A Better Choice to Achieve High Volumetric Energy Density: Anode-Free Lithium-Metal Batteries.

Volumetric energy density is a critical but easily neglected index of lithium-metal batteries (LMBs). Compared with gravimetric energy density, the volumetric energy density (VED) of LMBs is much more sensitive to the anode/cathode (A/C) ratio due to the low density of lithium (Li) metal and the volume expansion of the Li-metal anode owing to its pulverization during cycles. Anode-free LMBs (AF-LMBs) have high theoretical VED due to the absence of an anode and high retention with relatively low cell expansion. Because Li plating highly depends on the mother substrate, Li plating on copper (Cu) substrates is more reversible and denser than that on Li substrates during cycling, which is beneficial for maintaining high volumetric capacity and efficient Li utilization. Therefore, considering that excess Li must be strictly limited to achieve competitive energy density, AF-LMBs (with bare Cu foil as the anode current collector) for high-volumetric-density batteries are recommended.

Li-Rich Li2 [Ni0.8 Co0.1 Mn0.1 ]O2 for Anode-Free Lithium Metal Batteries.

Anode-free lithium metal batteries can maximize the energy density at the cell level. However, without the Li compensation from the anode side, it faces much more challenging to achieve a long cycling life with a competitive energy density than Li metal-based batteries. Here, we prolong the lifespan of an anode-free Li metal battery by introducing Li-rich Li2 [Ni0.8 Co0.1 Mn0.1 ]O2 into the cathode as a Li-ions extender. The Li2 [Ni0.8 Co0.1 Mn0.1 ]O2 can release a large amount of Li-ions during the first charging process to supplement the Li loss in the anode, then convert into NCM811, thus extending the lifespan of the battery without the introduction of inactive elements. By the benefit of Li-rich cathode and high reversibility of Li metal on Cu foil, the anode-free pouch cells enable to achieve 447 Wh kg-1 energy density and 84 % capacity retention after 100 cycles in the condition of limited electrolyte addition (E/C ratio of 2 g Ah-1 ).

Mesoporous Amorphous Silicon: A Simple Synthesis of a High-Rate and Long-Life Anode Material for Lithium-Ion Batteries.

Amorphous Si (a-Si) shows potential advantages over crystalline Si (c-Si) in lithium-ion batteries, owing to its high lithiation potential and good tolerance to intrinsic strain/stress. Herein, porous a-Si has been synthesized by a simple process, without the uses of dangerous or expensive reagents, sophisticated equipment, and strong acids that potential cause environment risks. These porous a-Si particles exhibit excellent electrochemical performances, owing to their porous structure, amorphous nature, and surface modification. They deliver a capacity of 1025 mAh g-1 at 3 A g-1 after 700 cycles. Moreover, the reversible capacity after electrochemical activation, is quite stable throughout the cycling, resulting in a capacity retention about around 88 %. The direct comparison between a-Si and c-Si anodes clearly supports the advantages of a-Si in lithium-ion batteries.