Mechanics of myosin function in white muscle fibres of the dogfish, Scyliorhinus canicula.

The contractile properties of muscle fibres have been extensively investigated by fast perturbation in sarcomere length to define the mechanical characteristics of myofilaments and myosin heads that underpin refined models of the acto-myosin cycle. Comparison of published data from intact fast-twitch fibres of frog muscle and demembranated fibres from fast muscle of rabbit shows that stiffness of the rabbit myosin head is only ∼62% of that in frog. To clarify if and how much the mechanical characteristics of the filaments and myosin heads vary in muscles of different animals we apply the same high resolution mechanical methods, in combination with X-ray diffraction, to fast-twitch fibres from the dogfish (Scyliorhinus canicula). The values of equivalent filament compliance (C(f)) measured by X-ray diffraction and in mechanical experiments are not significantly different; the best estimate from combining these values is 17.1 ± 1.0 nm MPa(−1). This value is larger than Cf in frog, 13.0 ± 0.4 nm MPa(−1). The longer thin filaments in dogfish account for only part of this difference. The average isometric force exerted by each attached myosin head at 5°C, 4.5 pN, and the maximum sliding distance accounted for by the myosin working stroke, 11 nm, are similar to those in frog, while the average myosin head stiffness of dogfish (1.98 ± 0.31 pN nm(−1)) is smaller than that of frog (2.78 ± 0.30 pN nm(−1)). Taken together these results indicate that the working stroke responsible for the generation of isometric force is a larger fraction of the total myosin head working stroke in the dogfish than in the frog.

Probing myosin structural conformation in vivo by second-harmonic generation microscopy.

Understanding of complex biological processes requires knowledge of molecular structures and measurement of their dynamics in vivo. The collective chemomechanical action of myosin molecules (the molecular motors) in the muscle sarcomere represents a paradigmatic example in this respect. Here, we describe a label-free imaging method sensitive to protein conformation in vivo. We employed the order-based contrast enhancement by second-harmonic generation (SHG) for the functional imaging of muscle cells. We found that SHG polarization anisotropy (SPA) measurements report on the structural state of the actomyosin motors, with significant sensitivity to the conformation of myosin. In fact, each physiological/biochemical state we probed (relaxed, rigor, isometric contraction) produced a distinct value of polarization anisotropy. Employing a full reconstruction of the contributing elementary SHG emitters in the actomyosin motor array at atomic scale, we provide a molecular interpretation of the SPA measurements in terms of myosin conformations. We applied this method to the discrimination between attached and detached myosin heads in an isometrically contracting intact fiber. Our observations indicate that isometrically contracting muscle sustains its tetanic force by steady-state commitment of 30% of myosin heads. Applying SPA and molecular structure modeling to the imaging of unstained living tissues provides the basis for a generation of imaging and diagnostic tools capable of probing molecular structures and dynamics in vivo.

Structural changes in myosin motors and filaments during relaxation of skeletal muscle.

Structural changes in myosin motors and filaments during relaxation from short tetanic contractions of intact single fibres of frog tibialis anterior muscles at sarcomere length 2.14 mum, 4 degrees C were investigated by X-ray diffraction. Force declined at a steady rate for several hundred milliseconds after the last stimulus, while sarcomere lengths remained almost constant. During this isometric phase of relaxation the intensities of the equatorial and meridional M3 X-ray reflections associated with the radial and axial distributions of myosin motors also recovered at a steady rate towards their resting values, consistent with progressive net detachment of myosin motors from actin filaments. Stiffness measurements confirmed that the fraction of motors attached to actin declined at a constant rate, but also revealed a progressive increase in force per motor. The interference fine structure of the M3 reflection suggested that actin-attached myosin motors are displaced towards the start of their working stroke during isometric relaxation. There was negligible recovery of the intensities of the meridional and layer-line reflections associated with the quasi-helical distribution of myosin motors in resting muscle during isometric relaxation, and the 1.5% increase in the axial periodicity of the myosin filament associated with muscle activation was not reversed. When force had decreased to roughly half its tetanus plateau value, the isometric phase of relaxation abruptly ended, and the ensuing chaotic relaxation had an exponential half-time of ca 60 ms. Recovery of the equatorial X-ray intensities was largely complete during chaotic relaxation, but the other X-ray signals recovered more slowly than force.

The effect of myofilament compliance on kinetics of force generation by myosin motors in muscle.

We use the inhibitor of isometric force of skeletal muscle N-benzyl-p-toluene sulfonamide (BTS) to decrease, in a dose dependent way, the number of myosin motors attached to actin during the steady isometric contraction of single fibers from frog skeletal muscle (4 degrees C, 2.1 microm sarcomere length). In this way we can reduce the strain in the myofilament compliance during the isometric tetanus (T(0)) from 3.54 nm in the control solution (T(0,NR)) to approximately 0.5 nm in 1 microM BTS, where T(0) is reduced to approximately 0.15 T(0,NR). The quick force recovery after a step release (1-3 nm per half-sarcomere) becomes faster with the increase of BTS concentration and the decrease of T(0). The simulation of quick force recovery with a multistate model of force generation, that adapts Huxley and Simmons model to account for both the high stiffness of the myosin motor (approximately 3 pN/nm) and the myofilament compliance, shows that the increase in the rate of quick force recovery by BTS is explained by the reduced strain in the myofilaments, consequent to the decrease in half-sarcomere force. The model estimates that i), for the same half-sarcomere release the state transition kinetics in the myosin motor are five times faster in the absence of filament compliance than in the control; and ii), the rate of force recovery from zero to T(0) is approximately 6000/s in the absence of filament compliance.

Structural changes in the myosin filament and cross-bridges during active force development in single intact frog muscle fibres: stiffness and X-ray diffraction measurements.

Structural and mechanical changes occurring in the myosin filament and myosin head domains during the development of the isometric tetanus have been investigated in intact frog muscle fibres at 4 degrees C and 2.15 microm sarcomere length, using sarcomere level mechanics and X-ray diffraction at beamline ID2 of the European Synchrotron Radiation Facility (Grenoble, France). The time courses of changes in both the M3 and M6 myosin-based reflections were recorded with 5 ms frames using the gas-filled RAPID detector (MicroGap Technology). Following the end of the latent period (11 ms after the start of stimulation), force increases to the tetanus plateau value (T(0)) with a half-time of 40 ms, and the spacings of the M3 and M6 reflections (S(M3) and S(M6)) increase by 1.5% from their resting values, with time courses that lead that of force by approximately 10 and approximately 20 ms, respectively. These temporal relations are maintained when the increase of force is delayed by approximately 10 ms by imposing, from 5 ms after the first stimulus, 50 nm (half-sarcomere)(-1) shortening at the velocity (V(0)) that maintains zero force. Shortening at V(0) transiently reduces S(M3) following the latent period and delays the subsequent increase in S(M3), but only delays the S(M6) increase without a transient decrease. Shortening at V(0) imposed at the tetanus plateau causes an abrupt reduction of the intensity of the M3 reflection (I(M3)), whereas the intensity of the M6 reflection (I(M6)) is only slightly reduced. The changes in half-sarcomere stiffness indicate that the isometric force at each time point is proportional to the number of myosin heads bound to actin. The different sensitivities of the intensity and spacing of the M3 and M6 reflections to the mechanical responses support the view that the M3 reflection in active muscle originates mainly from the myosin heads attached to the actin filament and the M6 reflection originates mainly from a fixed structure in the myosin filament signalling myosin filament length changes during the tetanus rise.

New techniques in linear and non-linear laser optics in muscle research.

This review proposes a brief summary of two applications of lasers to muscle research. The first application (laser tweezers), is now a well-established technique in the field, adopted by several laboratories in the world and producing a constant stream of original data, fundamental for our improved understanding of muscle contraction at the level of detail that only single molecule measurements can provide. As an example of the power of this technique, here we focus on some recent results, revealing the performance of the working stroke in at least two distinct steps also in skeletal muscle myosin. A second laser-based technique described here is second-harmonic generation; the application of this technique to muscle research is very recent. We describe the main results obtained thus far in this area and the potentially remarkable impact that this technology may have in muscle research.

The structural basis of the increase in isometric force production with temperature in frog skeletal muscle.

X-ray diffraction patterns were recorded from isolated single fibres of frog skeletal muscle during isometric contraction at temperatures between 0 and 17 degrees C. Isometric force was 43 +/- 2% (mean +/- S.E.M., n = 10) higher at 17 degrees C than 0 degrees C. The intensity of the first actin layer line increased by 57 +/- 18% (n = 5), and the ratio of the intensities of the equatorial 1,1 and 1,0 reflections by 20 +/- 7% (n = 10), signalling radial or azimuthal motions of the myosin head domains. The M3 X-ray reflection from the axial repeat of the heads along the filaments was 27 +/- 4% more intense at 17 degrees C, suggesting that the heads became more perpendicular to the filaments. The ratio of the intensities of the higher and lower angle peaks of the M3 reflection (R(M3)) was 0.93 +/- 0.02 (n = 5) at 0 degrees C and 0.77 +/- 0.02 at 17 degrees C. These peaks are due to interference between the two halves of each myosin filament, and the R(M3) decrease shows that heads move towards the midpoint of the myosin filament at the higher temperature. Calculations based on a crystallographic model of the heads indicated that the observed R(M3) change corresponds to tilting of their light-chain domains by 9 deg, producing an axial displacement of 1.4 nm, which is equal to that required to strain the actin and myosin filaments under the increased force. We conclude that the higher force generated by skeletal muscle at higher temperature can be accounted for by axial tilting of the myosin heads.

The conformation of myosin head domains in rigor muscle determined by X-ray interference.

In the absence of adenosine triphosphate, the head domains of myosin cross-bridges in muscle bind to actin filaments in a rigor conformation that is expected to mimic that following the working stroke during active contraction. We used x-ray interference between the two head arrays in opposite halves of each myosin filament to determine the rigor head conformation in single fibers from frog skeletal muscle. During isometric contraction (force T(0)), the interference effect splits the M3 x-ray reflection from the axial repeat of the heads into two peaks with relative intensity (higher angle/lower angle peak) 0.76. In demembranated fibers in rigor at low force (<0.05 T(0)), the relative intensity was 4.0, showing that the center of mass of the heads had moved 4.5 nm closer to the midpoint of the myosin filament. When rigor fibers were stretched, increasing the force to 0.55 T(0), the heads' center of mass moved back by 1.1-1.6 nm. These motions can be explained by tilting of the light chain domain of the head so that the mean angle between the Cys(707)-Lys(843) vector and the filament axis increases by approximately 36 degrees between isometric contraction and low-force rigor, and decreases by 7-10 degrees when the rigor fiber is stretched to 0.55 T(0).

Temperature dependence of the force-generating process in single fibres from frog skeletal muscle.

Generation of force and shortening in striated muscle is due to the cyclic interactions of the globular portion (the head) of the myosin molecule, extending from the thick filament, with the actin filament. The work produced in each interaction is due to a conformational change (the working stroke) driven by the hydrolysis of ATP on the catalytic site of the myosin head. However, the precise mechanism and the size of the force and length step generated in one interaction are still under question. Here we reinvestigate the endothermic nature of the force-generating process by precisely determining, in tetanized intact frog muscle fibres under sarcomere length control, the effect of temperature on both isometric force and force response to length changes. We show that raising the temperature: (1) increases the force and the strain of the myosin heads attached in the isometric contraction by the same amount (approximately 70 %, from 2 to 17 degrees C); (2) increases the rate of quick force recovery following small length steps (range between -3 and 2 nm (half-sarcomere)-1) with a Q10 (between 2 and 12 degrees C) of 1.9 (releases) and 2.3 (stretches); (3) does not affect the maximum extent of filament sliding accounted for by the working stroke in the attached heads (10 nm (half-sarcomere)-1). These results indicate that in isometric conditions the structural change leading to force generation in the attached myosin heads can be modulated by temperature at the expense of the structural change responsible for the working stroke that drives filament sliding. The energy stored in the elasticity of the attached myosin heads at the plateau of the isometric tetanus increases with temperature, but even at high temperature this energy is only a fraction of the mechanical energy released by attached heads during filament sliding.

A combined mechanical and X-ray diffraction study of stretch potentiation in single frog muscle fibres.

The nature of the force (T) response during and after steady lengthening has been investigated in tetanized single muscle fibres from Rana temporaria (4 C; 2.15 micrometer sarcomere length) by determining both the intensity of the third order myosin meridional X-ray reflection (IM3) and the stiffness (e) of a selected population of sarcomeres within the fibre. With respect to the value at the isometric tetanus plateau (To), IM3 was depressed to 0.67 +/- 0.04 during steady lengthening at approximately 160 nm s(-1) (T approximately 1.7) and recovered to 0.86 +/- 0.05 during the 250 ms period of after-stretch potentiation following the rapid decay of force at the end of lengthening (T approximately 1.3); under the same conditions stiffness increased to 1.25 +/- 0.02 and to 1.12 +/- 0.03, respectively. After subtraction of the contribution of myofilaments to the half-sarcomere compliance, stiffness measurements indicated that (1) during lengthening the cross-bridge number rises to 1.8 times the original isometric value and the average degree of cross-bridge strain is similar to that induced by the force-generating process in isometric conditions (2.3 nm), and (2) after-stretch potentiation is explained by a residual larger cross-bridge number. Structural data are compatible with mechanical data if the axial dispersion of attached heads is doubled during steady lengthening and recovers half-way towards the original isometric value during after-stretch potentiation.

Interference fine structure and sarcomere length dependence of the axial x-ray pattern from active single muscle fibers.

Axial x-ray diffraction patterns from single intact fibers of frog skeletal muscle were recorded by using a highly collimated x-ray beam at the European Synchrotron Radiation Facility. During isometric contraction at sarcomere lengths 2.2-3.2 microm, the M3 x-ray reflection, associated with the repeat of myosin heads along the filaments, was resolved into two peaks. The total M3 intensity decreased linearly with increasing sarcomere length and was directly proportional to the degree of overlap between myosin and actin filaments, showing that it comes from myosin heads in the overlap region. The separation between the M3 peaks was smaller at longer sarcomere length and was quantitatively explained by x-ray interference between myosin heads in the two overlap regions of each sarcomere. The relative intensity of the M3 peaks was independent of sarcomere length, showing that the axial periodicities of the nonoverlap and overlap regions of the myosin filament have the same value, 14.57 nm, during active contraction. In resting fibers the periodicity is 14.34 nm, so muscle activation produces a change in myosin filament structure in the nonoverlap as well as the overlap part of the filament. The results establish x-ray interferometry as a new tool for studying the motions of myosin heads during muscle contraction with unprecedented spatial resolution.

Structural and biochemical properties show ARL3-GDP as a distinct GTP binding protein.

BACKGROUND: Based on sequence similarities, Arf-like (ARL) proteins have been assigned to the Arf subfamily of the superfamily of Ras-related GTP binding proteins. They have been identified in several isoforms in a wide variety of species. Their cellular function is unclear, but they are proposed to regulate intracellular transport. RESULTS: The 1.7 A crystal structure of murine ARL3-GDP provides a first insight into the structural features of this subgroup of Ar proteins. The N-terminal extension of ARL3 folds into an elongated loop region that is hydrophobically anchored onto the surface by burying 1440 A2. The features observed suggest that ARL3 releases its N terminus and undergoes a beta sheet register shift upon the binding of GTP. The structure and kinetic experiments with fluorescent mGDP demonstrate that tight GDP (but not GTP) binding is achieved in the absence of a magnesium ion. This is due to a lysine residue in the active site, close to the canonical Mg2+ site found in other GTP binding proteins. This is a distinct feature separating ARL2 and ARL3 from Arf proteins. CONCLUSION: The disturbed magnesium binding site and the independence of GDP coordination from the presence of Mg2+ separate ARL2 and ARL3 from Arf proteins. The D sheet register shift, which is similar to that of Arf, that is observed in the present structure, along with the postulated release of the N-terminal extension and the concomitant exposure of a patch of conserved hydrophobic residues in this region suggest that ARL proteins might be localized to target membranes upon exchange of GDP to GTP. Contrary to the situation in Arf, however, the conformational change to ARL-GTP does not require the presence of membranes and might thus be energetically unfavored. Together with the very low affinity described for the interaction of ARL3 with Mg-GTP, this suggests that ARL protein activation requires the presence of effectors stabilizing the GTP coordination rather than guanine nucleotide exchange factors (GEFs).

The delta subunit of rod specific cyclic GMP phosphodiesterase, PDE delta, interacts with the Arf-like protein Arl3 in a GTP specific manner.

Recently, we have shown that the delta subunit of the cGMP phosphodiesterase (PDE delta) interacts with the retinitis pigmentosa guanine regulator (RPGR). Here, using the two-hybrid system, we identify a member of the Arf-like protein family of Ras-related GTP-binding proteins, Arl3, that interacts with PDE delta. The interaction was verified by fluorescence spectroscopy and co-immunoprecipitation. Arl3 features an unusually low affinity for guanine nucleotides, with a KD of 24 nM for GDP and 48 microM for GTP. Fluorescence spectroscopy shows that PDE delta binds and specifically stabilizes the GTP-bound form of Arl3 by strongly decreasing the dissociation rate of GTP. Thus, PDE delta is an effector of Arl3 and could provide a novel nucleotide exchange mechanism by which PDE delta stabilizes Arl3 in its active GTP-bound form.

The retinitis pigmentosa GTPase regulator, RPGR, interacts with the delta subunit of rod cyclic GMP phosphodiesterase.

Recently, the retinitis pigmentosa 3 (RP3) gene has been cloned and named retinitis pigmentosa GTPase regulator (RPGR). The amino-terminal half of RPGR is homologous to regulator of chromosome condensation (RCC1), the nucleotide exchange factor for the small GTP-binding protein Ran. In a yeast two-hybrid screen we identified the delta subunit of rod cyclic GMP phosphodiesterase (PDEdelta) as interacting with the RCC1-like domain (RLD) of RPGR (RPGR392). The interaction of RPGR with PDEdelta was confirmed by pull-down assays and plasmon surface resonance. The binding affinity was determined to be 90 nM. Six missense mutations at evolutionary conserved residues within the RLD, which were found in RP3 patients, were analyzed by using the two-hybrid system. All missense mutations showed reduced interaction with PDEdelta. A non-RP3-associated missense substitution outside the RLD, V36F, did not abolish the interaction with PDEdelta. PDEdelta is widely expressed and highly conserved across evolution and is proposed to regulate the membrane insertion or solubilization of prenylated proteins, including the catalytic subunits of the PDE holoenzyme involved in phototransduction and small GTP-binding proteins of the Rab family. These results suggest that RPGR mutations give rise to retinal degeneration by dysregulation of intracellular processes that determine protein localization and protein transport.

Changes in conformation of myosin heads during the development of isometric contraction and rapid shortening in single frog muscle fibres.

1. Two-dimensional X-ray diffraction patterns were recorded at the European Synchrotron Radiation Facility from central segments of intact single muscle fibres of Rana temporaria with 5 ms time resolution during the development of isometric contraction. Shortening at ca 0.8 times the maximum velocity was also imposed at the isometric tetanus plateau. 2. The first myosin-based layer line (ML1) and the second myosin-based meridional reflection (M2), which are both strong in resting muscle, were completely abolished at the plateau of the isometric tetanus. The third myosin-based meridional reflection (M3), arising from the axial repeat of the myosin heads along the filaments, remained intense but its spacing changed from 14.34 to 14.56 nm. The intensity change of the M3 reflection, IM3, could be explained as the sum of two components, I14.34 and I14.56, arising from myosin head conformations characteristic of rest and isometric contraction, respectively. 3. The amplitudes (A) of the X-ray reflections, which are proportional to the fraction of myosin heads in each conformation, changed with half-times that were similar to that of isometric force development, which was 33.5 +/- 2. 0 ms (mean +/- s.d., 224 tetani from three fibres, 4 C), measured from the end of the latent period. We conclude that the myosin head conformation changes synchronously with force development, at least within the 5 ms time resolution of these measurements. 4. The changes in the X-ray reflections during rapid shortening have two temporal components. The rapid decrease in intensity of the 14.56 nm reflection at the start of shortening is likely to be due to tilting of myosin heads attached to actin. The slower changes in the other reflections were consistent with a return to the resting conformation of the myosin heads that was about 60 % complete after shortening of 70 nm per half-sarcomere.

Elastic bending and active tilting of myosin heads during muscle contraction.

Muscle contraction is driven by a change in shape of the myosin head region that links the actin and myosin filaments. Tilting of the light-chain domain of the head with respect to its actin-bound catalytic domain is thought to be coupled to the ATPase cycle. Here, using X-ray diffraction and mechanical data from isolated muscle fibres, we characterize an elastic bending of the heads that is independent of the presence of ATP. Together, the tilting and bending motions can explain force generation in isometric muscle, when filament sliding is prevented. The elastic strain in the head is 2.0-2.7 nm under these conditions, contributing 40-50% of the compliance of the muscle sarcomere. We present an atomic model for changes in head conformation that accurately reproduces the changes in the X-ray diffraction pattern seen when rapid length changes are applied to muscle fibres both in active contraction and in the absence of ATP. The model predictions are relatively independent of which parts of the head are assumed to bend or tilt, but depend critically on the measured values of filament sliding and elastic strain.

The stiffness of skeletal muscle in isometric contraction and rigor: the fraction of myosin heads bound to actin.

Step changes in length (between -3 and +5 nm per half-sarcomere) were imposed on isolated muscle fibers at the plateau of an isometric tetanus (tension T0) and on the same fibers in rigor after permeabilization of the sarcolemma, to determine stiffness of the half-sarcomere in the two conditions. To identify the contribution of actin filaments to the total half-sarcomere compliance (C), measurements were made at sarcomere lengths between 2.00 and 2.15 microm, where the number of myosin cross-bridges in the region of overlap between the myosin filament and the actin filament remains constant, and only the length of the nonoverlapped region of the actin filament changes with sarcomere length. At 2.1 microm sarcomere length, C was 3.9 nm T0(-1) in active isometric contraction and 2.6 nm T0(-1) in rigor. The actin filament compliance, estimated from the slope of the relation between C and sarcomere length, was 2.3 nm microm(-1) T0(-1). Recent x-ray diffraction experiments suggest that the myosin filament compliance is 1.3 nm microm(-1) T0(-1). With these values for filament compliance, the difference in half-sarcomere compliance between isometric contraction and rigor indicates that the fraction of myosin cross-bridges attached to actin in isometric contraction is not larger than 0.43, assuming that cross-bridge elasticity is the same in isometric contraction and rigor.

Myosin head movements during isometric contraction studied by X-ray diffraction of single frog muscle fibres.

Time resolved X-ray diffraction experiments in single muscle fibres of the frog at 2.15 microns sarcomere length and 4 degrees C were performed at ID2 (SAXS), ESRF, Grenoble (France) to investigate the structural aspects of cross-bridge action during the development of the isometric tetanic tension (T0). Changes in the low angle myosin-based reflections were measured with 5 ms time resolution by signal averaging data collected with a 10 m camera length and a 2D gas-filled detector. Upon activation the intensity of the first order myosin layer line reflection, I(M1), and the intensity of the second order meridional reflection, I(M2), reduced practically to zero with a half-time which leads the tension rise by 15-20 ms. The complex changes of the intensity of the third order myosin meridional reflection, I(M3), and the increase of its axial spacing from 14.34 nm (at rest) to 14.57 nm (at T0) could be analysed by assuming that they were the result of the combination of the time dependent modulation in intensity of two closely spaced periodicities, one at 14.34 nm, characteristics of the myosin molecule at rest and the other at 14.57 nm, assumed by the myosin as a consequence of the activation and force production. I(14.34) drops monotonically in advance to isometric tension development with a half-time similar to that of I(M1) and I(M2), while I(14.57) rises from zero to a maximum in parallel with tension.

Cross-bridge kinetics studied with staircase shortening in single fibres from frog skeletal muscle.

The kinetics of actin-myosin interaction has been studied in single active muscle fibres by repetitively eliciting tension transients with staircase shortening, consisting in a sequence of step releases of identical size (1-5 nm per half-sarcomere) imposed at regular time intervals (3-11 ms). Under sarcomere length-clamp conditions, the quick phase of tension recovery following each step in the staircase is the manifestation of the working stroke by synchronized cross-bridges. Different average shortening velocities are obtained by varying both the size of the step and the time interval between steps. Ti, the tension just before each step in the sequence, T2, the tension attained at the end of the quick phase of tension recovery, decrease with the number of steps, reaching a steady state value, which is lower the larger the shortening velocity. In agreement with previous results on tension response to steady shortening, the overall shortening necessary to approach the steady state values of Ti and T2 is about 15 nm. The normalized amplitude of quick tension recovery (T2r), which is measured by the ratio of the amount of tension recovered at the end of the quick phase (T2-T1) over the tension drop simultaneous with the step (Ti-T1), has been used to measure the extent of the working stroke elicited by each step in the staircase. The steady state value of T2r decreases progressively with the increase of shortening velocity. At velocities higher than 0.5 microns s-1 per half-sarcomere the steady state value of T2r is attained after a transitory depression, which reaches a maximum for an amount of overall shortening increasing from about 8 nm up to about 13 nm with increase in shortening velocity from 0.5 to 1.4 microns s-1 per half-sarcomere. The velocity-dependent transitory depression of T2r can be explained with the mechanical-kinetic model described previously. In the model cross-bridges cycle through two pathway distinct for the kinetics of the detachment/reattachment process. Shortening promotes a redistribution of cross-bridges interacting in the isometric conditions among the various states of the force-generating process. Shortening at high speed, preventing most of cross-bridges from undergoing the relatively fast (100 s-1) detachment/reattachment process, uncovers a rate limiting step in the cycle at the end of the 12 nm working stroke. Under these conditions, the finding that the fraction of the working stroke elicited by each step is transitory depressed with respect to the steady state value reveals that in the original isometric state a large fraction of interacting cross-bridges was accumulated near the beginning of the working stroke.