Return to the Moon: New perspectives on lunar exploration.

Lunar exploration is deemed crucial for uncovering the origins of the Earth-Moon system and is the first step for advancing humanity's exploration of deep space. Over the past decade, the Chinese Lunar Exploration Program (CLEP), also known as the Chang'e (CE) Project, has achieved remarkable milestones. It has successfully developed and demonstrated the engineering capability required to reach and return from the lunar surface. Notably, the CE Project has made historic firsts with the landing and on-site exploration of the far side of the Moon, along with the collection of the youngest volcanic samples from the Procellarum KREEP Terrane. These achievements have significantly enhanced our understanding of lunar evolution. Building on this success, China has proposed an ambitious crewed lunar exploration strategy, aiming to return to the Moon for scientific exploration and utilization. This plan encompasses two primary phases: the first crewed lunar landing and exploration, followed by a thousand-kilometer scale scientific expedition to construct a geological cross-section across the lunar surface. Recognizing the limitations of current lunar exploration efforts and China's engineering and technical capabilities, this paper explores the benefits of crewed lunar exploration while leveraging synergies with robotic exploration. The study refines fundamental lunar scientific questions that could lead to significant breakthroughs, considering the respective engineering and technological requirements. This research lays a crucial foundation for defining the objectives of future lunar exploration, emphasizing the importance of crewed missions and offering insights into potential advancements in lunar science.

Perovskite Single Crystals by Vacuum Evaporation Crystallization.

Perovskite single crystals have attracted tremendous attention owing to their excellent optoelectronic properties and stability compared to typical multicrystal structures. However, the growth of high-quality perovskite single crystals (PSCs) generally relies on temperature gradients or the introduction of additives to promote crystal growth. In this study, a vacuum evaporation crystallization technique is developed that allows PSCs to be grown under extremely stable conditions at constant temperature and without requiring additives to promote crystal growth. The new method enables the growth of PSCs of unprecedented quality, that is, MAPbBr3 single crystals that exhibit an ultranarrow full width at half maximum of 0.00701°, which surpasses that of all previously reported values. In addition, the MAPbBr3 single crystals deliver exceptional optoelectronic performance, including a long carrier lifetime of 1006 ns, an ultralow trap-state density of 3.67 × 109 cm-3, and an ultrahigh carrier mobility of 185.86 cm2 V-1 s-1. This method is applicable to various types of PSCs, including organic-inorganic hybrids, fully inorganic structures, and low-dimensional structures.

Solid-gas carbonate formation during dust events on Mars.

Electrostatic discharge experiments under simulated martian atmospheric conditions indicate that atmospheric CO2 has been sequestered into carbonate by the Mars dust activities during the Amazonia era.

A Remote Raman System and Its Applications for Planetary Material Studies.

A remote Raman prototype with a function of excitation energy adjusting for the purpose of obtaining a Raman signal with good signal-to-noise ratio (SNR), saving power consumption, and possibly avoiding destroying a target by high energy pulses, which may have applications for Chinese planetary explorations, has been setup and demonstrated for detecting different minerals. The system consists of a spectrograph equipped with a thermoelectrically cooled charge-coupled device (CCD) detector, a telescope with 150 mm diameter and 1500 mm focus length, and a compact 1064 nm Nd:YAG Q-switched laser with an electrical adjusted pulse energy from 0 to 200 mJ/pulse. A KTP crystal was used for second harmonic generation in a 1064 nm laser to generate a 532 nm laser, which is the source of Raman scatting. Different laser pulse energies and integration time were used to obtain distinguishable remote Raman spectra of various samples. Results show that observed remote Raman spectra at a distance of 4 m enable us to identify silicates, carbonates, sulfates, perchlorates, water/water ice, and organics that have been found or may exist on extraterrestrial planets. Detailed Raman spectral assignments of the measured planetary materials and the feasible applications of remote Raman system for planetary explorations are discussed.

Rapid detection of Chinese-specific peony seed oil by using confocal Raman spectroscopy and chemometrics.

Peony seed oil (PSO) is a new woody nut oil which is unique to China. Its unsaturated fatty acids are over 90% and are rich in α - linolenic acid. Although the PSO industry is in its infancy, it is bound to become a top vegetable oil food material because of its own advantages. The potential high commercial profit of its adulteration with cheap vegetable oil will be an important factor hindering the healthy development of PSO industry. It is of great significance to study the adulteration of PSO for preventing large-scale adulteration. In this study, the qualitative and quantitative analysis of PSO was realised based on Raman spectroscopy combined with chemometrics analysis, and the fatty acid composition of PSO was analysed according to Raman characteristic peaks. The technology can be applied to routine analysis and quality control of PSO.

Elastic Particle Swarm Optimization for MarSCoDe Spectral Calibration on Tianwen-1 Mars Rover.

China's Tianwen-1 Mars rover carries a laser-induced breakdown spectroscopy (LIBS) payload named MarSCoDe to analyze the mineral and rock composition on Mars. MarSCoDe is expected to experience a wide working temperature range of about 100 °C, which will lead to a spectral shift of up to ∼40 pixels (∼8.13 nm). Even worse, drastic changes in temperature and environment may cause a loss or increase of some spectral lines of an on-board calibration Ti target. An elastic particle swarm optimization (PSO) approach is proposed to fulfill the on-board spectral calibration of MarSCoDe under this harsh condition. Through establishing a standard wavelength set (SWS) and an individual particle wavelength set (PWS), and further elastically selecting a part of PWS to compare with SWS, the problem of spectral shift and number mismatch can be solved gradually with the evolution of the particle swarm. Some tests of standard lamps and Ti with MarSCoDe, placed in a Mars simulation environment chamber (MSEC) in a temperature range of 70 °C, were completed. Compared with the standard spectrum of the Ti target (obtained at 20 °C), the spectral shifts of the first, second, and third channels are approximately 0.33 nm (5 pixels), 0.85 nm (6.4 pixels), and 8.09 nm (39.8 pixels), respectively, at -40 °C before correction; after PSO correction, the spectral shifts are greatly reduced to up to 0.015 nm, and specially for the 626.28 nm line, the spectral shift is reduced from 8.09 nm to about 0 nm. Experimental results demonstrate that the PSO-based approach can not only correct the on-board spectral shift but also solve the number mismatch of spectral lines of MarSCoDe in the harsh working environment of Mars. Further, it can be extended to the on-board calibration of other spectral payloads for deep space exploration.

Dynamic confocal Raman spectroscopy of flowing blood in bionic blood vessel.

How to quickly and safely identify blood species has always been an urgent problem for scientists. Smear test method has the risk of blood contamination, and the blood itself may carry some unknown viruses or pathogens, which will bring health risks to the testing personnel. Therefore, in order to meet the urgent needs of rapid and safe detection of blood, a technology which can detect dynamic confocal Raman spectroscopy of flowing blood in bionic blood vessel was proposed. The blood, which was sealed in the bionic blood vessel, flowed through the focus gaze area of laser by the microfluidic pump, to detect the dynamic blood Raman spectrum. Human blood and cattle blood were selected as experimental objects, and the experiments were carried out under the same parameters. Combined with PCA-LDA (principal component analysis and linear discriminate analysis) classification model, the predictive classification of the two species without error recognition was realized. The hidden weak Raman signals were mined by derivative spectra, and the fundamental differences of Raman spectra of two species were compared. Then the biochemical information that caused the differences was also analyzed. The results show the method can meet the detection requirements of sealed blood, and the Raman spectra of flowing blood is more representative than those of static blood.

A Mars Environment Chamber Coupled with Multiple In Situ Spectral Sensors for Mars Exploration.

Laboratory simulation is the only feasible way to achieve Martian environmental conditions on Earth, establishing a key link between the laboratory and Mars exploration. The mineral phases of some Martian surface materials (especially hydrated minerals), as well as their spectral features, are closely related to environmental conditions. Therefore, Martian environment simulation is necessary for Martian mineral detection and analysis. A Mars environment chamber (MEC) coupled with multiple in situ spectral sensors (VIS (visible)-NIR (near-infrared) reflectance spectroscopy, Raman spectroscopy, laser-induced breakdown spectroscopy (LIBS), and UV-VIS emission spectroscopy) was developed at Shandong University at Weihai, China. This MEC is a comprehensive research platform for Martian environmental parameter simulation, regulation, and spectral data collection. Here, the structure, function and performance of the MEC and the coupled spectral sensors were systematically investigated. The spectral characteristics of some geological samples were recorded and the effect of environmental parameter variations (such as gas pressure and temperature) on the spectral features were also acquired by using the in situ spectral sensors under various simulated Martian conditions. CO2 glow discharge plasma was generated and its emission spectra were assigned. The MEC and its tested functional units worked well with good accuracy and repeatability. China is implementing its first Mars mission (Tianwen-1), which was launched on 23 July 2020 and successfully entered into a Mars orbit on 10 February 2021. Many preparatory works such as spectral databases and prediction model building are currently underway using MECs, which will help us build a solid foundation for real Martian spectral data analysis and interpretation.

Correlated compositional and mineralogical investigations at the Chang'e-3 landing site.

The chemical compositions of relatively young mare lava flows have implications for the late volcanism on the Moon. Here we report the composition of soil along the rim of a 450-m diameter fresh crater at the Chang'e-3 (CE-3) landing site, investigated by the Yutu rover with in situ APXS (Active Particle-induced X-ray Spectrometer) and VNIS (Visible and Near-infrared Imaging Spectrometer) measurements. Results indicate that this region's composition differs from other mare sample-return sites and is a new type of mare basalt not previously sampled, but consistent with remote sensing. The CE-3 regolith derived from olivine-normative basaltic rocks with high FeO/(FeO+MgO). Deconvolution of the VNIS data indicates abundant high-Ca ferropyroxene (augite and pigeonite) plus Fe-rich olivine. We infer from the regolith composition that the basaltic source rocks formed during late-stage magma-ocean differentiation when dense ferropyroxene-ilmenite cumulates sank and mixed with deeper, relatively ferroan olivine and orthopyroxene in a hybridized mantle source.

[Raman spectra analysis of DKDP crystal].

Based on the space group theory, the normal vibration modes of DKDP crystal were analyzed and the assigned. Raman spectra were measured at the room temperature. Results show that the lattice vibration spectra of DKDP arise mainly from the internal vibrations of D2PO4(-) anionic cluster. Compared with the Raman spectra of an aqueous solution of KH2PO4 and an NaD2(PO4)2 crystal, the four internal vibration models of the D2PO4(-) in DKDP were assigned as 881 cm(-1) (v1), 357 cm(-1) (v2), 514/541 cm(-1) (v3), 965 cm(-1) (v4), respectively.