Wireless Multimodality Sensing System-on-a-Chip With Time-Based Resolution Scaling Technique and Analog Waveform Generator in 0.18 µm CMOS for Chronic Wound Care.

Multimodal sensing can provide a comprehensive and accurate diagnosis of biological information. This paper presents a fully integrated wireless multimodal sensing chip with voltammetric electrochemical sensing at a scanning rate range of 0.08-400 V/s, temperature monitoring, and bi-phasic electrical stimulation for wound healing progress monitoring. The time-based readout circuitry can achieve a 1-20X scalable resolution through dynamic threshold voltage adjustment. A low-noise analog waveform generator is designed using current reducer techniques to eliminate the large passive components. The chip is fabricated via a 0.18 µm CMOS process. The design achieves R2 linearity of 0.995 over a wide current detection range (2 pA-12 µA) while consuming 49 µW at 1.2 V supply. The temperature sensing circuit achieves a 43 mK resolution from 20 to 80 degrees. The current stimulator provides an output current ranging from 8 µA to 1 mA in an impedance range of up to 3 kΩ. A wakeup receiver with data correlators is used to control the operation modes. The sensing data are wirelessly transmitted to the external readers. The proposed sensing IC is verified for measuring critical biomarkers, including C-reactive protein, uric acid, and temperature.

Dry Wearable Textile Electrodes for Portable Electrical Impedance Tomography.

Electrical impedance tomography (EIT), a noninvasive and radiation-free medical imaging technique, has been used for continuous real-time regional lung aeration. However, adhesive electrodes could cause discomfort and increase the risk of skin injury during prolonged measurement. Additionally, the conductive gel between the electrodes and skin could evaporate in long-term usage and deteriorate the signal quality. To address these issues, in this work, textile electrodes integrated with a clothing belt are proposed to achieve EIT lung imaging along with a custom portable EIT system. The simulation and experimental results have verified the validity of the proposed portable EIT system. Furthermore, the imaging results of using the proposed textile electrodes were compared with commercial electrocardiogram electrodes to evaluate their performance.