Nanocellulose extraction from acai bagasse through mixed acid hydrolysis and oxidative techniques.

Exploring new biomass sources for nanocellulose (NC) extraction is crucial in elevating the economic value of readily available renewable resources. This study compares NC extracted from acai (Euterpe oleracea) bagasse using different methods: mixed acid hydrolysis, 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) mediation, and ammonium persulfate (APS) oxidations. A comprehensive analysis investigates the impact of each treatment on the physical-chemical properties of the nanoparticles, including chemical structure, crystallinity, morphology, and thermal and suspension stability. NCs obtained through mixed acid hydrolysis exhibit the highest crystallinity (62 %) and low sulfate groups on their surfaces. Consequently, they demonstrate excellent thermal stability but poor colloidal stability in water. Oxidized NCs undergo chemical modification, converting alcoholic groups into carboxyl, resulting in NCs with zeta potentials ranging between -25.30 ± 0.81 and - 27.49 ± 1.07 mV. APS oxidation produces nanoparticles with superior thermal stability compared to TEMPO oxidation. Atomic Force Microscopy (AFM) images reveal that all nanocelluloses share characteristics of nanofibers (CNFs). This comprehensive characterization highlights the potential of acai bagasse for yielding high-added-value bioproducts suitable for versatile applications.

Cellulose nanocrystals-based materials as hemostatic agents for wound dressings: a review.

Wound dressings are devices used to stop bleeding and provide appropriate environmental conditions to accelerate wound healing. The effectiveness of wound dressing materials can be crucial to prevent deaths from excessive bleeding in surgeries and promote complete restoration of the injury. Some requirements for an ideal wound dressing are rapid hemostatic effect, high swelling capacity, antibacterial properties, biocompatibility, biodegradability, and mechanical strength. However, finding all these properties in a single material remains a challenge. In this context, nanocomposites have demonstrated an excellent capacity for this application because of their multifunctionality. One of the emerging materials used in nanocomposite manufacture is cellulose nanocrystals (CNCs), which are rod-like crystalline nanometric structures present on cellulose chains. These nanoparticles are attractive for wound healing applications because of their high aspect ratio, high mechanical properties, functionality and low density. Hence, this work aimed to present an overview of nanocomposites constituted by CNCs for wound healing applications. The review focuses on the most common materials used as matrices, the types of dressing, and their fabrication techniques. Novel wound dressings composites have improved hemostatic, swelling, and mechanical properties compared to other pure biopolymers while preserving their other biological properties. Films, nanofibers mats, sponges, and hydrogels have been prepared with CNCs nanocomposites, and in vitro and in vivo tests have proved their suitability for wound healing.

Cytotoxicity Assessment of a Poly(methyl methacrylate) Synthesized for the Direct Fabrication of Bone Tissues

ABSTRACT A cytotoxicity study is performed on a poly(methyl methacrylate) polymer (PMMA) to be used for the fabrication of bone tissue by Rapid Prototyping (RP). The solution polymerization is conducted in a pilot plant reactor using more appropriated reagents in consideration of the medical application. Moreover, the polymer is efficiently handled to avoid the side effect of the monomer, reducing the concentration of this specie to 287,731 µg MMA/kg PMMA. The cytotoxicity of the polymer is determined through growth monitoring, adherence and morphology of L-929 cells. Additionally, MTT and LIVE/DEAD tests are performed. The results showed continuous and progressive growth of the cells on the surface of the specimens. Moreover, the material did not influence on the viability of mesenchymal cells and inverted fluorescence microscopy images showed a polyanionic dye calcein well retained in the cells in contact with the PMMA as well as the negative control after 72 hours. Thus, the polymer was efficiently synthesized and handled for the expected demands.

Pilot-scale synthesis and rheological assessment of poly(methyl methacrylate) polymers: perspectives for medical application.

This work presents the rheological assessment of poly(methyl methacrylate) (PMMA) polymers synthesized in a dedicated pilot-scale plant. This material is to be used for the construction of scaffolds via Rapid Prototyping (RP). The polymers were prepared to match the physical and biological properties required for medical applications. Differential Scanning Calorimetry (DSC) and Size Exclusion Chromatography (SEC) measurements verified that the synthesized polymers were atactic, amorphous and linear in chains. Rheological properties such as viscosity, storage and loss modulus, beyond the loss factor, and creep and recovery were measured in a plate-plate sensor within the viscoelastic linear region. The results showed the relevant influence of the molecular weight on the viscosity and elasticity of the material, and how, as the molecular weight increases, the viscoelastic properties are getting closer to those of human bone. This article demonstrates that by using the implemented methodology it is possible to synthesize a polymer, with properties comparable to commercially-available PMMA.