Using small angle x-ray scattering to examine the aggregation mechanism in silica nanoparticle-based ambigels for improved optical clarity.

Silica-based aerogels are a promising low-cost solution for improving the insulation efficiency of single-pane windows and reducing the energy consumption required for space heating and cooling. Two key material properties required are high porosity and small pore sizes, which lead to low thermal conductivity and high optical transparency, respectively. However, porosity and pore size are generally directly linked, where high porosity materials also have large pore sizes. This is unfavorable as large pores scatter light, resulting in reduced transmittance in the visible regime. In this work, we utilized preformed silica colloids to explore methods for reducing pore size while maintaining high porosity. The use of preformed colloids allows us to isolate the effect of solution conditions on porous gel network formation by eliminating simultaneous nanoparticle growth and aggregation found when using typical sol-gel molecular-based silica precursors. Specifically, we used in situ synchrotron-based small-angle x-ray scattering during gel formation to better understand how pH, concentration, and colloid size affect particle aggregation and pore structure. Ex situ characterization of dried gels demonstrates that peak pore widths can be reduced from 15 to 13 nm, accompanied by a narrowing of the overall pore size distribution, while maintaining porosities of 70%-80%. Optical transparency is found to increase with decreasing pore sizes while low thermal conductivities ranging from 95 +/- 13 mW/m K are maintained. Mechanical performance was found to depend primarily on effective density and did not show a significant dependence on solution conditions. Overall, our results provide insights into methods to preserve high porosity in nanoparticle-based aerogels while improving optical transparency.

Structural and Optical Properties of Textured Silicon Substrates by Three-Step Chemical Etching.

We implemented the fabrication of hybrid structures, including pyramids, etching holes, and inverted pyramidal cavities on silicon substrates, by three-step chemical etching. To achieve this, we utilized anisotropic wet etching as the first-step etching to form pyramids of various sizes. Subsequently, metal-assisted chemical etching was performed to develop aligned etching holes on the pyramidal structure. Ultimately, anisotropic wet etching was used again as the third-step etching for the etchant to penetrate holes to form inverted pyramidal cavities. Optimizing the three-step etching treatments, large-scale textured structures with low reflectance could be obtained, and they show potential for applications in sensors, solar cells, photovoltaics, and surface-enhanced Raman scattering (SERS). Examples of using the textured silicon substrates for SERS applications were given.