Finite element modeling to predict the influence of anatomic variation and implant placement on performance of biological intervertebral disc implants.

Background: Tissue-engineered intervertebral disc (TE-IVD) constructs are an attractive therapy for treating degenerative disc disease and have previously been investigated in vivo in both large and small animal models. The mechanical environment of the spine is notably challenging, in part due to its complex anatomy, and implants may require additional mechanical support to avoid failure in the early stages of implantation. As such, the design of suitable support implants requires rigorous validation. Methods: We created a FE model to simulate the behavior of the IVD cages under compression specific to the anatomy of the porcine cervical spine, validated the FE model using an animal model, and predicted the effects of implant location and vertebral angle of the motion segment on implant behavior. Specifically, we tested anatomical positioning of the superior vertebra and placement of the implant. We analyzed corresponding stress and strain distributions. Results: Results demonstrated that the anatomical geometry of the porcine cervical spine led to concentrated stress and strain on the posterior side of the cage. This stress concentration was associated with the location of failure of the cages reported in vivo, despite superior mechanical properties of the implant. Furthermore, placement of the cage was found to have profound effects on migration, while the angle of the superior vertebra affected stress concentration of the cage. Conclusions: This model can be utilized both to inform surgical procedures and provide insight on future cage designs and can be adopted to models without the use of in vivo animal models.

The degenerative impact of hyperglycemia on the structure and mechanics of developing murine intervertebral discs.

Introduction: Diabetes has long been implicated as a major risk factor for intervertebral disc (IVD) degeneration, interfering with molecular signaling and matrix biochemistry, which ultimately aggravates the progression of the disease. Glucose content has been previously shown to influence structural and compositional changes in engineered discs in vitro, impeding fiber formation and mechanical stability. Methods: In this study, we investigated the impact of diabetic hyperglycemia on young IVDs by assessing biochemical composition, collagen fiber architecture, and mechanical behavior of discs harvested from 3- to 4-month-old db/db mouse caudal spines. Results: We found that discs taken from diabetic mice with elevated blood glucose levels demonstrated an increase in total glycosaminoglycan and collagen content, but comparable advanced glycation end products (AGE) levels to wild-type discs. Diabetic discs also contained ill-defined boundaries between the nucleus pulposus and annulus fibrosus, with the latter showing a disorganized and unaligned collagen fiber network at this same boundary. Conclusions: These compositional and structural changes had a detrimental effect on function, as the diabetic discs were twice as stiff as their wild-type counterparts and demonstrated a significant resistance to deformation. These results indicate that diabetes may predispose the young disc to DDD later in life by altering patterns of extracellular matrix deposition, fiber formation, and motion segment mechanics independently of AGE accumulation.

Innovative Biological Treatment Methods for Degenerative Disc Disease.

Low back pain is the leading cause of work absences and years lived with disability, and it is often associated with degenerative disc disease. In recent years, biological treatment approaches such as the use of growth factors, cell injections, annulus fibrosus (AF) repair, nucleus pulposus replacement, and tissue-engineered discs have been explored as means for preventing or reversing degenerative disc disease. Both animal and clinical studies have shown promising results for cell-based therapy on the grounds of its regenerative potential. Clinical data also indicate that stem cell injection is safe when appropriately performed, albeit its long-term safety and efficacy are yet to be explored. Numerous challenges also remain to be overcome, such as isolating, differentiating, and preconditioning the disc cells, as well as managing the nutrient-deficient and oxygen-deficient micromilieu of the intervertebral disc (IVD). AF repair methods including devices used in clinical trials have shown success in decreasing reherniation rates and improving overall clinical outcomes. In addition, recent studies that combined AF repair and nucleus pulposus replacement have shown improved biomechanical stability in IVDs after the combined treatment. Tissue-engineered IVDs for total disc replacement are still being developed, and future studies are necessary to overcome the challenges in their delivery, efficacy, and safety.

Pathomechanism and Biomechanics of Degenerative Disc Disease: Features of Healthy and Degenerated Discs.

The human intervertebral disc (IVD) is a complex organ composed of fibrous and cartilaginous connective tissues, and it serves as a boundary between 2 adjacent vertebrae. It provides a limited range of motion in the torso as well as stability during axial compression, rotation, and bending. Adult IVDs have poor innate healing potential due to low vascularity and cellularity. Degenerative disc disease (DDD) generally arises from the disruption of the homeostasis maintained by the structures of the IVD, and genetic and environmental factors can accelerate the progression of the disease. Impaired cell metabolism due to pH alteration and poor nutrition may lead to autophagy and disruption of the homeostasis within the IVD and thus plays a key role in DDD etiology. To develop regenerative therapies for degenerated discs, future studies must aim to restore both anatomical and biomechanical properties of the IVDs. The objective of this review is to give a detailed overview about anatomical, radiological, and biomechanical features of the IVDs as well as discuss the structural and functional changes that occur during the degeneration process.

Molecular transport in articular cartilage - what have we learned from the past 50 years?

Developing therapeutic molecules that target chondrocytes and locally produced inflammatory factors within arthritic cartilage is an active area of investigation. The extensive studies that have been conducted over the past 50 years have enabled the accurate prediction and reliable optimization of the transport of a wide variety of molecules into cartilage. In this Review, the factors that can be used to tune the transport kinetics of therapeutics are summarized. Overall, the most crucial factor when designing new therapeutic molecules is solute size. The diffusivity and partition coefficient of a solute both decrease with increasing solute size as indicated by molecular mass or by hydrodynamic radius. Surprisingly, despite having an effective pore size of ~6 nm, molecules of ~16 nm radius can diffuse through the cartilage matrix. Alteration of the shape or charge of a solute and the application of physiological loading to cartilage can be used to predictably improve solute transport kinetics, and this knowledge can be used to improve the development of therapeutic agents for osteoarthritis that target the cartilage.

Biologic Annulus Fibrosus Repair: A Review of Preclinical In Vivo Investigations.

Lower back pain, the leading cause of workplace absences and disability, is often attributed to intervertebral disc degeneration, in which nucleus pulposus (NP) herniates through lesions in the annulus fibrosus (AF) and impinges on the spinal cord and surrounding nerves. Surgeons remove extruded NP via discectomy when indicated by local/radicular pain supported by radiographic evidence; however, current interventions do not alter the underlying disease or seal the AF. The reported rates of recurrent herniation or pain following discectomy cases range from 5% to 25%, which has pushed spine research in recent years toward annular repair and closure strategies. Synthetic implants designed to mechanically seal the AF have been subject to large animal and clinical trials, with limited success in preventing recurrent herniation. Like gold standard interventions, purely mechanical devices fail to promote tissue integration, long-term healing, or restore native biomechanical function to the spine. Biological repair strategies utilizing principles of tissue engineering have demonstrated success in overcoming the inadequacies of current interventions and mechanical implants, yet, none has reached clinical or proof-of-concept trials in humans. In this review, we will discuss annular repair strategies promoting biological healing that have been implemented in small and large animal models in vivo, and ways to enhance the efficacy of these treatments.

The Mechanics of Single Cell and Collective Migration of Tumor Cells.

Metastasis is a dynamic process in which cancer cells navigate the tumor microenvironment, largely guided by external chemical and mechanical cues. Our current understanding of metastatic cell migration has relied primarily on studies of single cell migration, most of which have been performed using two-dimensional (2D) cell culture techniques and, more recently, using three-dimensional (3D) scaffolds. However, the current paradigm focused on single cell movements is shifting toward the idea that collective migration is likely one of the primary modes of migration during metastasis of many solid tumors. Not surprisingly, the mechanics of collective migration differ significantly from single cell movements. As such, techniques must be developed that enable in-depth analysis of collective migration, and those for examining single cell migration should be adopted and modified to study collective migration to allow for accurate comparison of the two. In this review, we will describe engineering approaches for studying metastatic migration, both single cell and collective, and how these approaches have yielded significant insight into the mechanics governing each process.