Photothermal Atomic Force Microscopy Coupled with Infrared Spectroscopy (AFM-IR) Analysis of High Extinction Coefficient Materials: A Case Study with Silica and Silicate Glasses.

Photothermal atomic force microscopy coupled with infrared spectroscopy (AFM-IR) brings significant value as a spatially resolved surface analysis technique for disordered oxide materials such as glasses, but additional development and fundamental understanding of governing principles is needed to interpret AFM-IR spectra, since the existing theory described for organic materials does not work for materials with high extinction coefficients for infrared (IR) absorption. This paper describes theoretical calculation of a transient temperature profile inside the IR-absorbing material considering IR refraction at the interface as well as IR adsorption and heat transfer inside the sample. This calculation explains the differences in peak positions and amplitudes of AFM-IR spectra from those of specular reflectance and extinction coefficient spectra. It also addresses the information depth of the AFM-IR characterization of bulk materials. AFM-IR applied to silica and silicate glass surfaces has demonstrated novel capability of characterizing subsurface structural changes and surface heterogeneity due to mechanical stresses from physical contacts, as well as chemical alterations manifested in surface layers through aqueous corrosion.

Vanadium Oxidation States and Structural Role in Aluminoborosilicate Glasses: An Integrated Experimental and Molecular Dynamics Simulation Study.

Vanadium-containing glasses have aroused interest in several fields such as electrodes for energy storage, semiconducting glasses, and nuclear waste disposal. The addition of V2O5, even in small amounts, can greatly alter the physical properties and chemical durability of glasses; however, the structural role of vanadium in these multicomponent glasses and the structural origins of these property changes are still poorly understood. We present a comprehensive study that integrates advanced characterizations and atomistic simulations to understand the composition-structure-property relationships of a series of vanadium-containing aluminoborosilicate glasses. UV-vis spectroscopy, X-ray photoelectron spectroscopy, and X-ray absorption near-edge structure (XANES) have been used to investigate the complex distribution of vanadium oxidation states as a function of composition in a series of six-component aluminoborosilicate glasses. High-energy X-ray diffraction and molecular dynamics simulations were performed to extract the detailed short- and medium-range atomistic structural information such as bond distance, coordination number, bond angle, and network connectivity, based on recently developed vanadium potential parameters. It was found that vanadium mainly exists in two oxidation states: V5+ and V4+, with the former being dominant (∼80% from XANES) in most compositions. V5+ ions were found to exist in 4-, 5-, and 6-fold coordination, while V4+ ions were mainly in 4-fold coordination. The percentage of 4-fold-coordinated boron and network connectivity initially increased with increasing V2O5 up to around 5 mol % but then decreased with higher V2O5 contents. The structural role of vanadium and the effect on glass structure and properties are discussed, providing insights into future studies of sophisticated structural descriptors to predict glass properties from composition and/or structure and aiding the formulation of borosilicate glasses for nuclear waste disposal and other applications.

Validity and reliability of the Brain Health Self-Efficacy Scale for the elderly.

BACKGROUND: With the rapid increase in ageing population, China is confronted with the daunting challenge of a growing number of patients with neurocognitive disorders (NCDs). This trend makes the maintenance of self-health and early intervention essential, highlighting the need for a tool that assesses self-efficacy of older adults in maintaining brain health or cognitive function. AIM: This study aimed to design the Brain Health Self-Efficacy Scale (BHSES) to measure elderly individuals' attitudes to NCDs, motivations and future plans for controlling risks. The psychometric properties of BHSES have been validated. METHODS: Based on the current literature and relevant models, a 19-item scale was created during the first stage. A total of 660 older adults in the Yinhang community of Shanghai were included. The statistical approaches of item analysis, exploratory factor analysis (EFA), confirmatory factor analysis (CFA), criterion-related validity and reliability test were used to evaluate the quality of BHSES. In addition, the Geriatric Depression Scale (GDS) and the Self-Rating Anxiety Scale (SAS) were used as criteria to test the criterion-related validity. RESULTS: To test item differentiation, the study adopted item analysis and excluded item 8. Selecting a random half of the sample for EFA, the BHSES was refined to 16 items, which were categorised into the following three dimensions: 'memory belief efficacy', 'self-care efficacy' and 'future planning efficacy'. These were highly consistent with the hypothesis model. Its cumulative variance contribution rate reached 61.14%, with factor loads of all items above 0.5. The three-factor model was confirmed by the remaining data through CFA. All fit indices reached the acceptable level (χ2=3.045, Goodness of Fit Index=0.898, adjusted Goodness of Fit Index=0.863, Comparative Fit Index=0.916, Incremental Fit Index=0.917, Tucker-Lewis Index=0.900, root mean square error of approximation=0.079 and root mean residual=0.068). The GDS and SAS scores revealed significant correlations with the BHSES score, indicating a high criterion-related validity. The overall Cronbach's α coefficient was 0.793, with the α coefficients' distribution of subdimensions ranging from 0.748 to 0.883. CONCLUSIONS: The 16-item, self-compiled BHSES is a reliable and valid measurement. It could help identify older adults with potential risks for developing NCDs or with high suspicion of cognitive impairment onset in recent periods and also offer insight into tracking brain health self-efficacy in association with cognition status.

Nanoasperity Adhesion of the Silicon Surface in Humid Air: The Roles of Surface Chemistry and Oxidized Layer Structures.

The interfacial adhesion between silicon oxide surfaces is normally believed to be governed by the surface chemistry of the topmost surface affecting the water contact angle and hydrogen bonding interactions. In the case of a silicon wafer, the physical structure of the native oxide at the surface can vary drastically depending on the aging process; thus, not only the surface chemistry but also the history of surface treatment can also have a profound impact on nanoasperity adhesion. This study reports the effect of aging conditions (ambient air, liquid water, and liquid ethanol) on the nanoasperity adhesion behaviors of a silicon surface. When the silicon surface is kept in liquid alcohol, the surface remains hydrophobic, and adhesion in ambient air can be explained with the capillary effect of the liquid meniscus condensed around the annulus of the nanoasperity contact. When the silicon surface is oxidized in ambient air, the surface gradually becomes hydrophilic, and the strongly hydrogen-bonded water network of adsorbed water plays a dominant role in the nanoasperity interfacial adhesion force. When the silicon surface is aged in liquid water, the interfacial adhesion force measured in ambient air is significantly larger than the value predicted from the theoretical model based on the water contact angle and the hydrogen bonding interaction at the topmost surface. This is because the surface layer oxidized in liquid water is gel-like and thus can swell upon uptake of water from the humid air. To fully encompass all these behaviors, a solid-adsorbate-solid model predicting the adhesion force is developed by introducing a fitting parameter ß, which can be adjusted depending on the adsorbed water structure and the swelling capacity of the oxidized surface layer.

Self-accelerated corrosion of nuclear waste forms at material interfaces.

The US plan for high-level nuclear waste includes the immobilization of long-lived radionuclides in glass or ceramic waste forms in stainless-steel canisters for disposal in deep geological repositories. Here we report that, under simulated repository conditions, corrosion could be significantly accelerated at the interfaces of different barrier materials, which has not been considered in the current safety and performance assessment models. Severe localized corrosion was found at the interfaces between stainless steel and a model nuclear waste glass and between stainless steel and a ceramic waste form. The accelerated corrosion can be attributed to changes of solution chemistry and local acidity/alkalinity within a confined space, which significantly alter the corrosion of both the waste-form materials and the metallic canisters. The corrosion that is accelerated by the interface interaction between dissimilar materials could profoundly impact the service life of the nuclear waste packages, which, therefore, should be carefully considered when evaluating the performance of waste forms and their packages. Moreover, compatible barriers should be selected to further optimize the performance of the geological repository system.

The chromatin remodeling protein INO80 contributes to the removal of H2A.Z at the p53-binding site of the p21 gene in response to doxorubicin.

Transcriptional activation of p21 (cyclin-dependent kinase inhibitor 1A) due to DNA damage often alters the distribution of histone variant H2A.Z at the p21 gene. However, whether the human INO80 complex regulates changes in H2A.Z at the p21 promoter is unclear. We show here that activation of p21 expression by doxorubicin (Doxo) in U2OS cells is required for removal of H2A.Z by INO80 at the p53-binding site proximal region (-2.2 kb) of the p21 promoter. A purified INO80 complex, but not the INO80E653Q mutant-complex, which lost DNA-sliding activity, is mainly responsible for removing H2A.Z from reconstituted nucleosomes in vitro. This activity was enhanced with MOF-mediated histone acetylation, suggesting that INO80 more readily removes H2A.Z from loosened nucleosomes. Also, co-occupancy of INO80 and H2A.Z -2.2 kb upstream of the p21 transcriptional start site (TSS) was observed. H2A.Z at this region was removed in a short time after Doxo treatment and activated p21 expression. However, p21 induction was inhibited by INO80 knockdown by delaying H2A.Z removal, indicating the need for INO80. Moreover, shMOF-mediated histone acetylation reduced recruitment of INO80 -2.2 kb upstream of p21 TSS and inhibited the removal of H2A.Z in Doxo-treated cells. These data provide new insights into the transcriptional regulation of p21 by the INO80 complex.

Controlling the Placement of Spherical Nanoparticles in Electrically Driven Polymer Jets and its Application to Li-Ion Battery Anodes.

Employing circumferentially uniform air flow through the sheath layer of the concentric coaxial nozzle, the gas-assisted electrospinning (GAES) utilizes both high electric field and controlled air flow to produce nanofibers. The ability to tailor the distribution of various nanofillers (1.85-12.92 vol% of spherical SiO2 and Si nanoparticles) in a polyvinyl alcohol jet is demonstrated by varying airflow rates in GAES. The distribution of nanofillers is measured from transmission electron microscopy and is analyzed using an image processing technique to perform the dispersion area analysis and obtain the most probable separation between nanoparticles using fast Fourier transform (FFT). The analysis in this study indicates an additional 350% improvement in dispersion area with the application of high but controlled airflow, and a 75 percent decrease in separation between nanoparticles from the FFT. The experiments in this study are in good agreement with a coarse-grained MD simulation prediction for a polymer nanocomposite system subjected to extensional deformation. Lastly, utilizing the sheath layer air flow in production of Li-battery anode material, a 680 mAh g-1 improvement is observed in capacity for nanofibers spun via GAES compared to ES at the same Si NP loading, which is associated with better dispersion of the electrochemically active nanoparticles.

Thermal and rheological properties of breadfruit starch.

The thermal and rheological properties of breadfruit starch were studied using DSC and 2 different rheometers. It was found that the gelatinization temperature of starch with excess moisture content (>70%) was at approximately 75 °C. A new endotherm was detected at about 173 °C when the moisture content was lower than required for full gelatinization of the starch. A detailed examination revealed that this endotherm represented the melting of amylose-lipid complexes. Breadfruit starch paste exhibited shear-thinning fluid characteristics, and good thermal and pH stability. The setback viscosity of the breadfruit starch was lower than that of potato and corn starches. The rheological properties of the breadfruit starch paste was well described by the Herschel-Bulkley model at a shear rate of 0 to 100 s(-1), where R(2) is greater than 0.95, and it behaved like a yield-pseudoplastic fluid. Both the storage modulus and loss modulus of the paste initially increased sharply, then dropped after reaching the gelatinization peak. Breadfruit starch gel showed both flexibility and viscosity. Suspension with 6% starch content exhibited very weak gel rigidity; however, this increased significantly at starch contents above 20%.

Cloning and characterization of the gene encoding the z66 antigen of Salmonella enterica serovar Typhi.

Z66 antigen-positive strains of Salmonella enterica serovar Typhi change flagellin expression in only one direction from the z66 antigen to the d or j antigen, which is different from the phase variation of S. enterica serovar Typhimurium. In the present study, we identified a new flagellin gene in z66 antigen-positive strains of S. enterica serovar Typhi. The genomic structure of the region containing this new flagellin gene was similar to that of fljBA operon of biphasic S. enterica serovars. A fljA-like gene was present downstream of the new flagellin gene. A rho-independent terminator was located between the new flagellin gene and the fljA-like gene. Hin-like gene was not present upstream of the new flagellin gene. We generated a mutant strain of S. enterica serovar Typhi, which carries a deletion of the new flagellin gene. Western blotting revealed that the 51-kDa z66 antigen protein was absent from the population of proteins secreted by the mutant strain. Southern hybridization demonstrated that the z66 antigen-positive strains of S. enterica serovar Typhi carried the new flagellin gene and fliC on two different genomic EcoRI fragments. When z66 antigen-positive strains were incubated with anti-z66 antiserum, the flagellin expression by S. enterica serovar Typhi changed from z66 antigen to j antigen. The new flagellin gene and the fljA-like gene were absent in the strain with altered flagellin expression. These results suggested that the new flagellin gene is a fljB-like gene, which encodes the z66 antigen of S. enterica serovar Typhi, and that deletion of fljBA-like operon may explain why S. enterica serovar Typhi alters the flagellin expression in only one direction from the z66 antigen to the d or j antigen.