ABSTRACT
In this paper, AlGaN/GaN high electron mobility transistors (HEMTs) with etched-fin gate structures fabricated to improve device linearity for Ka-band application are reported. Within the proposed study of planar, one-etched-fin, four-etched-fin, and nine-etched-fin devices, which have 50-µm, 25-µm, 10-µm, and 5-µm partial gate widths, respectively, the four-etched-fin gate AlGaN/GaN HEMT devices have demonstrated optimized device linearity with respect to the extrinsic transconductance (Gm) value, the output third order intercept point (OIP3), and the third-order intermodulation output power (IMD3) level. The IMD3 is improved by 7 dB at 30 GHz for the 4 × 50 µm HEMT device. The OIP3 is found to reach a maximum value of 36.43 dBm with the four-etched-fin device, which exhibits high potential for the advancement of wireless power amplifier components for Ka band applications.
ABSTRACT
In this paper, AlGaN/GaN high-electron-mobility transistors (HEMTs) with ohmic etching patterns (OEPs) "fabricated to improve device radio frequency (RF) performance for Ka-band applications" are reported. The fabricated AlGaN/GaN HEMTs with OEP structures were used to reduce the source and drain resistances (Rs and Rd) for RF performance improvements. Within the proposed study using 1 µm hole, 3 µm hole, 1 µm line, and 3 µm line OEP HEMTs with 2 × 25 µm gate widths, the small signal performance, large signal performance, and minimum noise figure (NFmin) with optimized values were measured for 1 µm line OEP HEMTs. The cut-off frequency (fT) and maximum oscillation frequency (fmax) value of the 1 µm line OEP device exhibited optimized values of 36.4 GHz and 158.29 GHz, respectively. The load-pull results show that the 1 µm line OEP HEMTs exhibited an optimized maximum output power density (Pout, max) of 1.94 W/mm at 28 GHz. The 1 µm line OEP HEMTs also exhibited an optimized NFmin of 1.75 dB at 28 GHz. The increase in the contact area between the ohmic metal and the AlGaN barrier layer was used to reduce the contact resistance of the OEP HEMTs, and the results show that the 1 µm line OEP HEMT could be fabricated, producing the best improvement in RF performance for Ka-band applications.
ABSTRACT
An AlGaN/GaN/Si high electron mobility transistor (HEMT) using a GaN:C buffer with a 2 nm AlGaN electron-blocking layer (EBL) is investigated for the first time for millimeter-wave applications. Compared with the double heterostructure field effect transistor (DHFET), the AlGaN/GaN HEMT with the GaN:C/EBL buffer has a lower vertical leakage, higher thermal stability, and better RF performance. In addition, AlGaN EBL can prevent carbon-related traps from GaN:C and improve electron confinement in 2DEG during high-frequency operation. Finally, a Pout of 31.2 dBm with PAE of 21.7% were measured at 28 GHz at 28 V. These results demonstrated the great potential of HEMTs using GaN:C with AlGaN EBL epitaxy technology for millimeter-wave applications.
ABSTRACT
In this work, a low-power plasma oxidation surface treatment followed by Al2O3 gate dielectric deposition technique is adopted to improve device performance of the enhancement-mode (E-mode) AlGaN/GaN metal-oxide-semiconductor high-electron-mobility transistors (MOSHEMTs) intended for applications at millimeter-wave frequencies. The fabricated device exhibited a threshold voltage (Vth) of 0.13 V and a maximum transconductance (gm) of 484 (mS/mm). At 38 GHz, an output power density of 3.22 W/mm with a power-added efficiency (PAE) of 34.83% were achieved. Such superior performance was mainly attributed to the high-quality Al2O3 layer with a smooth surface which also suppressed the current collapse phenomenon.
