ABSTRACT
Neutron bubble detector is so far the only personal neutron dosimeter satisfying the energy response criteria of the International Committee of Radiation Protection 60 (ICRP 60). This paper presents our studies on neutron bubble detectors including the manufacture, the relevant equipments, the basic calibrations and on-site tests for monitoring personal neutron dose. The results of calibrations show that the highest sensitivity so far manufactured by the authors reaches about 4bubbles/µSv, the correlation coefficient of dose response is 0.99, and the in-batch consistency and reproducibility are up to the ISO standards. The results of on-site test show that the in-batch consistency and between-batch consistency are within 15% relative standard uncertainty. The results are directly readable. The detectors are portable, especially suitable for on-site neutron dose monitoring in n-γ mixed radiation fields.
Subject(s)
Radiation Monitoring/instrumentation , Radiometry/methods , Calibration , Dose-Response Relationship, Radiation , Equipment Design , Humans , Neutrons , Radiation Dosage , Radiation Monitoring/standards , Radiation Protection/methods , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
Nuclear tracks can be etched into pores in which the refractive indexes gradually increase, so that the sample surface reflects very few lights back. CR-39 samples were bombarded with sulfur ions from the Tandem Accelerator HI-13 of CIAE. Three kinds of procedures were performed in the following treatments. The reflectivity was measured for all samples, untreated and treated, within the wavelengths of visible light. The results indicated that the reflectivity of the CR-39 samples modified with the track technique and multilayer coating can be as low as 0.1%.
