L-Arginine-Functionalized Carbon Dots with Enhanced Red Emission and Upregulated Intracellular L-Arginine Intake for Obesity Inhibition.

Obesity is a major global health problem that significantly increases the risk of many other diseases. Herein, a facile method of suppressing lipogenesis and obesity using L-arginine-functionalized carbon dots (L-Arg@CDots) is reported. The prepared CDots with a negative surface charge form stronger bonds than D-arginine and lysine with L-Arg in water. The L-Arg@CDots in the aqueous solution offer a high photoluminescence quantum yield of 23.6% in the red wavelength region. The proposed L-Arg functionalization strategy not only protects the red emission of the CDots from quenching by water molecules but also enhances the intracellular uptake of L-Arg to reduce lipogenesis. Injection of L-Arg@CDots can reduce the body weight increase in ob/ob mice by suppressing their food intake and shrinking the white adipose tissue cells, thereby significantly inhibiting obesity.

Toward Strong Near-Infrared Absorption/Emission from Carbon Dots in Aqueous Media through Solvothermal Fusion of Large Conjugated Perylene Derivatives with Post-Surface Engineering.

Carbon dots (CDs) have attracted significant interest as one of the most emerging photoluminescence (PL) nanomaterials. However, the realization of CDs with dominant near-infrared (NIR) absorption/emission peaks in aqueous solution remains a great challenge. Herein, CDs with both main NIR absorption bands at 720 nm and NIR emission bands at 745 nm in an aqueous solution are fabricated for the first time by fusing large conjugated perylene derivatives under solvothermal treatment. With post-surface engineering, the polyethyleneimine modified CDs (PEI-CDs) exhibit enhanced PL quantum yields (PLQY) up to 8.3% and 18.8% in bovine serum albumin aqueous and DMF solutions, which is the highest PLQY of CDs in NIR region under NIR excitation. Density functional theory calculations support the strategy of fusing large conjugated perylene derivatives to achieve NIR emissions from CDs. Compared to the commercial NIR dye Indocyanine green, PEI-CDs exhibit excellent photostability and much lower cost. Furthermore, the obtained PEI-CDs illustrate the advantages of remarkable two-photon NIR angiography and in vivo NIR fluorescence bioimaging. This work demonstrates a promising strategy of fusing large conjugated molecules for preparing CDs with strong NIR absorption/emission to promote their bioimaging applications.

Aluminum-Based Surface Polymerization on Carbon Dots with Aggregation-Enhanced Luminescence.

Aggregation-induced luminescence quenching of carbon nanodots (CDs) is the main obstacle for their applications in solid-state light emitting devices. Herein, we developed a one-step synthesis of solid-state emissive CDs with surface aluminum-based polymerization by adding AlCl3 in citric acid and urea via a microwave-heating dehydration process. Due to the strong coordination ability of Al ions with N and O atoms, considerable steric hindrance of Al-based cross-linked polymerization was introduced on the surface of the CDs, which not only avoided aggregation of the green emissive carbon cores but also facilitated efficient energy transfer from the blue emissive polymerized surface to the green emissive carbon cores in aggregates, leading to enhanced green emissions with a photoluminescence quantum yield (PLQY) of 72.7% in the solid state.

Morphology Control of Luminescent Carbon Nanomaterials: From Dots to Rolls and Belts.

In this work, we report a successful extension of the family of light-emitting colloidal carbon nanostructures to a number of different shapes and morphologies, namely, carbon nanorolls (CNRs) and carbon nanobelts (CNBs). Near infrared (NIR)-emissive CNRs were synthesized via a solvothermal fusion of carbon dots (CDs) triggered by a dehydration process of their surface functional groups. They appear in a form of short cylinders, with diameters ranging from 20 to 40 nm and cylinder lengths ranging from 7 to 20 nm. In ethanol solution, CNRs have a maximum absorption peak at 665 nm and a NIR emission band extending from 650 to 800 nm, with a photoluminescence quantum yield of 9.2%. Intriguingly, the rolled structure of CNRs can be uncoiled under 655 nm laser irradiation (power density 1 W·cm-2) of their solution in ethanol, forming CNBs with a width of 7-20 nm and lengths reaching several hundreds of nanometers, which is accompanied by a considerably decreased absorption band at 665 nm and a decreased NIR emission. This unfolding is ascribed to the decrease of the strength of interlayer hydrogen bonding, owing to the photothermally induced dehydration and further carbonization of the CNRs. Alongside the decreased NIR emission, CNBs exhibit enhanced green and red emissions under UV and green light excitation, respectively, which allows us to demonstrate multiple-level luminescence encryptions on a paper stamped with CNR- and CNB-inks.

Enhanced Near-Infrared Emission from Carbon Dots by Surface Deprotonation.

Carbon dots (CDs) with efficient excitation and emission in deep-red/near-infrared (NIR) spectral range are important for bioimaging applications. Herein, we develop a simple and effective method to significantly enhance both the absorption and emission of CDs in deep-red/NIR by suppressing nonradiative charge recombination via deprotonation of the CD surface. As compared to aqueous solutions at room temperature, NIR emission of CDs in N,N-dimethylformamide and glycerol experience a 50- and 70-fold increase at -20 °C, respectively, due to enhanced deprotonation ability and viscosity. On the basis of the adjustable NIR fluorescence intensity of CDs, multilevel data encryption in the NIR region is realized by controlling the humidity and the temperature of a CD-ink stamped paper.

A co-crystallization induced surface modification strategy with cyanuric acid modulates the bandgap emission of carbon dots.

Along the line of offering surface modification strategies to tune emission properties of carbon dots (CDs), a co-crystallization strategy with cyanuric acid (CA) was developed to modulate the bandgap emissions of CDs and produce highly emissive solid composite CD-based materials. The original blue emission of the CDs changed to a green emission of the CDs@CA crystals, which showed a high photoluminescence quantum yield of 62% and room temperature phosphorescence. The CA molecules firmly bonded to the surface of the CDs and cannot be disrupted by polar solvents or temperature stimuli under ambient conditions, which influenced electron transitions of CDs leading to improved luminescence with excellent thermal stability both in solution and solid states.

Thermally Activated Upconversion Near-Infrared Photoluminescence from Carbon Dots Synthesized via Microwave Assisted Exfoliation.

Upconversion near-infrared (NIR) fluorescent carbon dots (CDs) are important for imaging applications. Herein, thermally activated upconversion photoluminescence (UCPL) in the NIR region, with an emission peak at 784 nm, which appears under 808 nm continuous-wave laser excitation, are realized in the NIR absorbing/emissive CDs (NIR-CDs). The NIR-CDs are synthesized by microwave-assisted exfoliation of red emissive CDs in dimethylformamide, and feature single or few-layered graphene-like cores. This structure provides an enhanced contact area of the graphene-like plates in the core with the electron-acceptor carbonyl groups in dimethylformamide, which contributes to the main NIR absorption band peaked at 724 nm and a tail band in 800-850 nm. Temperature-dependent photoluminescence spectra and transient absorption spectra confirm that the UCPL of NIR-CDs is due to the thermally activated electron transitions in the excited state, rather than the multiphoton absorption process. Temperature dependent upconversion NIR luminescence imaging is demonstrated for NIR-CDs embedded in a polyvinyl pyrrolidone film, and the NIR upconversion luminescence imaging in vivo using NIR-CDs in a mouse model is accomplished.

On-Off switching of the phosphorescence signal in a carbon dot/polyvinyl alcohol composite for multiple data encryption.

Phosphorescence processes in composite systems based on luminescent carbon dots (CDs) are of great fundamental and practical interest. Herein, the control of the phosphorescent signal in a CD/polyvinyl alcohol (PVA) composite is realized. Enhanced green phosphorescence is obtained via thermal annealing of the composite under 200 °C, which can be quenched via water treatment, and then recovered again, via either repeated annealing or near-infrared laser irradiation. Water molecules infiltrating the CD/PVA composite lead to considerable vibrational motions of the CD surface groups through destruction of the rigid composite structure together with an increase in the possibility of the penetration of the phosphorescence quenchers, and thus a decrease in the phosphorescence intensity. After repeated annealing, the nonradiative transitions are restricted, and the phosphorescence signal is recovered again. Based on such on-off switching of the phosphorescence signal, a concept of multiple data encryption is realized by using the CD@PVA composite.

Oleylamine-assisted and temperature-controlled synthesis of ZnO nanoparticles and their application in encryption.

A temperature-controlled synthesis process for ZnO nanoparticles (NPs) with the assist of oleylamine (OAm) has been demonstrated, and the ZnO NPs show bright fluorescence under ultraviolet illumination. In this process, zinc nitrate was firstly converted to zinc nitrate hydroxide (Zn5(OH)8(NO3)2) sheets with the assist of OAm, then the Zn5(OH)8(NO3)2 was decomposed into fluorescent ZnO NPs by increasing the ambient temperature. Furthermore, information encryption has been realized based on this process. For encryption, the encrypted information cannot be observed, while the encrypted information appears when they are proceeded in the temperature of 120 °C for about one minute. The results shown in this work provide a controllable way for the synthesis of ZnO NPs by adjusting the reaction temperature, and this may inspire wide applications of ZnO in information encryption.

The biology and ecology of the emerald ash borer, Agrilus planipennis, in China.

The biology, ecology, and life cycle of the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), were studied using regular inspection in the forest and observations in the laboratory. Results indicated that A. planipennis are mostly univoltine in Tianjin, China. They overwintered individually as mature larvae in shallow chambers excavated in the outer sapwood. In late July, some full-grown larvae began to build overwintering chambers, and all larvae entered the sapwood for dormancy by early November. A. planipennis pupated in the overwintering chamber from early April to mid May the following year, and the average pupal duration was about 20 days. In late April, some newly eclosed adults could be found in the pupal cells, but they had not yet emerged from the tree. Adults began to emerge in early May, with peak flight occurring in mid May. The average longevity of adults was about 21 days and the adult stage lasted through early July. The adults fed on ash foliage as a source of nutrition. Mating was usually conducted and completed on the leaf or trunk surfaces of ash trees. Oviposition began in mid May and eggs hatched on average in 15.7 days. The first instar larvae appeared in early June. The larval stage lasted about 300 days to complete an entire generation. The emerald ash borer had four larval instars on velvet ash, Fraxinus velutina (Scrophulariales: Oleaceae). The major natural control factors of A. planipennis were also investigated, and preliminary suggestions for its integrated management are proposed.

Biology and behavior of Spathius agrili, a parasitoid of the emerald ash borer, Agrilus planipennis, in China.

Spathius agrili Yang (Hymenoptera: Braconidae) is a gregarious larval ectoparasitoid of the emerald ash borer, Agrilus planipennis Fairmaire (Coleoptera: Buprestidae) and is a recently described species. Both pest and parasitoid are native to China. In Tianjin City, China, S. agrili typically exhibited 3-4 generations per year, overwintering as a prepupa in a cocoon inside the host gallery. The multiple generations of S. agrili overlapped with its host, as did the emergence dates of the overwintering generation. From a single host, 1-18 S. agrili successfully developed to the adult stage (average 8.4), but in all cases the host was killed. The sex ratio (female: male) of the parasitoid adults emerging from field-collected cocoons was 2:1, whereas the sex ratio of parasitoids reared from field collected eggs and larvae was greater than 3:1. On average, adult females lived 29.1 d, and males lived 23.6 d when fed with 20% honey solution, significantly longer than without a nutritional supplement. Sexual reproduction is the normal mode of reproduction, but in the laboratory females did reproduce parthenogenetically, producing only males. The average fecundity was 23.3 eggs per female in the laboratory. S. agrili developed through five larval instars, and the larvae fed gregariously on the host hemolymph. The generation time from egg to adult wasp was 27-28 d at 22-26 degrees C. Natural parasitism rates were as high as 60%, and in October they reached over 90% in some stands. This study showed that S. agrili is a promising agent for biocontrol of A. planipennis.