Factorial experimental designs for enhancement of concurrent poly(hydroxyalkanoate) production and brewery wastewater treatment.

The influence of four main process parameters--solids retention time (SRT), hydraulic retention time (HRT), anoxic-oxic cycling, and carbon-to-nitrogen ratio (C/N ratio)--on poly(hydroxyalkanoate) (PHA) production, while treating brewery wastewater, was studied. Two sets of two-level, three-factor experimental designs were implemented to (1) determine the effects and interactions among process parameters, (2) assess their significance to PHA production, and (3) approximate optimal operational conditions. The HRT and SRT were found to be the crucial operational parameters affecting PHA production. The highest PHA content of 55% (on a cell-weight basis) was produced at a 4-day HRT and 4-day SRT, whereas a maximum PHA concentration of 907 mg/L was obtained at a 2-day HRT and 12-day SRT. The effect of anoxic conditions on PHA production was insignificant. The C/N ratio played a more important role in the PHA concentration in the system than in the PHA content in the biomass.

Production of polyhydroxyalkanoate during treatment of tomato cannery wastewater.

Polyhydroxyalkanoate (PHA) production was achieved using tomato cannery waste coupled with a mixed microbial culture during wastewater treatment. The two-stage PHA production process comprised a sequencing batch reactor (SBR), operating under a periodic feast-famine regime, to accomplish simultaneously wastewater treatment and selection of PHA-accumulating microbes, followed by a batch reactor for the production of PHA-rich biomass. The SBRs were efficient at removing soluble carbon (84%), ammonia (100%), and phosphorus (76%). Meanwhile, PHA-accumulating microbes were enriched under the SBR operating conditions, and PHA content on a cell-weight basis was within the range 7 to 11% in nonfiltered wastewater and 2 to 8% in filtered wastewater. Subsequently, batch studies were implemented with varying loading rates, ranging from 0.4 to 3.2 food-to-microorganism ratios. A maximum 20% PHA content on a cell-weight basis was obtained. Based on the experimental results, a PHA biosynthesis-degradation kinetic model was developed to (1) aid in the design of a pilot- or full-scale PHA production process coupled with wastewater treatment and (2) determine optimal conditions for harvest of PHA-rich biomass.