Poly(3-hexylthiophene)/perovskite Heterointerface by Spinodal Decomposition Enabling Efficient and Stable Perovskite Solar Cells.

The best research-cell efficiency of perovskite solar cells (PSCs) is comparable with that of mature silicon solar cells (SSCs); However, the industrial development of PSCs lags far behind SSCs. PSC is a multiphase and multicomponent system, whose consequent interfacial energy loss and carrier loss seriously affect the performance and stability of devices. Here, by using spinodal decomposition, a spontaneous solid phase segregation process, in situ introduces a poly(3-hexylthiophene)/perovskite (P3HT/PVK) heterointerface with interpenetrating structure in PSCs. The P3HT/PVK heterointerface tunes the energy alignment, thereby reducing the energy loss at the interface; The P3HT/PVK interpenetrating structure bridges a transport channel, thus decreasing the carrier loss at the interface. The simultaneous mitigation of energy and carrier losses by P3HT/PVK heterointerface enables n-i-p geometry device a power conversion efficiency of 24.53% (certified 23.94%) and excellent stability. These findings demonstrate an ingenious strategy to optimize the performance of PSCs by heterointerface via Spinodal decomposition.

Bile acid alterations associated with indolent course of inflammatory bowel disease.

BACKGROUND: The indolent course of treatment-naive patients with inflammatory bowel disease (IBD) is confirmed predictable based on clinical characteristics. Current evidences supported that bile acids (BAs) alteration might be promising biomarkers in the field of IBD. We aimed to analyze the alterations of BAs as the disease progresses and explore their predictive value for indolent course of IBD. METHODS: The indolent course of IBD was defined as a disease course without need for strict interventions throughout the entire follow-up. A targeted metabolomics method was used to detect the concentration of 27 BAs from serum sample in treatment-naive patients with IBD (Crohn's disease [CD], n = 27; ulcerative colitis [UC], n = 50). Patients with CD and UC were individually divided into two groups for further study according to the median time of indolent course. The overall BAs profile and the clinical value of BAs in predicting indolent course of IBD were identified between different groups. RESULTS: For CD, the levels of deoxycholic acid, glycodeoxycholic acid, taurodeoxycholic acid, glycolithocholic acid-3-sulfate disodium salt and iso-lithocholic acid were significantly increased in patients with indolent course > 18 M (p < 0.05). These five BAs owned 83.5% accuracy for predicting indolent course over 18 months in CD. For UC, the concentration of deoxycholic acid and glycodeoxycholic acid were significantly higher, while dehydrocholic acid were lower in patients with indolent course > 48 M (p < 0.05). These three BAs predicted indolent course over 48 months of 69.8% accuracy in UC. CONCLUSION: The specific BAs alterations might be potential biomarkers in predicting disease course of IBD patients.

Mucosa-Associated Oscillospira sp. Is Related to Intestinal Stricture and Post-Operative Disease Course in Crohn's Disease.

Intestinal stricture remains one of the most intractable complications in Crohn's disease (CD), and the involved mechanisms are poorly understood. Accumulating evidence suggests that the gut microbiota contributes to the pathogenesis of intestinal fibrosis. In this study, we investigated specific mucosa-associated microbiota related to intestinal strictures and their role in predicting postoperative disease course. Twenty CD patients who had undergone operative treatments were enrolled and followed up. Intestinal mucosa and full-thickness sections from stenotic and non-stenotic sites were sterilely collected. DNA extraction and bacterial 16s rRNA gene sequencing were conducted. Radiological and histological evaluations were performed to assess fibrosis. Microbial alpha diversity was significantly decreased in stenotic sites (p = 0.009). At the genus level, Lactobacillus, Oscillospira, Subdoligranulum, Hydrogenophaga, Clostridium and Allobaculum were decreased in stenotic segments (p < 0.1). The difference in Oscillospira sp. (stenotic vs. non-stenotic) was negatively correlated with the erythrocyte sedimentation rate (correlation coefficient (CC) -0.432, p = 0.057) and white blood cell count (CC -0.392, p = 0.087) and positively correlated with serum free fatty acids (CC 0.575, p < 0.05). This difference was negatively associated with intestinal fibrosis evaluated by imagological and histological methods (CC -0.511 and -0.653, p < 0.05). Furthermore, CD patients with a higher abundance of Oscillospira sp. in the residual intestine might experience longer remission periods (p < 0.05). The mucosa-associated microbiota varied between stenotic and non-stenotic sites in CD. Most notably, Oscillospira sp. was negatively correlated with intestinal fibrosis and postoperative disease course. It could be a promising biomarker to predict post-operative disease recurrence and a microbial-based therapeutic target.

Deregulated Expression of miR-483-3p Serves as a Diagnostic Biomarker in Severe Pneumonia Children with Respiratory Failure and Its Predictive Value for the Clinical Outcome of Patients.

Severe pneumonia in children is a group of inflammatory diseases of respiratory tract caused by pathogenic microorganisms. Increasing evidence suggested the crucial effects of microRNA on inflammatory diseases. This study aimed to reveal the expression and role of miR-483-3p in the serum of children with severe pneumonia, and to explore the effect of miR-483-3p on the biological function of lipopolysaccharide (LPS)-induced MRC-5 cells. MRC-5 cells were disposed with LPS to construct an in vitro pneumonia cell model. The relative expression level of miR-483-3p was measured by qRT-PCR. ROC curve was used to evaluate the diagnostic value of miR-483-3p in severe pneumonia. The Kaplan-Meier curve was performed to test the characteristics of survival distribution of different miRNA classifications. Cell viability and apoptosis were performed by CCK-8 assay and flow cytometry. IL-1ß, TNF-α, and IL-6 were detected by ELISA. Luciferase reporter gene assay and western blot analysis were performed to detect the interaction between miR-483-3p and IGF-1. The expression of serum miR-483-3p in severe pneumonia patients was higher than in controls. The AUC value of the ROC curve was 0.919, indicating that miR-483-3p had diagnostic value for severe pneumonia. The survival curve showed that patients with high expression of miR-483-3p had higher mortality. Cell viability and apoptosis assay showed that overexpression of miR-483-3p suppressed cell proliferation and promoted apoptosis. And upregulation of miR-483-3p promoted generation of inflammatory cytokines. Luciferase report gene assay and western blot assay both illustrated that IGF-1 might be the target gene of miR-483-3p. Serum miR-483-3p can be used as a biomarker for the diagnosis of severe pneumonia. High expression of miR-483-3p promoted the development of severe pneumonia.

Country-Specific Environmental Risks of Fragrance Encapsulates Used in Laundry Care Products.

Fragrance encapsulates (FEs) are designed to deliver fragrance components, notably in laundry care products. They are made of thermoset polymeric shells surrounding the fragrance content. These materials enter the environment mainly during laundry washing, but little is known about their distribution in and impact on the environment. The aim of the present study was to estimate the environmental concentrations of FE shells in freshwater, sediment, and soil compartments for 34 selected countries and to compare them with ecotoxicological effects. Probabilistic material flow analysis was used to estimate worst-case predicted environmental concentrations (PECs). The lowest freshwater PEC was predicted for Finland (0.00011 µg/L) and the highest for Belgium (0.13 µg/L). Accumulation of FE shells between 2010 and 2019 was considered for sediments and sludge-treated soils. The PECs in sediments ranged from 3.0 µg/kg (Finland) to 3400 µg/kg (Belgium). For sludge-treated soil, the concentration was estimated to be between 0 (Malta and Switzerland) and 3600 µg/kg (Vietnam). Ecotoxicological tests showed no effects for FE shells at any tested concentration (up to 2700 µg/L freshwater, 5400 µg/kg sediment, and 9100 µg/kg soil), thus not allowing derivation of a predicted-no-effect concentration (PNEC). Therefore, to characterize the environmental risks, the PEC values were compared with highest-observed-no-effect concentrations (HONECs) derived from ecotoxicological tests. The PEC/HONEC ratios were 9.3 × 10-6 , 0.13, and 0.04 for surface waters, sediments, and sludge-treated soils, respectively, which are much below 1, suggesting no environmental risk. Because the PEC values constitute an upper boundary (no fate considered) and the HONEC values represent a lower boundary (actual PNEC values based on NOECs will be higher), the current risk estimation can be considered a precautionary worst-case assessment. Environ Toxicol Chem 2022;41:905-916. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Surface Reconstruction and In Situ Formation of 2D Layer for Efficient and Stable 2D/3D Perovskite Solar Cells.

The 2D/3D composite structure possesses both the excellent stability of 2D perovskite and the excellent performance of 3D perovskite, which recently have attracted special attention. Different from the popular isopropanol, a novel additive solvent-polypropylene glycol bis (2-aminopropyl ether) (A-PPG) is introduced here to dissolve excess PbI2 and perovskite, and then reconstruct and in situ form the quasi-2D perovskite layer on 3D perovskite bulk. The lone electron pairs of the ether-oxygen and amino in A-PPG can form coordination bonds with Pb2+ . The introduction of A-PPG tunes the energy array of functional layers, passivates defects, and mitigates carrier nonradiative recombination. Consequently, the 2D/3D perovskite device exhibits a championship efficiency of 22.24% with a distinguished open-circuit voltage of 1.21 V (the thermodynamic limit of 1.30 V). Moreover, the 2D/3D device still maintains 90% of the original efficiency in the ambient atmosphere with a relative humidity of 30 ± 10% after 50 days.

Hotspots, Frontiers, and Emerging Trends of Superabsorbent Polymer Research: A Comprehensive Review.

Superabsorbent polymer (SAP) is a kind of functional macromolecule with super-high water absorption and retention properties, which attracts extensive research and has wide application, especially in the areas of hygiene and agriculture. With reference to the Web of Science database, the SAP research literature from 2000 to 2019 is reviewed both quantitatively and qualitatively. By examining research hotspots, top research clusters, the most influential works, the representative frontier literature, and key emerging research trends, a visual panorama of the continuously and significantly increasing SAP research over the past 2 decades was presented, and issues behind the sharp increase in the literature were discovered. The findings are as follows. The top ten keywords/hotspots headed by hydrogel highlight the academic attention on SAP properties and composites. The top ten research themes headed by clay-based composites which boast the longest duration and the strongest impact have revealed the academic preference for application rather than theoretical study. Academically influential scholars and research studies have been acknowledged, and the Wu group was at the forefront of the research; however, more statistically significant works have been less detected in the last 10 years despite the sharper increase in publications. Hydrogel, internal curing, and aerogel are both current advances and future directions.

Factors affecting the mixed-layer concentrations of singlet oxygen in sunlit lakes.

The steady-state concentration of singlet oxygen within a lake ([1O2]SS) is an important parameter that can affect the environmental half-life of pollutants and environmental fate modelling. However, values of [1O2]SS are often determined for the near-surface of a lake, and these values typically do not represent the average over the epilimnia of lakes. In this work, the environmental and physical factors that have the largest impact on [1O2]SS within lake epilimnia were identified. It was found that the depth of the epilimnion has the largest impact on depth-averaged [1O2]SS, with a factor of 8.8 decrease in [1O2]SS when epilimnion depth increases from 2 m to 20 m. The next most important factors are the wavelength-dependent singlet oxygen quantum yield relationship and the latitude of the lake, causing variations in [1O2]SS by factors of 3.2 and 2.5 respectively, over ranges of representative values. For a set of representative parameters, the depth-averaged value of [1O2]SS within an average epilimnion depth of 9.0 m was found to be 5.8 × 10-16 M and the near-surface value of [1O2]SS was found to be 1.9 × 10-14 M. We recommend a range of 6 × 10-17 to 5 × 10-15 M as being more representative of [1O2]SS values within the epilimnia of lakes globally and potentially more useful for estimating pollutant lifetimes than those calculated using [1O2]SS values that correspond to near-surface, summer midday values. This work advances our understanding of [1O2]SS inter-lake variability in the environment, and provides estimates of [1O2]SS for practitioners and researchers to assess environmental half-lives of pollutants due to reaction with singlet oxygen.

The Clinical Features of FLAIR-Hyperintense Lesions in Anti-MOG Antibody Associated Cerebral Cortical Encephalitis with Seizures: Case Reports and Literature Review.

Background: The presence of fluid attenuated inversion recovery (FLAIR)-hyperintense lesions in anti-myelin oligodendrocyte glycoprotein (MOG) antibody-associated cerebral cortical encephalitis with seizures (FLAMCES) was recently reported. However, the clinical characteristics and outcome of this rare clinico-radiographic syndrome remain unclear. Methods: The present study reported two new cases. In addition, cases in the literature were systematically reviewed to investigate the clinical symptoms, magnetic resonance imaging (MRI) abnormalities, treatments and prognosis for this rare clinico-radiographic syndrome. Results: A total of 21 cases were identified during a literature review, with a mean patient age at onset of 26.8 years. The primary clinicopathological characteristics included seizures (100%), headache (71.4%), fever (52.3%) and other cortical symptoms associated with the encephalitis location (61.9%). The common seizure types were focal to bilateral tonic-clonic seizures (28.6%) and unknown-onset tonic-clonic seizures (38.1%). The cortical abnormalities on MRI FLAIR imaging were commonly located in the frontal (58.8%), parietal (70.6%) and temporal (64.7%) lobes. In addition, pleocytosis in the cerebrospinal fluid was reported in the majority of the patients (95.2%). All patients received a treatment regimen of corticosteroids and 9 patients received anti-epileptic drugs. Clinical improvement was achieved in all patients; however, one-third of the patients reported relapse following recovery from cortical encephalitis. Conclusions: FLAMCES is a rare phenotype of MOG-associated disease. Thus, the wider recognition of this rare syndrome may enable timely diagnosis and the development of suitable treatment regimens.

Removal of humic acid and Cr(â ¥) from water using ZnO-30N-zeolite.

The mutual influence of humic acid and Cr(Ⅵ) on water purification using ZnO-30N-zeolite was investigated in the laboratory. The removal of humic acid by ZnO-30N-zeolite with both pollutants present reached 90% in 5 min. With humic acid alone, more than one day was required to reach the same level of removal. Synergy between humic acid and chromium was thus demonstrated in their removal process by ZnO-30N-zeolite. However, the presence of humic acid showed no obvious effect on the removal capacity of Cr(Ⅵ) by ZnO-30N-zeolite. X-ray photoelectron spectra showed that Cr(VI) was reduced to Cr(Ⅲ) in the process by both humic acid and ZnO-30N-zeolite. The kinetic mechanism of synergistic removal of humic acid and Cr(Ⅵ) by ZnO-30N-zeolite in binary pollutant system was also proposed.

Additive Engineering by Bifunctional Guanidine Sulfamate for Highly Efficient and Stable Perovskites Solar Cells.

High efficiency and good stability are the challenges for perovskite solar cells (PSCs) toward commercialization. However, the intrinsic high defect density and internal nonradiative recombination of perovskite (PVK) limit its development. In this work, a facile additive strategy is devised by introducing bifunctional guanidine sulfamate (GuaSM; CH6 N3 + , Gua+ ; H2 N-SO3 - , SM- ) into PVK. The size of Gua+ ion is suitable with Pb(BrI)2 cavity relatively, so it can participate in the formation of low-dimensional PVK when mixed with Pb(BrI)2 . The O and N atoms of SM- can coordinate with Pb2+ . The synergistic effect of the anions and cations effectively reduces the trap density and the recombination in PVK, so that it can improve the efficiency and stability of PSCs. At an optimal concentration of GuaSM (2 mol%), the PSC presents a champion power conversion efficiency of 21.66% and a remarkably improved stability and hysteresis. The results provide a novel strategy for highly efficient and stable PSCs by bifunctional additive.

Efficient Removal of Cr(VI) Ions by a Novel Magnetic 4-Vinyl Pyridine Grafted Ni3Si2O5(OH)4 Multiwalled Nanotube.

The contamination of water systems by heavy metals greatly threatens human health and ecological safety. An efficient adsorbent is critical for the removal of these contaminants. In this work, magnetic Ni3Si2O5(OH)4 nanotubes (NTs) have been synthesized via in situ hydrothermal reduction and further functionalized by grafting poly(4-vinyl pyridine) (P4VP) brushes on its surface via atom transfer radical polymerization. Characterizations by Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, transmission electron microscopy, and X-ray photoelectron spectroscopy proved that P4VP was successfully grafted on the surface of magnetic Ni3Si2O5(OH)4 NTs. The resultant Ni3Si2O5(OH)4-g-P4VP NTs are efficient nanosorbents for removing Cr(VI) anions from water. The Cr(VI) adsorption capacity of Ni3Si2O5(OH)4-g-P4VP NTs reaches 1.49 mmol/g at a pH of 3. The pseudo-second-order kinetic model and the Freundlich isothermal model are suitable to describe the adsorption process. The analysis using Weber-Morris and Boyd models indicates that both intraparticle diffusion and external film diffusion affect the Cr(VI) adsorption process. The adsorption enthalpy is estimated to be 18.37 kJ/mol. More than 90% of the Cr(VI) adsorption capacity of the Ni3Si2O5(OH)4-g-P4VP NTs remains after eight adsorption and desorption cycles.

Defect Control Strategy by Bifunctional Thioacetamide at Low Temperature for Highly Efficient Planar Perovskite Solar Cells.

Titania (TiO2) has wide applications in the realm of perovskite solar cells (PSCs). Because high-temperature processing severely limits the application of flexible and tandem devices, it is significant to develop a high-quality electron-transport layer (ETL) by low-temperature processing. Here, we design a new strategy by introducing a bifunctional molecule (thioacetamide, TAA) in the TiO2 ETL. During the low-temperature annealing, the N and S atoms in TAA can bond with the Ti atom in the ETL and the Pb atom in the perovskite (PVK) layer, respectively. The formation of coordinate bonds is beneficial to increase the crystallinity and reduce the roughness of TiO2 ETLs and PVK layers, which effectively passivate the defects. Meanwhile, the energy level matching between the ETL and PVK is optimized. The structure characterization and electrochemical measurement demonstrate the design. Compared with precursor doping, surface spin-coating is a more effective method for introducing TAA into TiO2. Significantly, the PSC based on the surface spin-coated TAA TiO2 ETL achieves the best power conversion efficiency (PCE) of 21.17%. Nevertheless, the PSC fabricated with the pristine TiO2 ETL offers a PCE of 19.52% under the same conditions. The results demonstrate a novel method for optimizing the properties of PSCs.

PAMPS-graft-Ni3Si2O5(OH)4 multiwalled nanotubes as a novel nano-sorbent for the effective removal of Pb(ii) ions.

The existence of Pb(ii) ions in water systems poses significant potential hazards to public health and the environment. In the present study, poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) brush-modified Ni3Si2O5(OH)4 nanotubes were prepared, and their adsorption efficiency against the Pb(ii) ions was investigated. The characterization results of FTIR spectroscopy, TGA, TEM, and XPS indicated the successful grafting of PAMPS on the surface of free Ni3Si2O5(OH)4 NTs, and the prepared PAMPS-g-Ni3Si2O5(OH)4 NTs exhibited a 6-8 nm grafting layer, which could provide abundant binding sites for metal adsorption. During the Pb(ii) removal process, a pH-dependent adsorption behavior was observed, and the adsorption processes fitted well with the pseudo-second-order kinetic model and the Langmuir isotherm model. Compared with unmodified Ni3Si2O5(OH)4, the PAMPS-g-Ni3Si2O5(OH)4 NTs exhibited obviously faster adsorption of Pb(ii) and higher equilibrium adsorption capacity for the removal of Pb(ii). The maximum adsorption capacity calculated via the Langmuir isotherm model was 0.653 mmol g-1 (135.3 mg g-1) at 298 K. In a metal coexisting system, the total adsorption capacity of the NTs was increased; this indicated the potential of the proposed NTs in the removal of Pb(ii) from metal coexisting wastewater. This study showed the significant potential of PAMPS-g-Ni3Si2O5(OH)4 NTs in the effective removal of Pb(ii).

Suppressing Vacancy Defects and Grain Boundaries via Ostwald Ripening for High-Performance and Stable Perovskite Solar Cells.

As one kind of promising next-generation photovoltaic devices, perovskite solar cells (PVSCs) have experienced unprecedented rapid growth in device performance over the past few years. However, the practical applications of PVSCs require much improved device long-term stability and performance, and internal defects and external humidity sensitivity are two key limitation need to be overcome. Here, gadolinium fluoride (GdF3 ) is added into perovskite precursor as a redox shuttle and growth-assist; meanwhile, aminobutanol vapor is used for Ostwald ripening in the formation of the perovskite layer. Consequently, a high-quality perovskite film with large grain size and few grain boundaries is obtained, resulting in the reduction of trap state density and carrier recombination. As a result, a power conversion efficiency of 21.21% is achieved with superior stability and negligible hysteresis.

True random number generation based on arrival time and position of dark counts in a multichannel silicon photomultiplier.

Silicon photomultiplier (SiPM) arrays normally contain tens of photon detection channels, with each channel consisting of several thousand microcells and each microcell being a normal single-photon avalanche diode with a quenching resistor. The dark counts of SiPM arrays have independent spatial and temporal randomness, which will be used for true random number generation in this paper. Since the arrival times of the high dark count rate in each channel are measured with a fast, high precision time-to-digital converter, along with the number of channels, the entropy can be extracted with very high efficiency. The bias in the raw data due to the exponential distribution of the arrival time differences between successive dark counts is removed using the transformation of the cumulative distribution function. Except for the preamplifiers for a signal readout from a 4-channel SiPM, all electronics components in our prototype are implemented inside of one chip of a field programmable gate array. The prototype has a 63.54 Mbps generation throughput, and the statistical quality of the generated random numbers is evaluated. Since the property of the dark count is compatible with single-photons from laser beams, one can easily increase the generation bitrate by either adding more SiPM channels or irradiating the SiPM with extra laser beams.

Effect of ropivacaine on peripheral neuropathy in streptozocin diabetes-induced rats through TRPV1-CGRP pathway.

Objective To determine the effect of ropivacaine on peripheral neuropathy in diabetic rats and its possible mechanism. Methods Forty-eight Sprague-Dawley rats were randomly divided into six groups: nondiabetic control group, nondiabetic group A (0.25% ropivacaine), nondiabetic group B (0.75% ropivacaine), diabetic control group (diabetic peripheral neuropathy (DPN) +artificial cerebrospinal fluid), diabetic group A (DPN+0.25% ropivacaine), and diabetic group B (DPN + 0.75% ropivacaine), with eight rats in each group. Within an hour of the last administration, the sciatic motor nerve conduction velocity (MNCV) of each group was measured, and the morphological changes of rat sciatic nerve were observed by HE, Weil's staining and electron microscopy. The expression of transient receptor potential vanilloid (TRPV1) in the spinal cord dorsal horn of rats was analyzed by immunohistochemistry, and the expression of Calcitonin gene-related peptide (CGRP) protein in the spinal cord was analyzed by Western blot. Results Compared with the nondiabetic control group, elevated blood glucose, decreased weight and reduced average mechanical withdrawal threshold (MWT), additionally, the sciatic nerves showed significantly slowed conduction velocity (both P<0.001) and damaged pathological structure, the expression of TRPV1 and CGRP were decreased (both P<0.001) in the diabetic groups. Compared with the diabetic control group, down-regulation of TRPV1 and CGRP in spinal cord was significant for the diabetic groups A and B treated with 0.25 and 0.75% ropivacaine, the higher concentration of ropivacaine correlated with a greater change. Conclusion Ropivacaine can significantly block sciatic nerve conduction velocity in DPN rats in a concentration-dependent manner, which may be related to the expression of the TRPV1-CGRP pathway.

A streamlined workflow to study direct photodegradation kinetic and transformation products for persistence assessment of a fragrance ingredient in natural waters.

Photodegradation can be an important abiotic degradation process to consider for the fate and persistence assessment of chemical substances in the environment. In this work, using a fragrance ingredient (FI, (E)-4-(2,2,3,6-tetramethylcyclohexyl)but-3-en-2-one) as an example, we developed a streamlined workflow to investigate direct photodegradation of chemicals in the aquatic environment, including laboratory investigation of kinetics and transformation products and estimation of its aquatic environmental half-lives. Direct photodegradation was determined to be the dominant photodegradation process for FI with a quantum yield of 0.25, which was supported by photodegradation experiments conducted in natural sunlight. Accounting for light attenuation by dissolved organic matter in natural waters of different depths resulted in aquatic half-lives of <31 days even at polar latitudes. Photoisomerization was shown to be a major photodegradation pathway along with the formation and subsequent degradation of constitutional isomers and photooxidation products. These results contributed to FI being assessed as non-persistent in the environment.

Bone-Bound Bisphosphonates Inhibit Proliferation of Breast Cancer Cells.

Bisphosphonates are used in treating patients with breast cancer. In vitro studies have shown that bisphosphonates act directly on tumour cells, inhibiting cell proliferation and inducing apoptosis. In most such studies, drugs were added to culture media exposing cells to high bisphosphonate concentrations in solution. However, since bisphosphonates bind to bone hydroxyapatite with high affinity and remain bound for very long periods of time, these experimental systems are not an optimal model for the action of the drugs in vivo. The aim of this study was to determine whether bone-bound zoledronate has direct effects on adjacent breast cancer cells. Bone slices were pre-incubated with bisphosphonate solutions, washed, and seeded with cells of the breast cancer cell lines, MCF7 or MDA-MB-231. Proliferation was assessed by cell counts and thymidine incorporation for up to 72 h. Inhibition of the mevalonate pathway was tested by measuring the levels of unprenylated Rap1A, and apoptosis was examined by the presence of cleaved caspase-8 on western blots. The proliferation rate of breast cancer cells on zoledronate-treated bone was significantly lower compared to cells on control bone. Other bisphosphonates showed a similar inhibitory effect, with an order of potency similar to their clinical potencies. Unprenylated Rap1A accumulated in MCF7 cells on zoledronate-treated bone, suggesting zoledronate acted through the inhibition of the mevalonate pathway. Accumulation of cleaved caspase-8 in MDA-MB-231 cells on bisphosphonate-treated bone indicated increased apoptosis in the cells. In conclusion, bone-bound zoledronate inhibits breast cancer cell proliferation, an activity that may contribute to its clinical anti-tumour effects.

Zinc oxide-coated zeolite adsorbs and inactivates waterborne Staphylococcus aureus.

Zinc oxide-coated zeolite (ZOCZ) and zinc oxide (ZnO) were compared in terms of their effectiveness in removing Staphylococcus aureus (S. aureus) from nutrient broth and phosphate-buffered saline (PBS) solution. ZOCZ was found to be extremely efficient in removing S. aureus. ZnO initially was much less effective. Photographs of removal S. aureus from PBS solution with ZOCZ confirmed that a multilayer of S. aureus cells forms on the surface of ZOCZ particles. The comparison of the images of confocal laser scanning microscope and inverted contrast fluorescence microscope further proved that a multilayer of S. aureus cells formed on the surface of ZnO-30N-zeolite. The FESEM images showed that the cell membranes of S. aureus attached to the surface of ZnO-30N-zeolite collapsed. Energy Dispersive X-Ray Spectrum and the atomic absorption spectroscopic analysis confirmed that zinc ions penetrate into S. aureus cells, causing their death. The dead cells were easily removed, allowing ZOCZ to be reused.