ABSTRACT
Gd doped iron-oxide nanoparticles were developed for use in tumour therapy via magnetic fluid hyperthermia (MFH). The effect of the Gd3+ dopant on the particle size and magnetic properties was investigated. The final particle composition varied from Gd0.01Fe2.99O4 to Gd0.04Fe2.96O4 as determined by Inductively coupled plasma atomic emission spectroscopy (ICP-AES). TEM image analysis showed the average magnetic core diameters to be 12 nm and 33 nm for the lowest and highest Gd levels respectively. The specific power adsorption rate (SAR) determined with a field strength of 246 Oe and 52 kHz had a maximum of 38Wg(-1) [Fe] for the Gd0.03Fe2.97O4 sample. This value is about 4 times higher than the reported SAR values for Fe3O4. The potential for in vivo tumour therapy was investigated using a mouse model. The mouse models treated with Gd0.02Fe2.98O4 displayed much slower tumour growth after the first treatment cycle, the tumour had increased its mass by 25% after 7 days post treatment compared to a 79% mass increase over the same period for those models treated with standard iron-oxide or saline solution. After a second treatment cycle the mouse treated with Gd0.02Fe2.98O4 showed complete tumour regression with no tumour found for at least 5 days post treatment.
Subject(s)
Ferric Compounds/therapeutic use , Gadolinium/therapeutic use , Hyperthermia, Induced/methods , Nanoparticles/therapeutic use , Neoplasms, Experimental/pathology , Neoplasms, Experimental/therapy , Animals , Cell Line, Tumor , Mice , Treatment OutcomeABSTRACT
A novel potential treatment technique applied to a glucose biosensor that is based on pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase (GDH) and chromium hexacyanoferrate (CrHCF) incorporated into a platinum (Pt) electrode was demonstrated. CrHCF, serving as a mediator, was electrochemically deposited on the Pt electrode as ascertained by CV, SEM, FTIR and XPS measurements. The potential treatment of CrHCF, which converts Fe(II) to Fe(III), enables the glucose detection. The amperometric measurement linearity of the biosensor was up to 20 mM (R = 0.9923), and the detection sensitivity was 199.94 nA/mM per cm(2). More importantly, this biosensor remained stable for >270 days.
