Assessing progressive changes in axial plane vertebral deformity in adolescent idiopathic scoliosis using sequential magnetic resonance imaging.

PURPOSE: To understand how the axial plane deformity contributes to progression of the three-dimensional spinal deformity of Adolescent Idiopathic Scoliosis (AIS), with a main thoracic curve type, using a series of sequential magnetic resonance images (MRI). METHODS: Twenty-seven AIS patients (at scan 1: mean 12.4 years (± 1.5), mean Cobb angle 29.1°(± 8.8°)) had 3 MRI scans (T4-L1) performed at intervals of mean 0.7 years (± 0.4). The outer profile of the superior and inferior endplates were traced on a reformatted axial image using ImageJ (NIH). Endplate AVR, and intravertebral rotation (IVR), defined as the difference between superior and inferior endplate AVR, was calculated for each vertebral level. RESULTS: For all patients and scans, the mean AVR was greatest at the curve apex, with AVR diminishing in a caudal and cephalic direction from the apex. At scan 3 the mean apical AVR was 15.1°(± 4.6°) with a mean change in apical AVR between MRI 1 and 3 of 2.7°(± 2.9°). The increase in standing height between MRI 1 and 3 was mean 7.4 cm (± 4.6). Linear regression showed a positive correlation between apical AVR and Cobb angle (R2 = 0.57, P < 0.001), and a positive correlation between apical AVR and rib hump (R2 = 0.54, p < 0.001). The mean change in IVR was greater 3 vertebral levels cephalic and caudal to the apex (1.4°(± 4.1°) and 1.2°(± 2.0°), respectively), compared to the apex (0.4°(± 3.1°)). CONCLUSIONS: AVR increased, during curve progression, most markedly at the curve apex. The greatest IVR was observed at the periapical levels, with the apex by contrast having only a modest degree of rotation, suggesting the periapical vertebral levels of the scoliosis deformity may be a significant driver in the progression of AIS.

Engineering the perfect mattress: The influence of substrate mechanics on deep tissue stresses in supine.

BACKGROUND: With increasing global interest in sleep hygiene, sleep ergonomics is an area that has been largely understudied. During sleep individuals turn over during the night to restore blood flow in occluded blood vessels, indicating that control of local tissue pressure may play a role in improving sleep comfort. This study investigates the influence of mattress stiffness on tissue compressive stresses during supine lying. METHODS: A subject-specific 3D finite element (FE) model of the pelvis area has been developed to simulate supine lying on substrates of varying firmness. Constitutive parameters for the adipose-skin tissue and muscle-organ tissue were calibrated using a novel application of the inverse finite element method. FINDINGS: The compressive stress was consistently greatest in the muscle interfacing the sacrum at 18.5 kPa on the soft foam, and 30.9 kPa on the firm foam. From soft to firm, the compressive stress increased by 67% at the sacrum, 20% at the ischium, 42% at the lesser trochanter, and 50% at the skin. INTERPRETATION: The non-linearity of the foam substrate had a pressure distributing effect, relieving the peak compressive stresses at the sacrum, indicating that it may be possible to design arrays of foam substrates that can provide most efficient pressure relief.

Quantifying Typical Progression of Adolescent Idiopathic Scoliosis: Longitudinal Three-Dimensional MRI Measures of Disk and Vertebral Deformities.

STUDY DESIGN: A prospective cohort study. OBJECTIVE: Detail typical three-dimensional segmental deformities and their rates of change that occur within developing adolescent idiopathic scoliosis (AIS) spines over multiple timepoints. SUMMARY OF BACKGROUND DATA: AIS is a potentially progressive deforming condition that occurs in three dimensions of the scoliotic spine during periods of growth. However, there remains a gap for multiple timepoint segmental deformity analysis in AIS cohorts during development. MATERIALS AND METHODS: Thirty-six female patients with Lenke 1 AIS curves underwent two to six sequential magnetic resonance images. Scans were reformatted to produce images in orthogonal dimensions. Wedging angles and rotatory values were measured for segmental elements within the major curve. Two-tailed, paired t tests compared morphologic differences between sequential scans. Rates of change were calculated for variables given the actual time between successive scans. Pearson correlation coefficients were determined for multidimensional deformity measurements. RESULTS: Vertebral bodies were typically coronally convexly wedged, locally lordotic, convexly axially rotated, and demonstrated evidence of local mechanical torsion. Between the first and final scans, apical measures of coronal wedging and axial rotation were all greater in both vertebral and intervertebral disk morphology than nonapical regions (all reaching differences where P <0.05). No measures of sagittal deformity demonstrated a statistically significant change between scans. Cross-planar correlations were predominantly apparent between coronal and axial planes, with sagittal plane parameters rarely correlating across dimensions. Rates of segmental deformity changes between earlier scans were characterized by coronal plane convex wedging and convexly directed axial rotation. The major locally lordotic deformity changes that did occur in the sagittal plane were static between scans. CONCLUSIONS: This novel investigation documented a three-dimensional characterization of segmental elements of the growing AIS spine and reported these changes across multiple timepoints. Segmental elements are typically deformed from initial presentation, and subsequent changes occur in separate orthogonal planes at unique times.

Vertebral body tethering for idiopathic scoliosis: a systematic review and meta-analysis.

PURPOSE: Vertebral body tethering (VBT) is a recent procedure to correct and reduce spinal curves in skeletally immature patients with adolescent idiopathic scoliosis (AIS). The purpose of this systematic review and meta-analysis is to determine the expected curve reduction and potential complications for adolescent patients after VBT. METHODS: PubMed, Embase, Google Scholar and Cochrane databases were searched until February 2022. Records were screened against pre-defined inclusion and exclusion criteria. Data sources were prospective and retrospective studies. Demographics, mean differences in Cobb angle, surgical details and complication rates were recorded. Meta-analysis was conducted using a random-effects model. RESULTS: This systematic review includes 19 studies, and the meta-analysis includes 16 of these. VBT displayed a statistically significant reduction in Cobb angle from pre-operative to final (minimum 2 years) measurements. The initial mean Cobb angle was 47.8° (CI 95% 42.9-52.7°) and decreased to 22.2° (CI 95% 19.9-24.5°). The mean difference is - 25.8° (CI 95% - 28.9-22.7) (p < 0.01). The overall complication rate was 23% (CI 95% 14.4-31.6%), the most common complication was tether breakage 21.9% (CI 95% 10.6-33.1%). The spinal fusion rate was 7.2% (CI 95% 2.3-12.1%). CONCLUSION: VBT results in a significant reduction of AIS at 2 years of follow-up. Overall complication rate was relatively high although the consequences of the complications are unknown. Further research is required to explore the reasons behind the complication rate and determine the optimal timing for the procedure. VBT remains a promising new procedure that is effective at reducing scoliotic curves and preventing spinal fusion in the majority of patients. LEVEL OF EVIDENCE: Systematic review of Therapeutic Studies with evidence level II-IV.

Quantifying Muscle Size Asymmetry in Adolescent Idiopathic Scoliosis Using Three-dimensional Magnetic Resonance Imaging.

STUDY DESIGN: This is a case-control study of prospectively collected data. OBJECTIVE: To quantify paraspinal muscle size asymmetry in adolescent idiopathic scoliosis (AIS) and determine if this asymmetry is (i) greater than observed in adolescent controls with symmetrical spines; and (ii) positively associated with skeletal maturity using Risser grade, scoliosis severity using the Cobb angle, and chronological age in years. SUMMARY OF BACKGROUND DATA: AIS is a three-dimensional deformity of the spine which occurs in 2.5% to 3.7% of the Australian population. There is some evidence of asymmetry in paraspinal muscle activation and morphology in AIS. Asymmetric paraspinal muscle forces may facilitate asymmetric vertebral growth during adolescence. METHODS: An asymmetry index [Ln(concave/convex volume)] of deep and superficial paraspinal muscle volumes, at the level of the major curve apex (Thoracic 8-9 th vertebral level) and lower-end vertebrae ( LEV , Thoracic 10-12 th vertebral level), was determined from three-dimensional Magnetic Resonance Imaging of 25 adolescents with AIS (all right thoracic curves), and 22 healthy controls (convex=left); all female, 10 to 16 years. RESULTS: Asymmetry index of deep paraspinal muscle volumes was greater in AIS (0.16±0.20) than healthy spine controls (-0.06±0.13) at the level of the apex ( P <0.01, linear mixed-effects analysis) but not LEV ( P >0.05). Asymmetry index was positively correlated with Risser grade ( r =0.50, P <0.05) and scoliosis Cobb angle ( r =0.45, P <0.05), but not age ( r =0.34, P >0.05). There was no difference in the asymmetry index of superficial paraspinal muscle volumes between AIS and controls ( P >0.05). CONCLUSIONS: The asymmetry of deep apical paraspinal muscle volume in AIS at the scoliosis apex is greater than that observed at equivalent vertebral levels in controls and may play a role in the pathogenesis of AIS.

Development and validation of a semi-automated measurement tool for calculating consistent and reliable surface metrics describing cosmesis in Adolescent Idiopathic Scoliosis.

Adolescent Idiopathic Scoliosis (AIS) is a 3D spine deformity that also causes ribcage and torso distortion. While clinical metrics are important for monitoring disorder progression, patients are often most concerned about their cosmesis. The aim of this study was to automate the quantification of AIS cosmesis metrics, which can be measured reliably from patient-specific 3D surface scans (3DSS). An existing database of 3DSS for pre-operative AIS patients treated at the Queensland Children's Hospital was used to create 30 calibrated 3D virtual models. A modular generative design algorithm was developed on the Rhino-Grasshopper software to measure five key AIS cosmesis metrics from these models-shoulder, scapula and hip asymmetry, torso rotation and head-pelvis shift. Repeat cosmetic measurements were calculated from user-selected input on the Grasshopper graphical interface. InterClass-correlation (ICC) was used to determine intra- and inter-user reliability. Torso rotation and head-pelvis shift measurements showed excellent reliability (> 0.9), shoulder asymmetry measurements showed good to excellent reliability (> 0.7) and scapula and hip asymmetry measurements showed good to moderate reliability (> 0.5). The ICC results indicated that experience with AIS was not required to reliably measure shoulder asymmetry, torso rotation and head-pelvis shift, but was necessary for the other metrics. This new semi-automated workflow reliably characterises external torso deformity, reduces the dependence on manual anatomical landmarking, and does not require bulky/expensive equipment.

Predicting spinal column profile from surface topography via 3D non-contact surface scanning.

INTRODUCTION: 3D Non-Contact surface scanning (3DSS) is used in both biomechanical and clinical studies to capture accurate 3D images of the human torso, and to better understand the shape and posture of the spine-both healthy and pathological. This study sought to determine the efficacy and accuracy of using 3DSS of the posterior torso, to determine the curvature of the spinal column in the lateral lying position. METHODS: A cohort of 50 healthy adults underwent 3DSS and Magnetic Resonance Imaging (MRI) to correlate the contours of the external spine surface with the internal spinal column. The correlation analysis was composed of two phases: (1) MRI vertebral points vs MRI external spine surface markers; and (2) MRI external spine surface markers vs 3DSS external spine surface markers. The first phase compared the profiles of fiducial markers (vitamin capsules) adhered to the skin surface over the spinous processes against the coordinates of the spinous processes-assessing the linear distance between the profiles, and similarity of curvature, in the sagittal and coronal planes. The second phase compared 3DSS external spine surface markers with the MRI external spine surface markers in both planes, with further qualitative assessment for postural changes. RESULTS: The distance between the MRI vertebral points and MRI external spine surface markers showed strong statistically significant correlation with BMI in both sagittal and coronal planes. Kolmogorov-Smirnov (KS) tests showed similar no significant difference in curvature, k, in almost all participants on both planes. In the second phase, the coronal 3DSS external spine surface profiles were statistically different to the MRI external spine surface markers in 44% of participants. Qualitative assessment showed postural changes between MRI and 3DSS measurements in these participants. CONCLUSION: These study findings demonstrate the utility and accuracy of using anatomical landmarks overlaid on the spinous processes, to identify the position of the spinal bones using 3DSS. Using this method, it will be possible to predict the internal spinal curvature from surface topography, provided that the thickness of the overlaying subcutaneous adipose layer is considered, thus enabling postural analysis of spinal shape and curvature to be carried out in biomechanical and clinical studies without the need for radiographic imaging.

Effects of geometric individualisation of a human spine model on load sharing: neuro-musculoskeletal simulation reveals significant differences in ligament and muscle contribution.

In spine research, two possibilities to generate models exist: generic (population-based) models representing the average human and subject-specific representations of individuals. Despite the increasing interest in subject specificity, individualisation of spine models remains challenging. Neuro-musculoskeletal (NMS) models enable the analysis and prediction of dynamic motions by incorporating active muscles attaching to bones that are connected using articulating joints under the assumption of rigid body dynamics. In this study, we used forward-dynamic simulations to compare a generic NMS multibody model of the thoracolumbar spine including fully articulated vertebrae, detailed musculature, passive ligaments and linear intervertebral disc (IVD) models with an individualised model to assess the contribution of individual biological structures. Individualisation was achieved by integrating skeletal geometry from computed tomography and custom-selected muscle and ligament paths. Both models underwent a gravitational settling process and a forward flexion-to-extension movement. The model-specific load distribution in an equilibrated upright position and local stiffness in the L4/5 functional spinal unit (FSU) is compared. Load sharing between occurring internal forces generated by individual biological structures and their contribution to the FSU stiffness was computed. The main finding of our simulations is an apparent shift in load sharing with individualisation from an equally distributed element contribution of IVD, ligaments and muscles in the generic spine model to a predominant muscle contribution in the individualised model depending on the analysed spine level.

A subject-specific FEM to predict deep tissue mechanical stresses when supine: Development of efficient contact interfaces using Shared Topology.

Prior studies have demonstrated Finite Element (FE) analysis is a useful tool when analysing the complex interplay of tissue and body loads which act through the human pelvis in a subject lying supine. The computational accuracy and efficiency of FE models that contain complex non-linear geometric interfaces between different anatomical and tissue regions can be compromised by superfluous node interactions and contact penetrations. This study proposes a method for the development of efficient contact definitions using shared topology. The Shared Topology Finite Element Model (FEM) resulted in a 37% reduction in solution time compared to an equivalent FEM defined with Bonded contact. At all tissue interfaces, contact penetration occurred in the Bonded FEM, with subsequent under-prediction of peak compressive strains and stresses by 1-7% compared to the Shared Topology FEM. Simulating supine lying of a 19-year-old male, the Shared Topology FEM predicted peak compressive stress in the muscle interfacing the sacrum of 29.4 kPa, and peak compressive strain of 50%. The proposed methodology can be applied for any medical imaging derived FEM where there are multiple congruent 3D geometries with negligible sliding across interfaces.

Adolescent idiopathic scoliosis 3D vertebral morphology, progression and nomenclature: a current concepts review.

PURPOSE: There has been a recent shift toward the analysis of the pathoanatomical variation of the adolescent idiopathic scoliosis (AIS) spine with the three dimensions, and research of level-wise vertebral body morphology in single anatomical planes is now replete within the field. In addition to providing a precise description of the osseous structures that are the focus of instrumented surgical interventions, understanding the anatomical variation between vertebral bodies will elucidate possible pathoaetiological mechanisms of the onset of scoliotic deformity. METHODS: This review aimed to discuss the current landscape of AIS segmental vertebral morphology research and provide a comprehensive report of the typical patterns observed at the individual vertebral level. RESULTS: We have detailed how these vertebrae are typically characterised by lateral wedging to the convexity, have a marked degree of anterior overgrowth, are rotated towards the convexity, have inherent gyratory mechanical torsion created within them and are associated with pedicles on the concave side being narrower, longer and more laterally angled. For the most part, these findings are most pronounced at and around the apex of a scoliotic curve, with these deformations reducing towards junctional vertebrae. We have also summarised a nomenclature defined by the Scoliosis Research Society, highlighting the need for more consistent reporting of these level-wise dimensional anatomical changes. CONCLUSION: Finally, we emphasised how a marked degree of heterogeneity exists between the included investigations, namely in scoliotic curve-type inclusion, imaging modality and timepoint of analysis within scoliosis' longitudinal development, and how improvement in these study design characteristics will enhance ongoing research.

Toward Patient Specific Models of Pediatric IVDs: A Parametric Study of IVD Mechanical Properties.

Patient specific finite element (FE) modeling of the pediatric spine is an important challenge which offers to revolutionize the treatment of pediatric spinal pathologies, for example adolescent idiopathic scoliosis (AIS). In particular, modeling of the intervertebral disc (IVD) is a unique challenge due to its structural and mechanical complexity. This is compounded by limited ability to non-invasively interrogate key mechanical parameters of a patient's IVD. In this work, we seek to better understand the link between mechanical properties and mechanical behavior of patient specific FE models of the pediatric lumbar spine. A parametric study of IVD parameter was conducted, coupled with insights from current knowledge of the pediatric IVD. In particular, the combined effects of parameters was investigated. Recommendations are made toward areas of importance in patient specific FE modeling of the pediatric IVD. In particular, collagen fiber bundles of the IVD are found to dominate IVD mechanical behavior and are thus recommended as an area of primary focus for patient specific FE models. In addition, areas requiring further experimental research are identified. This work provides a valuable building block toward the development of patient specific models of the pediatric spine.

Characterization of progressive changes in pedicle morphometry and neurovascular anatomy during growth in adolescent idiopathic scoliosis versus adolescents without scoliosis.

STUDY DESIGN: Prospective cohort study. OBJECTIVES: Investigate the progressive changes in pedicle morphometry and the spatial relationship between the pedicles and neurovascular structures in patients with AIS during growth. Adolescent idiopathic scoliosis (AIS) is a complex three-dimensional spine deformity. AIS pedicles are known to be asymmetrical when compared to adolescents without scoliosis. Defining the anatomical changes occurring progressively in scoliosis as it increases with time and growth is essential for understanding the pathophysiology of scoliosis and for treatment planning. MRI is the ideal method to study the growing spine without ionising radiation. METHODS: 24 females with AIS (mean 12.6 years, right sided main thoracic curves) and 20 non-scoliotic females (mean 11.5 years) were selected from an ongoing database. Participants underwent two 3D MRI scans (3 T scanner, T1, 0.5 mm isotropic voxels) approximately 1 year apart (AIS: mean 1.3 ± 0.05 years, control: mean 1.0 ± 0.1 years). The pedicle width, chord length, pedicle height, transverse pedicle angle, sagittal pedicle angle, distance from vertebrae to aorta and distance from pedicle to dural sac were measured from T5 to T12. Inter- and intra-observer variability was assessed. RESULTS: From scans 1-2 in the AIS group, the dural sac became closer to the left pedicle (p < 0.05, T6, T8-T10 and T12) while the distance from the vertebrae to the aorta increased (p < 0.05, T6-T10). No significant changes in these measurements were observed in the non-scoliotic group. Between scans, the AIS chord length and transverse pedicle angle increased on the left side around the apex (p < 0.05) creating asymmetries not seen in the non-scoliotic cohort. The mean pedicle height increased symmetrically in the non-scoliosis cohort (p < 0.05) and asymmetrically in the AIS group with the right side growing faster than the left at T6-T7 (p < 0.05). CONCLUSION: Asymmetrical growth patterns occur in the vertebral posterior elements of AIS patients compared to the symmetrical growth patterns found in the non-scoliotic participants. LEVEL OF EVIDENCE: Level II prospective comparative study.

Sequential MRI reveals vertebral body wedging significantly contributes to coronal plane deformity progression in adolescent idiopathic scoliosis during growth.

STUDY DESIGN: Cross-sectional study. OBJECTIVES: To provide a comprehensive, multi-stage investigation of vertebral body (VB) and intervertebral disc (IVD) coronal plane deformities for adolescent idiopathic scoliosis (AIS) patients with a main thoracic curve type, using a series of sequential magnetic resonance images (MRIs). Despite numerous investigations of AIS deformity at the spinal segmental level, there is little consensus as to the major contributor to the lateral curvature of a scoliotic spine. Moreover, scoliotic deformity is often described along a continuum of progression, with few studies having characterised the change in segmental deformity for AIS patients whose deformity progresses clinically over time. METHODS: 30 female AIS patients with primary thoracic curves were included between 2012 and 2016. Three sequential MRIs were captured for each patient. Datasets were reformatted to produce true coronal plane images of the thoracic spine (T4-L1). Overall curve morphology, coronal plane IVD and VB segmental deformity and rates of growth were analysed. RESULTS: Right-side asymmetry was greater in IVDs (18.5 ± 23.9%) when compared to VBs (8.3 ± 9.2%) (P < 0.05) by third scans. Despite this, 77% of patients demonstrated the majority (> 50%) of their coronal curvature was attributed to VB wedging when measured across all three scans. Regardless of progression status, scan number, or region, the sum of the VB wedging angle was greater than the sum of the IVD wedging angle (all P ≤ 0.05). There was no correlation between the rates of major curve angle progression and standing height increase, VB height growth, or IVD height growth (P > 0.05). CONCLUSIONS: VB wedging contributed more to the lateral deformity observed in primary thoracic subtypes of AIS patients than IVD wedging. While IVDs demonstrated the greatest asymmetric deformity, their relatively smaller height resulted in a smaller proportional change in lateral curve angle compared to the VBs. LEVEL OF EVIDENCE: IV.

Predicting spinal profile using 3D non-contact surface scanning: Changes in surface topography as a predictor of internal spinal alignment.

INTRODUCTION: 3D non-contact surface scanners capture highly accurate, calibrated images of surface topography for 3D structures. This study sought to establish the efficacy and accuracy of using 3D surface scanning to characterise spinal curvature and sagittal plane contour. METHODS: 10 healthy female adults with a mean age of 25 years, (standard deviation: 3.6 years) underwent both MRI and 3D surface scanning (3DSS) (Artec Eva, Artec Group Inc., Luxembourg) while lying in the lateral decubitus position on a rigid substrate. Prior to 3DSS, anatomical landmarks on the spinous processes of each participant were demarcated using stickers attached to the skin surface. Following 3DSS, oil capsules (fiducial markers) were overlaid on the stickers and the subject underwent MRI. MRI stacks were processed to measure the thoracolumbar spinous process locations, providing an anatomical reference. 3D coordinates for the markers (surface stickers and MRI oil capsules) and for the spinous processes mapped the spinal column profiles and were compared to assess the quality of fit between the 3DSS and MRI marker positions. RESULTS: The RMSE for the polynomials fit to the spinous process, fiducial and surface marker profiles ranged from 0.17-1.15mm for all subjects. The MRI fiducial marker location was well aligned with the spinous process profile in the thoracic and upper lumbar spine for nine of the subjects. Over the 10 subjects, the mean RMSE between the MRI and 3D scan sagittal profiles for all surface markers was 9.8mm (SD 4.2mm). Curvature was well matched for seven of the subjects, with two showing differing curvatures across the lumbar spine due to inconsistent subject positioning. CONCLUSION: Comparison of the observed trends for vertebral position measured from MRI and 3DSS, suggested the surface markers may provide a useful method for measuring internal changes in sagittal curvature or skeletal changes.

Determining a reliably visible and inexpensive surface fiducial marker for use in MRI: a research study in a busy Australian Radiology Department.

OBJECTIVES: Single-use commercial surface fiducial markers are used in clinical imaging for a variety of applications. The current study sought to find a new, reliably visible, easily sourced and inexpensive fiducial marker alternative for use with MRI. DESIGN: Five commonly requested MRI sequences were determined (three-dimensional (3D) T1-weighted, T1 coronal, 3D T2-weighted, T2 fat suppressed, proton density), to examine the visibility of 18 items (including a commercial fiducial marker). SETTING: Clinical 3T MRI scanner in an Australian Tertiary Hospital and an Australian University Biomedical Engineering research group. INTERVENTIONS: 18 marker alternatives were scanned using five common MRI sequences. Images were reformatted to obtain both an image through the mid-height of each marker and a maximum intensity z-projection image over the volume of the marker. Variations in marker intensity were profiled across each visible marker and a visibility rating defined. MAIN OUTCOME MEASURES: Outcome measures were based on quantitative assessment of a clear intensity contrast ratio between the marker and the adjacent tissue and a qualitative assessment of visibility via a 3-point scale. RESULTS: The fish oil capsule, vitamin D capsule, paint ball pellet, soy sauce sushi tube and commercial markers were typically visible to a high quality on all the imaging sequences and demonstrated a clear differential in intensity contrast against the adjacent tissue. Other common items, such as plasticine 'play doh' and a soft 'Jelly baby' sweet, were surprise candidates, demonstrating high-quality visibility and intensity contrast for the 3D T1-weighted sequence. CONCLUSIONS: Depending on the basis for referral and MRI sequence chosen, four alternative fiducial markers were determined to be inexpensive, easily sourced and consistently visible. Of these, the vitamin D capsule provided an excellent balance between availability, size, cost, usability and quality of the visualised marker for all the commonly used MRI sequences analysed.

Material properties of human lumbar intervertebral discs across strain rates.

BACKGROUND CONTEXT: The use of finite element (FE) methods to study the biomechanics of the intervertebral disc (IVD) has increased over recent decades due to their ability to quantify internal stresses and strains throughout the tissue. Their accuracy is dependent upon realistic, strain-rate dependent material properties, which are challenging to acquire. PURPOSE: The aim of this study was to use the inverse FE technique to characterize the material properties of human lumbar IVDs across strain rates. STUDY DESIGN: A human cadaveric experimental study coupled with an inverse finite element study. METHODS: To predict the structural response of the IVD accurately, the material response of the constituent structures was required. Therefore, compressive experiments were conducted on 16 lumbar IVDs (39±19 years) to obtain the structural response. An FE model of each of these experiments was developed and then run through an inverse FE algorithm to obtain subject-specific constituent material properties, such that the structural response was accurate. RESULTS: Experimentally, a log-linear relationship between IVD stiffness and strain rate was observed. The material properties obtained through the subject-specific inverse FE optimization of the annulus fibrosus (AF) fiber and AF fiber ground matrix allowed a good match between the experimental and FE response. This resulted in a Young modulus of AF fibers (-MPa) to strain rate (ε˙, /s) relationship of YMAF=31.5ln(ε˙)+435.5, and the C10 parameter of the Neo-Hookean material model of the AF ground matrix was found to be strain-rate independent with an average value of 0.68 MPa. CONCLUSIONS: These material properties can be used to improve the accuracy, and therefore predictive ability of FE models of the spine that are used in a wide range of research areas and clinical applications. CLINICAL SIGNIFICANCE: Finite element models can be used for many applications including investigating low back pain, spinal deformities, injury biomechanics, implant design, design of protective systems, and degenerative disc disease. The accurate material properties obtained in this study will improve the predictive ability, and therefore clinical significance of these models.

Accuracy of 3D surface scanners for clinical torso and spinal deformity assessment.

Externally visible deformities are cosmetic features of great concern for Adolescent Idiopathic Scoliosis (AIS) patients. Current assessment techniques for AIS do not fully encompass the external deformity. A non-invasive method capable of capturing superficial anatomy, such as 3D scanning, would enable better qualitative and quantitative evaluation of cosmesis. This study aimed to quantify the accuracy of commonly available scanners, in assessing posterior asymmetry in AIS. The technique of 3D surface deviation analysis was proposed as a suitable method for comparing the models created by each scanner. Eight plaster cast moulds manufactured to create braces for AIS patients were used as test samples. Four 3D scanners were selected: Solutionix RexScan CS+; Artec Eva; Microsoft Kinect V1; iPhone with 123D Catch App. These scanners were selected from those available as representative of a range of scanning technologies. Each cast was scanned and 3D models created. A simulated rib hump measurement was obtained and the surface-to-surface deviations between the Solutionix scan and all other scans were determined. The Solutionix scanner is a metrology scanner of very high quality and so it was selected as the reference. Surface-to-surface deviations were calculated in the positive and negative directions separately to specifically identify size and volume inaccuracies created by the scans. Surface deviations showed excellent agreement between the Solutionix and the Eva with deviations of +0.17 ±â€¯0.17 mm (Eva regions larger) and -0.20 ±â€¯0.32 mm (Eva regions smaller) (mean±SD). The Kinect showed lower agreement (+1.58 ±â€¯1.50 mm and -0.58 ±â€¯0.58 mm). The iPhone scans were not able to be scaled to the correct size, so were excluded. Rib hump measurements with all scanners were within clinical measurement variability (±4.9 deg) of the known values. These commercially available 3D scanners are capable of imaging torso shape in 3D and deriving clinically relevant external deformity measures. The non-invasive 3D topographic information provided can be used to improve assessment of torso shape in spinal deformity patients.

Change in Lung Volume Following Thoracoscopic Anterior Spinal Fusion Surgery: A 3-Dimensional Computed Tomography Investigation.

STUDY DESIGN: Lung volumes and thoracic anatomy were measured from low-dose computed tomography (CT) scans preoperatively and 2 years following thoracoscopic anterior spinal fusion (TASF) for adolescent idiopathic scoliosis (AIS). OBJECTIVE: The aim of this study was to assess changes in lung volume after TASF surgical correction. SUMMARY OF BACKGROUND DATA: AIS patients are known to have decreased pulmonary function as a consequence of their spinal and ribcage deformity. Several studies have evaluated changes in pulmonary function clinically after scoliosis correction surgery showing varied results. To date, there have been no published studies using CT to evaluate lung volume changes following TASF. METHODS: Twenty-three female AIS patients with both pre- and 2 years postoperative low-dose CT scans were selected from an ethically approved, historical databank. Three-dimensional lung volumes were reconstructed to determine anatomical lung volumes. Right and left lung volumes, total lung volume, and right-to-left lung volume ratio were obtained as well as hemithoracic symmetry, to indicate the extent of thorax deformity. Cobb angle, rib hump, levels fused in surgery, and patient height were used for correlation analysis with the lung volume results. RESULTS: Left lung volume, total lung volume, and hemithoracic ratio all increased significantly 2 years after surgery. There was no significant change in right-to-left lung volume ratio (P = 0.36). Statistical regression found significant positive correlation between lung volume changes, reduction in Cobb angle, increase in height, and improvement in hemithoracic symmetry ratio. CONCLUSION: TASF resulted in a statistically significant increase in lung volume following surgery, as well as improvement in the symmetry of the thoracic architecture; however, the postoperative lung volumes remained in the lower 50th percentile relative to females without thoracic deformity. Furthermore, change in lung volume was significantly correlated with changes in Cobb angle, hemithoracic asymmetry, and increased patient height, which are important consequences of thoracic deformity correction surgery. LEVEL OF EVIDENCE: 3.

Load-induced changes in the diffusion tensor of ovine anulus fibrosus: A pilot MRI study.

PURPOSE: To assess the feasibility of diffusion tensor imaging (DTI) for evaluating changes in anulus fibrosus (AF) microstructure following uniaxial compression. MATERIALS AND METHODS: Six axially aligned samples of AF were obtained from a merino sheep disc; two each from the anterior, lateral, and posterior regions. The samples were mechanically loaded in axial compression during five cycles at a rate and maximum compressive strain that reflected physiological conditions. DTI was conducted at 7T for each sample before and after mechanical testing. RESULTS: The mechanical response of all samples in unconfined compression was nonlinear. A stiffer response during the first loading cycle, compared to the remaining cycles, was observed. Change in diffusion parameters appeared to be region-dependent. The mean fractional anisotropy increased following mechanical testing. This was smallest in the lateral (2% and 9%) and largest in the anterior and posterior samples (17-25%). The mean average diffusivity remained relatively constant (<2%) after mechanical testing in the lateral and posterior samples, but increased (by 5%) in the anterior samples. The mean angle made by the principal eigenvector with the spine axis in the lateral samples was 73° and remained relatively constant (<2%) following mechanical testing. This angle was smaller in the anterior (55°) and posterior (47°) regions and increased by 6-16° following mechanical testing. CONCLUSION: These preliminary results suggest that axial compression reorients the collagen fibers, such that they become more consistently aligned parallel to the plane of the endplates. LEVEL OF EVIDENCE: 1 Technical Efficacy: Stage 1 J. MAGN. RESON. IMAGING 2017;45:1723-1735.

Evaluating the Change in Axial Vertebral Rotation Following Thoracoscopic Anterior Scoliosis Surgery Using Low-Dose Computed Tomography.

BACKGROUND CONTEXT: In recent years, there has been increasing appreciation of the need to treat scoliosis as a three-dimensional deformity. PURPOSE: Assessment of surgical strategies and outcomes should consider not only the coronal plane correction but also derotation of the transverse plane deformity that can affect trunk appearance. STUDY DESIGN: This study included a cohort of 29 female adolescent idiopathic scoliosis patients who received thoracoscopic single rod anterior fusion (TASF) surgery. This study used pre- and postoperative low-dose computed tomographic (CT) scans to accurately measure apical axial vertebral rotation (AVR). METHODS: The pre- and postoperative values for clinically measured coronal Cobb correction and rib hump correction as well as AVR were compared to determine whether these values improved postoperatively. There are no conflicts of interest to report for authors of this investigation. RESULTS: As expected, statistically significant reductions in coronal Cobb angle (mean preoperative Cobb 51°, reducing to 24° at the two-year follow-up) and rib hump (mean preoperative rib hump 15°, reducing to 7° at two-year follow-up) were achieved. The mean reduction in apical AVR measured using CT was only 3° (mean preoperative AVR 16°, reducing to 13° at two-year follow-up), which was statistically but not clinically significant. Significant correlations were found between Cobb angle and rib hump, between Cobb angle and AVR, and between AVR and rib hump, suggesting that patients with greater coronal Cobb correction also achieve better derotation with this surgical procedure. CONCLUSIONS: The historical low-dose CT data set permitted detailed three-dimensional assessment of the deformity correction that is achieved using thoracoscopic anterior spinal fusion for progressive adolescent idiopathic scoliosis.