidation and decomposition processes The findings from this study further expand our understanding of the role of ˙OH in degrading PE micro-scale plastics into nanoparticles as an implication of naturally occurring H2O2 in aquatic environments. In the future, further attention should be drawn to the underlying mechanisms of H2O2-driven in-situ Fenton reaction mediated by natural environmental conditions targeting the alternation of light and darkness on the oxidative degradation of plastics.

A review on constructive classification framework of research trends in analytical instrumentation for secondary micro(nano)plastics: What is new and what needs next?

Secondary micro(nano)plastics generated from the degradation of plastics pose a major threat to environmental and human health. Amid the growing research on microplastics to date, the detection of secondary micro(nano)plastics is hampered by inadequate analytical instrumentation in terms of accuracy, validation, and repeatability. Given that, the current review provides a critical evaluation of the research trends in instrumental methods developed so far for the qualitative and quantitative determination of micro(nano)plastics with an emphasis on the evolution, new trends, missing links, and future directions. We conducted a meta-analysis of the growing literature surveying over 800 journal articles published from 2004 to 2022 based on the Web of Science database. The significance of this review is associated with the proposed novel classification framework to identify three main research trends, viz. (i) preliminary investigations, (ii) current progression, and (iii) novel advances in sampling, characterization, and quantification targeting both micro- and nano-sized plastics. Field Flow Fractionation (FFF) and Hydrodynamic Chromatography (HDC) were found to be the latest techniques for sampling and extraction of microplastics. Fluorescent Molecular Rotor (FMR) and Thermal Desorption-Proton Transfer Reaction-Mass Spectrometry (TD-PTR-MS) were recognized as the modern developments in the identification and quantification of polymer units in micro(nano)plastics. Powerful imaging techniques, viz. Digital Holographic Imaging (DHI) and Fluorescence Lifetime Imaging Microscopy (FLIM) offered nanoscale analysis of the surface topography of nanoplastics. Machine learning provided fast and less labor-intensive analytical protocols for accurate classification of plastic types in environmental samples. Although the existing analytical methods are justifiable merely for microplastics, they are not fully standardized for nanoplastics. Future research needs to be more inclined towards secondary nanoplastics for their effective and selective analysis targeting a broad range of environmental and biological matrices.

Rainwater input reduces greenhouse gas emission and arsenic uptake in paddy rice systems.

This work aimed to test the hypothesis that rainwater-borne hydrogen peroxide (H2O2) can affect arsenic uptake by rice plants and emission of greenhouse gases in paddy rice systems. A mesocosm rice plant growth experiment, in conjunction with rainwater monitoring, was conducted to examine the effects of rainwater input on functional groups of soil microorganisms related to transformation of arsenic, carbon and nitrogen as well as various arsenic species in the soil and plant systems. The fluxes of methane (CH4), nitrous oxide (N2O) and carbon dioxide (CO2) were measured during selected rainfall events. The results showed that rainwater-borne H2O2 effectively reacted with Fe2+ present in paddy soil to trigger a Fenton-like reaction to produce •OH. Both H2O2 and •OH inhibited As(V)-reducing microbes but promoted As(III)-oxidizing microbes, leading to a net increase in arsenate-As that is less phytoavailable compared to arsenite-As. This impeded uptake of soil-borne As by the rice plant roots, and consequently reduced the accumulation of As in the rice grains. The input of H2O2 into the soil caused more inhibition to methanogens than to methane-oxidizing microbes, resulting in a reduction in CH4 flux. The microbes mediating the transformation of inorganic nitrogen were also under oxidative stresses upon exposure to the rainwater-derived H2O2. And the limited conversion of NO3- to NO played a crucial role in reducing N2O emission from the paddy soils. The results also indicated that the rainwater-borne H2O2 could significantly affect other biogeochemical processes that shape the wider ecosystems, which is worth further investigations.

Kinetic model derived from machine learning for accurate prediction of microalgal hydrogen production via conversion from low thermally pre-treated palm kernel expeller waste.

The depletion of fossil fuel sources and increase in energy demands have increased the need for a sustainable alternative energy source. The ability to produce hydrogen from microalgae is generating a lot of attention in both academia and industry. Due to complex production procedures, the commercial production of microalgal biohydrogen is not yet practical. Developing the most optimum microalgal hydrogen production process is also very laborious and expensive as proven from the experimental measurement. Therefore, this research project intended to analyse the random time series dataset collected during microalgal hydrogen productions while using various low thermally pre-treated palm kernel expeller (PKE) waste via machine learning (ML) approach. The analysis of collected dataset allowed the derivation of an enhanced kinetic model based on the Gompertz model amidst the dark fermentative hydrogen production that integrated thermal pre-treatment duration as a function within the model. The optimum microalgal hydrogen production attained with the enhanced kinetic model was 387.1 mL/g microalgae after 6 days with 1 h thermally pre-treated PKE waste at 90 °C. The enhanced model also had better accuracy (R2 = 0.9556) and net energy ratio (NER) value (0.71) than previous studies. Finally, the NER could be further improved to 0.91 when the microalgal culture was reused, heralding the potential application of ML in optimizing the microalgal hydrogen production process.

Strategies for cost-effective remediation of widespread oil-contaminated soils in Kuwait, an environmental legacy of the first Gulf War.

The Kuwaiti oil fire during the first Gulf War resulted in the formation of approximately 300 "oil lakes" of varying sizes that covered over 110 km2 of the desert land. This threatens the fragile desert ecosystems and human health. Following the award of over US$2 billion to the State of Kuwait by the United Nations, large-scale remediation of the oil-contaminated soils has now been on the agenda. However, how to implement the remediation program in a cost-effective way represents a major challenge. In this study, cost-effective remediation strategies were developed based on field and laboratory investigations in a typical oil lake area. Overall, most of the lighter petroleum hydrocarbons (PHCs) were lost due to evaporation. Long-chain aliphatic PHCs dominated the PHCs in the investigated oil lake area. This has implications for developing remediation strategies. Toxicity assessment results showed that the majority of soils pose a low environmental risk with a hazard index <1. Therefore, intensive treatment of these PHCs may not be necessary for these soils. Although active treatment methods are needed to remove the contaminants as soon as practical for the relatively small areas of high contamination, more cost-effective passive methods should be considered to minimize the remedial costs for the larger area of the non-hotspot areas. Given the extremely low risk in terms of groundwater contamination by the contaminated soils, it may not be necessary to remove the soils from the contaminated sites. A low-cost capping method should be sufficient to minimize human exposure to the PHC-contaminated soils.

Life cycle assessment: Sustainability of biodiesel production from black soldier fly larvae feeding on thermally pre-treated sewage sludge under a tropical country setting.

More energy is needed nowadays due to global population growth. Concurrently, sewage sludge generation has also increased steadily stemming from the inevitable urbanization. As such, black soldier fly larvae (BSFL) can be potentially deployed to solve both issues. This paper investigates the environmental sustainability of biodiesel production derived from sludge-fed BSFL feedstock. A cradle-to-gate life cycle assessment (LCA) was performed through SimaPro software utilizing the ReCiPe 2016 Midpoint (H) and Endpoint (H) methods. The entire LCA covered 3 main stages, including the thermal pre-treatment of sludge, BSFL rearing and processing, and lastly lipid extraction and biodiesel production. LCA showed that the sludge pre-treatment stage had the highest environmental impact, while BSFL rearing and processing had the least due to the suitable geographical climate. Electricity usage during the pre-treatment stage was the main contributing component, followed by chemical usage during biodiesel production. After normalizing, it was observed that land occupation, marine ecotoxicity, freshwater ecotoxicity and freshwater eutrophication were more impactful than the commonly studied global warming potential (GWP). Lipid content and biodiesel conversion efficiency were determined as the sensitive factors which could influence the LCA outcome. In comparison with other types of biodiesel, BSFL biodiesel had a milder impact in terms of climate change, land occupation, terrestrial acidification, marine and freshwater eutrophication. Furthermore, this biological reduction of sludge through BSFL valorization avoided sludge landfilling, which reduced up to 100 times GWP. Therefore, sludge-fed BSFL biodiesel production is an environmentally-sound and highly potential solution that should be investigated comprehensively.

Factors affecting N2O fluxes from heavy metal-contaminated mangrove soils in a subtropical estuary.

A 1-year field monitoring program was carried out to observe seasonal variation in N2O fluxes at two typical mangrove wetlands in a subtropical estuary. The soils in the island-type mangrove wetland had a higher level of heavy metal(loid) contamination and a lower level of salinity compared to the small bay-type mangrove wetland. While there was a high level of similarity in the seasonal variation pattern of N2O fluxes between the two investigated sites with both being significantly higher in summer than in other seasons, the average of N2O fluxes in the island-type mangrove wetland was 7.19 µg·m-2·h-1， which tended to be lower compared to the small bay-type mangrove wetland (15.63 µg·m-2·h-1). Overall, N2O flux was closely related to soil-borne heavy metal(loid)s, showing a trend to decrease with increasing concentration of these heavy metal(loid)s. The N2O fluxes increased with decreasing abundance of either denitrifiers or nitrifiers. But the opposite was observed for the anammox bacteria present in the soils. The anammox bacteria were more sensitive to heavy metal(loid) stress but more tolerated high salinity encountered in the investigated soils compared to the denitrifiers or nitrifiers. It appears that anammox reactions mediated by anammox bacteria played a key role in affecting the spatial variation in N2O fluxes from the mangrove soils in the study area. And an increased level of ammonium in soils tended to promote the activity of anammox bacteria and consequently enhanced N2O emission from the mangrove soils.

Optimizing carbon emission forecast for modelling China's 2030 provincial carbon emission quota allocation.

Rational allocation of carbon quotas is the fundamental premise for the orderly operation of carbon markets. To achieve the set target of carbon peak by 2030, there is an urgent need to establish China's 2030 provincial carbon quota allocation scheme. Although some proposed schemes have been formulated, there are problems with the methods used for carbon emission forecasting and evaluating the rationality of a proposed allocation scheme. This study aimed to optimize carbon emission forecast by incorporating terrestrial carbon sinks into the mechanism for building China's 2030 provincial carbon emission quota allocation schemes. Aquila Optimizer's Double Support Vector Regression (AO-based TWSVR) that has the advantages in solving problems associated with small sample size, nonlinear and high-dimensional pattern recognition with fast training speed and insensitivity to noise was adopted to predict the net carbon emission. The results show that the application of AO-based TWSVR model allows satisfactory forecast of the net carbon emission in China for the period from 2021 to 2035. This allowed terrestrial carbon sequestration being incorporated into the mechanism to formulate China's 2030 provincial carbon quota allocation schemes. Comparison of the three provincial carbon quota allocation schemes using social network analysis suggests that the equity-based carbon quota allocation scheme is more suitable for China's national conditions compared to the efficiency-based scheme and the combined principle-based scheme. The findings obtained from this study have implications for optimizing the scheme of China's 2030 provincial carbon quota allocation.

Trend in Research on Characterization, Environmental Impacts and Treatment of Oily Sludge: A Systematic Review.

Oily sludge is a hazardous material generated from the petroleum industry that has attracted increasing research interest. Although several review articles have dealt with specific subtopics focusing on the treatment of oily sludge based on selected references, no attempt has been made to demonstrate the research trend of oily sludge comprehensively and quantitatively. This study conducted a systematic review to analyze and evaluate all oily sludge-related journal articles retrieved from the Web of Science database. The results show that an increase in oily sludge-related research did not take place until recent years and the distribution of the researchers is geographically out of balance. Most oily sludge-related articles focused on treatment for harmfulness reduction or valorization with limited coverage of formation, characterization, and environmental impact assessment of oily sludge. Pyrolytic treatment has attracted increasing research attention in recent years. So far, the research findings have been largely based on laboratory-scale experiments with insufficient consideration of the cost-effectiveness of the proposed treatment methods. Although many methods have been proposed, few alone could satisfactorily achieve cost-effective treatment goals. To enable sustainable management of oily sludge on a global scale, efforts need to be made to fund more research projects, especially in the major oil-producing countries. Pilot-scale experiments using readily available and affordable materials should be encouraged for practical purposes. This will allow a sensible cost-benefit analysis of a proposed method/procedure for oily sludge treatment. To improve the treatment performance, combined methods are more desirable. To inform the smart selection of methods for the treatment of different oily sludge types, it is suggested to develop universally accepted evaluation systems for characterization and environmental risk of oily sludge.

Behaviors of Organic Ligands and Phosphate during Biochar-Driven Nitrate Adsorption in the Presence of Low-Molecular-Weight Organic Acids.

A batch experiment was conducted to examine the behavior of nitrate, organic ligands, and phosphate in the co-presence of biochar and three common low-molecular-weight organic acids (LMWOAs). The results show that citrate, oxalate, and malate ions competed with nitrate ion for the available adsorption sites on the biochar surfaces. The removal rate of LMWOA ligands by the biochar via adsorption grew with increasing solution pH. The adsorbed divalent organic ligands created negatively charged sites to allow binding of cationic metal nitrate complexes. A higher degree of biochar surface protonation does not necessarily enhance nitrate adsorption. More acidic conditions formed under a higher dose of LMWOAs tended to make organic ligands predominantly in monovalent forms and failed to create negatively charged sites to bind cationic metal nitrate complexes. This could adversely affect nitrate removal efficiency in the investigated systems. LMWOAs caused significant release of phosphate from the biochar. The phosphate in the malic acid treatment tended to decrease over time, while the opposite was observed in the citric- and oxalic-acid treatments. This was caused by re-immobilization of phosphate in the former due to the marked increase in solution pH over time.

Biochar Is Not Durable for Remediation of Heavy Metal-Contaminated Soils Affected by Acid-Mine Drainage.

Biochar is a soil conditioner for enhancing plant growth and reducing plants' uptake of heavy metals. However, the protonation of biochar surfaces in acid soils can weaken the capacity of biochar to reduce the phytoavailability of soil-borne heavy metals over time. The aim of this study was to test this hypothesis by performing a plant-growth experiment with five harvest cycles to examine the durability of rice-straw biochar for the remediation of an acidic-mine-water-contaminated soil. The application of the biochar significantly reduced the phytoavailability of the heavy metals and inhibited the plant uptake of cationic heavy metals but not anionic Cr. The beneficial effects of the biochar were weakened with the increasing number of harvest cycles caused by the gradual protonation of the biochar surfaces, which resulted in the desorption of the adsorbed heavy metals. The weakening capacity of the biochar to reduce the heavy-metal uptake by the vegetable plants was more evident for Cu, Zn, and Pb compared to Ni and Cd. The experimental results generally confirmed the hypothesis. It was also observed that the bioaccessible amount of various metals in the edible portion of the vegetable was also reduced as a result of the biochar application.

Red mud-biochar composites (co-pyrolyzed red mud-plant materials): Characteristics and improved efficacy on the treatment of acidic mine water and trace element-contaminated soils.

The use of commercially sourced dopants for synthesizing biochar-based composites could be economically undesirable. The current work aimed to explore the possibility of making low-cost biochar-based composites using red mud (an industrial waste from alumina production) as dopants. Two types of red mud were used: one from a Bayer process and another from a sintering process. Different techniques (wet chemical, magnetic, SEM-EDS, FTIR, XPS and XRD analyses) were adopted to characterize the synthesized red mud-biochar composites, along with the pristine biochar. The composites were superior to the pristine biochar in terms of acid neutralizing capacity, specific surface area, and degree of magnetization. Two laboratory simulation experiments were conducted to assess the improved efficacy of the composites on the treatment of acidic mine water and mine water-contaminated soils. In general, application of the composites resulted in a significantly higher removal rate of mine water-borne trace elements compared to the pristine biochar treatment. The composites also had better effects on immobilizing the soil-borne trace elements and weakening the uptake of trace elements by the test vegetable plant species grown in the composite-treated soils, as compared to the pristine biochar-treated soil. By comparison, the sintering red mud-biochar composite had a generally better performance compared to the Bayer red mud-biochar composite.

Liberation of plastic nanoparticles and organic compounds from three common plastics in water during weathering under UV radiation-free conditions.

A 620-day batch experiment was conducted to examine the generation of nano-sized plastic particles and migration of organic compounds derived from plastic additives and impurities during the weathering of three common plastic types in water with and without reactive oxygen species. The results show that the amount of nanoplastics plus organic compounds liberated from the tested plastic films, as indicated by total organic carbon, was in the following decreasing order: PET >PP > ABS. Hydroxyl radical generated from Fenton-like reaction significantly enhanced the generation of nanoplastics and release of organic compounds from the weathered plastic films via oxidative degradation. Over 30 organic compounds including potentially toxic organic pollutants originated from plastic additives and impurities were detected. There was a marked difference in the plastic nanoparticle size distribution between the deionized water and the water containing reactive oxygen species. The strong oxidizing capacity of hydroxyl radical resulted in rapider disintegration of the coarser nanoparticles (>500 nm) into the finer nanoparticles (<500 nm) and allowed complete decomposition of the nanoplastics with a size <50 nm or even <100 nm. Elevated level of Ca was detected on the surfaces of the ABS and PP nanoparticles. PP- and PET-derived nanoplastics contained heavy metal(loid)s while no heavy metal(loid)s was detected for the ABS nanoparticles. PET nanoparticles had a stronger capacity to bind S- and N-containing organic ligands compared to the other two plastic nanoparticles. The nanoplastics generated from the weathering were irregular in shape, which means that they had larger specific area compared to spherical engineered nanoplastics.

Generation of micro(nano)plastics and migration of plastic additives from Poly(vinyl chloride) in water under radiation-free ambient conditions.

A batch experiment was conducted to observe the liberation of micro- and nano-sized plastic particles and plastic additive-originated organic compounds from poly(vinyl chloride) under radiation-free ambient conditions. The weathering of PVC films in deionized water resulted in isolated pockets of surface erosion. Additional ●OH from Fenton reaction enhanced PVC degradation and caused cavity erosion. The detachment of plastic fragments from the PVC film surfaces was driven by autocatalyzed oxidative degradation. Over 90% of micro-sized plastic particles were <60 µm in length. The detached plastic fragments underwent intensified weathering, which involved strong dehydrochlorination and oxidative degradation. Further fragmentation of micro-sized particles into nano-sized particles was driven by oxidative degradation with complete dehydrochlorination being achieved following formation of nanoplastics. 20 organic compounds released from the PVC films into the solutions were identified. And some of them can be clearly linked to common plastic additives. In the presence of additional ●OH, the coarser nanoplastic particles (>500 nm) tended to be rapidly disintegrated into finer plastic particles (<500 nm), while the finest fraction of nanoplastics (<100 nm) could be completely decomposed and disappeared from the filtrates. The micro(nano)plastics generated from the PVC weathering were highly irregular in shape.

Managing soils of environmental significance: A critical review.

Globally, environmentally significant soils (ESSs) mainly include acid sulfate, heavy metal(loid)-contaminated, petroleum hydrocarbon-contaminated, pesticide-contaminated, and radionuclide-contaminated soils. These soils are interrelated and have many common characteristics from an environmental management perspective. In this review, we critically evaluate the available literature on individual ESSs, aiming to identify common problems related to environmental quality/risk assessment, remediation approaches, and environmental regulation for these soils. Based on these findings, we highlight the challenges to, and possible solutions for sustainable ESS management. Contaminated land has been rapidly expanding since the first industrial revolution from the industrialized Western countries to the emerging industrialized Asia and other parts of the world. Clean-up of contaminated lands and slowdown of their expansion require concerted international efforts to develop advanced cleaner production and cost-effective soil remediation technologies in addition to improvement of environmental legislation, regulatory enforcement, financial instruments, and stakeholder involvement to create enabling environments. Two particular areas require further action and research efforts: developing a universal system for assessing ESS quality and improving the cost-effectiveness of remediation technologies. We propose an integrated framework for deriving ESS quality indicators and make suggestions for future research directions to improve the performance of soil remediation technologies.

Generation of microplastic particles during degradation of polycarbonate films in various aqueous media and their characterization.

A 250-day batch experiment was conducted to examine the generation of microplastic particles from degradation of polycarbonate films in 3 aqueous media of environmental relevance. The microplastic particles generated from the experiment were characterized by SEM/EDS and micro-FTIR analysis. Hydrolysis was responsible for the cleavage of carbon-oxygen bonds in the carbonate group of polycarbonate backbone and detachment of micro-sized plastic particles from the PC film surfaces. The deionized water treatment had the highest concentration of total organic carbon and the greatest number of microplastic particles among the three treatments. Either elevated acidity or the presence of hydroxyl radical did not enhance the hydrolytic degradation of the PC films and generation of microplastic particles though hydroxyl radical caused oxidative degradation of polycarbonate by attacking the organic group but not the carbonate group. Bisphenol A was not detected in any of the treatments. The microplastic particles generated from the current experiment were highly irregular, which may have different physicochemical and toxic behaviours from the spheric synthetic ones that were frequently used in toxicity experiments.