Engineering ZrO2-Ru interface to boost Fischer-Tropsch synthesis to olefins.

Understanding the structures and reaction mechanisms of interfacial active sites in the Fisher-Tropsch synthesis reaction is highly desirable but challenging. Herein, we show that the ZrO2-Ru interface could be engineered by loading the ZrO2 promoter onto silica-supported Ru nanoparticles (ZrRu/SiO2), achieving 7.6 times higher intrinsic activity and ~45% reduction in the apparent activation energy compared with the unpromoted Ru/SiO2 catalyst. Various characterizations and theoretical calculations reveal that the highly dispersed ZrO2 promoter strongly binds the Ru nanoparticles to form the Zr-O-Ru interfacial structure, which strengthens the hydrogen spillover effect and serves as a reservoir for active H species by forming Zr-OH* species. In particular, the formation of the Zr-O-Ru interface and presence of the hydroxyl species alter the H-assisted CO dissociation route from the formyl (HCO*) pathway to the hydroxy-methylidyne (COH*) pathway, significantly lowering the energy barrier of rate-limiting CO dissociation step and greatly increasing the reactivity. This investigation deepens our understanding of the metal-promoter interaction, and provides an effective strategy to design efficient industrial Fisher-Tropsch synthesis catalysts.

Control of metal-support interaction for tunable CO hydrogenation performance over Ru/TiO2 nanocatalysts.

The catalytic behavior of CO hydrogenation can be modulated by metal-support interactions, while the role of the support remains elusive. Herein, we demonstrate that the presence of strong metal-support interactions (SMSI) depends strongly on the crystal phase of TiO2 (rutile or anatase) and the treatment conditions for the TiO2 support, which could critically control the activity and selectivity of Ru-based nanocatalysts for CO hydrogenation. High CO conversion and olefin selectivity were observed for Ru/rutile-TiO2 (Ru/r-TiO2), while catalysts supported by anatase (a-TiO2) showed almost no activity. Characterization confirmed that the SMSI effect could be neglected for Ru/r-TiO2, while it is dominant on Ru/a-TiO2 after reduction at 300 °C, resulting in the coverage of Ru nanoparticles by TiOx overlayers. Such SMSI could be suppressed by H2 treatment of the a-TiO2 support and the catalytic activity of the as-obtained Ru/a-TiO2(H2) can be greatly elevated from almost inactive to >50% CO conversion with >60% olefin selectivity. Further results indicated that the surface reducibility of the TiO2 support determines the SMSI state and catalytic performance of Ru/TiO2 in the CO hydrogenation reaction. This work offers an effective strategy to design efficient catalysts for the FTO reaction by regulating the crystal phase of the support.

Homolytic H2 dissociation for enhanced hydrogenation catalysis on oxides.

The limited surface coverage and activity of active hydrides on oxide surfaces pose challenges for efficient hydrogenation reactions. Herein, we quantitatively distinguish the long-puzzling homolytic dissociation of hydrogen from the heterolytic pathway on Ga2O3, that is useful for enhancing hydrogenation ability of oxides. By combining transient kinetic analysis with infrared and mass spectroscopies, we identify the catalytic role of coordinatively unsaturated Ga3+ in homolytic H2 dissociation, which is formed in-situ during the initial heterolytic dissociation. This site facilitates easy hydrogen dissociation at low temperatures, resulting in a high hydride coverage on Ga2O3 (H/surface Ga3+ ratio of 1.6 and H/OH ratio of 5.6). The effectiveness of homolytic dissociation is governed by the Ga-Ga distance, which is strongly influenced by the initial coordination of Ga3+. Consequently, by tuning the coordination of active Ga3+ species as well as the coverage and activity of hydrides, we achieve enhanced hydrogenation of CO2 to CO, methanol or light olefins by 4-6 times.

Effective SrWO4 /TiO2 Heterojunction with Enhanced Carriers Separation and Transfer for Photocatalytic Methane Oxidation.

Photocatalytic methane oxidation to oxygenates with promising performance remains as a grand challenge due to the low productivity and severe overoxidation. Herein, SrWO4 /TiO2 heterojunction was developed for photocatalytic methane oxidation with O2 to liquid oxygenates ( Please replace "oxygenates" with "oxygenated")products under mild reaction conditions. The optimized SrWO4 /TiO2 catalyst exhibited high productivity of 13365 µmol/g with high selectivity of 98.7 % for oxygenates. Benefited from the intimate heterojunction interface of SrWO4 /TiO2 , the constructed I-type heterostructure improved the separation and transfer of photogenerated carriers, and a high-speed transfer channel for photogenerated carriers was fabricated. Simultaneously, the special band structure can increase the amount of photogenerated electrons and holes on the TiO2 surface, which promoted the formation of reactive oxygen species to enhance liquid oxygenates productivity.

Selective Oxidation of Methane to Oxygenates using Oxygen via Tandem Catalysis.

Selective oxidation of methane to oxygenates using low-cost and environment-friendly molecular oxygen (O2 ) under mild reaction conditions is a promising strategy but still remains grand challenge. It is of great importance to accelerate the activation of O2 to generate highly active oxygen species, such as hydroxyl peroxide and hydroxyl species to improve catalytic performance for selective oxidation of methane. Selective oxidation of methane using O2 by coupling with in situ generation of hydrogen peroxide via tandem catalysis ensures the easy formation of active oxygen species for methane activation, leading to high oxygenates productivity under mild conditions. In this concept, we summarized the recent progresses for selective oxidation of methane to oxygenates using O2 based on tandem catalysis by coupling with in situ generation of hydrogen peroxide. The remaining challenges and future perspectives for selective oxidation of methane to oxygenates via tandem catalysis were also proposed.

Direct production of olefins from syngas with ultrahigh carbon efficiency.

Syngas conversion serves as a competitive strategy to produce olefins chemicals from nonpetroleum resources. However, the goal to achieve desirable olefins selectivity with limited undesired C1 by-products remains a grand challenge. Herein, we present a non-classical Fischer-Tropsch to olefins process featuring high carbon efficiency that realizes 80.1% olefins selectivity with ultralow total selectivity of CH4 and CO2 (<5%) at CO conversion of 45.8%. This is enabled by sodium-promoted metallic ruthenium (Ru) nanoparticles with negligible water-gas-shift reactivity. Change in the local electronic structure and the decreased reactivity of chemisorbed H species on Ru surfaces tailor the reaction pathway to favor olefins production. No obvious deactivation is observed within 550 hours and the pellet catalyst also exhibits excellent catalytic performance in a pilot-scale reactor, suggesting promising practical applications.

Recent advances in Co2C-based nanocatalysts for direct production of olefins from syngas conversion.

Syngas conversion provides an important platform for efficient utilization of various carbon-containing resources such as coal, natural gas, biomass, solid waste and even CO2. Various value-added fuels and chemicals including paraffins, olefins and alcohols can be directly obtained from syngas conversion via the Fischer-Tropsch Synthesis (FTS) route. However, the product selectivity control still remains a grand challenge for FTS due to the limitation of Anderson-Schulz-Flory (ASF) distribution. Our previous works showed that, under moderate reaction conditions, Co2C nanoprisms with exposed (101) and (020) facets can directly convert syngas to olefins with low methane and high olefin selectivity, breaking the limitation of ASF. The application of Co2C-based nanocatalysts unlocks the potential of the Fischer-Tropsch process for producing olefins. In this feature article, we summarized the recent advances in developing highly efficient Co2C-based nanocatalysts and reaction pathways for direct syngas conversion to olefins via the Fischer-Tropsch to olefin (FTO) reaction. We mainly focused on the following aspects: the formation mechanism of Co2C, nanoeffects of Co2C-based FTO catalysts, morphology control of Co2C nanostructures, and the effects of promoters, supports and reactors on the catalytic performance. From the viewpoint of carbon utilization efficiency, we presented the recent efforts in decreasing the CO2 selectivity for FTO reactions. In addition, the attempt to expand the target products to aromatics by coupling Co2C-based FTO catalysts and H-ZSM-5 zeolites was also made. In the end, future prospects for Co2C-based nanocatalysts for selective syngas conversion were proposed.

Highly Selective Photocatalytic Aerobic Oxidation of Methane to Oxygenates with Water over W-doped TiO2.

Highly selective conversion of methane to oxygenates with O2 as a green oxidant remains a great challenge. It is still difficult to suppress the generation of COx (x=1, 2) as undesired by-products due to unavoidable overoxidation reaction. Hence, tungsten-doped (W-doped) TiO2 photocatalysts were designed with a tunable band structure for photocatalytic oxidation of methane to C1 oxygenates using O2 at low temperature (30 °C). The W-doping effectively modified the electronic and band structure of pristine TiO2 to enhance photocatalytic performance. Liquid oxygenates productivity could reach as high as 12.2 mmol g-1 with high selectivity of 99.4 %. Moreover, COx selectivity was effectively decreased from 21.2 % over TiO2 to 0.6 % for W-doped catalyst. Detailed characterizations further disclosed that W-doping not only enhanced light absorption, but also promoted the separation of photo-generated carriers to improve methane conversion. This work provides new insights into the design of highly efficient photocatalysts for methane oxidation.

Tandem Catalysis for Selective Oxidation of Methane to Oxygenates Using Oxygen over PdCu/Zeolite.

Selective oxidation of methane to oxygenates with O2 under mild conditions remains a great challenge. Here we report a ZSM-5 (Z-5) supported PdCu bimetallic catalyst (PdCu/Z-5) for methane conversion to oxygenates by reacting with O2 in the presence of H2 at low temperature (120 °C). Benefiting from the co-existence of PdO nanoparticles and Cu single atoms via tandem catalysis, the PdCu/Z-5 catalyst exhibited a high oxygenates yield of 1178 mmol g-1 Pd h-1 (mmol of oxygenates per gram Pd per hour) and at the same time high oxygenates selectivity of up to 95 %. Control experiments and mechanistic studies revealed that PdO nanoparticles promoted the in situ generation of H2 O2 from O2 and H2 , while Cu single atoms not only accelerated the activation of H2 O2 for the generation of abundant hydroxyl radicals (⋅OH) from H2 O2 decomposition, but also enabled the homolytic cleavage of CH4 by ⋅OH to methyl radicals (⋅CH3 ). Subsequently, the ⋅OH reacted quickly with the ⋅CH3 to form CH3 OH with high selectivity.

Cobalt Carbide Nanocatalysts for Efficient Syngas Conversion to Value-Added Chemicals with High Selectivity.

Syngas conversion is a key platform for efficient utilization of various carbon-containing resources including coal, natural gas, biomass, organic wastes, and even CO2. One of the most classic routes for syngas conversion is Fischer-Tropsch synthesis (FTS), which is already available for commercial application. However, it still remains a grand challenge to tune the product distribution from paraffins to value-added chemicals such as olefins and higher alcohols. Breaking the selectivity limitation of the Anderson-Schulz-Flory (ASF) distribution has been one of the hottest topics in syngas chemistry.Metallic Co0 is a well-known active phase for Co-catalyzed FTS, and the products are dominated by paraffins with a small amount of chemicals (i.e., olefins or alcohols). Specifically, a cobalt carbide (Co2C) phase is typically viewed as an undesirable compound that could lead to deactivation with low activity and high methane selectivity. Although iron carbide (FexC) can produce olefins with selectivity up to ∼60%, the fraction of methane is still rather high, and the required high reaction temperature (300-350 °C) typically causes coke deposition and fast deactivation. Recently, we discovered that Co2C nanoprisms with preferentially exposed facets of (020) and (101) can effectively produce olefins from syngas conversion under mild reaction conditions with high selectivity. The methane fraction was limited within 5%, and the product distribution deviated greatly from ASF statistic law. The catalytic performances of Co2C nanoprisms are completely different from that reported for the traditional FT process, exhibiting promising potential industrial application.This Account summarizes our progress in the development of Co2C nanoprisms for Fischer-Tropsch synthesis to olefins (FTO) with remarkable efficiencies and stability. The underlying mechanism for the observed unique catalytic behaviors was extensively explored by combining DFT calculation, kinetic measurements, and various spectroscopic and microscopic investigation. We also emphasize the following issues: particle size effect of Co2C, the promotional effect of alkali and Mn promoters, and the role of metal-support interaction (SMI) in fabricating supported Co2C nanoprisms. Specially, we briefly review the synthetic methods for different Co2C nanostructures. In addition, Co2C can also be applied as a nondissociative adsorption center for higher alcohol synthesis (HAS) via syngas conversion. We also discuss the construction of a Co0/Co2C interfacial catalyst for HAS and demonstrate how to tune the reaction network and strengthen CO nondissociative adsorption ability for efficient production of higher alcohols. We believe that the advances in the development of Co2C nanocatalysts described here present a critic step to produce chemicals through the FTS process.

Cu single-atoms embedded in porous carbon nitride for selective oxidation of methane to oxygenates.

Cu single atoms embedded in the C3N4 (Cu-SAs/C3N4) matrix exhibited high activity with 95% oxygenate selectivity for the direct conversion of methane at ambient temperature. The presence of abundant anchoring sites in C3N4 led to highly dispersed Cu-N4 moieties, which were suggested to be the underlying active sites for methane conversion.

Direct Production of Higher Oxygenates by Syngas Conversion over a Multifunctional Catalyst.

Selective synthesis of higher oxygenates (linear α-alcohols and α-aldehydes, C 2 + OH) from syngas is highly attractive but remains challenging owing to the low C 2 + OH selectivity and low catalytic stability. Herein we introduce a multifunctional catalyst composed of CoMn and CuZnAlZr oxides that dramatically increased the oxygenates selectivity to 58.1 wt %, where more than 92.0 wt % of the produced oxygenates are C 2 + OH. Notably, the total selectivity to value-added chemicals including oxygenates and olefins reached 80.6 wt % at CO conversion of 29.0 % with high stability. The appropriate component proximity can effectively suppress the formation of the undesired C1 products, and the selectively propulsion of reaction network by synergetic effect of different components contributes to the enhanced selectivity to higher oxygenates. This work provides an alternative strategy for the rational design of new catalysts for direct conversion of syngas into higher oxygenates with co-production of olefins.

Direct production of olefins via syngas conversion over Co2C-based catalyst in slurry bed reactor.

Direct production of olefins via syngas conversion over a Co2C-based catalyst was investigated in a slurry bed reactor (SBR). It was found that the total selectivities to olefins and oxygenates reached 88.8C% at a CO conversion of 29.5% at 250 °C, 5 bar and H2/CO = 0.5. The hydrocarbon distribution greatly deviated from the classical Anderson-Schulz-Flory (ASF) distribution, with only 2.6C% methane selectivity was obtained. XRD and TEM characterization verified that the Co2C nanoprisms with special exposed facts of (101) and (020) constitutes the Fischer-Tropsch to olefins (FTO) active site. The catalytic activity increased gradually with rising the reaction temperature, while the product distribution almost kept unchanged under various reaction condition in SBR. Compared to the reaction in FBR, the Co2C-based catalyst exhibited relative better catalytic performance during FTO process in SBR. Specifically, a higher CO conversion, a lower methane selectivity and a higher total selectivities to olefins and oxygenates were achieved in SBR. In addition, the catalyst can be in situ reduced in slurry bed reactor at mild temperature (300 °C) and no obvious deactivation was found within nearly 100 h time-on-stream, which suggested a promising route for the direct production of olefins via syngas in industrial application.

Cobalt carbide nanoprisms for direct production of lower olefins from syngas.

Lower olefins-generally referring to ethylene, propylene and butylene-are basic carbon-based building blocks that are widely used in the chemical industry, and are traditionally produced through thermal or catalytic cracking of a range of hydrocarbon feedstocks, such as naphtha, gas oil, condensates and light alkanes. With the rapid depletion of the limited petroleum reserves that serve as the source of these hydrocarbons, there is an urgent need for processes that can produce lower olefins from alternative feedstocks. The 'Fischer-Tropsch to olefins' (FTO) process has long offered a way of producing lower olefins directly from syngas-a mixture of hydrogen and carbon monoxide that is readily derived from coal, biomass and natural gas. But the hydrocarbons obtained with the FTO process typically follow the so-called Anderson-Schulz-Flory distribution, which is characterized by a maximum C2-C4 hydrocarbon fraction of about 56.7 per cent and an undesired methane fraction of about 29.2 per cent (refs 1, 10, 11, 12). Here we show that, under mild reaction conditions, cobalt carbide quadrangular nanoprisms catalyse the FTO conversion of syngas with high selectivity for the production of lower olefins (constituting around 60.8 per cent of the carbon products), while generating little methane (about 5.0 per cent), with the ratio of desired unsaturated hydrocarbons to less valuable saturated hydrocarbons amongst the C2-C4 products being as high as 30. Detailed catalyst characterization during the initial reaction stage and theoretical calculations indicate that preferentially exposed {101} and {020} facets play a pivotal role during syngas conversion, in that they favour olefin production and inhibit methane formation, and thereby render cobalt carbide nanoprisms a promising new catalyst system for directly converting syngas into lower olefins.